[BIACM0085] Error executing load plan after reverting from LDAP to original security mechanism in BIA 11.1.1.7.1
We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
Luc
We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
Luc
Similar Messages
-
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
Hi All,
I'm getting below error when running a webi report in 4.1.
Could you please let me know why and what to do for this error?
Also let me know if any more info required.
Error Message:
Database error: Error in MDDataSetBW.GetCellData. Error executing physical plan: AttributeEngine: no 6952. (IES 10901)
Thanks & Regards,
Karthick.Are you seeing this error for every report? or just for this report? Looks like it is DB error. Contact your DBAs
-
Error while loading Reported Financial Data from Data Stream
Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
AmirFound the answer with OSS Note: 642591.....
Thanks -
Dear all,
When I tried to execute the Load Plan , I get this error:
ODI-1551 the dbms_lock acquisition faild with sql exception
OR06550: ????1?????7.
PL00201: identifier 'DBMS_LOCK' must be declared.
OR06550: ????1?????7.
PL/SQL statement ignored.
Thank you,The link as below maybe helpful
dbms lock must be declared -
Load plan not starting from point of failure in obia 11
hi,
I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
Can someone explain how to use ODI start from point of failure feature in OBIA.
Thanks,
PareshJamesW wrote:
That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
Pesky Oracle Thanks guys for your help
FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
In this example, I don't even have a database named fubar ...
oracle:fubar$ pwd
/u01/app/oracle/product/11.2.0/db_1/dbs
2013-08-15 10:52:29
oracle:fubar$ ls -l init*
-rw-r--r-- 1 oracle oinstall 2851 May 15 2009 init.ora
-rw-r----- 1 oracle oinstall 35 Jan 31 2013 initorcl.ora
2013-08-15 10:52:36
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:52:39
oracle:fubar$ export ORACLE_SID=fubar
2013-08-15 10:52:48
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='init.ora';
File created.
SQL> exit
Disconnected
2013-08-15 10:53:05
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:53:07
oracle:fubar$ -
Error executing db6_update_db.sh after DB2 9.7 FixPack 4
Hi experts,
We are encountering error while executing db6_update_db.sh after DB2 9.7 FP4. Has anybody encountered the same error? Any SAP notes you could suggest? Below are some informations on the error. We would appreciate any response and help to resolve the issue. Thanks in advance.
Executing the script:
db6_update_db.sh script version 0026 *
detected DB2 Release: 090704
./db6_update_db.sh version 0026 started on Fri Mar 2 03:25:34 GMT 2012
Generate Script Header : OK
Check and create 16K Bufferpool if required : OK
Run db2upd tools according to release if required : OK
Invoke the db2sap libary : OK
Rebind packages : OK
Establish sysdummy workaround : ERROR
ERROR: SQL error occured.
Failed with return code 2. Please look for problems in the log file /db2/db2k3d/
db6_update_db.log
./db6_update_db.sh finished successfully (RC=0) on Fri Mar 2 03:25:37 GMT 2012
Checking the logs.
DEBUG: () : ACTION_TEXT: Establish sysdummy workaround
Establish sysdummy workaround
DEBUG: sqlExecute() : entry
DEBUG: () : PARAM_SQL_FILE:
/db2/db2k3d/db6_update_db_out.sql
DEBUG: () : SQL_LINES_BEFORE: 42
DEBUG: () : PARAM_SQL_STMT:
SELECT 'GRANT SELECT ON TABLE SYSIBM.SYSDUMMY1 TO PUBLIC;'
FROM TABLE( VALUES( 'PUBLIC' ) ) AS SAPAUTH( USERNAME )
LEFT OUTER JOIN ( SELECT GRANTEE
FROM SYSCAT.TABAUTH
WHERE GRANTEE = 'PUBLIC' AND
GRANTEETYPE = 'G' AND
TABNAME = 'SYSDUMMY1' AND
TABSCHEMA = 'SYSIBM' AND
(SELECTAUTH = 'Y' OR SELECTAUTH = 'G')) AS TABA
UTH
ON SAPAUTH.USERNAME = TABAUTH.GRANTEE
WHERE TABAUTH.GRANTEE IS NULL
SQL1024N A database connection does not exist. SQLSTATE=08003
DEBUG: () : ERRORHmm, interesting.
db6_update_db.sh is a ksh script. I have a PMR open for seemingly similar problems with ksh93 disconnects since upgrading to AIX 7.1 from 5,3. Previous the same script worked fine. Further testing has found similar problems under fewer circumstances with AIX 5.3. We haven't encountered the issue with ksh yet, but who knows...
As Thomas suggested, DB2DBDFT masks the problem so long as a persistent connection is not required.
Regards,
Jeremy Rickard -
Error while loading data after level 17 patch
Hi all,
A week ago we had patch level 17 implemented on our SAP NetWeaver BI 7.0 system. Since then, we cannot load any data to some cubes using update rules. We get "Error when generating the update program" (Message no. RSAU484), status red while loading data.
I tried activating the update rules
We get te same error when loading data from a DSO into a cube.
The strange thing is that it doesn't happen for all the objects in the system. We have troubles loading deltas from 2LIS_12_VCITM (delivery items), 2LIS_13VAITM (sales order items) and from a BI content DSO in assets accountng.
Please if you have any idea or if this happend to you, i appreciate any suggestion.
This is not an implementation, these processes are already live for months, and we didtn't have any problems before the patch..
thanks,
AndreeaWe ran into same issue & another one during our BI 7.0 SPS15/SP17 upgrade.
The solution:
1. Apply 2 notes:
[Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update|http://service.sap.com/sap/support/notes/1146851]
[Note 1152453 - Termination generating InfoCube write program|http://service.sap.com/sap/support/notes/1152453]
2. Then run program RSDD_RSTMPLWIDTP_GEN_ALL
to generate the new programs for InfoCubes from the template RSTMPLWIDTP and cleans up the staging table RSUPDINFO per note 1152453. -
Critical Hard Disk Free Space Error on Lenovo G500 after upgrading from Win8 to Win8.1
I encountered an error with my harddrive after upgrading my Lenovo G500 from Windows 8 to Windows 8.1. The error is coming up under the Lenovo Solution Center. The error reads "Some partition in your hard drive has less than 9.5% of its capacities. It suggests to click on Fix Options; System; Storage Devices. Then it displays Internal Hard Drive ST1000LM024 HN-M101MBB.The solution center now displays 8 different partitions labled as follows:
Drive Name: Space:
W: WINRE_DRV. 694.99 MB free of 999.99 MB
E... EFI SYSTEM 260 MB
U.. UNAMED PARTITION. 0.97 GB (THIS IS THE DRIVE PRODUCING THE ERROR)
M. MICROSOFT RESERVED PARTITION. 128 MB
C. MICROSOFT RESERVED PARTITION. 850.43 GB FREE OF 890.72 GB
W. WINDOWS RECOVERY ENVIRONMENT. 155.46 MB OF 449.99 MB
D: WINDOWS RECOVERY ENVIRONMENT. 22.74 GB FREE OF 24..99 GB
P...PBR_DRV. 1.8 GB FREE OF 13.01 GB
I have tried to run disk clean up and optimize drives which were suggestions from the Lenovo Solution Center but neither has been successful in removing the error. Any assistance you guys can provide will help me out a lot
Thanks,
DanI got an error when i tried disk repair ("the underlying task reported failure on exit - 1 HFS volume could not be repaired, 1 volume could not be repaired"). Is that the source of my problem?
Hi and a warm welcome!
Absolutely, good deduction.
If DU can't fix it after a couple more tries then, your best bets are DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This last one would require another HD with plenty of space to recover to.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD. -
Error in loading data into PSA from source system.
Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman -
Issue to connect Apex 3.2 after reverting from 4.0
Hi,
I did by mistake (SID error) an upgrade from Apex 3.2. to Apex 4.0 on a DB 10g R1 which is not supported by 4.0. - I regret by the way that the APEX 4.0 installation doesn't make any check on the DB version before executing..
Well I followed the instructions to revert to 3.2 (clearly mentioned in the Installation manual of Apex 4.0) but now I can't log in on my Apex 3.2 environment receiving the following error (Admin & Dev environments)
ORA-06508: PL/SQL: could not find program unit being called
Unable to run page sentry in application 4500.
Return to application.
I also checked the DBMS registry and I couldn't find 'APEX' in it.. That might be the reason ..?
Given that I have some applications in my Apex environment, I want to avoid to launch the apexremov.sql procedure & I think that I miss a little procedure to solve my issue..
Any idea ? As to me if I can solve the way the APEX installation or removing procedure updates the dbms_registry it would be quite helpful
Thxs in advance for your help.
Brgds,
Yves
Edited by: ymoricea on Oct 15, 2010 1:35 AM
Edited by: ymoricea on Oct 15, 2010 1:37 AMHi,
I've solved my issue and I'd like to share what went wrong.
After further investigation, I found that "Invalid Credential" page was not
affected by any actions I took. So I tried to change XML DB HTTP port
number then everything went wrong.
It seemed that not until changing/restarting XML DB HTTP listener,
the page of "Invalid Credentials" was just a cache in the listener and
not an actual response from APEX.
Cheers. -
Error executing ODIMoveFile process after Essbase interface
Hi
I have created a package with execution of ODIMoveFile after Essbase extraction interface, in following order:
1. An interface extracts dimension from Essbase into a txt file
2. ODIMoveFile to move(not copy) this file at other location
Now when i execute this package, the interface to extract the dimension executes fine and it gives the output in file.
But during the execution of ODIMoveFile, it gives error saying, the file could not be deleted.
Now, once the extraction of dimension members is complete, why does ODIMoveFile not able to move the file?
I also tried to replace the ODIMoveFile with OS command which executes a Bat file to copy the file & then delete it. This time, the second part continues to execute for long duration without giving errors & i need to manually stop it.
Moreover, when i tried to manually delete the file, i am unable to do so, giving error that the file is in use.
Does the control over the file does not get removed even if interface completes execution??Hi,
I think there is a lock of the file until the package has completed.
There is a way round this.
Create a package with the extract measures interface.
Create a scenario from the package.
Create another package, use the tool OdiStartScen to start the Scenario you created above.
Next step have the OdiFileMove.
Ok?
Cheers
John
http://john-goodwin.blogspot.com/ -
Error executing the Query after deploying and executing the application in WLS 6.1 SP3
Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic -
Error when Refresh Planning after adding attribute V9.2.1
Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
JeffHi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM -
Error on starting MDS after upgrading from MDM 7.1 sp04 to sp05
Hi ,
I tried to upgrade my local setup from sp04 to sp05.
I used sapins to upgrade with update option.
In the second last step when we get option to which server you want to start after upgrading i select all three servers
i.e. mds ,mdis,mdss
This installation completed with error.
In the log file i found this logs.
The problem is i am able to start mdss and mdis of updated sp but not mds.
In the console i can see the version of mdss and mdis to sp05 but there is no version coming in the case of mds.
Please help me on this isssue
WARNING 2010-07-22 00:46:55.224
Execution of the command "C:\usr\sap\MDM\MDS00\exe\sapcontrol.exe -nr 00 -host INLD50054767A -function
GetProcessList" finished with return code 4. Output:
22.07.2010 00:46:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
mds.EXE, , GRAY, Stopped, 2010 07 22 00:42:21, 0:00:00, -1
INFO[E] 2010-07-22 00:46:55.224
CJS-30086 Instance MDM/MDS00 [STOP] did not start after 5:00 minutes. Giving up.
ERROR 2010-07-22 00:46:56.318
FCO-00011 The step startUpdatedInstances with step key |MDM_Update|ind|ind|ind|ind|0|0|startUpdatedInstances was executed with status ERROR .
Thanks,
SudhanhsuHi Sudhanshu,
You could check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed. It solved same problem on our side.
Best regards,
Jah
Maybe you are looking for
-
Safari will no longer open. It just goes back to my desktop. When I right click on the safari icon in my dashboard it says it is open. I was using firefox until I could find a fix for safari. I made the mistake of changing my default search to fir
-
Installation of Oracle 8.1.5 on Linux Red Hat 5.2
I successfully downloaded Oracle Entreprise Server i8.1.5 (260 Mb). But I did not succeed to install it. I've go a problem with the script runInstaller. When I run it, nothing happens. When I try to run the run time itself, it cores. At least, it mus
-
Generating XML content with SAX including schema reference
Hi all, XML newbie question here. I'm trying to generate an XML document from a certain file format using SAX, but I can't figure out how to get the generated XML document to include a schema reference. Here's the code, it's taken from posts on this
-
ExternalInterface not returning chinese characters
I've got a Flex application embedded in a PDF. Also in that PDF is a field (hidden text field) called Data containing XML that happens to contain chinese characters. The encoding for the XML data is UTF-16. To retrieve the data, I make a JS call (g
-
Hi, The following is a public attribute in the class CL_MEREP_SYNCBO_META data FIELD_GROUPS type MEREP_TSYNCBO_FIELD_GROUP read-only . MEREP_TSYNCBO_FIELD_GROUP is a table type having ref type CL_MEREP_SYNCBO_FIELD_GROUP (which is a class) What is t