BI7.0(Stack 11)-3.X Analyzer- Is there any limit for Free Characteristic?

Hi All,
We are on BI 7.0 Stack 10. . The same happens in Stack 11 too.
Problem : Looks like when a query with 101 or more free characteristic is executed in 3.X Bex Analyzer, the swapping of the characteristic will bring different characteristics. Even the Add drilldown also does the same.
NOTE: I just have a single key figure in columns and a single characteristic in row.
For Eg: If I swap country with city, then instead of city it might bring employee.
This does not happen if the free characteristic is = 100. if it is greater than 100 then it does a bad swapping or drilldown.
NOTE: I did not see this problem in the 3.X web runtime.
As per sap's help there is no limit for free charcteristic. Please see the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
Please let me know if anybody else came across this problem or any OSS note available on this.
Thankyou,
-Sini

Photoshop > Preferences > Interface > Show Transformation Values

Similar Messages

Is there any Example for N9010A EXA Signal Analyzer

Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.

AnkitG wrote:
Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

Supress warning message in Query Analyzer after free characteristic removed

Hi
I have a query and several workbooks looking to the same query.
When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
Is there any way to supress these warning messages? I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company. Is there a way I can supress the warning from the query?
We are running 3.x for this particular query and report.
Thanks

Hi,
In RSRT, you have an option for the suppressing the messages.
Have a look on the below link -
http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
Regards,
Geeta

Is there any tool to analyze explain plan and gives the report

Hi All,
Is there any tool/scripts to analyze explain plan from plan_table and gives the output report
Thanks,
Sankar

Hi Jaffar,
Thank you!!!
The below query will generate the execution tree:
SELECT OPERATION,
     OPTIONS OPTIONS,
DECODE(TO_CHAR(ID),'0','---',OBJECT_NAME) OBJECT_NAME,
     (ID ||'-'|| NVL(PARENT_ID,0) ||'-'|| NVL(POSITION,0) ) "ID**PARENT_ID**EXECUTION_STEP",
     SUBSTR(OPTIMIZER,1,8) OPT
FROM PLAN_TABLE
START WITH ID = 0
AND STATEMENT_ID = 'Q1'
CONNECT BY PRIOR ID = PARENT_ID
AND STATEMENT_ID = 'Q1'
Thanks,
Sankar

Desired stack size of 8197 Kb exceeds current process limit of 8192 Kb.

I've installed HP's JDK on my hp box:
HP-UX HPUX B.11.23 U ia64
However, I noticed that when I got some error just type "javac":
# java -version
java version "1.5.0.06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.06-_12_jan_2007_03_27)
Java HotSpot(TM) Server VM (build 1.5.0.06 jinteg:01.12.07-08:49 IA64, mixed mode)
# javac
Java HotSpot(TM) Server VM warning: Desired stack size of 8197 Kb exceeds current process limit of 8192 Kb.
Well, I could compile and execute java programs on this box, but I'm curious to know the cause for the error message.
Thanks,
Tuan

What is your ulimit set to ?
e.g.
$ ulimit -a
stack(kbytes) 8192
Check your kernel limit with :
e.g.
# kctune | grep maxssiz
maxssize 8388608
maxssize_64 268435456
So you could boost it by changing the maxssize kernel parameter.
Hope this helps,
Lee

FWSM - Is there any script to analyze syslog and/or optimize rules?

Hi,
is there any program/script that optimize FWSM rules?
For example:
- check all the objects that are not being used
- check rules that have no use or impact (can be remove because there is another permit rule that is already doing the job)
- etc...
Is there any program/script that analyzes FWSM syslog information and generates reports about all the traffic that has been denied or allowed? For example:
- To many DNS check that comes from a specific host
- To many ping denial from a specific source (ddos)
- etc...
Thanks,

This will give you % free per tablespace
SELECT files.tablespace_name Tablespace,round(files.sze/1024/1024) "Size",
round(free.free/1024/1024) "Free", round((free.free/files.sze) * 100) "Pct Free"
FROM
(SELECT tablespace_name, sum(bytes) sze FROM dba_data_files
GROUP BY tablespace_name) files,
(SELECT tablespace_name,sum(bytes) free FROM dba_free_space
GROUP BY tablespace_name) free
WHERE files.tablespace_name=free.tablespace_name

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Analyze ALL clips in project for image stabilization

In older versions of iMovie for Mac (I used iMovie '09 until I finally get myself to switch to the recent version) I was able to analyze ALL clips for image stabilization, which took some time but could be accomplished without me sitting in front of my Mac. Now it seems that in iMovie 10 the stabilization feature only works for the selected clip. That means you select it, click the stabilization checkbox and wait and wait and wait. Then you get to make the right setting (percentage) and move on to the next clip, click the checkbox and wait and wait and wait.
I tried selecting all clips with Cmd + A and click the checkbox, and the wheel started to spin. I was already feeling lucky to have found the solution to the afore mentioned problem, but when the wheel stops spinning and I select a random clip, some of them are analyzed but most are not.
Is there any way to have ALL clips analyzed without user interaction?

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

Is there any way to get at photos buried in collapsed collection stacks?

Is there any way to get at photos buried in collapsed collection stacks? (without resorting to keyboard stuffing I mean)

OK. Kludgy, potential optimisation for that suggestion:
1) Find the top photo for each stack in that collection
2) catalog:getAllPhotos() as per John's suggestion
3) catalog:batchGetRawMetadata for the photos (in batches of ?) gathering uuid, and the collection equivalent of stackPositionInFolder and topOfStackInFolderContainingPhoto
4) check for intersections between the photos found in step 1) and the top of stack photos identified in 3)
Don't have LR 5 SDK at hand so I'm assuming there are collection equivalents of the metadata available re folder stacks, and that the batch get metadata call will be quicker than calling a method on every folder in your catalog.
Stack handling in these SDK functions is, shall we say, sub-optimal.
Matt

Is there any way to "stack," or arrange/organize my contacts on my iPhone by 'date they were added'?

Is there any way to "stack," or arrange/organize my contacts on my iPhone by 'date they were added'?

Put them in a new group.

BI7 dual stack upgrade using 'resource minimised' method

Hi
I am upgrading a Windows 2003/MS SQL 2005 sandpit NW04 BI 350 dual stack (ABAPJAVA) to BI7 (NW04S ABAPJAVA) as a test before working on our actual landscape, I have started the ABAP upgrade and chose the 'resource minimised' method as downtime isn't an issue on the sandpit, I then started the upgrade on the Java stack, but then noticed in the documentation it states you should use 'downtime minimised' for a dual stack upgrade? the ABAP prepare recognised I had a dual stack and said it would be synchronised but never complained about the resource minimised choice ? the phases have been waiting for synchronisation so far without a problem.
Is this a problem? I can reset the upgrade, but its quite far through, so would rather not !
Thanks,
Paul.

Hello Paul
As you said, SAP state that you must perform a dual stack upgrade using strategy downtime - minimised. I had a problem when I used resource minimised but if your upgrade is running then donu2019t terminate it. If it works, thatu2019s great.
What I normally do is run strategy downtime minimised with an import time of zero hours.
Thank You
Anwar

Stacked Column Report bug when one series has zero for data

Hi,
I'm encountering an issue with the stacked charts. In my chart, I want to show the total of active and expired records for each year. I created a series for each, and the SQL for them is below:
Active (1st series created):
select '' link,to_char(preparedate,'YYYY') label,count(*) Active
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 0
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
Expired (2nd series):
select '' link,to_char(preparedate,'YYYY') label,count(*) Expired
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 1
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
When I see the chart output, I expect the chart to show the stacked columns with expired stacked on top of active, and ordered by year. However, for the two years in our database where there are no active (series 1) records, only expired (series 2) ones, these bars are displayed to the right of the other years. Oddly, for the year where all records are active, and none are expired, there is a sliver at the top of the bar for that year showing as the color for expired, and hovering over that portion of the bar displays zero. I understand that with the other two years where the series with zero would be stacked on the bottom, and therefore not visible, but why does the chart put these years after the other ones that are in order? Since my records are from 1998-2007, and the two years without series 1 records (active) are 1999 and 2002, the years are shown in this order: 1998, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 1999, 2002.
Any help with how to make these two years show in the correct order with the others is appreciated.
Thanks,
Brian

After switching from Thin driver to OCI the problem went away.

Stacked bar chart showing zeros when there is no data

Hi,
I am developing a stacked bar chart which plots month vs sales of 3 different products.
I am showing data points and the total sales on chart. Every thing looks good except the zeros displayed on the chart if there are no sales for a product for a particular month... how to get rid of these zeros ? i mean how to display the value only if there is some data ?
Thanks

Sounds like you have a left outer join from your product table to the sales data. Thus product is listed even when no data present.
Try changing join to Equal
Ian

BEx Analyzer: Use Of Variable Values For Planning Sequence

Hi experts,
I want to start a planning sequence using a button item in a BEx Analyzer workbook. The planning sequence itself is defined with several variables, that are input ready. The same variables are used in BEx Queries that are bound to DataProviders in the workbook. Therefore the variables are filled by the user, if the workbook has been started. If the user wants to start the planning sequence, that is defined on the button item, the same variable values (which the user has already set in the beginning) should be used. But I didn't find a way to fill planning sequence variable from variables (like it is possible in the web interface using the DataBinding function). It seems, that it is only possible to set the variable with static values, that are defined in the button item. Am I erring in this point?
Anyone here who can help me regarding this issue?

Eitan Ohayon wrote:
Why did you raise this question?,did you face any problem?
Hi Eitan,
The problem was, that the planning sequence worked fine in web but not in analyzer. The system told me in web, that several records had been read, created, changed and deleted. System messages in BEx Analyzer always indicated zero reads, creations, reads and deletions.
Using your idea to set breakpoint in the INIT_EXECUTION method gave me the information, that all variables are not set or set with initial values (like '0000' for fiscal year). This seems to be the reason for my problem. Now I've reduced the planning sequence definition on the button only to that variables, that are really needed. Furthermore I defined the Command Range to get dynamic values for the variables from the excel sheet grid. So it seems to work.
Thank you for your help!

Call stack limitation (recursive limit) for Flash Lite

What is the call stack limitation for Flash Lite?

Thanks for the input
I thought I had it figured out, but I still see an occasional crash. I put my save to flash function in a vi of its own and it runs fine. I use the standard "write to binary file.vi" The problem seems to be when other loops are running in parallel. If my diagram has any timed loop structures, then it crashes. So I removed all of my timed loops and slowed down/simplified all of the other loops. This helped a lot. While it used to crash about every 5th time now it will run about 50 on average but still crashes about once a day. I am rewriting my vis to run sequentially in a single loop so that they arbitrate with each other manually (so much for real-time) I will see if that works, but in the meantime..
I can try the upgrade to 3.3.0 if you think that will help, but do I also have to upgrade anything else in my design environment (ie can I leave the rest of labview alone and just update the cRIO)? If the upgrade has trouble I need to be able to revert back to where I am now. I can't afford to begin a large upgrade which will take me down for a while. I had a lot of trouble installing all of the Labview environment the first time, so I don't want to start something that I will regret.
Nathan

BI7.0(Stack 11)-3.X Analyzer- Is there any limit for Free Characteristic?

Similar Messages

Maybe you are looking for