Bid Opening date Pre-poning error

We are trying to pre-pone the Bid opening date, system is giving error "Date & time is earlier than already given date & time"
In configuration there are is message control for this message.
How can we make this error to warning?
Regards,
NNK

Hi Nitin,
You can go to SRM Server --> Cross-Application Basic Settings --> Message Control in SPRO to do this.
You can enter the message id, number and change the type.
Regards
Saravanan.
+ Please award if useful+

Similar Messages

Bid Opening Date Removal

SRM Experts:
We currently use SRM 5.0 but will be upgrading eventually to 7.0
The Bid Opening Date can be removed after the RFx is Published. This allows users to see the Bids that have been submitted. This is a problem for us and our Auditors don't like it.
Is there a way to prevent the Opening Date from being removed after the RFx is Published?
Thanks
Troy.

Hi,
How about hiding the opening date field in RFX UI? So Purchaser can not specify the opening date.
You can hide fields by customizing in SRM 7.0.
You can also inplement BBP_DOC_CHANGE_BADI and clear the opening date field.
Info:
Date fields in FRx:
- Start Date
- Submission Deadline
- Opening Date
- End of Bidding period
Regards,
Masa

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

Error when opening Data Form

Hi All,
Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error:
You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may be that you do not have access to at least one member of a required dimension, or the member selection resulted in no members present. Contact your administrator
Kindly guide me.
Thanks and Regards
ChiDam

duplicate post - Error while opening Data form
Cheers
John
http://john-goodwin.blogspot.com/

Open data Set Error?

Hi Guys,
              I am using Open dataset for downloading the data into Application server   .I am getting the error file path is not opened but in al11 i was able to see the path what i mentioned here except bseg.txt file.I am getting error at Open data set statement.I have to write the bseg table data into the file bseg.txt in application server.can any body suggest the solution for this problem.
          Very urgent.
wa_BSEG_file = '/interfaces/DR1/MM/outbounb/ZMMOF3007/BSEG.txt'.
OPEN DATASET wa_BSEG_file FOR OUTPUT         "Write to appl. server
                                      IN TEXT MODE
                                      Encoding default. "Open dataset Return code
IF sy-subrc = 0.
TRANSFER it_cosp1 to wa_BSEG_file.
Write : 'File Transferred BSIK'.
ELSE .
Write : 'File Not Found / Transferred BSIK'.
ENDIF.
   CLOSE DATASET wa_BSEG_file.
           Very urgent.Full marks will be alloted if u give me the correct answer.
Thanks,
Gopi.

Hi,
Due to serveral reasons
1. Check whether you have proper authority in the directory?
2. check the whether any files with same name?
3. use addition message in the open dataset statement so that you can know the system message it getting.
DATA: msg(100).
OPEN DATASET wa_BSEG_file FOR OUTPUT MESSAGE msg
IN TEXT MODE Encoding default.
aRs

Can't open itunes due to data execution prevention error

I am currently unable to open itunes due to a data execution prevention error. I have tried to clear temp files, uninstall and reinstall and nothing seems to work. I tried to disable DEP for itunes but nothing seems to work. Can anyone help me?

Try the following, one at a time:
1. First Repair QuickTime. START/CONTROL PANEL/ADD OR REMOVE PROGRAMS/highlight QUICKTIME, click REMOVE, then select REPAIR.
Now test your itunes and see if you still have this problem
2. If you have Codec installed, please uninstall it and test out your iTunes.
3. If all that fail, scan your system for possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator" (for Win XP-just click command prompt)
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Open iTunes and see if problem resolved.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.microsoft.com/kb/310747

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Multiple installs of causing Data provider internal error (-3000) on Open

Hi,
We have an application written against Oracle ODP 10.1.0.401 that's been deployed out on a web farm working great for some time now, however recently another area has asked to get ODP for 11g installed on that server. The install originally broke our application, but we were able to resolve most of the issues after following all of the appropriate "PATH" reordering and registering appropriate dlls. In fact, we finally got a server completely back up and running both versions with no issues.
Unfortunately, it's a load-balanced server, and while one of the two servers is working correctly, the second seems to be having issues with specific parts of the install. We're trying to fix it on the second server now, and will be doing the same install shortly in our production environments.
I was able to break the error out and create a very simple test app to eliminate as many variables as possible. It appears to be an issue with the driver when we enlist into a Distributed Transaction.
The following code works fine:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase + "Enlist=False");
connection.Open();
While this code does not:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase);
connection.Open();
In both examples, connectionStringBase is Data Source=...;Validate Connection=true;User ID=...;Password=...; (where ... represents masked values). I've also tried "Enlist=True" in case the default was a problem, but it also fails.
The exceptions we're getting on the server happen in the .Open() call. The stack trace is:
[OracleException: Data provider internal error(-3000) [System.String]]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure) +779
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +41
Oracle.DataAccess.Client.OracleConnection.Open() +3338
Default.Page_Load(Object sender, EventArgs e) in C:\Code\Oracle11gTest\Oracle11gTest\Default.aspx.cs:13
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +43
System.Web.UI.Control.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2604
I've read a few articles on this particular error and found that it's generally considered an ambiguous error with many potential causes, most of which I've been trying to test and rule out. While I don't have direct access to the server, I've been working with someone who does and they have compared registry settings and registered dlls, and have told me that the 2 servers match, and we've already re-installed the 10.1 drivers hoping it would help, but at this point we're stumped. I've read that it's possible that the COM+ install could have become corrupt, but what confuses me is that just prior to the 11g install, everything works great, and after doing no more than an ODP 11g install, it breaks. Do you have any advice or suggestions we could try?
Thanks in advance for any insight you might have!
~Jeff

If I read your post correctly that this is a "everything is equal as far as we know, but box A works and box B doesn't" type situation, my first suggestion would be to get Process Explorer from http://sysinternals.com, and compare the loaded modules between the working and non-working servers. You'll probably find that you're not using the software you think you're using, or have mismatched dlls across homes, or something to that effect. Once you figure out what the difference between the two is, correcting it will probably be the easy part.
Hope it helps,
Greg

Opening date in bid invitation

How to retrieve the opening date for bid invitation.....its urgent
thanks in advance

Hi,
Use the FM "BBP_PD_BID_GETDETAIL".
BR,
Disha.
Pls reward points for useful answers.

I get a Pre-execute error message when importing from Excel using the wizard.

Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
Can anyone explain what these errors mean and how they can be solved. Thank you.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
Messages
* Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
(SQL Server Import and Export Wizard)
- Prepare for Execute (Success)
- Pre-execute (Error)
Messages
* Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The metadata could not be determined because every code path results in
an error; see previous errors for some of these.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid object name 'dbo.PriceTable$'.".
(SQL Server Import and Export Wizard)
* Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
(SQL Server Import and Export Wizard)
* Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
(SQL Server Import and Export Wizard)
* Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [dbo].[PriceTable$] (Stopped)
- Post-execute (Stopped)
frustrationmultiplied

Hello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Why do basic dates pre-populate on a create order with reference?

When manually creating a production order with reference to another, we sometimes have basic dates pre-populate and greyed out/protected when the 1st screen comes up. Most of the time the dates are open for input and unpopulated. Certain materials cause this to happen. We do not know why. Can you tell me what causes this? We need to know how to predetermine this circumstance to use a BDC.
Thanks,
Ada

Hi Caetano,
Thank you for your response.
I have checked, I have already assigned the work center and the operation in OPJG.
I have created a task list group in CA11 in which I have filled in the work center, the base quantity and the machine time.
When I try to create a production order, the standard sequence and the operation are created (it was not the case before). But the Start date is still not updated. I have the following error message :
"Not all standard values maintained
Message no. C7067
Diagnosis
You have not maintained all standard values in the operation.
Procedure
Maintain the standard values in the operation."
Please consider that I am a junior PP consultant and if it is possible thanks to be clear and precise in your responses.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Allow certain users to capture quotation after bid end date

Hi
Is it possible to allow certain users to be able to capture quotation on behalf of suppliers using surrogate bid after the end date has been reached but before the opening date? How would I do this?
Regards

Hi
As the end date and opening date are at the header level common to all bidders/vendors, we cannot manually capture quotation for specific suppliers using surrogate bidding. I dont think there is even a BADI for this.
Rgds
Reddy

Can not open data grids or run reports in HFM

Hi
We created an application and have been working in it for weeks without any issues. Just recently once we open the app, we can longer open data grids or run financial grids. The system just hangs and we do not get an error message. Has anyone experienced this? We are wondering if it is a space issue on one of the data base tables.

Hello,
I would start by checking with your DBA to see if you have any issues with table space. Next, i would log onto the HFM servers and see if you have any errors being recorded in the Application Event View. If you do have errors in your Event Viewer, can you please post them?
Thanks
Edited by: tonyfeole on Oct 13, 2009 1:33 PM

Bid Opening date Pre-poning error

Similar Messages

Maybe you are looking for