BI Widgets - The host cannot be connected

Hello
I get an error when I try to connect to SAP BusinessObjects XI 3.1 SP2 from BOBJ BI Widgets SP2.
I get this error with SAP BusinessObjects XI 3.1 SP2. When I had SAP BusinessObjects XI 3.1 SP1 BI Widgets works fine. But now I get this error:
Login exception (Error: FWM 01003). Server <servername> not found or server may be down (FWM 01003)#
In Host and Login Preferences I put Host Name and Host URL next this screen show me "Connecting to URL successfully". Next I put User Name, Password and Authentication and click in OK. The error appear.
I applied this SAP notes, but BI Widgets does not work.
1255097, 1288027.
Best Regards,
Paulina

Hi Ranjit
Please check if cross domain is put in BusinessObjects Server in this directory: C:Program Files (x86)Business ObjectsTomcat55webappsROOT
cross domain is a file "crossdomain.xml" it should be like that
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="" headers="" secure="false" />
<allow-access-from domain="*" secure="false" />
</cross-domain-policy>
If you don't get this file. Open a notepad, copy the last code and save it with this name "crossdomain.xml". I think it should work.
Regards,
Paulina Villací

Similar Messages

  • Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached."  Has anyone else had this?

    Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached."  Has anyone else had this problem

    I'm having the same issue.  Haven't found a workaround.  I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV.  For whatever reason, the two AirportExpress that I have in a different rooms cut out.  I only have 600 square foot apartment so it's not that big, the signal should be strong enough.  Airport Utilitiy reports the signal strength to be strong on all devices.
    I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software.  Very frustrating.  My Airplay used to work very nice and now I'm constantly having issues and restarting my network.  I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
    The only workaround I found so far is to unplug the devices and to plug them back in.  Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week.  Very annoying.

  • How can I get my iPod to update when it says the server cannot be connected?

    Whenever I try to update my iPod it says, "The iPod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." It does this every time. How can I get it to update? Any help is much appreciated, thanks!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • TS1286 wen i m connecting my ipad to my pc the itunes is showing that the ipad cannot be connected to the ipad. error 0xE8000003

    please help me to solve this

    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • Ive downloaded an album that came with videos, and ever since ive synced my ipod, i cant watch them. all that comes up is, "the URL cannot be connected" or something

    so yeah i bought "Glam Nation Live" (by Adam Lambert) and it came with videos. after i bought the album, i synced to my itunes and now the videos wont play. there will be some weird error code about the URL and then it will close. they were able to play before. how can i fix this?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • GRE tunnel could not be used by the hosts connected to the router

    Hi,
    I am using cisco ASR1013 (RP2) and a Mikrotik Router for setting up a GRE tunnel for LAN to LAN routing over a broadband link. The tunnel works fine (able to ping tunnel end points and also all the connected interfaces on both the Mikrotik and Cisco ASR) but the hosts that are connected directly to the Cisco router interface over a layer 2 cisco switch are unable to connect (ping) the hosts or connected interfaces on the mikrotik side. I am sure its not a mikrotik issue as i dont see any traffic coming through the tunnel using the mikrotik torch utility.  There are no ACL's or firewall rules on any of the devices...... 
    Source and destination of the tunnel are public IP's and are pingable via internet (The tunnel is connected and endpoints are pingable)
    Mikrotik connected interface IP = 192.168.253.1/24
    Mikrotik tunnel end point IP = 192.168.254.1/30
    Cisco tunnel end point IP = 192.168.254.2/30
    Connected cisco subnet to reach Mikrotik = M.N.O.32/28
    Cisco interface IP for LAN = M.N.O.33
    Test host IP on the LAN subnet = M.N.O.34
    The below is my Cisco config
    ASR-1#sh run int tun 1
    Building configuration...
    Current configuration : 144 bytes
    interface Tunnel1
     ip address 192.168.254.2 255.255.255.252
     ip mtu 1400
     tunnel source A.B.C.D
     tunnel destination W.X.Y.Z
    end
    ASR-1#sh run int g0/1/7
    Building configuration...
    Current configuration : 280 bytes
    interface GigabitEthernet0/1/7
     description LAN
     ip address M.N.O.33 255.255.255.240
     ip verify unicast source reachable-via rx
     no negotiation auto
     cdp enable
    end
    ASR-1#sh ip ro 192.168.253.1
    Routing entry for 192.168.253.0/24
      Known via "static", distance 1, metric 0 (connected)
      Routing Descriptor Blocks:
      * directly connected, via Tunnel1
          Route metric is 0, traffic share count is 1
    ASR-1#ping 192.168.253.1 so M.N.O.33
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 192.168.253.1, timeout is 2 seconds:
    Packet sent with a source address of M.N.O.33 
    Success rate is 100 percent (5/5), round-trip min/avg/max = 5/5/6 ms
    ASR-1#pi M.N.O.34
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to M.N.O.34, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    If i try to ping 192.168.253.1 (network connected to Mikrotik) from the host M.N.O.34 (the gateway of this host is M.N.O.33 - Int g0/1/7 of the Cisco ASR), i cannot reach detination - request timed out.... Below are the results of trace and ping from the host connected to ASR G1/0/7
    PING TO THE GATEWAY *********
    [root@localhost ~]# ping M.N.O.33
    PING M.N.O.33 (M.N.O.33) 56(84) bytes of data.
    64 bytes from M.N.O.33: icmp_seq=1 ttl=255 time=0.161 ms
    64 bytes from M.N.O.33: icmp_seq=2 ttl=255 time=0.143 ms
    ^C
    --- M.N.O.33 ping statistics ---
    2 packets transmitted, 2 received, 0% packet loss, time 1357ms
    rtt min/avg/max/mdev = 0.143/0.152/0.161/0.009 ms
    PING TO THE TUNNEL END POINT IN CISCO ASR
    [root@localhost ~]# ping 192.168.254.2
    PING 192.168.254.2 (192.168.254.2) 56(84) bytes of data.
    64 bytes from 192.168.254.2: icmp_seq=1 ttl=255 time=0.141 ms
    64 bytes from 192.168.254.2: icmp_seq=2 ttl=255 time=0.141 ms
    ^C
    --- 192.168.254.2 ping statistics ---
    2 packets transmitted, 2 received, 0% packet loss, time 1739ms
    rtt min/avg/max/mdev = 0.141/0.141/0.141/0.000 ms
    PING TO THE TUNNEL ENDPOINT IN MIKROTIK
    [root@localhost ~]# ping 192.168.254.1
    PING 192.168.254.1 (192.168.254.1) 56(84) bytes of data.
    ^C
    --- 192.168.254.1 ping statistics ---
    11 packets transmitted, 0 received, 100% packet loss, time 10413ms
    PING TO THE CONNECTED INTERFACE ON MIKROTIK
    [root@localhost ~]# ping 192.168.253.1
    PING 192.168.253.1 (192.168.253.1) 56(84) bytes of data.
    ^C
    --- 192.168.253.1 ping statistics ---
    4 packets transmitted, 0 received, 100% packet loss, time 3641ms
    TRACE TO THE CONNECTED INTERFACE ON MIKROTIK
    [root@localhost ~]# traceroute 192.168.253.1
    traceroute to 192.168.253.1 (192.168.253.1), 30 hops max, 60 byte packets
     1  M.N.O.33 (M.N.O.33)  0.180 ms  0.156 ms  0.145 ms
     2  * * *
     3  * * *
     4  * * *
     5  * * *
    Please help

    Hi,
    Sorry for the delayed response ....Both ends static routes are added for the connected test interfaces.....
    Regards,
    Mahesh 

  • In my small office ethernet network all of a sudden one of my imacs cannot be connected to. It can connect to all other computers and can access internet, but as soon as someone tries to connect to that mac, it disconnects from the network. Any ideas

    I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?

    Hi orangekay
    not sure where you got the idea that I have
    bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
    because I do not have any such running, just normal Applescripts that do tasks that could be done by hand.

  • Directories on 2 machines. Connect to 1 using console program on the other : "Cannot connect to the Admin Server.The url is not correct or the server is not running." URL is ok, server  is running.

     

    Which version of iDS ?
    Could you show us the URL ?
    I think 4.x Admin Server has the IP address of the hosts that can connect in its configuration. If both servers have 2 different configuration Directory and 2 admin servers, that is eventually where to look for a solution.
    Regards,
    Ludovic.

  • DMVPN - Host have no connectivity

    I have an unusual situation. We have two Cisco 2621XM's configured with DMVPN in a hub and spoke fashion. We are using DMVPN using DSL as a backup for our T-1 to the spoke site. The tunnel comes uo with no problem. From the router of the spoke I can ping anything across the tunnel on the remote network. From the switch or host connected to the switch at the spoke router I can't ping across the tunnel. A "show route" on the hub list the networks "vlans" configured on the spoke router, the spoke router ans switch is setup in a router-on-a-stick fashion.
    Thanks in Advance!

    Hi,
    after some changes, the WLC can now reach the public DNS server.
    However, the hosts cannot do anything. (no nslookup, no ping)
    I removed web-authentication from the WLAN config to simplify troubleshooting, but even so, the result is the same.
    Host receives IP address and DNS server.
    When I do a packet tracer on the outside context, from the guest (wifi) segment to the DNS, I see the packet is dropped.
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: DROP
    Config:
    Implicit Rule
    my config is:
    object network Guest_wireless
    subnet 192.168.100.0 255.255.255.0
    access-list GUEST extended permit ip object Guest_wireless any
    access-list GUEST extended permit icmp object Guest_wireless any
    access-group GUEST in interface Guest_wireless
    interface GigabitEthernet0/3.2
    nameif Guest_wireless
    security-level 40
    ip address 192.168.100.254 255.255.255.0 standby 192.168.100.253
    object network Guest_wireless
    nat (dmz,outside) dynamic "public ip"
    Thanks

  • Cannot startup connection pool  no suitable driver /WLS 6.1 SP4

    hi all,
    i got a problem in creating a ConnectionPool with weblogic 6.1 sp4.
    my connection pool has following config data:
    URL:jdbc:oracle:[email protected]:1521:ESECD7
    Driver:oracle.jdbc.driver.OracleDriver
    props
    username=aaaa
    password=bbbb
    in my startWebLogic.cmd i have following classpath:
    set PATH=.\bin;%PATH%;c:\bea\wlserver6.1\config\mydomain;c:\bea\wlserver6.1\bin\oci817_8;c:\oracle\ora92\bin;%PATH%
    set CLASSPATH=C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\jdbc\lib\classes12.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;c:\bea\jolt.jar;c:\bea\joltwls.jar;c:\bea\joltjse.jar
    but i keep on gettign the exception Cannot startup connection pool.. no suitable
    driver
    to me it looks like everything is in classpath...
    any ideas?
    regards
    marco

    Marco wrote:
    hi all,
    i got a problem in creating a ConnectionPool with weblogic 6.1 sp4.
    my connection pool has following config data:
    URL:jdbc:oracle:[email protected]:1521:ESECD7
    Driver:oracle.jdbc.driver.OracleDriver
    props
    username=aaaa
    password=bbbb
    in my startWebLogic.cmd i have following classpath:
    set PATH=.\bin;%PATH%;c:\bea\wlserver6.1\config\mydomain;c:\bea\wlserver6.1\bin\oci817_8;c:\oracle\ora92\bin;%PATH%
    set CLASSPATH=C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\jdbc\lib\classes12.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;c:\bea\jolt.jar;c:\bea\joltwls.jar;c:\bea\joltjse.jar
    but i keep on gettign the exception Cannot startup connection pool.. no suitable
    driver
    to me it looks like everything is in classpath...
    any ideas?
    regards
    marcoHi. Read the weblogi startServer script, and the startWLS script it calls. These
    scripts build up a string which is added to the java commandline that starts
    the server, with an argument -classpath ....... Unless the driver shows up there,
    the server doesn't see it.
    However, we already include a version of the oracle thin driver. It may not be
    the best (it's old), so you will want to make sure you version gets in to the classpath
    argument ahead of our stuff, but the old driver would have been invoked...
    Therefore, I suspect your URL is not exactly correct. Please verify that this exact URL
    works in a simple standalone JDBC program using the driver you want, without any
    weblogic code in the picture.
    thanks,
    Joe

  • When i get on my phone and and go to my mail it says that the server is not connected

    When i get on my phone and go to email sign it says the server cannot be connected?  Then when I enter for updates it goes back and forth to the icloud and apple id and arent they both the same?

    where do i get answers?

  • Call cannot get connected

    UCMA app receives an incoming call, but it cannot get connected.
    the following is the states of that call:
    Underlying call state changed from Incoming to Establishing
    Underlying call state changed from Establishing to Terminating
    Underlying call state changed from Terminating to Terminated
    The following is the exception encountered:
    Request is already terminated  FailureReason = 0 Microsoft.Rtc.Collaboration.CallOperationFailureException:Request is already terminated ---> Microsoft.Rtc.Collaboration.OfferAnswerException:Request is already terminated
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Collaboration.ComponentModel.MediaProvider.EndGetAnswerInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.Call.EstablishCoreAsyncResult.OfferAnswerRequestCompleted(IAsyncResult result) Detected at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
       at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Signaling.RealTimeException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.OfferAnswerException..ctor(OfferAnswerFailureReason reason, String message, Exception innerException, IEnumerable`1 signalingHeaders, DiagnosticsInformation diagnosticsInformation)
       at Microsoft.Rtc.Collaboration.AudioVideo.MediaSessionAgent.CreateOfferAnswerException(OfferAnswerFailureReason type, Exception e, UInt32 errorCode, RtpEndpoint endpointForDiagBlob)
       at Microsoft.Rtc.Collaboration.AudioVideo.MediaSessionAgent.TerminateAllPendingAsyncResults()
       at Microsoft.Rtc.Collaboration.AudioVideo.MediaSessionAgent.TerminateMediaSession(TerminateMediaSessionWorkitemAsyncResult workitem)
       at Microsoft.Rtc.Signaling.WorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    --- End of inner exception stack trace ---
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.Call.EndAcceptCore(IAsyncResult result)
    Do you know what causes that exception?
    I want to enable Lync Server Centralized Logging Services, which scenario should I run? The AlwaysOn Scenario?
    Thank you.

    Michael,
    Those are not test calls but real calls made by our costumers.
    The costumers dial the toll free number and the Internet service provider or SIP provider sends the call to our Lync pools. The call is cancelled a few seconds after it is initiated, sometimes 6 seconds, sometimes 9 seconds, sometimes 20 seconds or longer.
    We called the costumers and made sure that it was not the costumer who hung up the call.
    And we are also sure that an IP address outside our Lync pool sends the CANCEL request. Our system has been working well for a long time but the resent few months this kind of error happens almost everyday in the morning. When the error happens, some
    of the calls cannot get connected and some of the calls are good, but the load of the Lync pool, UCMA app pool is not heavy. A few minutes later, everything becomes normal, no error happens.
    How should we do the trouble shooting? Where should we focus on?  The SIP provider or Lync pool?
    Thank you for your help.
    Jrjack

  • I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

    I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
    Mac OS 10.8.5
    None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
    I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

    Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works!   Although I know there maybe also some other dialog box I have never seen
    Of course I saw that menu item "Import"  and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same:  "Why would I want to export my entire website?".
    An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are  obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

  • An FTP Error occured - cannot make connection to host. No response from the server

    "An FTP Error occured - cannot make connection to host. No response from the server".
    As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

    Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
    See if the 'timeout' issue could be at play here:
    http://forums.adobe.com/message/708941#708941

  • Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

    Hello,
    I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance.  I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server.  However when going thru ISA I receive the
    following Error.
    Power View  Cannot connect to the server due to a security issue.  The server may not have been able to match the host for Silverlight.  This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
    I've seen a couple references to this issue but not much.  This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that.  http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
    Any Ideas?  Thanks.
    Ryan

    Hi Ryan,
    Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

Maybe you are looking for