Bid invitations are not going to Vendors

Hi,
We create BId invitations, but vendors are not recieving these invitations. We created contact persons and maintained vendor email address and everthing is working fine till last week. we got compalin that not recieving any Bid Invitation emails this week.
When we see T-code SOST, all vendor email address are showing in Greena and saying everything went fine...can some one tell me where could be the problem...and where to check.
If it didn't go to one vendor i can understand there is problem from vendor side...none of the vendors getting BId Invitation emails...
Thanks,
Ravi

Ravi,
  To me it sounds like your SMTP server problem.
  Here is a test you can do to confirm that to your mail folks.
Go to SO01 transaction and send yourself a test mail. In the recipient list use internet and use a external mail account (yahoo or gmail etc). Then check in SOST that mail has been sent. Then check if you receive that email to your external account. Do the above steps for your company internal address and check. That should tell you if the external emails are blocked on SMTP server.
SG

Similar Messages

  • Excise Details are not maintanied for Vendor,  Message no. 8I565;

    Hi Gurus,
    We have up-graded system from 4.7 to ECC 6.0, Now encountering following error while capturing Excise at MIGO.
    Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565;
    Kindly suggest a solution for the above error.
    Best regards
    Naveen D'Souza

    Hello ,
    Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565
    The above given error is common while MIGO while capture of excise invoice. The above written guys are correct, please check J1ID for that Vendor,
    1) if after maintening also , suppose you get the above error while MIGO, then select "Only Part1" option in MIGO , and press Check Button, if error goes,
    then again go back and select "Capture excise invoice", then system will not give you the above error while Capture of excise invoice in MIGO.
    Please check some SAPOSS notes also.
    Regards
    Mahesh Naik.

  • Excise Details are not maintanied for Vendor 0000000957.

    Hi,
      As per our regular process  we are capturing inovie with J1IEX  and doing GR in MB01   now i have captured  invoice in J1IEX  and while making GR with MIGO i am getting error
    Excise Details are not maintanied for Vendor 0000000957. ,  but when i am making GR with MB01 i am not getting any error.
    also what configuration required to capture excise invoice and make Gr in MIGO,  as capture excise invoice menu is not coming in MIGO  in MIGO Exicse tab i can only see  only  refer excise invoice  ,  only part1 , no exicse registration.
    regards,
    zafar

    Hi,
    Do proper setings in Logistics - General -Tax on Goods Movements -India -Basic Settings -Maintain Excise Groups  - select your excise group and check settings in MIGO Settings such as EI Capture, Post EI in MIGO, Duty different at GR.
    Also ensure that you have maintained excise details for Vendor and Material in J1ID.
    Regards,
    Vikas

  • Emails from the organization are not going through ePrint

    Hi,
    I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that 
    The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
    We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

    Hello praveen_haridas,
    Welcome to the HP Support forums.  I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
    Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account?  If so what does the message state about the failed job?
    Thank you.  
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Service Account details are not going through header(OSB Business service)

    Hi
    I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
    A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
    I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
    Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
    I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
    Can someone please help me why service account details are not going through business service request. Am I missing any steps?
    Thanks in advance
    KK
    Edited by: 966531 on Oct 23, 2012 4:23 AM

    Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
    Regards,
    Anuj

  • Excise Details are not maintanied for Vendor: GRN error

    Dear All,
    We have upgraded our Ecc 6.0 system to latest  application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
    Please let me know if any note or object to be updated to correct this error.
    Thanks
    Raghavendra.

    hiii
    Can u tel me where exactly the excise range was missing ??
    Because if excise range is missing , it won't throw this lind of error .
    U have found any other???????
    Thnaks
    SAP-MM

  • When SC is partially rejected my manager no workitems are not going to user

    Hi Gurus,
    Below is our requirement:
    Requester (User) creates a SC of multiple line items. Shopping cart is rejected by the manager for a particular line items and rest of the line items was approved, for the rejected line items workitems are not going to requestoru2019s inbox and also e-mail is not triggered to requistioner.(Informing that the SC is partially approved)
    Help us how to implement the above functionality? We have figured out a BADI- BBP_WFL_SECUR_BADI will this BADI suit to our functionality.
    IF then throw some input on this. Or please suggest any OSS note related to this functionality.
    Regards
    Paul

    Hi Daniel,
    Thanks for the quick response.
    WF we used is WS14000133, Last approver is Manager further no approvers.
    For Manger they havenu2019t set (BBP_WFL_SECURITY) any value.
    Regards
    Paul

  • Mails are not going

    Hi Experts,
    I have developed a RFC to approved leave, this RFC will send mail to required recipients. After executing the RFC, when we check into the TCODE: SCOTT mails are sending properly. While the same RFC calling from .NET mails are not going.
    Please let me know any kind of configuration required in .NET or Share point.
    Please do the needful.

    Hi,
    Refer below links.
    Mails are in "Waiting" status in SCOT
    Mails not send in SOST
    Regards
    Durga

  • Mails are not going from apex application

    Hi,
    Mails are not going from my apex application. I had done the instance settings by logged in as admin. SMTP port is also connecting. Please help me to solve the issue.

    Hi,
    Mail queue is vacant. I think the problem is with the process. No process or validations are working. Actually, I have copied this application from another schema. Is there is need to set anything?..I had regenerated all the tables,functions,triggers in my schema .Processes and validations are completely inactive

  • My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?

    My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?  Anyone else having these issues?

    There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
    If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

  • Messages are not going through in my Ipad. I have upgraded to ios5

    My messages are not going through in my ipad. Recently I upgraded to OS to ios5. It says not delivered.

    Try calling *228 and choose option 1 to reset the 0's and 1's on the device.
    Is there a setting on her phone that she may have triggered in her contact for you by accident to block your texts

  • HT5627 My I messages are not going through

    My I messages( text) are not going through
    I have to change all to deliver as text

    Yes, many are experiencing this issue.  A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
    Let Apple know about the issue here:  http://www.apple.com/feedback

  • Email Notifications for Collaboration Tasks are Not going to Lotus Notes

    Hello Everyone,
    Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
    I performed all the configuration activities that are suggested in the below wiki:
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
    It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
    Could any one please suggest that we need to do any other configurations.Thank you.
    Regards,
    Sridhar.
    Edited by: Sridhar on Mar 18, 2009 12:14 PM

    Hi Sridhar,
    I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
    https://wiki.sdn.sap.com/wiki/x/g4KmAw
    Please see if it helps,
    Robert

  • Reminders are not going off in my Calendar app

    Hi,
    The reminders I set in the Calendar app are not going off/alarming. I'm currently using Gmail as my default calendar, and it doesn't alarm when a reminder is due.
    I've already fixed the date-time settings of my gmail calendar to match my blackberry, and I still miss reminders because they don't alarm.
    Whenever I restart my q10, the reminders apprently go off/alarm, but as the day goes on, my reminders no longer alarm. does anyone else have the same problem? Any advice? Thanks. 
    Santi

    Hello santi51, 
    Welcome to the forums. 
    I would suggest you you contact your mobile service provider and ask that this issue be escalated to BlackBerry support for investigation and analysis. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Deletion change pointers are not going to ECC after C5

    Hi,
         My issue is that I am running C5 after Planning run.But deletion change pointers are not going to ECC.Because of this we have duplicate of orders in ECC.We are running CCR to bring back the "Planned orders with deletion change pointers and deleting again using RRP4.Why deletion change pointers are not going along with creation change pointer?Help will be highly appreciated.
    Thanks&Regards
    Venkadesh

    Hi,
    Check whether you have enabled the " delete events" check box. This check box will be valid if you are publishing the planning results thru background job.
    If you set this indicator, the system deletes all selected change pointers without sending them first.
    Thanks,
    nandha

Maybe you are looking for