BICC Dashboards - Any examples to share?

A frequent request I get when conducting BI Strategy workshops is a good example of a BICC Dashboard.
I'm looking to gather some feedback.
I will dedicate a future blog to BICC metrics and sample dashboards.
I do have a sample BICC Scorecard, thanks to my colleague Timo Elliott! I'll include that in my upcoming blog as well.
Below are some of the key metrics and areas I typically advocate:
(Note that these do not cover actual report/dashboard/analytics development time)
1. Delivered Return
Pipeline: # projects new/started/completed, Net ROI planned/achieved, projects delivered on-time/past due
Costs: Controllable and non-controllable costs
Usage: Usage by subject area and business unit
Quality: Delivered quality percent, # reloads, avg. response time, # subject load failures
2. Operational Performance
Uptime: system availability, subject area availability, infrastructure availabiity
Load time: source availability, subject load time
Outage: # source system failures, planned/unplanned infrastructure outages, subject and busines unit outages
Support: # support cases raised/pending/closed
Education: New courses offered, # courses taken, FTEs trained, Support FTEs trained, Usage following training
Are the other key metrics you track?
Any sample dashboards you can share?
You can post here or email to me - contacts are on the SCN profle.
If you forward dashboards via email, please Indicate if they are to be shared or not.
Thanks!
Message was edited by: Tammy Powlas - removed e-mail address per SCN rules of engagement.

This one may helpful:
http://www.hitachiconsulting.com/files/pdfRepository/WP_EstablishingBICC_SimsGlover_FINAL_0909.pdf

Similar Messages

What is the best way to arrange Videos on a Page? Do you have any examples?

I'm trying to design an iWeb page strictly for [YouTube] videos and am still perplexed with what the best arrangement is. See my video page here: http://servalonline.com/Serval_Online/Video.html. As you can see, IT *****! Do you have any examples on your site? i.e. a page with videos, that you can share with me? Thanks.

Chuka wrote:
Do you have any examples on your site? i.e. a page with videos, that you can share with me?
They're obviously not my sites, but perhaps they'll give you some layout ideas:
http://www.bbc.co.uk/news/videoandaudio
http://www.ted.com/talks
http://devour.com

DD got new laptop(Windows 8). I would like for her to have her own iTunes account. However she has been syncing her iPod to my account for 2years and has an abundance of music/movies that we don't want to buy again. Any way to share them to her new PC?

My daughter got a new laptop for Christmas (windows 8). I would like to set up her own iTunes account on her laptop. Our dilema is she has been syncing her iPod to my account for 2 years now, therefore, she has an abundance of music (purchased through iTunes store) and movies (downloaded via digital download from DVD/BluRay purchases) that we don't want to have to purchase all over again. Is there any way to share some/all of my account with her so she can sync her iPod to her laptop in the future?
I have been reading about Home Sharing but I am not sure this is the approach I am after. Will home sharing work to allow her to alter and change the content on her PC without changing/altering it on mine? Will it allow her to sync her iPod with her PC?
I suppose I should also add that we are currently running 2 iPod touches, 2 iPads and an iPhone from my apple ID. I am not even sure if I would be able to add her PC as a device for home sharing if that is an option for us.
Any and all guidance is greatly appreciated.
~Mom with too many devices

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Is there any way to share my Mac's internet connection with my iPod as I can't turn on the wifi on my iPod?!

When I restored and updated to IOS 6.1.3, my wifi on my iPod Touch 4th Gen greyed out and I can no longer use it.
Is there any way to share the connection of my mac using the USB cable or Bluetooth?
Thanks,
James

JamesUpjohn wrote:
We have contacted Apple and haven't heard back for 3 months
How did you try to contact them? In any case, an Apple Store is the best way to handle any problems with an iPhone when you have a store in your area. The Apple Store will certainly be able to handle the problem one way or another. Most likely they'll just replace the iPhone, though if you're out of warranty the replacement will not be free.
Regards.

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

Req any examples of high to use midi controller/keyboards with Labview TIA

Req any examples of high to use midi controller/keyboards with Labview TIA

[email protected];
Check the following:
Communicating with a Windows MIDI Device in LabVIEW
Regards;
Enrique
www.vartortech.com

In Data Quality transform please explain Associate transform with the help of any example.

In Data Quality transform please explain Associate transform with the help of any example.

Hi Neha,
If we are using multiple match transforms and consolidate the final output we will use associate transform .
Let me explain with one example based on data quality blue prints for USA .
We have customer/vendor data .     We need to find the duplicates .
1. First we will find the duplicates on   Name and Address
2. Second we will find the duplicates on Name and Email
3. Third we will find the duplicates on Name and Phone
Here why we need to find the duplicates in multiple stages . If we are finding the duplicates on combination of Name, Address, Email and Phone we may not get proper duplicates   as we are finding the potential duplicates . That's why we are finding the duplicates on different combinations .
In this case we will get the different group numbers for each match combination . Each combination name is there .
We want to consolidate and give the group number to the whole set of duplicates . We will pass these 3 match groups to associative transform and generate the consolidated match group for the input data.
I hope you understand the concept .
Thanks & Regards,
Ramana.

Oracle ADF RichSelenium class - any examples on how to use this?

Digging around the net and found that there is a class for Selenium testing ADF Rich components, namely oracle.adf.view.rich.automation.selenium.RichSelenium located in oracle_common\modules\oracle.adf.view_11.1.1\adf-richclient-automation-11.jar.
I've been searching for half a day now and cannot find any example code on how to use RichSelenium class for the life of me.
There are examples of using Selenium with ADF (http://www.oracle.com/technetwork/articles/adf/part6-094560.html) but not using RichSelenium.
Any lead or information would be highly appreciated, thanks in advance.

OK figured out how to start using this RichSelenium class and thought I'd post my findings on this thread for the sake of anyone else who wants to know. Here's my code:
-- START OF CODE
package my.richselenium.test;
import java.util.concurrent.TimeUnit;
import org.junit.After;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.WebDriverCommandProcessor;
import org.openqa.selenium.firefox.FirefoxDriver;
* Base test class for handling common functionality across tests - setting up web driver, retrieving URL and cleaning
* up and resources.
public class myTest {
public void runTest() {
// Create WebDriver
WebDriver myWebDriver = new FirefoxDriver();
// Setup Web Driver Command Processor
WebDriverCommandProcessor wdcp = new WebDriverCommandProcessor("http://www.google.com", this.driver);
// Instantiate RichSelenium class object
RichSelenium rs = new RichSelenium(wdcp);
// Load specific URL
rs.open("http://www.oracle.com");
// Let's do some RichSelenium specific processing
String [] someArray = rs.getAllFields();
List<String> someList = Arrays.asList(someArray);
// for loop advance
for (String temp : someList ) {
System.out.println(temp);
rs.close();
-- END OF CODE
-----------------------------------------------------------------------------------------------------------------------------------------

Any examples about implementing dbms_cdc utility in oracle 10g db

Hello,
Can any one please share me any exmples how to set up asynchronous hot log cdc to find the changes in the data in oracle 10g database.
I don't have ODI or OWB.
Please advice.

Hi ,
Could you check this document http://antapex.org/cdc.xls
thanks,
CHB

Can we call functional module in a subroutine? Any example?

Can we call functional module in a subroutine? Any example?

sample code....
REPORT ZPL_BDC_PA30.
TABLES : PA0022.
DATA : V_PERNR LIKE PA0022-PERNR,
       V_SLABS LIKE PA0022-SLABS.
DATA : FILENAME TYPE STRING.
DATA : BEGIN OF IT_DATA OCCURS 0,
         PERNR LIKE PA0022-PERNR,       "Personnel Number
         SLABS LIKE PA0022-SLABS,       "Certificate code
         SLABS1 LIKE PA0022-SLABS,      "Certificate code new
       END OF IT_DATA.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 1 WITH HEADER LINE.
DATA : BEGIN OF IT_ERROR OCCURS 0,
         POS LIKE SY-TABIX,
         TEXT(40),
       END OF IT_ERROR.
PARAMETERS : P_FNAME TYPE DXFIELDS-LONGPATH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
I_LOCATION_FLAG       = ' '
I_SERVER              = '?'
I_PATH                = I_PATH
FILEMASK              = '.'
FILEOPERATION         = 'R'
   IMPORTING
O_LOCATION_FLAG       = O_LOCATION_FLAG
O_SERVER              = O_SERVER
     O_PATH                = P_FNAME
ABEND_FLAG            = ABEND_FLAG
   EXCEPTIONS
     RFC_ERROR             = 1
     ERROR_WITH_GUI        = 2
     OTHERS                = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
FILENAME = P_FNAME.
PERFORM UPLOAD.            "Uploading inputfile to internal table.
PERFORM VALIDATE.          "validating the values
PERFORM POPULATE_BDC.      "Populating bdc internal table
PERFORM ERROR_RECORDS
        TABLES IT_ERROR.     "Error records
*&      Form bdc_fdata
FORM BDC_FDATA USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.                    " bdc_fdata
*&      Form bdc_hdata
FORM BDC_HDATA USING PROGRAM SCRNO DYNBEGIN.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = SCRNO.
IT_BDCDATA-DYNBEGIN = DYNBEGIN.
APPEND IT_BDCDATA.
ENDFORM.                    " bdc_hdata
*&      Form upload
FORM UPLOAD .
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = FILENAME
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            = VIRUS_SCAN_PROFILE
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    = FILELENGTH
HEADER                        = HEADER
    TABLES
      DATA_TAB                      = IT_DATA
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF SY-SUBRC <> 0.
    MESSAGE I000(BCTRAIN) WITH 'FILE NOT UPLOADED'.
ELSE.
   MESSAGE I000(BCTRAIN) WITH 'FILE UPLOADED'.
ENDIF.
ENDFORM.                    " upload
*&      Form populate_bdc
FORM POPULATE_BDC .
LOOP AT IT_DATA .
    PERFORM BDC_HDATA USING 'SAPMP50A'
                                '1000'
                                'X'.
    PERFORM BDC_FDATA USING 'RP50G-PERNR'
                             IT_DATA-PERNR.
    PERFORM BDC_FDATA USING 'RP50G-CHOIC'
                             '0022'.
    PERFORM BDC_FDATA USING 'BDC_OKCODE'
                             '=MOD'.
    PERFORM BDC_HDATA USING 'MP002200'
                                 '2000'
                                 'X'.
    PERFORM BDC_FDATA USING 'P0022-SLABS'
                             IT_DATA-SLABS1.
    PERFORM BDC_FDATA USING 'BDC_OKCODE'
                             '=UPD'.
    CALL TRANSACTION 'PA30' USING IT_BDCDATA.
    REFRESH IT_BDCDATA.
ENDLOOP.
ENDFORM.                    " populate_bdc
*&      Form validate
FORM VALIDATE .
    data : num like sy-tabix,
           num1 like sy-tabix.
LOOP AT IT_DATA.
   num = num + 1.
num1 = sy-tabix.
    SELECT PERNR
         FROM PA0022
         INTO V_PERNR WHERE
         PERNR EQ IT_DATA-PERNR.
    ENDSELECT.
    IF SY-SUBRC <> 0.
      MOVE num TO IT_ERROR-POS.
      MOVE 'Invalid Pernr' TO IT_ERROR-TEXT.
      APPEND IT_ERROR.
      DELETE IT_DATA .
    ELSE.
      IF IT_DATA-SLABS IS INITIAL.
        MOVE num TO IT_ERROR-POS.
        MOVE 'Certificate code is initial' TO IT_ERROR-TEXT.
        APPEND IT_ERROR.
        DELETE IT_DATA.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                    " validate
*&      Form error_records
FORM ERROR_RECORDS TABLES IT_ERRORS.
FORMAT COLOR COL_GROUP.
WRITE : / 'Error in the following records : ' .
FORMAT COLOR COL_NEGATIVE.
LOOP AT IT_ERROR.
    WRITE : / IT_ERROR-POS,
               IT_ERROR-TEXT.
ENDLOOP.
ENDFORM.                    " error_records

Is there any example snippet for XPath using namespace

Hi,
I have used XpathApi class to get the XML node matching my xpath that does not deal with namespaces and it works for me. However, it does not seem to work well when I construct the xpath with namespaces (probably I may be doing something wrong example: //ns:node1/@ns:attr1).
Can anyone give pointers or some example snippet or some links to handle Xpath with namespaces.
Also if there is any better approach (Classes or framework) for handing XPath with namespaces then please let me know.
Thanks,
-vc

AnkitG wrote:
Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

How to add a multiple roadmap step?Any examples!!!

Hi All,
I am using a multistep roadmap within a roadmap ui.It has basically 2 steps assigned to it.I have created 2 context attributes under context node and assigned the datasource property of multistep to it.But i am still unable to see the 2 steps within the multistep element.Any idea of how to do it?Any examples of how to use multi step roadmap.
Thanks
Aravind

Hi Armin,
Thanks for your input.My problem is i am unable to see the multiple road map step at all.
This is what i have now.
1.Roadmap ui
1a.single roadmapstep1
1b.single roadmapstep2
1c.single roadmapstep3
1d.single roadmapstep4
1e.single roadmapstep5
1f.multiple roadmapstep6
i am not seeing the 1f multiple road map step at all.I have binded the datasource of it to context node of cardinality 0..n and it has 2 context attributes of type string assigned to it.
Please correct me if i am wrong or missing something

Any example of FOR UPDATE iterator interface?

Hi,
did play somebody with iterator with ForUpdate interface? I really appreciate any example of that. I am sorry, I did not find anything in documentation, just definition of interface in reference.
Radek
null

Oracle SQLJ currently does not support the ForUpdate functionality - that's why you did not see any further mention in the documentation.
Though you can define iterators that implement the ForUpdate interface and write UPDATE/DELETE statements (UPDATE ... WHERE CURRENT OF :forUpdateIterator), you will receive an error during the profile customization that positioned updates are not supported.
In Oracle the workaround is to also select out a ROWID column in queries for update and then use WHERE rowid = :(iter.rowid()) instead of WHERE CURRENT OF :iter.
(One of these days, when SQLJ supports WHERE CURRENT OF, this would actually be what we'd do in an implementation of this feature.)

Any example for ENQUEUE_ARRAY for JMS compatible messages?

Is there any examples of using ENQUEUE_ARRAY with messages that are compatible with JMS? either a VARRAY or NESTED TABLE of JMS content?
I have an after insert trigger that propagates to JMS and in the for each row loop I'd much rather enqueue as a batch than for each individual message.
It's hard enough getting JMS compatible content working where you are enqueuing just a single message but just what's involved to get this working with batches of JMS compatible messages?

Hi prajithparan,
Thanks for the response. I already looked at the link and a few other links in this forum that are related to array inserts/updates. However, I could not find answers to my specific questions. I am specifically concerned with the setup of parameters to the API calls (OCIBindByName and OCIBindArrayOfStruct) that fully reflects the two-dimensional nature of the array of structs that I am trying to insert.
Moreover, I need to set the data type of the columns to be inserted as SQLT_STR. I think this data type requires the programmer to supply the length of the null terminated C strings as well. If we are inserting just one column, we can provide the length of each of the strings to be inserted into a VARCHAR2 column as part of a OCIBind call, for each of those columns.
Since in an array insert, we are supplying multiple rows at the same time, how do we supply the lengths of strings to be inserted ? Should it be some form of two-dimensional array ?
I could not get clear answers to these questions from either the Oracle documentation or the links on this forum. May be the answers are there and I am just missing them ?

Any example code for WVD spectrogram in labview ?

I heve been trying to implement the WVD spectrogram in my vi with no luck. Can't find any examples on how to do it.

Look at the Functions palette >> Analyze >> Signal Processing >> Frequency Domain >> WVD Spectrogram.vi.
This is in LV 7.1.1 Full.
The WVD uses a different kernel than the Fourier transform and works well with rapidly changing signals. The major disadvantage is the large amount of spurious signal that appears in the spectrogram.
Lynn

BICC Dashboards - Any examples to share?

Similar Messages

Maybe you are looking for