BIA Server is Overloaded - part2

Good Day,
I know that there is already a thread about this problem, but it seems not to be resolved.
I understand that it could be a problem that the memory is out, but in my case it isn't 
My example:
    "The problem began when i execute the generation to a InfoCube with 7 billions of records.
In other case, after the overload problem, when i execute the generation of indexes for example 800 Millions records, it executes normal, but if i execute one smaller InfoCube, like 1 million records, then it writes in the log that the server is overloaded and can't continue and so on. Besides the help procedure that it gives, that have to delete all the indexes and restart the BIA server, it doesn't fix the problem."
My question: Is there a way for edit the .ini configuration files from BIA that it could eliminate this error notice or maybe something else?
I have the latest revision BIA v53, 3 Blades with enough memory =))
Thanks in advanced.

Hi, message is misleading.
Step one is and remains to verify the current utilisation through rsddbiamon2 -> trexadmin -> summary tab.
If this shows a value below 50%, have an extra look on the servers tab to check if one or more rfc-server have a high memory utilisation (normal 6 to 9%, in my last troubleshooting I had an rfc server running away with 48% of the memory ...).
When both are checked and no issues, then you can be pretty sure that you're looking into a faulty message, generated by memwatch-program. This program checks the response from all blades. When a blade doesn't return within xx mSec's you will get the message : BIA overloaded.
There can be quite some reasons why the response on memwatch layer is not within the limits : merge operations, intense reporting, reorg operation AND the issue mentioned above with the rfc server (and a loft more ..).
I didn't see the issue yet on version 53 will keep an eye on the customers where I have installed version 53 in the meantime.

Similar Messages

  • Causes for main memory to be unloaded - BIA Server is overloaded

    The check on our BIA server is showing "BIA Server is overloaded".
    The details indicate that the main memory was unloaded >900 times in the last 24 hours.
    I am not aware of any special activities taking place - what would be the cause of the main memory being unloaded so frequently?
    The indices only take up 25% of main memory, which is well below the 50% threshold recommended by SAP.
    What else might be the cause?
    Thanks

    Hi Experts,
    We are also getting the same Alert / Error in the SAP Net weaver BIA Monitor and we are not able to understand, how to go ahead with the same.
    1. The alert we're getting is "BIA server is overloaded". If we click on details it's showing the alert message as "Number of Times Main Memory Was Unloaded in Last 24 Hours: '1064'".
    2. We even tried doing a BIA Reorg and Restart activity, but in vain.
    Note: I. Before we did the BIA Reorg, the details message was showing as "Number of Times Main Memory Was Unloaded in Last 24 Hours: '2184'".
             II. We did a recent SP 22 upgrade and I'm not sure on where to check for the BIA revision?
    Any suggestions on this would be really helpful?
    Thank You,
    Karthik.Ch

  • BIA server is overloaded

    Hi
    BIA Server is overloaded with an error ...Returns the number of index attributes per host which was unloaded from memory within a given period of time
    thanks
    Shail

    Well, first you need to check if BWA was sized for all the cubes you have indexed. Then there are only two simple techniques for overload: either increase hardware capacity (by buying additional blades) OR removing some of the least important cubes from BWA. More expensive approach would be to analyze the indexed cube to see if they can be redesigned to decrease their memory footprint, but this is excercise going beyond forum abilities.
    Good luck,
    -Vitaliy

  • BIA Server problem

    Hi All,
    In the monitor screen,under the details tab  i  see 'BIA server is overloaded '  but the requests are rolled up and available for reporting.
    will it have an impact on the data in the reporting??
    Thanks,
    V.Singh.

    Hi,
    You have an elevated risk according to BWA best practices. You are receiving this alert because you are using more than 50% of the allocated memory in a given check point ( even if you pay 100% license you are supposed to leave 50% of the memory idle for temp indexes, query joins etc ) . This warning usually comes with many "number of memory unloads in the past 24 hours etc" warnings. But there is practically no impact to your reporting - this claim can be challenged by theoreticians.
    You either take a risk and just keep monitoring it so that it won't get worse, or remove a cube or two from BWA. But definitely consider planning "logically partition" your cubes . This will allow you to control the growth of BWA. Say you have a revenue cube; every physical/fiscal year copy the cube to a new cube and start loading to new cube and add the new cube under multiproviders. The next year you remove the oldest cube from BWA and introduce the new one..
    Besides this, look at the standalone Python tool to see the peek times. You may be just getting this warning in certain time window e.g while loading data to BWA and running information broadcasting queries at the same time..Or you may be running APD queries that used to cause a lot of issues - i am not sure if it's still the case.
    Cheers
    Tansu

  • BIA server over load problem

    Hi Experts,
    I have a problem wih our BIA sever overloaded and hence queries are getting terminated.
    I had a check in the BIA monitor we have status red
    Check for indexes loaded from the memory
    Check size of trace files
    BIA server is overloaded
    all the above status are red
    I am new BIA, can you guys please advise me on this how would I approach this and find a resolution.
    Thank you.
    Tati

    It's difficult to advise on the forum, without seeing the system. And as well permanent fix may not be a one click task.
    First thing to do: restart BWA system if possible. This would clean temporary indexes and unused indexes from the RAM. If your sizing was done correctly and you are running into overload issues - open a customer message to SAP Support - this never hurts.
    Next thing: to analyze the memory consumption on particular blades, analyze the indexes, put procedures and place and so on.
    If you are new to BWA and in charge of supporting it - get on BWA course. There are no shortcuts.
    Regards,
    -Vitaliy

  • BIA Server Overload, Report terminates

    Dear Experts,
    We are getting reading data error when execute a report, cause of bia has not enough memory,
    "amount of data to be read from the bia server is too large"
    How can i check how much memory used from this report via trexadmin tool,
    Best Regards,
    Edited by: atakan yavuz on Jan 7, 2010 11:09 AM

    Hi,
    When you run the report, go to TCODE RSDDBIAMON2 and click on 'BIA LOAD MONITOR ACTIVATE' to have look at how the memory parameters change on execution of this report.
    You might get this error in below cases :
    1. Too much data is extracted
    2. Exception aggregation used in the query.
    If yes, please redesign your query.
    Another option is to implement OSS notes mentioned in thread below:
    Re: max_cells_one_index
    -Vikram

  • BIA Server problem - Data package not consistent

    Dear All,
    I have a strange issue with my BIA server. When I run the report by selecting top most nodes of the hierarchy.
    Report ends up with message: No applicable data, and below error messages
    Aggregates of ZFICSC22 were compressed. Data package is not consistent
    Error while reading data, navigation is possible
    The report works fine when I select the subsequent nodes (immediate lower nodes) of a hierarchy.
    The report also works when I execute bypassing the BIA
    I have cleaned up all the hierarchy buffer but the problem persists
    As of now I am left out with last option which is rebuilding the indexes unless any one of you comes up with a better solution.
    Thanks & Regards
    Ziya
    Edited by: Ziyauddin Mohammed on Dec 5, 2008 4:02 PM

    Hi,
    Have you implemented OSS Note 1163991?
    There is nothing like data package compression in BIA.
    Regards,
    -Vitaliy
    Edited by: Vitaliy on Dec 5, 2008 9:08 AM

  • The server was overloaded. Impossible to process data.

    Hi,
    We are running into a condition 503 Service Unavailable when a user logs in via SAML2. To replicate the scenario I log into the SAML idp which tkes me to the portal. I click logoff which then puts me back onto the idp login page. I login again and then get  a 503 error. This started happening after activating SAML2 in the portal. The Portal is running on NetWeaver 7.31 sp11.
    In the default trace I see the following.
    #2.0 #2014 11 11 16:10:49:241#0-500#Error#com.sap.engine.services.servlets_jsp.Security#
    com.sap.ASJ.web.000657#BC-JAS-WEB#servlet_jsp#C0008E96B61600AF0000000000008E2C#643695450000000004#sap.com/irj#com.sap.engine.services.servlets_jsp.Security#J2EE_GST_SWP#0##2B438FBD69E711E497D10000265E035A#ec29bc3669e611e494890000265e035a#ec29bc3669e611e494890000265e035a#0#Thread[HTTP Worker [@614087135],5,Dedicated_Application_Thread]#Plain##
    Service not available. Details: The server was overloaded. Impossible to process data.#

    Hello,
    We are facing same issue - we are on Ep NW 7.30 SPS 12.
    I could find below SAP Notes which were recently released
    2132887 - SAML2 log out from the portal fails. Error "Server is overloaded. It is impossible to process data" might also occur
    2133307 - Improve the DoNotLogoutResources Option in SAML 2.0
    Note says tp edit parameter DoNotLogoutResources by adding URL - /irj/servlet/prt/portal/prtroot/com.sap.portal.dsm.Terminator in SAP NetWeaver Administrator under Configuration -> Authentication and Single Sign-On -> Authentication -> Components, in the SAML2LoginModule.
    Is that we need to Edit the Login Module Options and add this?
    Did any one give a try? Please suggest
    Thanks,
    Subbu

  • Sony Ericsson server is overloaded

    Please help I heard that u can fix lag on ICS if you repair your phone but I cant repair cuz it says Sony Ericsson is overloaded...
    I try to repair my phone everyday but anytime I repair it says the same SH!T!!!
    I wasnt even able to update my phone via PCC I had to use Update Center.
    BTW my English is bad -.-

    Use sus http://www.sonymobile.com/global-en/tools/update-service/
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Number of times main memory has been unloaded in last 24 hours "0"

    Hello Experts,
    I am getting  error "BIA server is overloaded"  in RSDDBIAMON2 tcode.  
    Description is below:
    BIA server is overloaded
    Message no. RSD_TREX154
    Diagnosis
    The SAP NetWeaver BI Accelerator server is overloaded. Either there has recently been a forced unload of the BIA main memory, ort he total volume of loaded data exceeds the limit of 50% of the available main memory.
    Both these situations negatively impact the stability of the BIA server.
    Procedure
    You have two options:
    Decrease the volume of data in the BIA: Delete BIA indexes that you do not currently need or that you do not urgently require.
    Contact your BIA hardware partner and carry out a new sizing for the BIA hardware.
    Procedure for System Administration
    By default, this message only appears as a warning in processes that index large volumes of data in the BIA. You can use administration parameters to specify this warning as an error message as well. This causes all index processes to terminate if the error occurs.
    To do this, execute program RSDDTREX_ADMIN_MAINTAIN with parameters Object= DONT_IGNORE_BIA_OVERLOAD, Value = X, and INSERT/UPDATE = X.
    Diagnois says
    1) The total volume of loaded data exceeds the limit of 50% of the available main memory,I have already checked the disk used for storing the indexes  and it is not more than 50% of the BW Accelerator main memory.
    2)There has recently been a forced unload of the BIA main memory:  As per error details  Number of times main memory has been unloaded in last 24 hours: '0'  ie no unloaded had happened in last 24 hours.
    Please help me how i can solve this erro as there is not unload happened and also disk usage under control.
    Regards,
    Akshay

    hi,
    1) You can check the traces via the trex standalone tool trexadmin or transaction TREXADMIN. You must provide more details to get an analyze. Was there running a lot of process chains at this time? Have you checked the memory monitoring of the BWA blades?
    2) transaction TREXADMIN -> tab version..
    You can try going through SAP notes which help with high memory issues.
    Sometimes, the rfc server sometimes takes a lot of memory and doesn't free it afterwards.
    Thanks,
    Sheen

  • Application server queue overflow,application server overloaded currently

    dear Experts,
    please check my problem and give me one solution
    here iam trying to solve this problem but not getting result i,e
    today i installed one system (nw2005sr3) and after that
    i created one client for log in to this client i created parameter and save it
    then i stoped my application server and started after
    when i double clicked my gui application server is shown an error that error is
    Error:
    application server queue over flow
    application server is overloaded currently,try another application server do you want to see error log
    what happened for my server please give me some guidence for solution
    Regards
    Edited by: swathimatta on Sep 21, 2010 5:27 PM

    hi Experts,
    its my mistaq my version is wrongly typed nw2004s
    i tried for to check from os level
    but dpmon also not found
    i did not get what is an error
    why is shows this error and what is this means (application server overflow)
    Regards

  • Server Error 503: SC_SERVICE_UNAVAILABLE: HTTP server is temporarily overlo

    Hi
    The wrong is that :
    Server Error 503: SC_SERVICE_UNAVAILABLE: HTTP server is temporarily overloaded, and unable
    I'd like some information about it.
    In my application i don't have pool connection and it's in production right now, my boubt is: Can i have problem of slowness in some process?
    Because sometimes i have slowness in some process and sometimes i don't have.
    I belive that happen when my server is overloaded,
    when isn't overloaded the process run ok.
    If i implent the pool the connection at application Can solve the problem?
    Thanks
    Jose Vieira

    I think we'll need some more information.
    Let's start with your working environment (development mode + autodeployment). Now if you change to deploying it yourself does it still work? If not, please give me more details on exactly how you're deploying it.
    Also, can you show me the server log, especially any messages or errors around your application's deployment.
    -- Rob
    WLS Blog http://dev2dev.bea.com/blog/rwoollen/

  • Appstore Lion Download Getting: 500 Internal server error!!

    Really Really Sad now :'( I just want to install my LION and I keep getting this 500 internal server error, doesn't matter how many times I try...

    I have installed Lion on my Macbook Pro with no problems (yesterday) and am currently installing on my Macbook Air (as I write this), yet the install on my Macmini keeps getting the 500 Internal Server Error message.
    This is only my guess but I think the App Store server is overloaded at the moment and will clear you (and me) for download as it's able. The error message has nothing to do with your Macs.
    Patience will prevail I suspect.

  • Spreadsheet plugin vs specific type of Oracle server

    Hi, I'm a client level user. My Knowledge is very low. But the amounts of data to use for reports get bigger and bigger. I could suggest my manager the use of this plug-in. But I should know, before, if the server type is important, or if any else (ORA OLE DB) can support the use of the plug-in.
    I hope anyone can answer my question. Then a competent technician could be asked to install it if compatible.
    Thanks and best regards.
    Chordially

    Hi,
    Despite the lack of knowledge,
    Despite the unanswered (non interesting for specialists ?) question,
    Because I am really concerned and seriously interested by an integrated solution as an end user,
    And Because the specialists dedicated to the server are overloaded,
    I have to structure my demand enough to highly class it through the development priorisation.
    I had to know if, and in this case, how the Oracle BI spreadsheet Add-in can work with the server used in "my" Organization.
    So, One week later, I found something by myself.
    I had to search, read a lot. loose lot of time. I could discover other tools and applications, not only servers, some are opensource and in the particular cases of Talend and Palo, that I explored too, I found lots of answers very quickly.
    I still have to read this document that any specialist could have shown to me :
    http://download.oracle.com/docs/cd/B14117_01/olap.101/b10333.pdf
    5 lines of abstract (guidlines) would have given me an idea.
    Better chance next time
    Chordially

  • BIA Error 2625 & 2613

    Hi Experts,
    We are using BIA rev. 47 and BI SPS12. Sometimes when we fill the index for an InfoProvider, and at the same time run a query on a MultiProvider based on the mentioned InfoProvider, we get some error messages, and no data is fetched.
    The error messages are:
    Error while reading data, navigation is possible.
    Errors occurred during parallel processing of query
    Error reading the data of InfoProvider <name of BIA index>
    The following error 2625 occurred in BIA server
    The following error 2613 occurred in BIA server
    Error executing physical plan: executor: communication problem
    Sometimes the infoproviders mentioned in the error message are not even the same as the one which index is being filled, sometimes the InfoProviders reffered to are the other InfoProviders used in this query.
    Have anybody else seen these errors, and do you have any solutions on how to solve them or further investigate them? They do not create any dumps in the system which could have been analyzed further.
    Thank you in advance,
    Mikael

    Hi Vitaliy,
    Rev48 was released on Oct 15 in the evening. I installed it yesterday morning(Oct 16) and till now it seems to be that many of my problems I had in Rev47 are solved.
    Problems I had:
    - After create new indices there will be an initial reorg and if the process chain use this index, it will be blogged and the process chain abort.
    - no stable services, many aborts from the nameserver services
    - I can´t run with backup mode mutual, the take-over from the backup note worked not fine
    Till now the behaviour is good, but after 1 day this is not representative
    Best Regards,
    Jens
    Edited by: Jens Gleichmann on Oct 17, 2008 8:23 AM

Maybe you are looking for