BI Widget - uses too much connections

Hi all,
I'm using BI widgets and it is a very good tool but I cannot find a way in order to do not open a new connection after a Widget refresh. the problem here is the widgets does not close the connection used after each refresh.
has anybody passed by this? I'm ussing BI widgets 3.1 SP3
thanks in advance
note: I know that this can be resolved by increasing the number of maximun connections or by deactivating this functionality but I was wondering if we can resolved this by a "nice way" without put our servers in risks.

Perhaps if you stated the models of cameras. From what I've read if you're connecting the cameras to the CCK, there are sometimes settings on the cameras you need to change to make it work.
I always use mine just with the SD card - saves my camera battery - and I've not had an issue.

Similar Messages

  • Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

    my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

    try resetting the ipad,or change the cable ,it woould work 

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • Camera connection kit w/USB says cannot work uses too much power

    When using the camera connection kit /USB the message cannot use device it uses too much power pops up!

    What are trying to use it with ? If you are connecting it to your camera then does your camera have a setting on it to enable PTP (Picture Transfer Protocol, Pictbridge) or Mass Storage Device ? If you are trying to use a third-party card reader or a flash-drive with the kit to copy photos/videos over to the iPad, then a lot of them require more power than is supplied to the iPad's port - if you have a powered card reader or a single-card reader (i.e. not one that has different slots for different types of memory card) then that might have a better chance of working

  • Camera Connection Kit - Accessory uses too much power

    I am trying to import photos from my Kodak EasyShare M873 via the USB connector from the CCK. About a quarter of the way through the import, the iPad disconnects and states, "The attached accessory is using too much power". Is anyone else getting this. I suppose I could just remove the SD card from the camera everytime I want to import. But then what is the point of having the USB adaptor if the iPad can't handle connecting to a semi-low quality consumer camera?

    The USB cable is great if the battery is full and you don't have a ton of photos, or if the camera either has photos in its "built-in" memory or doesn't use SD.
    PERSONALLY I'm glad they included both, but plan to use only the SD adapter on trips.
    Doug
    PS: It might be interesting, though probably camera-specific, to compare transfers times both ways...

  • HT4101 When I connect using the USB version I get a message on the ipad saying "the attached accessory uses too much power. What can I do?

    Ipad2 Camera Connection Kit
    When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
    What should I do please?
    David

    I believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
     Cheers, Tom

  • HT4101 My ipad says the device uses too much power when I connect my camera

    I brought my ipad 2 on holidays and have purchased the camera connection kit.  I tried to download my photos and an error message came up saying that the device uses too much power!    My ipad is powered up to 100% and I have closed any open files and it still says the same thing?  Does this actually work or do I have to return it?

    What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?

  • I bought a camera connection kit , while connecting my camera (Samsung ex1) , I got this message from my iPad "my attached accessories using too much power "

    I bought a camera connection kit but fail to connect to my iPad . My iPad prompt me that my attached device using too much power ! I got no problem using the SD connecting kit. My camera is Samsung EX1 , pls advise

    Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?

  • HT4101 When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome tis

    When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?

    You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.

  • Camera Connection Kit "Using Too Much Power" Error

    I'm trying to connect my iPhone 6 to my iPad Air 2 using the Apple USB Camera Connection Kit so I can transfer some video files.  I get an error that says "Accessory Unavailable - The Attached Accessory Uses Too Much Power".  Both devices are running the latest version of iOS.  I've tried hard reboots on both and no change.  This used to work fine with my iPad 2.  Is my camera connection kit defective?

    My camera just started doing this on my MBP too! I have no idea what to do

  • I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

    I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

    You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • OIM 11g using too much memory and not releasing it when shutting down

    Hello,
    we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
    We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
    So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
    Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
    Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
    Thank you

    You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
    I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
    Sunny Tsang

  • Camera uses too much power error.

    I have the iPad connection kit but get error camera uses too much power. How do I resolve this?

    Some cameras do this & there's nothing you can do. Use the camera's SD card instead.
     Cheers, Tom

  • IPad won't sync. Using "too much power". Help?

    When I go to plug my 4th gen iPad into my Macbook Pro, it says I need to unplug the USB device using too much power, referring to my iPad. It has always worked before but as of late i have not been able to connect my iPad in order to sync it. Any Help, thoughts, suggestions greatly appreciated.

    Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?

  • When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?

    When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?

    1. Turn off iPad
    2. Connect camera to iPad
    3. Turn on power of camera
    4. Turn on iPad

Maybe you are looking for