BI Upgrade from 7.0 EHP1 to 7.3

Hi All,
Our BI ABAP is on 7.0 EHP1. We are planning to upgrade it to BI 7.3.
Doubts:
1. I am looking for BI specific upgrade document.
2. And the SAPup tool version to be used for this and any related document for this.
3. Is there any known issues after upgrade to BI 7.3
Thanks
Goldy

Hi,
please check below thread for same discussion:
BI Upgrade from 7.0 EHP1 to BI 7.3
Thanks
Sunny

Similar Messages

Upgrade from PI 7.0 SP18 to PI 7.1 EHP1

Hi all,
                                                                                I'm performing an Upgrade from Netweaver PI 7.0 SP18 to PI 7.1 EHP1.
I've checked all the notes ragarding any known issuses about the process BUT....
Here's the problem: in Phase TR_CMDIMPORT_PREPARE ( during the Support Package Import ) the upgrade stops with this error:
ERROR: 339 errors detected during TR_CMDIMPORT_PREPARE.
       Errors are accumulated in file PCMDIMP.ELG.
PCMDIMP.ELG shows problems related to R3trans version, but, as you can see, my version is newer:
"2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19."
What could possibly be wrong?
Notice that in my download directory I've put:
the latest Upgrade Correction ( NW711_19-10007578.SAR ).
the latest Kernel ( 711 46 )
the latest EHP1 Support Package ( 03 )
the latest SAPup: 7.10/5 29.003 ( as suggested by note 1156185. I know it's 7.10, not 7.11 but the note it's clear on that. Anyway i tried, unsuccessfully, without the SUPup, so.... )
I use the following media:
NW PI 7.1 EHP1 Upgrade Master 51036470
NW 7.11 IM/Kernel/TREX WIN x64, IA64 51036476
NW AS ABAP 7.1 EHP1 Language 51036707
I even tried to use the original Kernel from the DVD...
Any suggestion?
Thanks and Regards,
Andrea
P.S. Partial PCMDIMP.ELG file :
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71101INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71102INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71103INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
1 ETP111 exit code           : "8"
Edited by: Andrea Campo on Sep 23, 2009 2:37 PM
Edited by: Andrea Campo on Sep 23, 2009 2:38 PM

This is part of SAPL-71103INPIBASIS.JIM:-------
4 EPU201XBEGIN OF SECTION BEING ANALYZED
1 ETP199X######################################
1 ETP179 CREATE COFILE FROM DATAFILE
1 ETP101 transport order     : "SAPK-71103INPIBASIS"
1 ETP102 system              : "JIM"
1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.EXE"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 23.09.2009 - 12:47:46
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 4904 on srvsvi-w037v (APServiceJIM)
4 ETW000 > createcofile
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 >
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -w
E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time        : 23.09.2009 - 12:47:46
4 ETW000 function         : CREATECOFILE
4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 buffersync       : NO
4 ETW000 clients          : default
4 ETW000 commit           : -1
4 ETW000 table cache      : dynamic
4 ETW000
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000   with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
3 ETW692 "SAPK-71103INPIBASIS "
3 ETW708 "000"
3 ETW695 "D"
3 ETW694 "SAP       "
3 ETW693 "SAP         "
3 ETW696 "20090609"
3 ETW713 "PI_BASIS Support Package 03 for 7.11                        "
3 ETW691 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924
3 ETW707 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924
3 ETW691 "LIMUCLSD/SCMB/CA_DF_ATTR_QTY
3 ETW707 "R3TRCLAS/SCMB/CA_DF_ATTR_QTY"
4 ETW000 809204 bytes read.
4 ETW000 Transport overhead 17.1 %.
4 ETW000 Data compressed to 7.0 %.
4 ETW000 Duration: 0 sec (809204 bytes/sec).
3 ETW710 "0" "0"
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 23.09.2009 - 12:47:46
1 ETP179 CREATE COFILE FROM DATAFILE
1 ETP110 end date and time   : "20090923124746"
1 ETP111 exit code           : "0"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order     : "SAPK-71103INPIBASIS"
1 ETP102 system              : "JIM"
1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 23.09.2009 - 12:49:20
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 7740 on srvsvi-w037v (jimadm)
4 ETW000 > import
4 ETW000 > buffersync=no
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 > importtruncated = yes
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 active unconditional modes: 26
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
SYSTEM = 'JIM'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time        : 23.09.2009 - 12:49:20
4 ETW000 function         : IMPORT
4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 Continuation     : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
4 ETW000 buffersync       : NO
4 ETW000 clients          : cascade
4 ETW000 repeatimport     : YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimport   : NO
4 ETW000 c.s.i.           : NO
4 ETW000 importtruncated : YES (imported data may be destroyed!)
4 ETW000 charsetadapt     : YES
4 ETW000 def. charset     : WEUROPEAN
4 ETW000 commit           : 100000
4 ETW000 table cache      : dynamic
4 ETW000 INCLUDING        : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000   with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
4 ETW000 switching to selective language import
4 ETW000 the following languages will be imported: DEI
4 ETW000 Used Commandfile SAPK-71103INPIBASIS (SAPUSER/140)
4 ETW000 This is a patch transport.
4 ETW000   1 entry for E070 updated (SAPK-71103INPIBASIS).
4 ETW000 140 entries for E071 inserted (SAPK-71103INPIBASIS *).
4 ETW000   1 entry for E071K inserted (SAPK-71103INPIBASIS *).
4 ETW000   1 entry for E071KF inserted (SAPK-71103INPIBASIS *).
4 ETW000   1 entry for E070C inserted (SAPK-71103INPIBASIS).
4 ETW000   1 entry for E07T updated (SAPK-71103INPIBASIS *).
4 ETW690 COMMIT "103098" "103098"
3WETW000 different nametabs for table ENHOBJ (field ENHOBJTYPE).
3WETW000 key field truncated
3WETW000   Key field is not in NTAB.
4 ETW000      table ENHOBJ: entry in DB is 2 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
3WETW000 different nametabs for table TRDIR (field TROBJECT_TYPE).
4 ETW000       Field is not in NTAB.
3WETW000 different nametabs for table TRDIR (field TROBJECT_NAME).
3WETW000 different nametabs for table SPROXREG (field IFR_IDEMPOTENT).
[u2026]
4 ETW000       Field is not in NTAB.
4 ETW000      table SPROXREG: entry in DB is 2 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
3 ETW677 "R3TRCLAS/SCMB/CL_DF_ARCH_ADD_TABLE" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
[u2026]
4 ETW000 no entries for PAK_RUNTIME_ENV will be imported in this step.
3 ETW677 "R3TRDEVC/SCMB/FLOW" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
3 ETW677 "R3TRDEVC/SCMB/FLOW_NET" not imported in this step.
3 ETW677 "R3TRDSYSSIMGASC0TSAI" not imported in this step.
3WETW000 different nametabs for table ENHLOG (field ENHTOOLTYPE).
4 ETW000       Field is not in NTAB.
4 ETW000      table ENHLOG: entry in DB is 20 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
3 ETW677 "R3TRENHO/SCMB/ARC_DOCFLOW_ADD_TABLE" not imported in this step.
3 ETW677 "R3TRFUGR/SCMB/DF_ARCHIVE" not imported in this step.
3 ETW677 "R3TRFUGRRSC2" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
4 ETW109 table "PAK_INTF_CONTENT" does not exist in nametab.
4 ETW000 no entries for PAK_INTF_CONTENT will be imported in this step.
3 ETW677 "R3TRPINF/SCMB/FLOW_API_DOCUMENT" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
3 ETW677 "R3TRPINF/SCMB/FLOW_API_NET" not imported in this step.
4 ETW000 SAPK-71103INPIBASIS touched.
4 ETW690 COMMIT "128" "103226"
4 ETW000 809204 bytes read.
4 ETW000 Transport overhead 17.1 %.
4 ETW000 Data compressed to 7.0 %.
4 ETW000 Duration: 0 sec (809204 bytes/sec).
3 ETW710 "0" "0"
4 ETW000
4 ETW000 Summary:
4 ETW000
4 ETW000   1 COMML imported.
4 ETW000   1 COMMT imported.
4 ETW000 Totally 2 Objects imported.
4 ETW000
4 ETW000 103226 bytes modified in database.
4 ETW000 [dev trc     ,00000] Disconnecting from ALL connections:
264239 0.264239
4 ETW000 [dev trc     ,00000] Disconnected from connection 0
4041 0.268280
4 ETW000 [dev trc     ,00000] statistics db_con_commit (com_total=3, com_tx=3)
4 ETW000
31 0.268311
4 ETW000 [dev trc     ,00000] statistics db_con_rollback (roll_total=0,
roll_tx=0)
4 ETW000
23 0.268334
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 23.09.2009 - 12:49:20
4 ETW000 34 warnings occured.
4 ETW000 4 errors occured.
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time   : "20090923124920"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order     : "SAPK-71103INPIBASIS"
1 ETP102 system              : "JIM"
1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 23.09.2009 - 13:57:11
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 5540 on srvsvi-w037v (jimadm)
4 ETW000 > import
4 ETW000 > buffersync=no
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 > importtruncated = yes
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 active unconditional modes: 26
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
SYSTEM = 'JIM'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time        : 23.09.2009 - 13:57:11
4 ETW000 function         : IMPORT
4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 Continuation     : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
4 ETW000 buffersync       : NO
4 ETW000 clients          : cascade
4 ETW000 repeatimport     : YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimport   : NO
4 ETW000 c.s.i.           : NO
4 ETW000 importtruncated : YES (imported data may be destroyed!)
4 ETW000 charsetadapt     : YES
4 ETW000 def. charset     : WEUROPEAN
4 ETW000 commit           : 100000
4 ETW000 table cache      : dynamic
4 ETW000 INCLUDING        : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000   with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
[u2026]
roll_tx=0)
4 ETW000
23 0.228932
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 23.09.2009 - 13:57:11
4 ETW000 34 warnings occured.
4 ETW000 4 errors occured.
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time   : "20090923135712"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED

Upgrading from PI 7.1 to PI 7.1 Ehp1

Hi,
We are planing to upgrade from PI7.1 SP7 to PI 7.1 EHP1.
How much time will take to do complete upgrade -
After upgrade doe's it will effect any EDI scenario's or webserice scenario's
and what kind of issues we may face while doing upgrade.
and what else precations we need to take care.
If there any docuemnt upgradeing from PI 7.1 to EHP1 please provide me the link.
appriciate your help.
Regards,
Venu.

Hi Venu,
Please refer this link , it will give you insight to PI 7.1 EHP1 details.
SAP Enhancement Package 1 for SAP NetWeaver Process Integration 7.1 - Details [original link is broken]
regards,
Srinivas

How to upgrade from Solman 7.0 to 7.0 EHP1?

Hi,
In the SAP note 1169247, it talks about doing the upgrade from 7.0 to EHP1 using SAINT and JSPM. But in the Upgrade Guide SAP Enhancement Package 1 for Solution Manager 7.0 - UNIX Oracle˝, it talks about running the upgrade using an Upgrade MAster DVD.
1. Now is this the same as the EHP installer? If so, why is it not mentioned anywhere in the upgrade guide that we have to use EHPI? If not, what is this Upgrade Master installer?
2. Should I use SAINT/JSPM for the upgrade to solman 7.01?
Your answers to these questions will be highly appreciated.
Thanks,
Ajay

Hi Ajay,
I had the same question a few day's ago.
The difference between these two methods are the word updarte and upgrade.
If you are on Solman 7.0 you have to do a update with SPAM/SAINT.
If you are on Solman 3.0 or something you have to do a upgrade with the master dvds. You can read this on one of the first sites of the upgrade guide.
So you have to use SPAM/SAINT, and the Update Guide for EHP1 Using SPAM/SAINT will help you.
[Update Guide on Marketplace|https://websmp101.sap-ag.de/~sapidb/011000358700000427772009E.PDF]
Regards
Tobias

How to upgrade from PI 7.1 SP8 to PI EhP1

Hello
We plan to upgrade from PI 7.1 SP8 to PI 7.1 EhP1,but we do not know how to apply it. ..
Please tell us the obtaining destination of the material of the installation guide etc.
any other info that you can share.

refer this link for details about new features for Enhancement Package 1 of the new release SAP NetWeaver Process Integration 7.1 will be presented. This will cover the new functions planned for the Enterprise Services Repository , Services Registry, and the Service Bus.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b054300d-6b36-2b10-6187-86065808e88e]

ABAP/J2EE upgrade from 7.0 to EHP1...failed at START_J2EE_EP

Hi experts,
I'm currently running a dual stack upgrade from 7.0 to EHP1 SR1 on a 32bit windows system. I'm using SAPup and Jup and I'm currently stuck on the Java step START_J2EE_EP the main clue I get from the logs is "Can't open shared memory administration (rc = 3)"......there's also another similar message with a different return code - " Can't open shared memory administration (rc = -107)"....
I can't seem to find anything that has resolved the problem.
Any help would be much appreciated.
Cheers,
JB

Hi Martin,
Thanks for the info.
I basically changed the phase list xml file so that I could skip over this step as well as others that depended on waiting for the events from the parallel ABAP upgrade.
So I was able to finish the uprade successfully. But I tried to update the java stack with the latest support pack stack and it failed part way through. Now my server0 won't start......I'll be posting the problem shortly in a new thread.
Thanks again!
JB

Upgrade from SCM 5.1 to SCM 7.0 SR1 (with NW 7.0 EHP1 SR1)

Hi folks,
we are trying to upgrade our SCM5.1 to SCM 7.0 SR1. There seems to be a problem in the phase, where SAPup is trying to detect the needed CDs / DVDs. SAPup recognizes that "FRP" is used within the system. There appears a dialog to enter the mount points for the DVDs required for the upgrade.
It says <<Enter at least the mount point for the DVD titled "FRP Software DVD">>. All other needed media is accepted, but not the DVD with the FRP-Software.
SAP Note "1300960" explains, that as of SAP Business Suite 2008 onward, no media without a MID.XML file will be accepted for upgrades (e.g. media containing Add-Ons).
I have opended a message to SAP Support, but there is no solution / workaround until now. I cannot skip the phase and therefore it is not possible to launch / continue the entire upgrade.
SAPup Version is "7.10/7, build 31.010 for UNICODE"
Has anyone faced the same problem with no-MID.XML based media?
Thank you for any advice!
Kind regards,
Marcel Jentsch

Hi,
We just upgraded from SCM 5.0 to 7.0 sp9.
You need not deactivate the DP planning areas before upgrade.
We did not face any issues because of this.
Regards,
Ashok

Upgrade from NW 7.0 EHP1 to NW 7.3

Hi All,
I am upgrading NW 7.0 EHP1 to NW 7.3 and reached the downtime phase.
I got halted by an error in UNDEPLOY_THE_OLD_DB_CONTENT phase of downtime step.
The logs are as follows :
UNDEPLOY_THE_OLD_DB_CONTENT_UTO_01.LOG
Aug 31, 2011 5:47:16 AM Info: com.sap.sdt.j710.db.DBContentUtilImpl [Threadmain,5,main]: T
he /usr/sap/EHD/JC00/SDM/root/origin/sap.com/tc/TechSrv/XML_DAS_Init/SAP AG/0/7.0103.20081105085233.0000/XML_DAS_Init.sda sda archive will be undeploy.
Aug 31, 2011 5:47:16 AM Error: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:883) [Threadmain,5,main]:
Exception has occurred during the execution of the phase.
Aug 31, 2011 5:47:16 AM Error: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:884) [Threadmain,5,main]:
java.io.FileNotFoundException: testconn.log (No such file or directory)
Aug 31, 2011 5:47:16 AM Error: com.sap.sdt.j710.db.DBContentUtilImpl.undeploySDAContent(DBContentUtilImpl.java:131) [Threadmain,5,main]:
java.io.FileNotFoundException: testconn.log (No such file or directory)
Aug 31, 2011 5:47:16 AM Error: com.sap.sdt.j2ee.phases.PhaseTypeUndeployDBContent.execute(PhaseTypeUndeployDBContent.java:79) [Threadmain,5,main]:
Error during undeployment of DB content. Details:java.io.FileNotFoundException: testconn.log (No such file or directory)
java.io.FileNotFoundException: testconn.log (No such file or directory)
Aug 31, 2011 5:47:16 AM Info: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:925) [Threadmain,5,main]: P
hase UPGRADE/OFFLINE_MIGRATION/UNDEPLOY_THE_OLD_DB_CONTENT has been completed.
I suppose that it is not able to find testconn.log (No such file or directory) but not sure where it will be.
Please provide a solution or workaround.
Thanks

Hi,
The log files are ideally created in the upgrade folder - log subdirectory:
/usr/sap/<SID>/upg/java/log/
Please check in this folder if the file exists. Also check if the read/write permissions to this folder are fine for user <sid>adm. It could be that the file is getting created due to lack of permissions.
Regards,
Srikishan

Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION

Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
Javier

Hi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier

Upgrade from 3.0B (release 620) to BI 7.1 (release 710)

Hi,
Please guide me whether it is possible to upgrade from BW 3.0B system to BI 7.1, I am in release 620 now.
Can you please help me locate upgrade guide for the same?
Looking forward for your replies
Thank you
Rajath

lol
There is nothing called as NW BI 7.1,
I found the upgarde guide for NW 7.0 BI : https://websmp205.sap-ag.de/~sapidb/011000358700001461642008E#q2
in SMP,
We can upgrade to SAP NETWEAVER 7.0 from the following basis release:
SAP BW 2.0B; SAP BW 2.1C; SAP BW 3.0B; SAP BW 3.1 CONTENT;
From there we can install EHP1 for NW 7.0 i.e of basis 701.
Thank you all for taking your time to resolve my problem.
Cheers!
Rajath

Upgrade from CE 7.2 to Portal 7.3 or higher

Hi Experts,
We are planning to upgrade portal from CE7.2 to 7.31 or higher.
First of all I want to know which will be the best version to upgrade from CE7.2 ?
From SAP installation and upgrade guide I can see this will be a simple EHP upgrade if we goes for 7.3 EHP1 .
Now I wan to know after upgrade what will be the effect/issues on below mentioned custom application areas.
1. Portal Branding (theme)
2. CAF components (EJB)
3. Portal custom DB table.
4. BPM applications
5. Service Registry
6. Web services
Please let me know your inputs on this.
Thanks & Regards,
Sambaran Chakraborty

Hi,
Of course upgrade from CE 7.11 to CE 7.2 IS POSSIBLE. We are doing this in our landscape.
Please refer to the following guide:
Update Guide CE 7.2 (Update from CE 7.1/CE 7.1 EHP1) - SP<nn>
from:
service.sap.com/instguidesnwce72 --> Update --> SP<nn>.
Only this one guide is sufficient. This upgrade is just like SPS update.
Regards,
Shitij

Upgrade from R/3 4.7 (Kernel 640 non unicode)

Greetings
In our company we are planning a major upgrade from R/3 Enterprise 4.7 EXT200 (Kernel 640) over Windows 2008 to the latest release available, the thing is i am a little bit confused about what I should suggest since I havenu2019t done much u201Cadvancedu201D stuff besides system copy and ECC installations and some concepts are still unclear to me, like what netweaver means for example.
This is our scenario, we have a R/3 Enterprise 4.7 Ext2.00 (Kernel 640 non unicode) system with Oracle 10.2.0.4 over Windows 2008 SP2 x64 with Microsoft Failover Clustering (DB and App server per separate)
Since thereu2019s no java instance Iu2019m guessing I need to do an upgrade to ECC 6.0 Ehp5 ABAP Only and then do a Java Instance install right?
Whatu2019s the difference between ERP 6.0 EhP5 and Netweaver 7.0 EhP1? Can anyone clear some of this concepts to me?
I thank you in advance for all your kind replies
BRu2019

This is our scenario, we have a R/3 Enterprise 4.7 Ext2.00 (Kernel 640 non unicode) system with Oracle 10.2.0.4 over Windows 2008 SP2 x64 with Microsoft Failover Clustering (DB and App server per separate)
You need to Upgrade SAP R/3 4.7 to ECC (EHP5 or EHP4) whatever version you would like to go for and Oracle to 11G as oracle 10 has been in extended maintenance support
Since thereu2019s no java instance Iu2019m guessing I need to do an upgrade to ECC 6.0 Ehp5 ABAP Only and then do a Java Instance install right?
You don't have to install Java instance, until you have a requirement. If you have other Java system's you can use those systems for ADS and others
Whatu2019s the difference between ERP 6.0 EhP5 and Netweaver 7.0 EhP1? Can anyone clear some of this concepts to me?
*SAP Netweaver is the technology platfrom for all SAP-Based Application, From SAP Netweaver 2004 onwards all the SAP present and future SAP Applications based on Netweaver.
Netweaver has different stacks as follows.
1. People Integration ( Ex: EP, SAP Mobile)
2. Information Integration ( Ex: BI , MDM)
3. Process Integration ( EX: XI )
4. Application Platform (Ex: ABAB & Java engine)
ECC6 is an application component, which will work on with the help of this Technology Platfrom -
formerly SAP Netweaver 2004s and now it is SAP Netweaver 7 which comes with Enhancement packages now*
Regards,
Arjun

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

BI Upgrade from 7.0 EHP1 to 7.3

Similar Messages

Maybe you are looking for