[BIApps7.9.6.4Upgrad]DAC Server cannot shutdown

Hi grus,
I configured the DAC server and DAC repository connection by standaloneserversetup.sh on linux.
After configured and restart DAC server, the DAC server couldn't be shutdown.
Has anyone met the similar situation or had any solution?
(biafrey@ywadapp1:~/dac)$ . ./stopserver.sh
OS detected: Linux
Feb 12, 2013 3:01:34 PM com.siebel.etl.etlmanager.DerivedConstants getDacDomainHome
INFO: The DAC_DOMAIN_HOME set to /u01/frey/biafrey/dac
Feb 12, 2013 3:01:34 PM com.siebel.etl.etlmanager.DerivedConstants getDacConfigLocation
INFO: The DAC_CONFIG_LOCATION value hasn't been found, the USERDIR value was used instead
Feb 12, 2013 3:01:34 PM com.siebel.etl.etlmanager.DerivedConstants getDacConfigLocation
INFO: The DAC_CONFIG_LOCATION set to /u01/frey/biafrey/dac
Feb 12, 2013 3:01:34 PM com.siebel.etl.etlmanager.DerivedConstants getOracleDacHome
INFO: The ORACLEDIR set to /u01/frey/biafrey/dac
Feb 12, 2013 3:01:34 PM com.siebel.etl.bootup.DAWUtils main
SEVERE: WARNING: SENDING A TERMINATE REQUEST TO THE SERVER IN TEN SECONDS!
The DAC server will be halted even if an Execution Plan is running.
The status of such a running Execution Plan (if any) will be reset upon restarting the DAC server.
You can cancel this operation by pressing ctrl-C.
Feb 12, 2013 3:01:44 PM com.siebel.analytics.etl.conf.RepositoryPropertiesManager refresh
INFO: Reading repository properties
Feb 12, 2013 3:01:44 PM com.siebel.etl.database.ConnectionManager init
INFO: Creating repository pool
Feb 12, 2013 3:01:44 PM com.siebel.etl.bootup.ApplicationManager <init>
INFO: Application booting up...
Feb 12, 2013 3:01:46 PM oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: line 2 column 272.
Feb 12, 2013 3:01:48 PM com.siebel.etl.database.ConnectionManager init
INFO: Creating repository pool
Feb 12, 2013 3:01:49 PM com.siebel.etl.database.ConnectionManager init
INFO: Repository pool created
Feb 12, 2013 3:01:50 PM com.siebel.etl.database.ConnectionManager init
INFO: Repository pool created
Feb 12, 2013 3:01:50 PM com.siebel.etl.bootup.DAWUtils checkPermission
SEVERE: Checking the localhost with the values defined in the DAC repository!
Feb 12, 2013 3:01:50 PM com.siebel.etl.bootup.DAWUtils checkPermission
INFO: Adding server name : ywadapp1
Server shutdown request received by QServer.
(biafrey@ywadapp1:~/dac)$
Best Regards,
Takashi Matsugi

No..There can be n number of failed EP in in run history.It will not be an problem..I am sorry I don't know how to run from command prompt.
you says you cant communicate to DAC server from client ,and now you says you cant shutdown also..I am bit confused here
Can you paste the logs from DAC server from server?.
Can you try restarting machine?.
Can you also kill Java process which runs for DAC?..
Regards,
Veeresh Rayan

Similar Messages

Cannot connect to DAC server OBIA

Hi All,
Can any one help ..When i am trying to testconnection in the Data Warehouse Analytical Console Physical DataSources tab it is giving this prompt
Can't connect to DAC server.Please verfiy that is runnnig and connected to the same repository as this client.
Can any one suggest me the solution...
Thanks in Advance..

The DAC Server will fail to start if your Java enviornment is in a folder with spaces in the path. Which is in fact the installation default. Test running the DAC start .bat by opening a DOS window and navigating to C:\OracleBI\DAC. If it is a Java issue it will show up there.

Problem in starting the DAC server

Hi,
Someone please help me.
I have installed DAC 11g in my 64bit windows 7.
Whenever I try to start DAC server by clicking startserver batch file I get Windows cannot find '-server'. Make sure you typed the name correctly, and then try again.
Please help me.
Thanks.

Hi,
NoClassDefFoundError signifies that there is a classpath problem.
May be you are missing some critical jars in your classpath
for ex. weblogic.jar, jdk's rt.jar or something else.
You need to find this out.
HTH
VJ

Starting the DAC Server

Hi All,
For installing OBIA 11g i have installed OBIEE 111g and DAC 11g.
While staring DAC server using startserver.bat file i am getting error like windows cannot find '-server'.Make sure typed name correctly, and then try againAnd startserver.bat file cotains following content
title Oracle DAC Server
call config.bat
Rem Uncomment the below if you want to see a DOS window with messages.
Rem and comment out the JAVAW line.
Rem
Rem %JAVA% -Xms256m -Xmx1024m -cp %DACCLASSPATH% com.siebel.etl.net.QServer
Rem
start %JAVAW% -server -Xms256m -Xmx1024m -cp %DACCLASSPATH% com.siebel.etl.net.QServerHelp me regaring this.
Regards,
Haree

Check in config.bat file, some times dac path set to . instead of actual physical location.
let us know updates

DAC server start-up error and Can't authenticate user

HI,
we have installed DAC server in Linux machine and client on windows. By using DAC client we restored the backup of DAC repository, DAC client was working fine still restoration and after restoring it’s not logging in. It throws error like "Can't authenticate user"
while starting DAC services in Unix server it throws an error like
ANOMALY INFO An exception occurred. Shutting down server...
MESSAGE:::/u01/DAC/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
EXCEPTION CLASS::: java.lang.UnsatisfiedLinkError
Note: since DAC client is not separately available for windows we have installed dac server also and while installing and after installing we never configured to connect to the dac server which is in Linux, we have configured only DB.
we have successfully installed OBIEE, Informatica, and DAC version is 10.1.3.4.1.
How to start the DAC services?
How to configure dac client to connect to DAC server and how to solve this "Can't authenticate user" issue?
Pls help in this regard.
Thanks in advance.

EddyLau wrote:
Hi,
I encounter the "Can't authenticate user" error in DAC first setup after installation when it prompt up to ask for setting up administrator id and password.
here's my sql statement to create database schema for dac in oracle database.
grant dba, connect, resource, create view, create session to SSE_ROLE;
create user DEV_DAC identified by "password";
grant DEV_DAC to SSE_ROLE;
grant dba, connect, resource, create view, create session, grant any role to DEV_DAC;
I tried dropping the data schema and create it again but still fail to authenticate.
did I grant enough privileges to the database schema?
Please help.
Thanks,
EddyLogin to DEV_DAC using the credentials from SQL Developer or sql
Then do select * from W_ETL_USER -- here you will see 2 Administrator id's listed
now run the command Delete From W_ETL_USER
Now login to dac client with Administrator and pwd which you have set earlier.
Mark as helpful or correct if it helps
Thanks,
RM

DAC server shutting down

Hi All,
The DAC server is shutting down daily.Below is the error.there is no problem while executing the plan.
The DAC kept idle while i leave and it gets shutdown next day i log in to system.
Please help me in resolving this issue.
MESSAGE:::No more data to read from socket
EXCEPTION CLASS::: java.sql.SQLRecoverableException
oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1157)
oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:290)
oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1044)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3674)
oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1354)
com.siebel.etl.database.cancellable.CancellablePreparedStatement.executeUpdate(CancellablePreparedStatement.java:91)
com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:1128)
com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:1253)
com.siebel.etl.database.WeakDBUtils.executeUpdate(WeakDBUtils.java:355)
com.siebel.etl.engine.core.DatabaseLogger.executeUpateWithRetries(DatabaseLogger.java:827)
com.siebel.etl.engine.core.DatabaseLogger.logStatusOfThisGenericTask(DatabaseLogger.java:340)
sun.reflect.GeneratedMethodAccessor38.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.siebel.analytics.etl.runtime.RuntimeFunctionHelper.executeFunction(RuntimeFunctionHelper.java:132)
com.siebel.analytics.etl.etltask.GenericTaskImpl.logToDB(GenericTaskImpl.java:766)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:427)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
java.util.concurrent.FutureTask.run(Unknown Source)
java.util.concurrent.Executors$RunnableAdapter.call(Unknown Source)
java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
java.util.concurrent.FutureTask.run(Unknown Source)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
java.lang.Thread.run(Unknown Source)
2220 SEVERE Thu Dec 26 20:09:43 MUST 2013 Connection to Repository Lost, exiting...
2221 SEVERE Thu Dec 26 20:09:43 MUST 2013 ### DAC Repository connection lost. Shutting down the server....
Regards
JS Kiran

Hi Sher,
Thanks for reply,i have checked the DB and it is version oracle11g which is compatible.
this is the latest error.
Post-Etl Script/Executable. The file either does not exist, or is not readable
753 SEVERE Mon Dec 30 20:10:23 MUST 2013
ANOMALY INFO::: null:SELECT
FROM
W_ETL_SCHEDULE
WHERE
(LAST_SCH_STATUS <> 'Running' OR LAST_SCH_STATUS IS NULL OR LAST_SCH_STATUS = '')
No more data to read from socket
MESSAGE:::No more data to read from socket
EXCEPTION CLASS::: java.sql.SQLRecoverableException
DAC Repository connection lost. Shutting down the server....
regards
kiran

Server get shutdown automatically

Dear All,
We are working on PServer4.1 and facing problem in batch file for same. While getting the following exception --"java.sql.BatchUpdateException: ORA-01400: cannot insert NULL into ("LOSDEV_NEW"."LOS_APP_DOCUMENT"."LAD_LDD_DOCID_N") " --
due to which server get shutdown automatically .
Can anyone provide me any suggestion for same ASAP.
Rgds,
Gurpreet

Dear All,
We are working on PServer4.1 What the heck is that?
and facing problem
in batch file for same. While getting the following
exception --"java.sql.BatchUpdateException:
ORA-01400: cannot insert NULL into
("LOSDEV_NEW"."LOS_APP_DOCUMENT"."LAD_LDD_DOCID_N")
] " --So somewhere in this is an Oracle DB server.
due to which server get shutdown automatically .Which server is shutting down?
ASAP.
I'll bet. Kill the production server did you?

DAC Client in windows is not connected to DAC server in Linux

Hi,
I am using DAC 11g and server is in linux and client in windows.The status icon is still red
1)we are unable to connect the client to the server in linux.
2) we have checked that the DAC server in linux is up by running the command ps -ef | grep "com.siebel.etl.net.QServer".
3)even we have checked the connectivity with telnet and even the port 3141 is also opened
4) we have followed all the step suggested in previous thread
Anybody help me.
Edited by: 975976 on Apr 26, 2013 2:24 AM
Edited by: 975976 on Apr 26, 2013 2:24 AM

My DAc server is running fine.
In DAC server setup i entered the details.Also DAC DB is running fine.
Any other solution please.
Also when i am trying to run ./standaloneServerSetupPrompt.sh i am getting following error:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/oracle/Java/jdk1.7.0_21/jre/lib/i386/xawt/libmawt.so: libXrender.so.1: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.load0(Runtime.java:792)
at java.lang.System.load(System.java:1059)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1846)
at java.lang.Runtime.loadLibrary0(Runtime.java:845)
Can you tell me why this error is coming.
Edited by: 975976 on Apr 26, 2013 4:29 AM
Edited by: 975976 on Apr 26, 2013 4:48 AM

Problem running DAC Server as Service on Windows

I have used JavaService to setup the DAC server as a service on my Windows 2003 server. It seems to install and then start fine. The DAC client sees the server as running. But as soon as I try to execute an ETL the run fails immediately with " Unable to ping :'srn_integration_service', that being the name of my Informatica server as defined. I can then shutdown the service, start the server using the BAT file and the ETL runs as expected. I am creating the JavaService command line with the following BAT file which uses the same configuration as the startserver BAT file:
cd C:\OracleBi\DAC\bifoundation\dac
call config.bat
javaservice -install "DAC Server Service" "%JAVA_HOME%\jre\bin\client\jvm.dll" -Xms256m -Xmx1024m "-Djava.class.path=%DACCLASSPATH%" "-Duser.dir=%DAC_HOME%" -start com.siebel.etl.net.QServer -current "C:\OracleBI\DAC\bifoundation\dac" -description "Oracle BI DAC Server Service"
The DAC version from the console is "Dac Build AN 10.1.3.4.1.20090415.0146, Build date: April 15 2009"
I know people are doing this successfully so I am probably overlooking something simple (I'm a DAC novice.) Any ideas?

I create the service with this command:
javaservice -install "Oracle BI: DAC Service" "C:\Java\jdk1.5.0_18\jre\bin\client\jvm.dll" -Xms256m -Xmx1024m "-Djava.class.path=C:\OracleBI\DAC\lib\ojdbc14.jar;C:\OracleBI\DAC\DAWSystem.jar;C:\OracleBI\;C:\OracleBI\DAC\lib\ant-1.6.5.jar;C:\OracleBI\DAC\lib\antlr-2.7.6.jar;C:\OracleBI\DAC\lib\ant-antlr-1.6.5.jar;C:\OracleBI\DAC\lib\asm.jar;C:\OracleBI\DAC\lib\asm-attrs.jar;c3p0-0.9.0.jar;C:\OracleBI\DAC\lib\cglib-2.1.3.jar;C:\OracleBI\DAC\lib\checkstyle-all.jar;C:\OracleBI\DAC\lib\cleanimports;C:\OracleBI\DAC\lib\concurrent-1.3.2.jar;C:\OracleBI\DAC\lib\connector.jar;C:\OracleBI\DAC\lib\dom4j-1.6.1.jar;C:\OracleBI\DAC\lib\ehcache-1.2.3.jar;C:\OracleBI\DAC\lib\hibernate3.jar;C:\OracleBI\DAC\lib\jaas.jar;C:\OracleBI\DAC\lib\jacc-1_0-fr.jar;C:\OracleBI\DAC\lib\javassist.jar;C:\OracleBI\DAC\lib\jaxen-1.1-beta-7.jar;C:\OracleBI\DAC\lib\jboss-cache.jar;C:\OracleBI\DAC\lib\jboss-common.jar;C:\OracleBI\DAC\lib\jboss-jmx.jar;C:\OracleBI\DAC\lib\jboss-system.jar;C:\OracleBI\DAC\lib\jdbc2_0-stdext.jar;C:\OracleBI\DAC\lib\jgroups-2.2.8.jar;C:\OracleBI\DAC\lib\jta.jar;C:\OracleBI\DAC\lib\junit-3.8.1.jar;C:\OracleBI\DAC\lib\log4j-1.2.11.jar;C:\OracleBI\DAC\lib\proxool-0.8.3.jar;C:\OracleBI\DAC\lib\versioncheck.jar;C:\OracleBI\DAC\lib\xerces-2.6.2.jar;C:\OracleBI\DAC\lib\xml-apis.jar;C:\OracleBI\DAC\lib\jsr173_api.jar;C:\OracleBI\DAC\lib\sjsxp.jar" "-Duser.dir=C:\OracleBI\DAC" -start com.siebel.etl.net.QServer -description "Oracle BI DAC Server Service"
The only issue that I've encountered with this DAC Service is that Email Notification doesn't work.
Best regards

*DAC Server connection "Error - can't establish connection to DAW Server"

Hi there,
I'm experiencing trouble with the Oracle Data Warehouse Administration Console (DAC) server connection hanging in my Oracle BI Apps 7.9.6 install.
Architecture*
Applications Server - Machine A (Oracle Connection Services 10g R2 + Informatica 8.6.0 & HotFix 4.0 + DAC 10.1.3.4.1 services) = Linux RHEL 64-bit
Database Server - Machine B (Oracle BI Apps Data Warehouse OBAW + DAC Repository + Informatica Repository) = Linux RHEL 64-bit
Client - Machine C (BI Apps 7.9.6 + Informatica 8.6.0 & HotFix 4.0 client + DAC 10.1.3.4.1 client) = Windows x86 32-bit)
Issue*
After successfully following the Oracle Business Intelligence Applications Installation Guide for Informatica PowerCenter Users Version 7.9.6 (E14217-01) documentation I get to section 4.13 Configuring the DAC Server and I cannot create a successful connection to the DAC Server from the Data Warehouse Administration Console on my client machine.
I can confirm that I have started the DAC services on the Linux server with the . ./startserver.sh command. The icon on the Data Warehouse Administration Console turns Orange (Idle), but when I double click the icon a message box appears with the title "Server Log" but seems to hang.
If I stop the DAC services on the Linux server with the . ./stopserver.sh command the Server Log message box closes and a new message box appears stating:
*"Error: can't establish connection to DAW Server!"*
I have tried using the IP address and the actual server name as defined in the Hosts file as the DAC Server Host in the DAC System Properties but I receive the same error message.
I can also confirm that I ran the serverSetupPrompt.sh shell script successto configure the connection between the DAC Server and the DAC Repository.
Any suggestions or help greatly appreciated.
Kind Regards,
Gary.

Hi Gary,
If you have the Orange icon then your client is connected to the DAC server. (If it's red then it's not, and if it's green it's connected and an execution plan is running).
If you have never run any DAC jobs (and if you're just doing the installation then you won't have I guess) then your log will be blank and you'll just get a blank log window.
Have you got any evidence that your DAC server isn't running other than the Log won't download properly?
Obviously if you stop the DAC server then you're going to get an error that the client can't connect to the server :-D
If I were you I'd continue with the installation guide, as it sounds like things are working as they should.
BTW don't forget to mark this and other responses to your posts as helpful/correct as appropriate :)

DAC can't connect with INFORMATICA_DW_SERVER when dac server is running

Hello all,
We have something strange.
We just installed BIA 7.9.5.1 with informatica 8.1.1 sp5 on windows server 2003.
And confiugered it according to the manual.
Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
Now when we stop the dac server the connection to informatica_dw_server works just fine.
Also the connection with the informatica_rep_server works, also when the dac server is started.
What have we done so far:
- We can run pmcmd and pmrep from the command line
- We added the /server/bin and /client/bin directory to the path
- We added the system variable infa_domains_file
- We checked the config.bat file from the dac server
- We checked the port in the adminconsole (which is 4001)
- We restarted everything (all the services and the windows server as well)
- when we try netstat we see it is listening on port 4001
Proto Local Address Foreign Address State
TCP rst-act3ct2:4001 rst-act3ct2:0 LISTENING --> is this correct?
Hope anyone can help me out!!!!
Best regards,
Remc0 & Erik

user7316776 wrote:>
Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
Now when we stop the dac server the connection to informatica_dw_server works just fine.
Also the connection with the informatica_rep_server works, also when the dac server is started.
What have we done so far:
- We can run pmcmd and pmrep from the command line
- We added the /server/bin and /client/bin directory to the path
- We added the system variable infa_domains_file
- We checked the config.bat file from the dac server
- We checked the port in the adminconsole (which is 4001)
- We restarted everything (all the services and the windows server as well)
- when we try netstat we see it is listening on port 4001>
Hope anyone can help me out!!!!
Best regards,
Remc0 & Erik>i have similar problem. When i test connection to Integration Service it says 'please wait... ' 10-15 minuts and then I am getting error:
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Wed Mar 25 13:53:41 2009
The command: [pingserver] is deprecated. Please use the command [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [localhost:6001].
Completed at Wed Mar 25 13:54:21 2009
=====================================
ERROR OUTPUT
=====================================
When i test connect to Repository all right
Please!! Help me!!!!

Why would I get server cannot be contacted after a few hours of browsing?

I've had this problem since for several years, probably going back to v15 or so. Firefox loads and works fine for a while. Then, suddenly, for reasons I do not understand, it refuses to load any more webpages. I get a "server cannot be found" error. It's like Firefox forgets how to do an IP lookup, or gets a bogus answer that redirects to an IP that is bogus. It doesn't wait or timeout either. Once I get it once I cannot browse to any website until I close Firefox and reopen the program. Even opening new browser tabs or windows doesn't help. I have to completely exist Firefox (all instances).
I would like to note that if it is "about to break", when I click a link, bookmark, or type in the web address, when I hit enter it fails within a second or two. It doesn't sit around and timeout after 30 seconds.
I don't feel like I'm doing anything that is out of the ordinary. I have a few plugins, but this happens on multiple computers, including some that have no plugins disabled.
Here's things that may be affecting this behavior for me:
1. I use a hosts file to block a lot of spammy websites. I use a program called hostsman to handle the hosts file. I have the DNS service disabled because it cannot handle the number of entries that are in the hosts file. (been using this for more than 10 years)
2. I have disabled disk caching (I use an SSD and I have found that disk caching creates more problems for browsing than its worth). I still do the in-RAM caching, and it's not uncommon for Firefox to be using 1GB of RAM or so. I don't think I've ever seen it use more than about 1.2GB of RAM. All of the systems have massive amounts of free RAM. My main desktop has 64GB of RAM, with 75-80% of it free typically.
I've also seen this at different physical locations (home, work, other side of the country at friend's house's, etc.). This problem only affects Firefox. I haven't seen it on Chrome or Internet explorer (albeit I don't use them for hours on end). I typically have this issue a few times a day. I do work from home, and most of my work is in the browser, so it can be a bit annoying.
Right now my hardware on this machine is:
Lenovo Y55 with 16GB of RAM, i7-4700HQ and 512GB SSD. Other systems are far more powerful than this one, so I tend to think that hardware is not the problem.
Thanks.

I don't have an answer for you, but we did receive some reports of this after the release of Firefox 36. One Firefox 36 user also believed that Firefox had stopped sending DNS requests, which is a prerequisite to being able to connect to the web server. Perhaps it became more frequent for you as well, since otherwise, you probably would have posted this a few years ago...
I don't recall that we identified the source of the problem, but in many cases, it was "something" in the settings folder.
Along those lines, could you conduct this test:
'''Create a new Firefox profile'''
''This is in addition to and does not replace your existing settings.''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run) -- type or paste the following and press Enter:
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like April7, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
It might take a while to determine whether the new profile is works better than your old one. If you want to import your bookmarks from your regular profile during that time, here's how:
You can use the Library dialog (Ctrl+Shift+b or "Show All Bookmarks") to access the Restore feature. The trick is knowing where to find your bookmark backups in your regular profile. After clicking Choose File... you can paste this into the file name space and press Enter to drill down to your profile folders:
%APPDATA%\Mozilla\Firefox\Profiles
The semi-randomly-named folder that has your last backup is usually the one ending with "default". Click into that one, then into the '''bookmarkbackups''' folder. Here you can pick the most recently updated file to restore.
Important: restoring a bookmark backup wipes any bookmarks currently in your active Firefox profile and replaces it with the contents of the backup file.
I think it's also reasonable to install AdBlock Plus, LastPass and SQLite Manager, as those, by themselves, are unlikely to be the source of this seemingly rare problem. But I wouldn't add all your extensions at once to the new profile.

Safari cannot open the page because the server cannot be found

Trying to open Outlook Webmail App from Ipad 2 and am receiving the Error Message "Safari cannot open the page because the server cannot be found.
I have tried resetting my ipad 2 to no avail. Internet connection is working and am able to get into other apps/sites. Read older posting that this could be a DNS issues???
Help?

The only other thing I can think of is to try a device reset (be sure and also close off all running apps beforehand):
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Error while starting DAC Server on Linux (32 bit)

Dear Friends,
I installed Informatica Powercenter 8.6.1 on Linux (32 bit) with 11g database mapping
and I installaed DAC Server on the same server
I could start the Informatica services successfully
but when i try to start the DAC Server it throws the following error:
#./startserver.sh
OS detected: Linux
Dec 23, 2010 5:49:33 AM com.siebel.etl.engine.core.ETLUtils logException
SEVERE:
ANOMALY INFO:::
An exception occurred. Shutting down server...
EXCEPTION CLASS::: java.lang.ExceptionInInitializerError
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::Application Manager Failed Initialization
EXCEPTION CLASS::: com.siebel.etl.bootup.ApplicationManagerInitializationException
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:157)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::/oba/BI/DAC/bifoundation/dac/conf/server.properties (No such file or directory)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:151)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
Dec 23, 2010 5:49:33 AM com.siebel.etl.net.QServer <init>
SEVERE:
Shutting down server...
what could be the Issue.
Regards,
DB

Listen Sheikh Abdullah, if u don't need remote access to that server over secure conn., don't use password file authentification but change REMOTE_LOGIN_PASSWORDFILE to NONE and when u conn thru OEM as sysdba try to change his pass and then try conn thru command promt(CP) usin that new pass.
Or recreate pass file adding new pass in it, set REMOTE_LOGIN_PASSWORDFILE to exclusive or shared and conn thru CP using password file pass.
Try this possible solutions in order u wish.

Why am I getting ExchangeWebServices Inbox Error: Error, ErrorServerBusy. The server cannot service this request right now. Try again later

I recently switched my application that uses EWS from an on-premise Exchange Server to Exchage Online through Office356.
The process worked just fine for several days, then I started getting the following errors;
Error accessing [USERNAME] email account.; ExchangeWebServices Inbox Error: Error, ErrorServerBusy, The server cannot service this request right now. Try again later. -->
This has been happening for the past 14 hours now.
I contacted my Office365 support team and they acted like they had never heard of the Exchange Web Services API, so no help there.
I can access the mailbox using the O365 web portal and I can access the mailbox account using the Outlook 2013 desktop client. The issue seems specific to EWS
My program is a Windows service, written in VB.Net. It connects to EWS, goes to the user account inbox, iterates through the inbox extracting attachments from messages, then moves the messages to a saved folder below the inbox.
I created the wrapper for EWS that I can reference in my project code using the following, run from an elevated VS2012 command prompt;
wsdl.exe /namespace:ExchangeWebServices /out:EWS.cs https://outlook.office365.com/ews/services.wsdl /username:[email protected] /password:p@ssw0rd
csc /out:EWS_E2K13_release /target:library EWS.cs
I bind to EWS in my class, using the following code;
Imports System.Net
Imports ExchangeWebServices
Public Class Exchange2013WebServiceClass
Private ExchangeBinding As New ExchangeServiceBinding
Public Sub New(ByVal userEmail As String, ByVal userPassword As String, ByVal URL As String)
ExchangeBinding.Credentials = New NetworkCredential(userEmail, userPassword)
ExchangeBinding.Url = URL
End Sub
The error that is logged gets triggered when my code makes a call to the following method;
Public Function GetInboxMessageIDs() As ArrayOfRealItemsType
Dim returnInboxMessageIds As ArrayOfRealItemsType = Nothing
Dim errMsg As String = String.Empty
'Create the request and specify the travesal type.
Dim FindItemRequest As FindItemType
FindItemRequest = New FindItemType
FindItemRequest.Traversal = ItemQueryTraversalType.Shallow
'Define which item properties are returned in the response.
Dim ItemProperties As ItemResponseShapeType
ItemProperties = New ItemResponseShapeType
ItemProperties.BaseShape = DefaultShapeNamesType.IdOnly
'Add properties shape to the request.
FindItemRequest.ItemShape = ItemProperties
'Identify which folders to search to find items.
Dim FolderIDArray(0) As DistinguishedFolderIdType
FolderIDArray(0) = New DistinguishedFolderIdType
FolderIDArray(0).Id = DistinguishedFolderIdNameType.inbox
'Add folders to the request.
FindItemRequest.ParentFolderIds = FolderIDArray
Try
'Send the request and get the response.
Dim FindItemResponse As FindItemResponseType
FindItemResponse = ExchangeBinding.FindItem(FindItemRequest)
'Get the response messages.
Dim ResponseMessage As ResponseMessageType()
ResponseMessage = FindItemResponse.ResponseMessages.Items
Dim FindItemResponseMessage As FindItemResponseMessageType
If ResponseMessage(0).ResponseClass = ResponseClassType.Success Then
FindItemResponseMessage = ResponseMessage(0)
returnInboxMessageIds = FindItemResponseMessage.RootFolder.Item
Else
'' Server error
Dim responseClassStr As String = [Enum].GetName(GetType(ExchangeWebServices.ResponseClassType), ResponseMessage(0).ResponseClass).ToString
Dim responseCodeStr As String = [Enum].GetName(GetType(ExchangeWebServices.ResponseCodeType), ResponseMessage(0).ResponseCode).ToString
Dim messageTextStr As String = ResponseMessage(0).MessageText.ToString
Dim thisErrMsg As String = String.Format("ExchangeWebServices Inbox Error: {0}, {1}, {2}", responseClassStr, responseCodeStr, messageTextStr)
errMsg = If(errMsg.Equals(String.Empty), String.Empty, errMsg & "; ") & thisErrMsg
End If
Catch ex As Exception
'errMsg = String.Join("; ", errMsg, ex.Message)
errMsg = If(errMsg.Equals(String.Empty), String.Empty, errMsg & "; ") & ex.Message
End Try
If Not errMsg.Equals(String.Empty) Then
returnInboxMessageIds = Nothing
Throw New System.Exception(errMsg)
End If
Return returnInboxMessageIds
End Function
Since the code worked just fine for several days and then suddenly stopped working with a server busy error, I have to think that this is some type of limit or throttling by EWS on the account. I process several thousand emails per day, in chunks of 300
at a time.
But I have no idea how to check for any limits exceeded. I am nowhere close to my O365 mailbox size limit. Right now, there are over 4,000 messages in my inbox, and growing.
Thanks in advance for any ideas you can offer.
Dave

All the API's EWS, MAPI, ActiveSync,Remote powershell are throttled on Office365 (based around what 1 particular user could resonably do). If you have had a read of this already i would recommend
http://msdn.microsoft.com/en-us/library/office/jj945066(v=exchg.150).aspx
You can't adjust or even find your current throttle usage so you have to try to design your code around living inside the default limits. If your using One Service Account to access multiple Mailboxes (or if that account is because used across multiple
applications) that can cause problems. In this case using EWS Impersonation is good solution as described in
http://blogs.msdn.com/b/exchangedev/archive/2012/04/19/more-throttling-changes-for-exchange-online.aspx (this basically means the Target Mailbox is charged instead of the Service Account).
Looking at the code one thing I notice missing is your don't appear to be paging the results of FindItems, also have versioned your requests to Exchagne2013. eg ". When the value of the
RequestServerVersion element indicates Exchange 2010 or an earlier version of Exchange, the server sends a failure response with error code
ErrorServerBusy. If the value of the RequestServerVersion
element indicates a version of Exchange starting with Exchange 2010 SP1
or Exchange Online, and the client is using paging, EWS may return a
partial result set instead of an error"
To Page FindItems Correctly you should use the IndexedPageViewType class and page the Items at no more the 1000 at a time eg something like
IndexedPageViewType indexedPageView = new IndexedPageViewType();
indexedPageView.BasePoint = IndexBasePointType.Beginning;
indexedPageView.Offset = 0;
indexedPageView.MaxEntriesReturned = 1000;
indexedPageView.MaxEntriesReturnedSpecified = true;
FindItemType findItemrequest = new FindItemType();
findItemrequest.Item = indexedPageView;
findItemrequest.ItemShape = new ItemResponseShapeType();
findItemrequest.ItemShape.BaseShape = DefaultShapeNamesType.IdOnly;
BasePathToElementType[] beAdditionproperties = new BasePathToElementType[3];
PathToUnindexedFieldType SubjectField = new PathToUnindexedFieldType();
SubjectField.FieldURI = UnindexedFieldURIType.itemSubject;
beAdditionproperties[0] = SubjectField;
PathToUnindexedFieldType RcvdTime = new PathToUnindexedFieldType();
RcvdTime.FieldURI = UnindexedFieldURIType.itemDateTimeReceived;
beAdditionproperties[1] = RcvdTime;
PathToUnindexedFieldType ReadStatus = new PathToUnindexedFieldType();
ReadStatus.FieldURI = UnindexedFieldURIType.messageIsRead;
beAdditionproperties[2] = ReadStatus;
findItemrequest.ItemShape.AdditionalProperties = beAdditionproperties;
DistinguishedFolderIdType[] faFolderIDArray = new DistinguishedFolderIdType[1];
faFolderIDArray[0] = new DistinguishedFolderIdType();
faFolderIDArray[0].Mailbox = new EmailAddressType();
faFolderIDArray[0].Mailbox.EmailAddress = "[email protected]";
faFolderIDArray[0].Id = DistinguishedFolderIdNameType.inbox;
bool moreAvailible = false;
findItemrequest.ParentFolderIds = faFolderIDArray;
int loopCount = 0;
do
FindItemResponseType frFindItemResponse = esb.FindItem(findItemrequest);
if (frFindItemResponse.ResponseMessages.Items[0].ResponseClass == ResponseClassType.Success)
foreach (FindItemResponseMessageType firmtMessage in frFindItemResponse.ResponseMessages.Items)
Console.WriteLine("Number of Items retreived : " + ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items.Length);
if (firmtMessage.RootFolder.IncludesLastItemInRange == false)
moreAvailible = true;
else
moreAvailible = false;
((IndexedPageViewType)findItemrequest.Item).Offset += ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items.Length;
Console.WriteLine("Offset : " + ((IndexedPageViewType)findItemrequest.Item).Offset);
if (firmtMessage.RootFolder.TotalItemsInView > 0)
foreach (ItemType miMailboxItem in ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items)
Console.WriteLine(miMailboxItem.Subject);
else
throw new Exception("error " + frFindItemResponse.ResponseMessages.Items[0].MessageText);
} while (moreAvailible);
The support people should be able to help you as long as you can get past the first level. The EWS Managed API has a RequestId header that gets submitted with requests
http://blogs.msdn.com/b/exchangedev/archive/2012/06/18/exchange-web-services-managed-api-1-2-1-now-released.aspx . In theory they should be able to take this and then from the Logs tell more information about why your request failed etc.
Cheers
Glen

[BIApps7.9.6.4Upgrad]DAC Server cannot shutdown

Similar Messages

Maybe you are looking for