BI70 Hierachy duplicate node error

Hi,
We upgrade from BW 3.5 to BI70 SP9.
We have hierachy (loaded from PCFILE) based on 0GL_ACCOUNT, after upgrade i am getting dump error if i have duplicate interval node & activate. It works fine in BW35 also if i remove duplicate node, activation is not a problem. Infact all duplicates are not giving problem, somecase it gives error. Any changes in BI70 regarding duplicate nodes in hierachy ?
Your help is appeciated.
Thanks
Ramesh

We are upgrading from BW35 (SP10) to 2004s (SP9).
One of the step in the post process is SAP NW BI: Activating Hierarchy Versions, basically executing program RRINCLTAB_REBUILD. This gives dump, I try to activate hierarchy directly it gives same problem.
I tried as per previous suggestion, no solutions.
Any help is appreciated.
Thanks
Ramesh

Similar Messages

Hierarchy from flat file loading with errors - duplicate node names

Hello experts,
I am loading a product hierarchy from a flat file into a custom hierarchy
object. The issue is that it errors out saying I am loading
duplicates within nodes, however all node IDs within a level are unique.
It seems to be looking at the node name to determine uniqueness and I know
we have some duplication within the text there especially when you factor
in the 32 character limitation for the node name. Does anyone have an idea
as to whether it is possible to have it only consider the node ID instead
of the node name to determine uniqueness?
A colleague suggested using the link ID to fix this problem but I don't know how that field works or how to populate it.
I'm working in a BI 7.0 environment (I don't know if that makes a difference since you still have to use the 3.x objects to extract the hierarchy).
Any help would be appreciated.
Nancy

Hi Nancy,
You may wish to check this OSS Note 1026749 - Hierarchies: Consistency check for duplicate nodes and 912115 (old one)
Symptom -
When you load or activate a hierarchy it terminates with error message RH 109 or RH 211. The hierarchy contains duplicate nodes and this is not allowed. The long texts of messages RH 109 or RH 211 do not describe the reason for the problem sufficiently or they are partially incorrect.
There is uncertainty about in which cases duplicate nodes exist in a hierarchy and in which cases duplicate nodes are allowed.
Hope this helps,
Bye...
Naga Timmaraju

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Adobe Acrobat 8 Form Duplicate text error

Hello World!
I work for a school with 200+ computers installed with **. The problem I'm having is when a user downloads a PDF form from our web page and goes to start inserting data in the fields the text just duplicates in all the boxes. If you try and delete the text from any of the boxes it delets everything. I've tried repairing the install by running the original installer file. I've even reinstalled a test system and still duplicate this error. Please let me know if there is any other information I can provide that will help you help me.
Windows XP SP3
Office 2007
Adobe Acrobat 8

Hi,
This forum is not for Acrobat product.
Plaese post your question again in http://forums.adobe.com/community/acrobat if you haven't.
Thanks,
-- Hiroshi

Duplicate nodes in a JTree

Hello,
How i can i find duplicate nodes in a JTree. And give out a message that the node already exists.
Thanks.
Reg,
suri

The first you have to defind what is dublicating, because the node in the tree is a node itself (e.g. with label node name and icon) and node can have user object that can contains some defind logics and attributes like ID. And then if you just want to not alow to have node with the same name you will check node label. But if you want avoid adding the node with the same user object you have to implement some comparation mechanism on the node or user object lavel.
Hope will help.

Duplicate records error?

hello all
while extracting master data am getting duplicate records error?
how do i rectify this?
in infopackage screen in processing tab,will i get the option " ignore double data records",?
when will this option will be enable?
regards

Hello
This option will be available only for Master Data and not for Transactional Data. You could control the Duplicate Records for Transactional Data in ODS, there is an option in the ODS Settings.
***F1 Help
Flag: Handling of duplicate data records
From BW 3.0 you can determine for DataSources for master data attributes and texts whether the extractor transfers more than one data record in a request for a value belonging to time-independent master data.
Independently of the extractor settings (the extractor potentially delivers duplicate data records) you can use this indicator to tell the BW whether or not you want it to handle any duplicate records.
This is useful if the setting telling the extractor how to handle duplicate records is not active, but the system is told from another party that duplicate records are being transferred (for example, when data is loaded from flat files).
Sankar

Duplicate session error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with CF10

We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

Classic duplicate key error when processing dimensions

I have a dimension attribute that has a list of values below
atlanta
atlanta
Atlanta
Atlanta
Atlanta
ATLANTA
it has caused the duplicate key errors. I've checked the colloation property of AS server and it's set to Latin1_general with case-sensitive UNCHECKED.... I wonder why I still get this type of errors?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

You would need to use a case-sensitive collation for these not to be considered duplicates and even then, on closer inspection, I still see duplicates in your data. There are only three distinct case-sensitive values out of the six examples you've
provided: atlanta, Atlanta, and ATLANTA.
Jason

Duplicate nodes in hierarchy

Hi all,
I am currently working on building dynamical (build via FM) hierarchies. My problem is as following:
How can I build a hierarchy that uses masterdata texts for its nodes that can be multiple times in the hierarchy?
See product hierarchy example:
Site A (Nodename=SITEA)
-- Product Group 1 (PRODGR1)
-- -- Product 1
-- -- Product 2
-- Product Group 2 (PRODGR2)
Site B (SITEB)
-- Product Group 1 (PRODGR1)
-- -- Product 3
-- -- Product 4
-- Product Group 2 (PRODGR2)
This hierarchy wouldn't be generated because of the duplicate node names on level 2 (i.e. PRODGR1).
So how can I build up a hierarchy as above when I want to show the product group texts from its masterdata. The only way I see is to make the product group nodes identically (build NODENAME from combination of SITE and PRODGR) and build the description by my own. Does anybody know a nicer solution for this?
Many thanks for any hints in advance and best regards!
Edited by: Dominik Klaffke on Apr 1, 2008 2:19 PM
corrected description
Edited by: Dominik Klaffke on Apr 1, 2008 2:20 PM
formatting

Hello Dominik,
have you tried to use/generate the links in your hierarchy.
This is the standart way to have some master data value several times in one hierarchy.
Regards,
Kirill

Call Library node error [1]

Hi,
I've written a program to control the angular position by using PID control algorithm.
The program works fine but after certain amount of time. The system hanged and need to shut down the LabVIEW and restart.
The warning message pop up is showing in the attached file.
One more question, is it the PCI-6221 M-series card can used for real-time application.
Just for your information, I'm using:
- LabVIEW 7.1
- PCI-6035E
The program is attached to the message "Call Library node error [2]"
Thanks.
Best regards,
IANES
Attachments:
Error11.bmp ‏405 KB

Hi,
It would be very helpful if you could post the code you are using to generate this error. These call library errors can be caused by many things.
Check out the following KnowledgeBases:
http://digital.ni.com/public.nsf/websearch/0120D13E4B4C94BB86256A3F007695EE?OpenDocument
http://digital.ni.com/public.nsf/websearch/58596F5D41CE8EFB862562AF0074E04C?OpenDocument
-Sal

SCOM Network Discovery - Duplicate nodes with different Device Keys (MAC address)

Hi There,
We have deplyed SCOM 2012 SP1 for server and network monitoring. In the "Network Devices" view, there are few duplicate node entries for the same device. When i look at the details of each entry, the device keys (MAC address) are
different. for example, if there are 3 entires for the same device, only one will have the correct MAC address and remaining 2 are incorrect.
Have anyone came across such issue? Any solution to avoid the duplicates?
Thanks.
Venu.
Best regards, Venu.

Last Thursday (9/25/14), Microsoft provided me with an updated version of a file that is used as part of the discovery process. At first, it appeared to only resolve the issue for some devices which was disappointing. On Saturday, I decided
to remove all managed devices and rediscover everything from scratch. We have 237 devices to monitor. Since Saturday, I had one ICMP only device duplicate itself, but after I removed the duplicate, I have not had any other duplicates created and
there have been many rediscoveries ru nsince then. So far so good. I've asked Microsoft to keep the case open until next Monday. This weekend, I have a full discovery scheduled to run on a schedule. I'll feel good after that if there
are still no duplicates.
The file replaced is "ic-iftable.asl" which is located on each management server in the path ""\[ SCOM install directory]\Server\NetworkMonitoring\rules\discovery". I'm not sure if I'm allowed to share the updated version of
the file. I have not received an explanation from the support technician yet as to the root cause. They took at least 5 sets of trace logs during the discovery and subsequent rediscovery process before giving me this updated file. I'll let
you know.

Document contains too many nodes error when extracting xml tag name

I Have a large xml file in which the tag contains ~: as the value.
Now I am trying to extract all the tags which have ~: as the value and store that column using the following query and insert into a table.
insert into space_md select distinct xmltype(extract(value(x), '/').getstringval()).getrootelement() COLUMN_NAME
from gt_xmltype_tab gt, TABLE(XMLSequence(extract(gt.xmlfile1, '/ROWSET/ROW/*'))) x
where instr(extract(value(x),'/').getstringval(),'~:') > 1;
The xml file was generated using dbms_xmlgen.getxml. Table has 48 columns and around 4000 rows.
My above insert query gave me an error of 31186 too many nodes error.
I am using oracle version 10.2.0.3.
Following are the set of commands I ran....
SQL> insert into gt_xmltype_tab(xmlfile1)
values(XMLType(bfilename('BKUP_RES','QC.xml'),nls_charset_id('AL32UTF8'))); 2
1 row created.
SQL> SQL>
SQL> insert into restore_space_metadata select distinct 'QC', xmltype(extract(value(x), '/').getstringval()).getrootelement() COLUMN_NAME
2 from gt_xmltype_tab gt, TABLE(XMLSequence(extract(gt.xmlfile1, '/ROWSET/ROW/*'))) x
3 where instr(extract(value(x),'/').getstringval(),'~:') > 1;
insert into restore_space_metadata select distinct 'QC', xmltype(extract(value(x), '/').getstringval()).getrootelement() COLUMN_NAME
ERROR at line 1:
ORA-31186: Document contains too many nodes
Is there a better way of extracting the xml tag element name based on the xmltag content?
There is one other table which has 172 columns but only 100 rows so it doesnt create any problem on that table.
But this QC table has less columns but many many rows...
Any suggestions

There is a requiremnent of taking centain type of data backup and restore it.
It was implemented on flat file approach which was giving errors.
So it was implemented using XML approach.
Read data, store in xml file and read from xml file and load it into table.
Further, found that dbms_xmlstore is not able to handle tag only with whitespace
and tried to use the loading xml file into xmltype table column and extract data.
XMLTYPE column also has same problem of ignoring whitespace when used with extractvalue functions.
So for the workaround I update xmlfile having only one more more whitespace in the tag to have ~: character once.
After restoring data from xml to table I would run update qeury to update ~: to " ".
Now instead of running blind update for all the tables and all the columns from ~: to " " I thouhgt whyy not create a xml file of tag having ~:
along with its tablename.
and thats where I found the problem of too many nodes...
THe insert query you saw is populating table for table_name and column_name with tag having only ~: in it.
I hope this gives you the fair idea of stuff I am doing.

Duplicate record error

Hi,
I am using a ODS as source to update the master data infoobject with flexible update. The issue is in spit of using option ONLY PSA ( Update subsequently in data target ) in the infopackage with error handling enabled, I am getting Duplicate record error. This happens only when I am updating through process chain. If I run it manually, the error doesn't comes. Plz let me know the reason.
Thanks

Hi Maneesh,
As we r loading from ODS to info object we dont get the option "don't update duplicate records if exists"
first did u checked any duplicate records found in PSA?? if so delete them from PSA.
or one option is enable error handling in infopackage.
or
check any incosistencies for infoobject in RSRV and if found repair it and load again. check the inconsistencies for P,X,Y tables and for the complete object also.
*assign points if helpfull*
KS

Duplicate key errors table T7KR5CT occured during SHADOW_IMPORT_INC

Hi,
We are getting the following error during EHP4 upgrade :-
Checks after phase MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC were negative!
Last error code set: Unresolved requests in buffer SRD
Check logfiles 'SHDALLIMP.ELG' and '/EHPI/EHPI/abap/log/SAPehpi.ECO'
A trouble ticket and an archive with all relevant log files have been
generated.
Trouble ticket: "/EHPI/EHPI/abap/log/SAPehpi_troubleticket.log"
Log archive: "/EHPI/EHPI/abap/log/SAPehpi_troubleticket_logs.sar"
01) * Repeat phase MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC to continue at the point it stopped
02) - Initialize phase MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC to restart it from the beginning
03) - Exit this program
Choose action: Repeat phase MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC to continue at the point it stopped
Log file shows the following information :-
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPK-70105INPIBASIS.SRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 import portion 000000 - 000022 not imported because the child processes died for unknown reason
2EETW000 import portion 000023 - 000026 not imported because the child processes died for unknown reason
2EETW000 import portion 000027 - 000185 not imported because the child processes died for unknown reason
2EETW000 import portion 000186 - 000191 not imported because the child processes died for unknown reason
2EETW000 import portion 000192 - 000218 not imported because the child processes died for unknown reason
2EETW000 import portion 000219 - 999999 not imported because the child processes died for unknown reason
1 ETP111 exit code           : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPKE60416.SRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 child process 745784 terminated -> setting rc=12 for this import portion
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function:   db_docu
2EETW000 fcode:      CI_WRITE_LINE
2EETW000 len (char): 68
2EETW000 key:        NAHRPAYDEST601                                                EE0012
2EETW000 ok fetches: 0
2EETW000 retcode:    4
1 ETP111 exit code           : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPKE60425.SRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 12 duplicate key errors during insert into table T7KR5CT occured
2EETW000 12 duplicate key errors during insert into table T7KR5CT occured
1 ETP111 exit code           : "8"
/EHPI/EHPI/abap/exenew/R3trans finished (0000).
/EHPI/EHPI/abap/exenew/R3trans finished (0000).
/EHPI/EHPI/abap/exenew/R3trans finished (0004).
2EETW000 12 duplicate key errors during insert into table T7KR5CT occured
/EHPI/EHPI/abap/exenew/R3trans finished (0000).
/EHPI/EHPI/abap/exenew/R3trans finished (0004).
2EETW000 12 duplicate key errors during insert into table T7KR5CT occured
/EHPI/EHPI/abap/exenew/R3trans finished (0008).
ERROR: stopping on error 8 during SHADOW IMPORT
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 9).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 9).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
stopping on error 8 during SHADOW IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 8
SWARNS: Highest tp internal severe warning was: 0151
tp finished with return code: 151
meaning:
Some warning regarding buffer entries
Process with ID 807096 terminated with status 151
We tried to replace the R3trans with a latest version of R3trans and repeat the SHADOW_IMPORT_INC phase but still the same error is reported.
Can you please help us on this ?
Thanks in adavnce.
Regards,
SS

Hello,
I got the same problem in RPH EHP5 Upgrade Phase SHADOW_IMPORT_INC with table TWUF_CHECK~. After reading some notes (1074030, ...) I decided to restart the phase without any modifications and it worked and I'm happy!
Jörg
./R3trans -v
This is ./R3trans version 6.22 (release 720 - 02.05.11 - 15:56:00).
ALOG702:
SAPK-603DTINEAGLTRAD SID.ALL K 0012 20110901110222 EAGLTRADUSER sidadm       hostname 2011090109242911d001
SAPK-603DTINEAGLTRAD SID.ALL K 0004 20110901114000 EAGLTRADUSER sidadm       hostname 20110901113956128006
SHDALLIMP.ELG:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPK-603DTINEAGLTRAD.DE8
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 1 duplicate key error during insert into table TWUF_EVENT~ occured
2EETW000 sap_dext called with msgnr "16":
2EETW000 -
db call info -
2EETW000 function:   db_setget
2EETW000 fcode:      RT_GET (0)
2EETW000 tabname:    TWUF_CHECK~
2EETW000 len (char): 65
2EETW000 key:        CL_WB2_ANLYTLTRDGVWINVCIDQR   INPUT                         00002
2EETW000 ok fetches: 0
2EETW000 last entry:
2EETW000 retcode:    16
1 ETP111 exit code           : "12"

BI70 Hierachy duplicate node error

Similar Messages

Maybe you are looking for