BICS Conection problem with prompts

Hi, All.
I have one problem with prompts in Webi 4.0. I build BEx query on the Infoset, create OLAP Connection in IDT. And then I try build webi reports appear one problem, I try create prompt on key field, but I cannot do this. Earlier, then I do report on universe I can do this. Can anybody give me advise by this problem?
Regard.
Fanil

Hi Jothi.
I agree with you but Bex do not allow you to have a restiction to certain values and then a variable on top of that. I have to build the filter in the Webi report and I cannot build it on the description. I have to build it on the key.
Koos.

Similar Messages

Problem with prompt for default in WEBI!

Hello friends
I am new to BO and Webi And I have a problem with a report. It happens that I have created a query in SAP (with Query Designer) and I created the Universe (with Universe Designer). The query gets a cost center to filter the data, but when I run the report in InfoView I asked the cost center, it comes with a default. Is it a property that can be turned off in Webi or elsewhere?
I would be grateful if I can help.
Regards

Is in the BEx query any default value selected for the cost centre?
Could you please mention here the where clause of the filter object for Cost Center in the universe ?

Strange problem with prompts

Hi,
I'm having a strange problem occuring in a prompt. The design is this: I have a "search" dashboard page that let's a user search for specific projects (project is a dimension) using a wide variety of multi-select boxes, dropdowns, etc. Once a user chooses these and hits "go", an answers query is run which shows Project IDs and other fields that relate to the prompts chosen.
On the answers query, the "Project ID" column is set to navigate to a 2nd page. On this second page, I have a dropdown prompt for project ID plus time periods. The time periods dropdown is constrained on the project ID (but note that the project ID prompt is NOT constrained). After the time period is selected and user hits GO on the 2nd page, a BI Publisher result is run (using presentation variables that are set on the 2nd page prompts). Note that I need to have a prompt on the 2nd page in order to allow presentation variables to be set (these set the parameters used by BIP to the selected prompt values)
This works most of the time. But for some reason, when I get to the 2nd page, there are a few projects that, when I go to pick a time period for, the PROJECT_ID dropdown gets reset back to the first available project ID. This happens even before I hit the "go" button. It's kinda like the project ID is set to "constrainted" - but it isn't. i.e. when the 2nd page comes up, the project ID dropdown will show the project ID that I clicked on in the "search" page. But then if I go to pick the fiscal month using the other field in the prompt, my Project ID gets reset from the one they chose, to the very first project ID available.
I'm unable to figure out why this is occurring, and why it's intermittent. Some project IDs consistenly have this problem, others do not.
Any ideas?
Thanks,
Scott

Hi
i have five prompts together out of which two are year prompts and others are country ->Region->city and if i am now wrong and as per sql query if we are selecting the constrain option for region and city then in sql query it will take year prompts value in where clause as well... and as those two year prompts has different value
If year has same value then there is no problem as here year has two different values
the sql query which is getting generated is like this .... the problem is the way year is taking values in where clause
select region from region_table, time_dim where region_table.time_id = time_dim.time_id and year ='2008' and year='2009'Any suggestion would be appreciated
thanks & regards
Edited by: user12035784 on 13-Aug-2010 03:45
Edited by: user12035784 on 13-Aug-2010 03:58

Problem with date format when ask prompt web-intelligence

Bo XIR2 with 5 SP. Instaled on Windows 2003 with support Russian.
Inside BO every labels, buttons - use russian. But when invoke web-report and Prompt appear there is problem with date format.
Looks like korean format of date 'jj.nn.aaa H:mm:ss'. I see system settings of date in Win .. everything right
What i have to do?
Where i can change format date for bo?

GK, try this...
decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT6065 I installed this update. I have never had problems with "multiple prompts to unlock "Local items" keychain" until after I installed this update. Now, I can't get it to STOP prompting me.

So how do I fix this? How do I get this to go away? It's prompting me for a password that I haven't ever set up!

I have the same problem with three pop-up prompts:
(1) com.apple.iCloudHelper wants to use the "login" keychain. Please enter the keychain password.
(2) CalendarAgent wants to use the "login" keychain. Please enter the keychain password.
(3) AddressBookSourceSync wants to use the "login" keychain. Please enter the keychain password.
I can enter my login password and the prompt goes away for a little while, but eventually returns. Or I can click on "Cancel" many multiple times and it goes away for a little while, but returns again.
I want a solution too and hope this additional information will help.

Problem with passing dashboard prompts

Hi All,
I have a problem with passing dashboard prompts.
Scenario:
I have a report with country(column interaction),amount sold and two prompts.when the user selects the particular country, i need to navigate to other detailed dasboard with 2 prompts and country.
with the column interaction, am able to navigate to other dashboard with all the prompts only when the target dashboard prompts, defaults to presentation variable.
but when the user directly opens the target dashboard, i have to display the report with the default values which am not able to achieve.
All the prompts are customized prompts.
Any suggestions would be greatly helpful.
Thnx in Advance

Hi,
When you drill down, corresponding filter values get added to your report. So next time when you change the prompt values It does not give you proper data.
So before you change the prompt values, you comeback to the default report. and try changing the prompt values.
Otherwise you can do one thing, Do not enable drill in place for the report section. So when you try to drill down in the report, it takes you to the new page.
And in the main page even if you change prompt values, It will work perfectly.
Regards,
TKB

Problems conecting java with mysql

Hi, im workin' with mysql-connector-java-3.1.12 and it work on debug runtime but not when i access the .jar of the project.
the code of conection is:
try
Class.forName("com.mysql.jdbc.Driver").newInstance();
con = DriverManager.getConnection(url,login,password);
con.setAutoCommit(false);
catch (Exception e)
JOptionPane.showMessageDialog(null,"error en " + e.getMessage());
there is no problems with code, it works!!, but i don't know what to do about of conection in the .jar
I apreciate some help with this, Thankkkssss!!!

Hi, im workin' with mysql-connector-java-3.1.12 and
it work on debug runtime but not when i access the
.jar of the project.Huh?
the code of conection is:
try
lass.forName("com.mysql.jdbc.Driver").newInstance();
con =
DriverManager.getConnection(url,login,password);
con.setAutoCommit(false);This is probably wrong. Unnecessary in this case - you aren't doing any writes.
catch (Exception e)
OptionPane.showMessageDialog(null,"error en " +
e.getMessage());This is foolish code. You don't need Swing or a dialog box. You're printing less information than is available. Better to print the entire stack trace.
is no problems with code, it works!!, Plenty of problems, really, regardless of whether it "works".
You don't post your URL. That would help.
but i don't
know what to do about of conection in the .jar
I apreciate some help with this, Thankkkssss!!!Put in the CLASSPATH, of course. NOT a system environment variable, either. javac.exe and java.exe ignore it. Use the -classpath option.
%

Problem with dashboard prompt initial value (OBIEE 11g)

Hi alli,
I have a problem with dashboard prompt and session variable in OBIEE 11g.
I have declared a session non-system variable which I set/change with dashboard prompt. At login the variable is initialized in initialization block that gets a value from an SQL select statement.
When I change the value in prompt, the session variable changes accordingly, as it should (change is made by calling function NQSSetSessionValue() within javascript function). While I am in my dashboard, cruising around pages the variable stays the same, and when I return to the page that has prompt on it, the correct value is shown. Everything works fine.
The problem occures when I go to Catalog (in presentation services) to create some new Answers. When I return back to the same page in dashboard (which has a prompt), the prompt selected value and session variable are set back to the default value. It looks like the initialization block is executed again.
My prompt is configured like this:
- Choice List Values: SQL Results
- Default selection: Variable Expression (@{biServer.variables['NQ_SESSION.VariableName']} )
- Set a variable: Presentation Variable
Is there a way to stop the initialization block from executing again? Isn't it logical that the initialization block executes only at login, when the session variable is empty? I don't need it to execute every time i come to the dashboard.
Thanks in advance,
Marko
Edited by: markor on 14.3.2011 8:58

How and where do you use the nqssetvalue() function.
I tried it in several places but it doesn't work.
Can you help me, please!
Thanks

Problem with SPROXY - rep SPROX_CHECK_HTTP_COMMUNICATION prompts for Login

We get following errors in SPROXY
No connection to Integration Builder (only local data visible)
Message no. SPRX081
Diagnosis
The connection to the Integration Builder server is not functioning. The system can only display information for proxies that already exist in the local system.
You cannot create or change proxies under these conditions, because the system needs to be able to read an interface description from the Integration Repository
We have run SPROX_CHECK_IFR_RESPONSE report to check it and we do get a login prompt popup which I belive is incorrect. This would indicate a problem with a user (e.g you get the same promt when you get a failure in SM59 when testing HTTP connection with incorrect user details)
I have tested all XI users and they are not locked.
Can you help me to pinpoint the problem

Hi all,
Guru, user double, tripled checked, no information seems to be wrong.
Nilesh, SLDCHEK has been my favorite last two days All green there.
Arwind, yes, I can see the objects (but need to put user and password on the popup message first - sometimes twice or tree times before showing the objects)
Yaghya, users not locked. Exchange profile seems to be ok (otherwise even putting the user and password it would not show me the objects).
and the pop up asking for the user and password remains there...
thanks!
roberti

Problem with MS SQL 2005 JDBC Conection

Dear all,
I am new user of MS SQL Server 2005 database and Java developer.
When I conect to MS SQL Server 2005 i have a problem with conection.
First I creat new class named DaoTest to test MS SQL conection.
Here I show my code complete.
{color:#0000ff}
import java.sql.Connection;
import java.sql.Statement;
import com.microsoft.sqlserver.jdbc.SQLServerDataSource;
public class DaoTest {
private Connection connection;
public DaoTest() {
try {
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
SQLServerDataSource ds = new SQLServerDataSource();
ds.setUser("sa");
ds.setPassword("deanweb");
ds.setServerName("localhost");
ds.setPortNumber(1434);
ds.setDatabaseName("common");
connection= ds.getConnection();
} catch (Exception e) {
e.printStackTrace();
public static void main(String[] args) throws Exception {
DaoTest daoTest1 = new DaoTest();
DaoTest daoTest2 = new DaoTest();
}{color}
{color:#000000}and when I run this class a error appeared:{color}
{color:#ff0000}com.microsoft.sqlserver.jdbc.SQLServerException: Connection reset
at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(Unknown Source)
at com.microsoft.sqlserver.jdbc.TDSChannel.read(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.Prelogin(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDataSource.getConnectionInternal(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDataSource.getConnection(Unknown Source)
at DaoTest.<init>(DaoTest.java:21)
at DaoTest.main(DaoTest.java:32)
{color:#000000}But when i change main methol as{color}:
{color}{color:#0000ff}public static void main(String[] args) throws Exception {
DaoTest daoTest1 = new DaoTest();
daoTest1.connection.close();
DaoTest daoTest2 = new DaoTest();
}{color}
->>successful.
{color:#ff0000}{color:#000000}That mean I {color}**can not**{color} creat more than one instance of class DaoTest if i do not close {color:#000000}*daoTest1*'{color}s conection.
I only see this error with MS SQL Server,none in Postgres or HSQL.
Please help me.
Thank for reading and I am waiting for your reply.
sorry my english.
[email protected]
Edited by: DrNhut on Jun 24, 2008 3:39 AM
Edited by: DrNhut on Jun 24, 2008 3:44 AM

Thank you.
I try your code but it didn't work.
So,here my code with your opinion
String connectionUrl = "jdbc:sqlserver://localhost:1434;"
               + "databaseName=common;selectMethod=cursor;";
//                Declare the JDBC objects.
               Connection con = null;
               Statement stmt = null;
               ResultSet rs = null;
               try {
//                Establish the connection.
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
               con = DriverManager.getConnection(connectionUrl,"sa","deanweb");
               } catch (Exception e) {
               e.printStackTrace();
     public static void main(String[] args) throws Exception {
          DaoTest daoTest1 = new DaoTest();
          // daoTest1.connection.close();
          DaoTest daoTest2 = new DaoTest();
     }It throws same error with my last posted.
I can't use your code exactlyString connectionUrl = "jdbc:sqlserver://localhost:1434/common;selectMethod=cursor";because it throws a new exception:com.microsoft.sqlserver.jdbc.SQLServerException: The port number 1434/common is not valid.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:582)
     at java.sql.DriverManager.getConnection(DriverManager.java:185)May be I change my DBMS instead of MS SQL 2005.
(I nead a database can manage big data.So,I choose MS SQL).
thank you.
DrNhut.
Edited by: DrNhut on Jun 25, 2008 6:39 PM

TS4123 I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

The results show that you have a proxy server set and this can often cause problems with iTunes.
The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
Try un-checking the proxy server check box.
It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
You can download a free version of an excellent scanner- Malwarebytes here:
http://www.malwarebytes.org/

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Problem with PPPoE & ADSL conection

Hi People,
I installed Archlinux a few times, and 0 errors.
Recently, (Yesterday) i was installing Arch, and i can`t do the conection.
I have,
Ethernet Card
ADSL Modem Router (No usb) This modem not have the user name, password etc...
Steps>
1 Boot Arch {live cd}
2 Login Root
3 pppoe-setup & complete the configuration
4 /etc/rc.d/adsl start
And... timed out!
5 ifconfig -a
and... only shows eth0 & lo
ppp0 is missing!!!
and, i couldn`t continue....
This problem is in Archlinux only....
Debian, Crunchbang, Fedora.... the connection works!
someone can help me with this?
I read the wiki but, i couldn't get work.

ewaller wrote:
I assume this is the article you had read. If not, well, then give it a try.
I have not used PPP since I had a dial-up modem. I think the one step you are missing is the kernel module. You did not saw whether you had added ppp-generic to your modules array. Check that the module is loaded with lsmod.
Yes, i read the wiki (pppoe setup with pppd)...
I never did the PPPoE conection with pppd... because, always worked aplying the steps that i have mentioned before.
Anyway, I tried the conection with pppd, and doesn't work.
Respect ppp-generic module...
I couldn't see the complete list by lsmod... but, i used:
modprobe ppp-generic
Also, (later) i used
modprobe pppoe
modprobe pppox
in addition to ppp-generic
and the conection, not work.
i see the error.log :
it's a problem with the devices..... The system couldn't search the pppoe device.. in the eth0 interface...
if i run ifconfig -a.. Only shows, eth0 and lo
In debian.... shows eth0 lo and ppp0 (but the configuration it's different.. it was made with pppoeconf)
i run dhcpcd.... but.. doesn't work...
In windows, the pppoe conection works.... but... with DHCP.. the system shows a popup with:
"No ip associated" the connectivity is limited or null (but, runs OK)
Inclusive, i push Reset button in my modem... and.. it continues as before
PD: I have only one ethernet card.... (no usb)

Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

post in a yahoo messenger forum. These forums are for apple products and software.

BICS Conection problem with prompts

Similar Messages

Maybe you are looking for