BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Similar Messages

Error while activating the Data in DSO

Hello,
We moved huge amount of FI data from datasource to DSO. After moving all the data, we tried to activate the data. But the mistake we did is we activated all the requests at one go. (my assumption) It turned all the request to Red. The job log says SQL error.
Is there any way of solving this issue without deleting the data. Data load will take too much time and we would like to avoid it if possible.
Waiting for inputs!!!
Regards,
Abhishek

yes a Dump was triggered.
Database error text........: "ORA-12801: error signaled in parallel query
server P007#ORA-01652: unable to extend temp segment by 2560 in tablespace
PSAPTEMP"
Internal call code.........: "[RSQL/FTCH//BIC/AYEPSPFI140 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
"ACTIVATE_DATA_FROM_QUEUE"
Edited by: Abhishek Nishis on Oct 12, 2009 10:54 PM

Error while activating the data into DSO

Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
Annie

Hi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani....

Error coming while activating the data request at DSO level

Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet Rana

Hi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Error While Activating the CO-PA DSO

Hi Friends
As i am new to CO-PA . I am facing problems while activating DSO.
Error : Short dump has not been completely stored (too big)
What happened?
Error in the ABAP Application Program
The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Error analysis :
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
Please Suggest me
Thanks
Gowtham

Hi Fathima
Here is the screen description
Short text
    Type conflict with ASSIGN in program "GPDI1O4GBC7CYZNYW1LK35LKP6J".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
     because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
Trigger Location of Runtime Error
    Program                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
    Include                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
    Row                                     886
    Module type                             (METHOD)
    Module Name                             EXECUTE
Thanks
Gowtham

Error - While activation of Data in DSO

Hi Experts,
I'm facing following error message when tried to activate the data in DSO - The data went through fine in PSA and when triggered DTP to load data in DSO; the monitor showed green but when activated in DSO it's giving following error message. I transfered the global settings but facing the same following error message:
Diagnosis
     An exception wrong_date was raised while executing function module
     RST_TOBJ_TO_DERIVED_TOBJ .
System Response
     Processing the corresponding record has been terminated.
Procedure
     To analyze the cause, set a break point in the program of the
     transformation at the call point of function module
     RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
     investigate the cause.
Procedure for System Administration
Any idea that why it's generating this error message while activating data in DSO. I checked those records in error stack and seems to be a date issue but I checked the factory calendar and check the validity and that's fine and is within the factory calendar data range.
Thanks in advance - you response will be really appreciated.

hi,
as you said the global settings were done,
try the global settings once again then delete the PSA(if records were less) nd load from source and then load to target.
this may solve if all settings were fine.
if records were huge in PSA, try correcting the records in error stack after allowing the good records to the target.
Ramesh

Error while loading the data in DSO (Bi 7.0)

Hi Friends,
I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because earlier request is yet to be activated.
now I tried to delete the earlier request .Neither its getting deleted nor am I able to change the QM Light to Green .
What should I do to activate the Successful request to load the data in DSO.
puzzeled !
Anurag

Hi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay.

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Can anyone pls. help me : facing problem while fetching the data from BAPI

Hi all,
    we have installed xMII in a new server. In this new server I am trying to fetch data from a BAPI & write it into a file thru a transaction, but i cant see the data in the tracer, & neither is the file created. But with the same configuration & connection am able to get the data in the old server. Can anyone pls. tell me wat could be the problem?? or is there anything else that we might have forgotten while installing xMII in the new server.
ur help would be greatly appreciated.
Thanks,
Sushma.

Hi Ravi,
       no am not able to see the table structure also. This is what it is showing in the tracer :
   [INFO ]: Execution Started At: 17:24:17
[DEBUG]: 00000.03100 Begin Transaction 'TMP99A51958-5BAE-CDE0-0DB5-A3A8C72BC297'
[DEBUG]: 00000.03100 Begin Sequence Sequence : ()
[DEBUG]: 00000.03100 Begin Action SAPJCOInterface_0 : (SAP JCO Interface)
[DEBUG]: 00006.43700 Connection Took 6406 mS
[DEBUG]: 00009.82800 Function Creation Took 3391 mS
[DEBUG]: 00010.25000 Execution Took 422 mS
[DEBUG]: 00010.25000 End Action SAPJCOInterface_0 : (SAP JCO Interface)
[DEBUG]: 00010.25000 Begin Sequence Sequence_0 : ()
[DEBUG]: 00010.25000 Begin Action Repeater_0 : (Repeater)
[DEBUG]: 00010.26600 End Action Repeater_0 : (Repeater)
[DEBUG]: 00010.26600 End Sequence Sequence_0 : ()
[DEBUG]: 00010.26600 End Sequence Sequence : ()
[DEBUG]: 00010.26600 End Transaction 'TMP99A51958-5BAE-CDE0-0DB5-A3A8C72BC297'
[INFO ]: Execution Completed At: 17:24:28 Elapsed Time was 10235 mS
I doubt the repeater is not working, becoz i checked the JCO connection & thats fine..
Thanks,
Sushma.

BI7.0 Hexdecimal values problem while activating the data in DSO

Similar Messages

Maybe you are looking for