BI Wizard in 70

Hi, I'm on BI 7.0 sp9 and I don't see how to access the BI Wizard. Particularly I can't see the "List off Web Items and BI Patterns Tab Page" as listed in the instructions for step 2.
Any ideas?
Integration
The pattern wizard is an integral part of the Web Application Designer and does not require any additional installation. You can call the pattern wizard as follows in the Web Application Designer:
1. In the Web Application Designer menu bar, choose Web Template New.
2. On the List of All Web Items and BI Patterns tab page, choose a BI pattern from under the BI Patterns with Pattern Wizard node. The pattern wizard is started automatically.
Prerequisites
The pattern wizard is available as of SAP NetWeaver 2004s Support Package Stack 9.
Thanks

Hi Kenneth,
You need to change an entry in a table for this tab to become visible.
Check note 985119 for this.
regards,
Olav

Similar Messages

I am trying to install, but the install wizard insists on installing on a nonexistant D:/ drive, and when i try to change it, it gives me error 2330. any ideas?

I am trying to run iTunes on a PC with Windows 8.1, but the setup wizard tells me there is no space on the D:/ drive, which makes sense, since my D:/ drive is a CD-ROM. When it gives me the option to save on a different drive, I click it, and it tells me "Error 2330" and shuts down. Error 2330 simply implies that the drive is incompatible, which makes sense but isn't helpful. I even tried disconnecting the CD-ROM but that didn't change anything.
It is very odd that I have had iTunes on this computer for over seven months, and this problem didn't begin until after I attempted to install the latest update. It failed to install the update, and from then on I couldn't open iTunes at all. Has anyone else seen this issue or know what I can do?

I am trying to run iTunes on a PC with Windows 8.1, but the setup wizard tells me there is no space on the D:/ drive, which makes sense, since my D:/ drive is a CD-ROM.
Even though you're getting a slightly different error message, try the following user tip:
"Invalid drive X:\" install errors

Dunning wizard

Hi all,
I'm starting to use Dunning Wizard and I'm having a problem in step 5 (Recomendation Report).
In Dunning Term and in Dunning Letter Method i want "One letter per BP". Also I have selected "Apply Letter Template by Highest Level ". In Dunning Levels, I have 3 Letter templates.
I'm testing only with two costumers.
When I reach step 5 I have costumer1 with 3 Invoices and Costumer2 with 1 invoice.
I want to use Letter number 2 in both costumers. In Costumer1 I enter 2 Print Preview and no problem. Letter number 2 is printed.
In costumer2 i also enter 2 but in Print Preview letter number 1 is printed. I want letter number 2.
If the costumer has more than 1 document what I enter in the Level field is what I get in Print Preview. If the costumer has only 1 document what I enter in Level field is ignored and always letter number 1 is printed.
I think that it's not correct.
Does anybody now some workaround?
Best Regards,
Augusto Sila

Hi Gordon,
Thank you for your answer.
I don't understand this logic.
In costumer1 I have 3 Invoices and the highest level is 1. If I change to 2, this indicates that I want to print the Letter number 2, SAP B1 changes this to the Highest Level and prints letter number 2.
In costumer2 I also want to print letter number 2 but SAP B1 doesn't let me because I only have 1 document. I think this isn't correct.
I want to print letter number 2 for costumer2.
Regards,
Augusto Silva

Error while adding a attribute to the the Custom view through a wizard

Hi ,
I have created a new custom view with value node through wizard succesfully.
Now I want to add a new attribute to that node.I am trying to do that by a wizard.
But i am getting the follwing error " Error during analysis of Source Code" although i have
commented or removed my all custom code from that view.
I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
"GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
Plz help me with this asap.
Regards,
Sharad

Hi Sharad,
I hope all your classes are active. In case you want to add a new attribute there are two steps.
1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
By using any of the two approaches you will be able to see teh new field in the configuration.
Hope this helps.
Regards,
Ruby.

Js-error while executing Multiple Image Upload wizard

If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peter

That again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Rwbld60.exe error while calling a graph wizard from reports 6i.

Hi,
I have a latest patch 4f installed on my machine for reports 6i. When i call a graph wizard from my reports i am getting a program error saying "rwbld60.exe has generated errors".
How do i confirm that my new patch is installed successfully.
Thanks in adv.
Shailesh

I'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one.

Windows Vista - iPod Nano charges, setup wizard will not start

Help!
I have a new PC, and it's Windows Vista.
I have connected my iPod, and it has charged up, but the setup wizard has not come on?
How do I save music to my iPod? My PC recognises it as an iPOD, and I can drag and drop things into it as though it is a storage device. However, my iPod does not recognise this music or photo's when I turn it on and try to play stuff? There are no instructions in the box. It's brand new from argos! Never had one before, so don't know what to do.
Please help.
Curlzy
(Very fed up lady

Sorry you are having problems.
Could it possibly be any security related software that is preventing this ?
* http://kb.mozillazine.org/Installing_Firefox#Windows
Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#'''Windows:'''
#*C:\Program Files\Mozilla Firefox
#*C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These are difficult to recover unless they have been backed up to an external device!
Lets get Firefox installed then deal with any Java problem.
* What is it that you need Java for ??
 see also http://kb.mozillazine.org/JavaScript_is_not_Java

Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

Hi All,
I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
Test Disk 3" as follows:
The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
If you modify the data in the SharedVolumeMappings value in both
0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
and would be prone to errors that could cause further problems.
Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
Many thanks in advance,
Tom

Hi Subhasish,
Thanks for the reply, glad that its something that is reproducible!
Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
VMs?
Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
Thanks again,
Tom

PDF Portfolio SDK setup - Navigator project wizard in Flex Builder 4.6 does not show

Hello, Experts
I am trying to build PDF Custom Navigator using Adobe PDF Portfolio SDK; however, for some reason, when performing step 3 of installation, Navigator project wizard in Flex Builder ( 4.6 ) would not show;
The plugins have been extracted to:
C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
The NavigatorSupport folder has been extracted to:
C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse and ( just in case ) to
C:\Program Files\Adobe\Adobe Flash Builder 4.6\
any advice would be greatly appreciated
Best Regards,
-Alex

as per Joel's recommendation, used 4.5 instead - that worked just fine

You have interrupted the wizard!! (Photoshop CS2)

Okay, lately I've been having problems installing photoshop after trying to create a user account for myself on this damned computer; a friend has supposedly helped me but we'll never know until I'm able to install the program itself... This is where ya'll come in.
I am getting the message:
"The wizard was interrupted before Adobe Photoshop CS2 finished installing..." etc, etc.
I have rebooted twice and even waited a few hours before trying to install and still, I receive the same message.
What do?
WINDOWS 2000
ADOBE PHOTOSHOP CS2

HI,
Photoshop CS2 may not run correctly on a system that doesn't meet the following requirements:
Photoshop CS2 (purchased as a stand alone product)
Intel Xeon, Xeon Dual, Centrino, Pentium class III or 4 processor
Microsoft Windows XP with Service Pack 1 or 2 or Windows 2000 with Service Pack 4
320 MB of RAM (384 MB recommended) *
650 MB of available hard-disk space
1024 x 768 monitor resolution with 16-bit video card
CD-ROM drive
Internet or phone connection required for product activation
Hope This Helps,
Cheers,
Maneet Puri,
LeXolution IT Services

Table or view does not exist - Data Dictionary Import Wizard(Data Modeler)

Hi All,
In Data Modeler, Data Dictionary Import Wizard, I'm able to connect to database.But while going to the second stage (Select Schema/Database), I'm getting an error "ORA-00942: table or view does not exist".
I am able to select the table with select * from all_tables and I can open many tables as well.
Could anyone tell me, whether I'm missing any privilege, that causing this error.
Thanks in advance for you support.
Thanks.

Hi,
Thanks for your response, sorry for my late reply as I was away from my place.
Yes, it is showing "Connection established successfully".
log file as below-
2012-08-02 10:37:26,471 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.1.703
2012-08-02 10:39:42,889 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
Pls see oracle version details-
Oracle Database 11g Enterprise Edition
11.1.0.6.0
64bit Production
Thanks again and waiting for reply.

PI 7.11 - Wizard Configuration

I'm facing an error when trying to run the initial wizard configuration.
Step 402 of 592: Configures the Integration server in the SLD -> Return
Error: CIM_ERR_FAILED: Http response code 501: Not Implemented (Unsupported Protocol Version).

Hi,
Please check the below discussion forum link.
http://scn.sap.com/thread/3245319
http://www.checkupdown.com/status/E501.html
Regards
srinivas

PI 7.11 problem with configuration wizard

hello guys,
during the configuration wizard to use PI functionalty of my PI system I receive a massage regarding the not correct registration of my system into SLD
ABAP technical system 'SID on HOSTNAME\SID' not found . But it's correctly in the abap technical systems.
What could be wrong? Is it related to the fact I performed a NAMED INSTANCE installation with MSSQL ?
anyone of us had the same problem?

Hello Bruno,
Please follow the MANUAL wizard from the link below:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a0/40084136b5f423e10000000a155106/frameset.htm
Perhaps the automatic wizard could lead to a lot of problems.
It should solve the issue with the wizard.
Regards,
Caio Cagnani

PI 7.11 configuraiton wizard nwa issue

Hi
while i am performing configuration of nwa in wizard
i am getting this error
importServerCertificate(): SYSTEM_DOES_NOT_CREATE_TICKETS
i have skiped the step and i have selected the function as PI systems
then i got this error
Error: Execution of Function SCSM_GET_CCMSPING_DESTINATIONS ends with an error (cause:NO_DESTINATIONS_FOUND:, error code:000).
after this finished with skiped steps.
afte this when i browse the nwapi it showing as
No data available to the System Selector
Regards
Vijay

Hi,
May be reading these wil lhelp you
http://wiki.sdn.sap.com/wiki/display/JSTSG/%28NWA%29Problems-102
Re: "No data available to the System Selector" in NW Administrator
Regards,

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Unable to log in to Hyperion Planning App Wizard

Dear All,
Unable to log in to Hyperion Planning App Wizard. This is my new installation. There is no error message in the planing windows. After click on log on button, the page just getting refresh and its come to same page only.
errors in in the planning logs......
<Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 4:36:12 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 4:36:16 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 7:33:45 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
Please help me on this issue...
Thanks
GTS.

Those are just warnings and shouldn't be an issue.
What browser are you using, have you tried to go directly and through workspace to the application creation wizard.
Cheers
John
http://john-goodwin.blogspot.com/

BI Wizard in 70

Similar Messages

Maybe you are looking for