BI4 server Migration one Data Center to other

Hi All,
We are currenlty Planing to move the BI4 Server along with SQL DB, Can you please let me know if any best practices to move the server Location.
Regards,
Santhosh

Hi Denis,
We have an issue in the below step :
"create new SIA pointing to CMS DB which was moved from old server.
start it."
After we do this and open CMC
we could all the services like CMS, I/p & O/P respositories, Adattive processing server etc pointing to the actual(old) BI4 servers instead of new servers
After this if you login to the any one of the server we can able see all the nodes in new and old servers.
Any idea on what the issue would be ?
Regards,
Santhosh

Similar Messages

What is the best approach to migrate SharePoint farm from one data center to other datacenter

We have two web front server and one application server and two instances for database server and we have to migrate complete farm from one data center to other data center with minimal downtime and end user impact.
Please provide your best input on this.
Thanks in advance.

Create a new farm in the secondary Data Center at the same patch level with the desired configuration. Replicate the databases using the method of choice (Mirroring, AlwaysOn, etc.). Create a downtime window where you can then attach the databases to the
new farm's Web Application(s)/Service Application(s).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Moving production server one data center to other

Hi all,
Actually we have one Production server all the scenarios are working fine, now we want to creat one new server in another data center and replace the old production server(transfer all the scenarios) .what are the roles(for PI Consultant) involved in this case .
Please advise me.
Thanks in advance.

Build a transport in DEV for all your objects and get basis to apply them and activate the changes in PROD. You shouldnt need more than monitoring access in any production system except in error situations.

Is there a way other than redeployment to migrate existing Cloud Services from one data center to another?

We have a need to correct affinity of Cloud Service, Azure DB, Storage and Mobile Services such that they are on a singl datacenter and do not get impacted by network latency when these components communicate with each other. Also to distribute various environments
across different data centers we need to realign some environments to mitigate all environments getting impacted if there is outage.
Existing Cloud Services and related Service Bus queues and topics need to be moved to a different datacenter. Is there a way to do this without having to redeploy cloud services (web and worker roles) or recreate the service bus entities (queues and topics)?
Also, the existing Cloud Service URL need to be retained without with user authentication won't be possible and hence when completed, the new cloud service should have the same URL.
Please provide best available options for achieving this or ask question if more information is needed.

Hi sumeetd,
As far as I know, currently there is no directly way to move services from one data center to another unless redeployment. You could submit a feature suggestion via this page (http://feedback.azure.com/forums/34192--general-feedback
). And at the same time,you could contact with azure support team via the channel below:
http://www.windowsazure.com/en-us/support/contact/
Any questions, please feel free to let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Transfer of Vendor Balance from one profit center to other

Hi All
I need some help regarding Transfer of Vendor Balance from one profit Center to other profit cneter. I am in ECC 6.0 and activated document splitting.
Regards
Venkat

Hi Kamal
You are right. My requirment is to transfer Vendor balance in PC 1000 to PC 2000. If I post using 9KE0 it is not affecting in the respective vendor account. Since we are in ECC 6.0 with document split option we have to post the same transfer entry through any FI transaction only.
Regards
Venkat

Server Requirements - Always On in a single server? - Needs clustering even one server on another Data Center?

Hello:
I have been asking this questions to different forums and got different responses, so I wanted to know if asking to "Microsoft" will give me some good directions. (All in SQL Server 2012, including the OS)
Question 1.- Always On "HAS" to be configured on a WSFC node? How about in a Single SQL Server. (NO Clustering)?.
Question 2.- What about our mirroring processes configured and running in single servers, do we have to have WSFC installed before we can upgrade them to Always On?.
Question 3.- In a case I have WSFC, and configure Always On, can my second or third replica reside in a single SQL Server? (No WSFC). What if I can not have Clustering in a DR Data Center? or I do have only VM's on the DR Center?
Any help will be greatly appreciated.
Thanks
Oscar Campanini

Hi Oscar,
Please find the answers below.
Question 1.- Always On "HAS" to be configured on a WSFC node? How about in a Single SQL Server. (NO Clustering)?.
                - Yes . Each replica must be on a different node of a WSFC cluster. Without WSFC Cluster you cannot create always on as it relies on the failover capabilities of the
cluster.
Question 2.- What about our mirroring processes configured and running in single servers, do we have to have WSFC installed before we can upgrade them to Always On?.
                 - You cannot really upgrade a Database mirroring configuration to Always on , both are different and works differently. Again for Always on each participating
replica must be on a WSFC cluster
Question 3.- In a case I have WSFC, and configure Always On, can my second or third replica reside in a single SQL Server? (No WSFC). What if I can not have Clustering in a DR Data Center? or I do have only VM's on the DR Center?
               - NO all replicas have to be in single nodes of WSFC cluster.
Note: SQL Server doesnt have to be clustered.
Consider the following scenario. YOu need to create Always on with a 3 node topology ie 1 Primary, I secondary and 1 readonly secondary.
YOu need to have all these three nodes a part of Windows Server Failover Cluster. The clustering needs to be done only in the windows level. YOu can install standalone SQL Servers on all these 3 nodes and then condigure them as replica's in ALways on.
Read these links to clear your questions -
http://technet.microsoft.com/en-gb/sqlserver/gg490638.aspx
http://technet.microsoft.com/en-us/library/hh510230(v=SQL.110).aspx
http://technet.microsoft.com/en-us/library/ff878487(v=sql.110).aspx#ServerInstance
Note: When I said Always ON I was reffering to Availability Groups.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Exchange site resilience 2010 (2 MB Server in each Data Center)

Here is Scenrio:
2 MB servers in Primary Data Center (DC)
2 MB Servers in Secondary DC
With one DAG Across Sites, DAG has IP 2 Addresses (One for Each DC Subnets).
Witness server: Primary DC Server
Alternate Witness: Secodary DC Server
Cluster: Node and File Share Majority
DatacenterActivationMode: DAGonly
================================================
Issue:
Last Night Secondary DC Power Goes Down and all System Shutdown.
So I was Not able to access Email even the Primary DC was up and Exchange Server was runnign fine, I Check the Maibox Databases and It has shown the Database "Dismounted" on Primary DC Exchange Server with Activation Pref =1
I check the Cluster and Cluster Was Down.
As FSW was Up and Accessible, and Two Nodes in Primary Site were UP then Why It happend?
Screen Shots are Attached.

Hi Genius1985,
To solve Event ID 7024, please try to install
http://support.microsoft.com/kb/975486 .
More details:
The Cluster services fail on all nodes after you shut down the cluster node that owns the quorum disk resource in Windows Server 2008 SP2
This issue occurs because of a deadlock that causes a timer to expire. This timer terminates the Cluster services.
To solve Event ID 7031, please configure the antivirus program so that it does not scan the MSCS folder on the quorum disk.
More information:
Event ID 1177 — Quorum and Connectivity Needed for Quorum
The Cluster Service May Experience a "MoveFileExW Failed" Error
Event 1135, 7031, or 7036 when the cluster service stops in Windows Server 2012
Thanks
Mavis Huang
TechNet Community Support

Time calculation from one date to some other date

Hello,
I want to time calcualtion from one date to other date period.
for calculating total hr's from one date to other date.plz let me know the logic.
                       Date                      Time
Eq: 1st date:   22.05.2008             01.10.00
      2nd date:   25.05.2008             12.10.00
I want the total hrs from 22.05 to 25.05 like i need result as
from 22 to 25 total hrs based on the time given.

Hello,
Instead of FM..We can achieve by the following program...
REPORT YRT_TEST1.
parameters : date1 like sy-datum,
date2 like sy-datum.
data: days(3) type n.
data: years(10) type p decimals 3.
start-of-selection.
days = date2 - date1.
years = days / 365.
write: / days,
years.
Now Multiply 24 to days to get hours and the multiply with 60*60 to get the seconds
***************Reward points,if found useful

HT5390 have a Mac mini server in the data center no physical access. Is it possible to configure a remote "console" that allows shutdown and reboot remotely ?

A mini mac used for building sits in the data center normally we access via VNC network connection.
I want to have "console" access to shutdown and reboot system.
Reason. Updated to Mountain Lion OS X from 10.7.x and lost VNC connections, now host is down with no physical access.
Alternate is to call data center and see if someone can cycls the power ?

As mentioned by Linc there is no 'lights out' management for the Mac mini (or any current Mac). If the Mac is still running you can initiate a reboot via the GUI or commandline. If however it is completely crashed then there is a solution you could consider which is to get a managed power distribution strip. With this the power strip has its own network connection and lets you remotely turn off (and on) individual power sockets. This would then let you 'hard reboot' the Mac mini even if crashed.
See http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=ap7921& tab=features

On new MacPro with Microsoft Office, two email accounts (same server) yet one is fine the other dumps 35,000 emails into inbox. Apple consultants no help. How do I get the 35000 email account fixed?

On new MacPro with Microsoft Office. Two email accounts, same service provider and server, yet one email account is fine and the other dumped the entire server of 35,000 emails into inbox. Need to keep server load for business, but how can emulating server on one account be fixed?

You should clean up your inbox on the server. Log into the account's web interface and move the 35,000 emails out of the inbox into another folder. Why do you need to keep 35,000 emails in the inbox? An email client like OutLook etc. using POP protocol downloads all the inbox emails to your computer.

How to use value from one data set in other data set SQL select.

Hello all, i have one data set, and i need to get value from that data set into other data set. Something like '?' but without input. I will try to explain it with screenshots:

If both tables come from the same data source, join the two tables in one data set rather than two as shown. If they are from different data sources, use a 'join data set'

Reasons To Encrypt Server Disks In Locked Server Room or Data Center?

Our servers' local disks contain mostly just the OS and minimal software. Actual data is usually on a SAN.
Is it necessary, recommended or even feasible to install full disk encryption on local disks of Windows Server 2008R2 and 2012R2 servers?
What about encryption on disks running from a SAN?

Hi,
Is it necessary, recommended or even feasible to install full disk encryption on local disks of Windows Server 2008R2 and 2012R2 servers?
Encrypted Hard Drives are a new class of hard drives that are self-encrypting at a hardware level and allow for full disk hardware encryption. Windows 8 and Windows Server 2012 support installing to these devices without additional modification.
As for if it is necessary, depends on the importance and confidential level of the data stored.
What about encryption on disks running from a SAN?
You may need to consult with corresponding vendor support to get feasible solution.
More information for you:
Encrypted Hard Drive
https://technet.microsoft.com/en-us/library/hh831627.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

IPT Clusters Data Center Move 8.6(2a)SU3‏

Hi Voice Experts,
Any help will be appreciated, I have read Cisco BCP and understand the best practice but Cisco doesn’t talk clearly about the questions mentioned [only adding subscriber needs a cluster reboot is confirmed but wanted to know from the experience of experts here]:-
We have a plan to move data center for IPT Clusters, and we are working for POC for server build as of now, I would need your guidance for the following questions:-
1-      Adding a new Subscriber:
a.       Is rebooting for all nodes in a cluster required?
b.      Is this mandatory to remove the subscriber from the list of servers from publisher before building the same subscriber in a live environment? [lets say need to replace MCS server for a subscriber]
c.       Can the replica subscriber be built in an isolated environment first by building the replica Publisher and then Subscriber, and later promote this newly build subscriber in live environment by replacing this with the original non working subscriber?
2-      Node licensing:
a.       The node licensing reflects the no of Subscribers in a cluster [not non subscribers like MOH, TFTP servers], lets say we have one subscriber in one data center, we need to move this in another Second data center, so can we build this server with different ip address in live running environment [will shut down the original subscriber first before promoting newly built server as SUBSCRIBER considering node licensing limitations], is that doable ? OR First we need to decommission the current running server from one Data Center and then start building the subscriber in second data center?
Regards,
Shah

I dont quite follow what you are trying to do, are you actually going to move your whole cluster to a DC?
if you move DC, can you move your VMs across and Re-IP?
if you are going to build new subs in the new DC, you will need to add these to your existing cluster yes, no full reboot of your cluster should be required when adding a sub. once you have all subs spun up in your new DC, move your phones across to it (change option 150 in each voice subnet). lastly Re-IP your PUB to fit in the new IP range in your new DC
always make sure you ready the release notes!!!!!
You will need to get temporary licences for your interim period where you have a bunch of sub in the new as well as the old DC. All you need is node licences. Speak to your reseller.
please rate if usefull

Where to buy Windows Server data Center (BOX) (Retail)

Hey Everyone ,
Can somebody please point me to the right direction of buying windows server 2012 R2 Data Center edition in a box ?
I want the retail one .. the OEM's are everywhere like in amazon or HP or ..
but I think the OEM is not suitable for me because I have a variety of hard wares like IBM , Cisco and HP so OEM is out of the question .
I searched everywhere but there is no retail version at sight .
Oh I find the Standard edition on Microsoft Store . but there where no data Center .
If anyone have any document that says there's no retail version of DC edition it would be very much appreciated as well .
thanks again .
Good Day .

You can't buy the datacenter edition as retail.
Check the licensing datasheet:
http://download.microsoft.com/download/F/3/9/F39124F7-0177-463C-8A08-582463F96C9D/Windows_Server_2012_R2_Licensing_Datasheet.pdf

BI4 server Migration one Data Center to other

Similar Messages

Maybe you are looking for