BI7 Admin Cockpit Data Collection Issue

Hi,
We are in BI7 SP15.
When I run my Z query & run Query Runtime Statistics - Delta process chain i don't see any statistics data in 0TCT_C02. I activated all required objects. But if i run query in 0TCT_MC02 & run delta load i see the records in 0TCT_C02.
I verified 'Tools - BW Statistics for Infoproviders' both 0TCT_C02 and my Zcube (also both quries) has same setting. Am i missing any steps?
Thanks
Ramesh

Thanks for the reply.
After running the delta process chain i can see only the stat data for query from 0TCT_MC21 not for my Zcube. I ran query against my Zcube but i could not see any stat records related to my Zcube queries.
I set RSA1 - Tools - Statistics for InfoProviders for my Zcube to X & 2.
Any help is appreciated.
Thanks
Ramesh

Similar Messages

  • Performance Report Manager Data Collection Issues

    I have an agent running and collecting data in a circular file.... history.log
    Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
    If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
    If you can provide any information as to what to look for, please reply.

    history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
    If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
    Regards,
    Mike
    [email protected]

  • LMS 4.2 Topology Data Collection Issue

    Hi there,
    i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
    Topology Data Collection    193    0    Not Available     Running    Schedule
    Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
    Thanks for help.

    Hi,
    i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
    Everything is set to 0:
    Topology Data Collection      0 0 Not Available                          Running Schedule
    UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
    VRF Collection                    0 0                                              Not Available Idle Schedule
    But Topology Data Collection is still frozen to "Running" state....

  • LMS 3.2 Data Collection Issue

    Hi ,
    I have LMS 3.2 and license for adding 5000 devices , my data collection is running continously for the past 2 days, when i try to stop the daemon manager and restart it comes to idle state but after some time it again goes to Running state
    I am not getting the best practices deviations and discrepaqncies report after this issue
    I am attaching the ANIServer.properties , ani.log and ANIServer.log file
    Please help

    this seems to be BugID CSCtd49439:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtd49439
    also consider to install the patch for BugID CSCtg20882:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtg20882
    if you have CM 5.2 you should consider to upgrade to CM 5.2.1 which is available here:
    http://www.cisco.com/cisco/software/type.html?mdfid=282641773&flowid=5141&softwareid=280775108
    the patches for BugIDs CSCtd49439 and CSCtg20882 are availabel by contacting TAC

  • BI7 Admin Cockpit

    Hi,
    I am trying to setup the BI Admin Cockpit in BI7. Following the steps in the document (BI Administration Cockpit and
    New BI Statistics Content in SAP NetWeaver 7.0), I am stucked in the following steps:
    1) to configure and connect BI system and Portal
    2) Activate Business Package u2018BI Administration 1.0u2019
    Does anyone has experienced on this? Exactly how/what I should do it in the above 2 steps?
    Also, I have the following questions:
    a) where can we call/execute the Admin Cockpit? Must it be executed via the Portal? Or is there any transaction we can call the Admin Cockpit?
    b) How do we know if Admin Cockpit has been configured in the system?
    Please advise, thank you.

    Hi,
    Check thie belwo thread you will get good info :
    BI Admin Cockpit
    Re: Installing BI Administration Cockpit

  • BCS - Data collection issue

    Hi,
    I'm using BCS 4.0. I'm working now in final testing and I have some question regarding to the data collection process using load from data stream method. I ran the task in consolidation monitor for 007.2007 period and for all companies without any error or warnings, but we have differences in financial information for that period.
    I reviewed the content in my BCS cube (RSA1) and we don't have any data for that accounts, the only thing that I found was that all docs were created on same date
    I deleted the ID request in RSA1in my BCS cube and I executed task again in consolidation monitor, but the result was the same.
    Looking at log / source data, in the rows listed, these data is not taking from the infoprovider
    Any idea which could be the problem ?
    Thanks
    Nayeli

    Hi Nayeli,
    I had to do this kind of job (reconciliation of data in the source basis cube and the totals cube) during the final testing a lot of times, with an accountant.
    The only way to have the first clue what is happening is to compare every particular amount s in both cubes. Comparing and trying to figure out any dependencies in data.
    The difference might arise because of ANY reason. Only you may analyze the data and decide what to do.
    AFAIU, you compared only reported data and did no currency translation and eliminations?
    Then, I'm afraid that you've made a very big mistake deleting the request from the totals cube. You have broken the consistency between totals and document data. For a transactional cube the request is yellow until the number of records in it reach 50000 records. Then it is closed and become green. As you may understand, in those 50000 records maybe contained a lot of data for different posting periods, for example, reported data for the previous closed period. Though, documents still contain eliminations for that period. - Inconsistency.

  • Interactive PDF created in CS6 InDesign data collection issue

    Created an interactive form from within CS6 InDesign. Uses text fields and check boxes with a submit button to forward the completed form to an email address. When tested in Acrobat Reader, the collected information will not be submitted, just a copy of the form -- blank. Any obvious solutions to this, perhaps a step I missed when creating in InDesign?
    Also, my submit button creates an email to send with form completed data input, and attachements too, can then be included. Is there a way to bypass the attachements step for the email and simply have an Include (browse) for attachements while within the interactive PDF?

    Which version of Adobe Reader are you using for testing purposes? Adobe Reader XI introduced the ability to save filled out PDF forms and submit them. For earlier versions as far as I'm aware you'd need to create a Reader Extended PDF, which is something you can do in Acrobat, not InDesign.
    If you have Adobe Acrobat:
    Open the PDF form you created in InDesign then
    File > Save as Other > Reader Extended PDF > Enable More Tools... and test it in Adobe Reader again.
    To answer your second question, not that I know... (neither in InDesign or Acrobat).
    However, if you have a copy of Adobe LivecycleDesigner, you can add a form object that can be used by users to include attachments.
    Cari

  • Performance data collection issue

    Hi,
    We are using SCOM 2007 r2.We have some servers not collecting performance data.These servers are up and running fine and generating alerts (Monitoring Working fine). Can any one please suggest us what is the work arround for this.
    Thanks&Regards,
    Padmaja M.

    Try to clear management server health service cache by stopping the system center management service, renaming the health service state folder and starting the service.
    Juke Chou
    TechNet Community Support

  • Data collection failing

    LMS 4.1 W2k8 R2
    I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1.  What I have found is that data collection is failing for all but the top switch in the stack.  In other workds, in some cabinets I may have 4 switches connected back to a 6500 core.  Data collection succeeds for only the switch connected to the core.  UT info is not collected for the switches that fail data collection.
    If I go to the device status dashboard I see that I have data collection succeeding for 56 devices and failing for 96 devices.  For the devices that fail some are listed as unreachable and others as never-reachable.  In either case, the following is suggested as a resolution:
    Verify the following :
    1. Device is reachable using ping.
    2. Verify that DCR is configured with correct credentials for the device.
    These devices are reachable.  Inventory collection is succeeding.  If I test reachability in device center I get successes across the board - even for SSH, though no username is specified in DCR so I can't see how that works.
    The 17 stacks I just installed are configured as clusters in those cabinets that have more than 1 switch.  However, they are not managed as clusters by LMS.  They all have IP addresses.  I just use clustering to facilitate bouncing around a stack from a telnet command line.
    I deleted one of these switches and re-added.  Now ping, HTTP, SSHv1 & v2 succeed in device center - but everything else fails.  When I run a credential verification job on this switch it reports SNMP read and write success, telnet & enable success, and SSH "no value to test".  The credential verification results are as I would expect.
    I am at a loss at this point.  How do I troubleshoot the data collection issue?
    -Jeff

    I found the answer to my particular problem here:
    Campus Manager and cluster-member switches

  • Data Collection

    Hi Experts,
    I am facing issue in Data collection Error in Decentralized environment.
    Earlier Data collection (Standard collection) was working normal but recently I am facing the below issue.
    If I launch Standard collection, it is getting Error out. Log file message (in Data pull Program) is Staging Tables' data is not collected. Please submit the request Planning ODS Load.
    For resolving the above, I tried the below two methods.
    1. 1st launch Planning data collection - purging staging tables then Launching Standard collection, but it is also fails with error in the program "APS Collections Miscellaneous Task". Error message : FDPSTP failed due to ORA-06512: at "APPS.MSC_UTIL", line 1192.
    2. launch Planning data collection - purging staging table, Data pull (manual launch) then Planning ODS load (manual launch). Same error message
    But, I am getting negative result.
    Hence, what is the missing setup. Is this need any profile option. or How to solve this.
    Appreciating your earlier answer.
    Regards,
    Ramesh

    Hi
    Package is Valid (I used the said query "select object_name, object_type, status from all_objects where object_name = 'MSC_UTIL'")
    Data collection issue is not resolving. Below are my tryings
    Try 1:
    1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
    2. I launched Standard Collection (as standard way)
    Result:
    Planning ODS Load getting Error out, log file showing below error
    Exceptions posted by this request
    Concurrent Request for "Planning ODS Load" has completed with Error.
    Try 2:
    1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
    2. I launched "Planning Data Pull" manually (Completed Normal) then
    3. I launched "Planning ODS Load" manually
    Result:
    Planning ODS Load Error out because of below
    I am getting below error message in the concurrent program "Generate Trading Partner Keys" log file.
    **Starts**27-FEB-2011 16:20:16
    ORACLE error 6512 in FDPSTP
    Cause: FDPSTP failed due to ORA-06512: at "APPS.MSC_CL_SETUP_ODS_LOAD", line 5094
    ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6862
    ORA-06512: at line 1
    Appreciating your earlier reply
    Regards,
    Ramesh
    .

  • Problems with Data collection in CM 5.0.6

    Hello:
    I have installed LMS 3.0.1 and CM 5.0.6, and I have some problems with CM:
    -Although data collection is scheduled, this does not run.
    I try to launch it from CM menu, it asks if I want the collection of all devices or the new ones.
    I try the two options but it does not do anything.
    -I can launch the UT acquisition but it does not collect all the hosts.
    I compare the configuration of the devices that "works" and the others and dont see no difference.
    -The UT acquisition does not discover our Ip phones.
    -In data collection settings there are 5 devices that are included but not managed.
    -When I restart the server the data collection works fine, but the next day it doesn't work.
    Thanks!!!

    Hi,
    As suspected, Campus Manager 5.0.6 hitting a bug as found the following exception in ani.log :-
    2011/03/14 15:05:40 Discovery ani ERROR AniTimeLine: TimeBase Discovery caught exception: java.lang.NullPointerException
    java.lang.NullPointerException
        at com.objectspace.jgl.HashMap.put(HashMap.java)
        at com.cisco.nm.ani.server.core.PortDetailsXml.populatePortData(PortDetailsXml.java:109)
        at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.generatePortDetailsXml(DiscoveryTimeBaseImpl.java:104)
        at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.postPerformScheduledFunction(DiscoveryTimeBaseImpl.java:81)
        at com.cisco.nm.ani.server.frontend.AniTimeBaseImpl.execute(AniTimeBaseImpl.java:48)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.executeTimeBase(AniTimeLine.java:317)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.runSchedule(AniTimeLine.java:350)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.run(AniTimeLine.java:366)
        at java.lang.Thread.run(Thread.java:595)
    BUG ID = CSCtd49439
    link to view bug at Cisco.com
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd49439
    You need to contact TAC for the patch.Kindly click on Action --> open Service Request and it will put all these notes and logs of this thread to the TAC case.
    Once the data collection issue will be fixed and the correct number of devices being data collected properly, then you need to make sure to add "Call Manager" to Common Services with the community string credentials and run the data collection and UT Acquisitions to get the IP Phones discovered.
    Thanks,
    Gaganjeet

  • BI Admin Cockpit - no application data

    Hi All,
    We are having issues in seeing data in BI Admin cockpit which is avaialble in our EP7 system. We have integrated this EP7 with a BI system.
    We have successfully completed the run for DATA LOAD and Runtime Query Statistics - Init and Delta in the BI system.
    Also the SSO and everything is fine.
    We are able to see the BI admin cockpit pages for Data load status - process status, bi object request status, infoprovider request status. All have values in the form of tables.
    But we are unable to see any data for Query runtime statistics, Data load statistics and Bi usage statistics.
    All show "No application Data found."
    Our BI is a sandbox system and it is not used very actively.
    Also we see the follwoing texts in the BI Admin cockpit iviews.
    Characteristic 0TCAKYFNM does not exist. Check authorizations
    Please let me know how we can get the data visible and also remvoe this Authorizaiton check.
    REgards,
    Raghavan

    Hi All,
    Thank you very much for your valuable inputs.
    SAP Replied to my query.
    Issue was that the RSTSC_ADMIN shows that the installation was still Activating.
    I reinstalled the content manually and now the process chains had run.
    We are able to see the Charts.
    PS: The Activation failed with error because of JCO Commn. failure with JAVA. Still this is ok because if the objects are activate in RSOR you can consider the activation a success.
    Thanks and Regards,
    Raghavan

  • BI Admin Cockpit - Iview not displaying data

    Hi
    we recently installed BI admin cockpit and found out that the data is not showing in Iview different windows.
    System admin -> Monitoring -> Business Intelligence ->  Data load Status -> Infopackage statistics.
    I could see 4 Iview windows but no display of information but If I click options and open in new window , I could see the statistics displayed.
    How do I make the statistics displayed in the default window
    thanks
    Edited by: Bhat Vaidya on Aug 14, 2008 11:49 AM

    Hi,
    I applied SAP Note 972514 Empty BEx Web analyzer instead of BEx .
    try it and let me know.
    thanks

  • Automatic data collection evaluation issue

    We are currently evaluating several automatic data collection applications that we are planning to integrate with our Oracle Applications --- got most of the RFQ constructed using this template, http://www.highjumpsoftware.com/adc/Vertexera062503/
    but we want to make sure that all the system integration issues have been accounted for.
    Does anyone have any success stories/horror stories about integrating automatic data collection products with the ERP system
    Thank you!

    cfhttp is a good place to start.

  • BI Admin Cockpit process chains fail to install

    Hi All,
    I'm attempting to install and configure the BI Admin Cockpit on our BI Development system.
    I've followed the steps outlined in the collective note, 965386.
    When running transaction rstcc_inst_biac to install the Content for the BI Admin Cockpit, the background job RSTCC_ACTIVATE_ADMIN_COCKPIT cancelled with error message RS 062.
    Regarding this, instructions from note 1039381 were used to clear table entries and I re-ran the job, this time successfully.
    Checking slg1, the logs show no errors and only minor warnings and it can be seen via RSA1 that some Technical Content is in the Activated state.
    However, when entering transaction RSPC to schedule the process chains, the screen is blank and it appears that the associated chains have not been installed.
    Regarding this, note 1065249 has been checked:
    <i>'This note needs to be applied only if SP level of software component BI_CONT is less than SP7 and SAP_BW is greater than or equal to SP13.'</i>
    Our system is currently at the required SP levels, BW13 and BI_CONT SP7.
    Any ideas on how to install the process chains would be very welcome.
    Chris

    I was able to install BI Admin Cockpit recently after multiple attempts. All process chains installed properly. There are still some minor issues but in general I was able to see the BI Stats reports. Here is the steps that I did:
    System Info: SAP_BW     700     13, BI_CONT     703     5
    1. Note 934848: Select only myself system in the TX:RSOR Source System
    2. Note 834280: Installing technical BI Content after upgrade
    3. Apply OSS note: 1039381, 1065249, 1044792
    4. Note 965386: Activate tech content in IMG (SPRO) sequentially from Activate SAPI Data Sources ... to Activate Technical Content. Activating it sequentially will help identify which step is failing.
    5. Activate Process Chains using txn RSOR Technical Content (0TCT*).
    The process chains were installed but failed to be activated. Whe I double click on a process chain nothing was displayed but edit the process chain anyway and activate manually.
    Good luck.
    Tony

Maybe you are looking for

  • How do I change who Notes are "from" in Mail?

    It still lists my new notes as being from the previous owner. I'm new to Macs, so please humor me.

  • Statspack repot interpretation

    Dear all, I have a customer who is using 9i and I am studying the performance issue from the statspack report. There are several points I would like to ask for your help: 1. There are two events (CPU time; db file sequential read) usually shown in th

  • Users receive "Incomplete Logon Data" error when refreshing SSO BW Unv's

    I am receiving an 'Incomplete Logon Data' error for users who try to refresh reports using SSO based universe data connections to BW. The users login to Infoview with WinAD (SSO through Vintella). Their BW alias is already mapped in through the autom

  • MSI 975x PowerUp Edition and Intel Core 2 Duo E4300 overclocking

    As subject says, BIOS ver. 7.40, board rev.2.1, CPU works on other boards up to high 3GHz+ and on this one not even a megahertz over standard 200... Memory is not a subject, A-DATA Extreme, known to work up to 1GHz, cooling by TT Big Typhoon an PSU b

  • Oracle Forms Event in Finland

    http://www.oracle.com/technology/products/forms/htdocs/finland/invitation_f2soa.html If you are using Forms and based in this region, I think it would be a good idea to get along. Regards Grant