Bid Response : Interface data contains errors
Hi Gurus
We have created a bid invitation ,the worflow is set on Without Approval . We are trying to create a bid response , after maintaining the bid , we select check and get the error " Interface data contains errors"
Does anyone know how to go about resolving this
Hi,
Have you implemented any BADI in your system?If yes,please check whether it is properly activated or not.The error log is due to the improper implementation of some badi.
for the time-being,
Try de-activating all the custom BADI Implementations and chek, what is happening, in the standard SRM system.
BR,
Disha.
Do reward points for useful answers.
Similar Messages
-
Interface data contains errors while submitting the Bid by vendor
Hi
This is with regard to strategic sourcing. Purchaser carried out a sourcing with start date 05.03.2010 and end date as 10.03.2010. Now the vendor is trying to create his bid by selecting "Process Bid" option. Vendor is getting Bid invitation no, to create a Bid. Here while submitting he is getting the error as " End date has been reached. The submission deadline has passed", eventhough the end date is 10.03.2010. And getting a message "Interface data contains errors". So he is not able to submit the bid. For all the bid invitation vendor is getting this problem.
How to resolve this?
ThanksHi Muthu
Thanks for ur response. It was a no range problem which I found & rectified.
Regds -
Interface data contains errors
Dear all,
We are on SRM 7.0. When trying to create a purchase order from an accepted bid the following error appears:
"interface data contains error", no more details shown.
It happens with both buttons: "Create Purchase Order" and "Simulate and create purchase order".
Any ideas to solve it?
Thanks
EzequielHi Eze
purely no range issue
create purchase order from bid invitation
Standard process for PO creation from Bid Invitation or Bid
double confirmed. revisit your Bid invitation , bid and Po number ranges.
br
muthu -
Hi Expert,
We're facing error 'interface data contains error' when generate Purchase Order for bid submitted by bidder.
anyone has experience with this error?
Thanks,
YusupHi
Please refer this note 1042490 - Interface Data contains Errors in the sourcing cockpit.
This note might be useful for you.
Muthu -
Error in using BAPI_CONFEC_CREATE : Interface data contains Errors
Hi,
I am using this BAPI BAPI_CONFEC_CREATE to create confirmations locally in SRM for a PO. I am following Documentation available for this BAPI. But when I excuted with below data getting error " INTERFACE DATA CONTAINS ERRORS"
I am passing these data:
Hedaer: Ref_doc_no - PO Number
Description:
Process Type: "CONF"
Header_cust: parent_guid : PO GUID
Item: Parent: PO Header GUID
PO Number: PO number
PO GUID: PO HEDAER GUD
PO ITEM Number: PO item Number
PO_ITEM_GUID: po item guid
Account:
Parent_GUID : PO Item GUID
G/L acct : Po G/l acct
cost center : PO cost center
what are the data sholud be passed to this BAPI?
Am I missing any input data to this BAPI? Please let me know.
Am I using correct Function Module to create a confirmation for a PO in Stand alone scenario?
Thanks.
Shears
Edited by: Shears80 on Sep 10, 2010 1:39 AMHi Matt
I'm using the same FM but it's not working. Can you please share what data you are passing in the FM.
After debugging I found that my confirmation is getting created but it's not getting saved.
Please enlighten me.
Thanks
Ankit -
BBPCF02 - BBP_PD002 Interface data contains errors
Hi all,
I need your help.
We have a problem when the user confirm a purchase order from transaction BBPCF02.
During the creation of confirmation the system returns the pop-up with message "Interface data contains errors".
I have SRM 5.0 classic scenario.
Thanks in advance.
Daviderefer to note 805965. Although this note is not exactly for the problem you are stating but it should be close enough to solve your problem.
-
External transfer of PR ( PDP Scenario ) : Interface data contains errors
Dear All,
We are in SRM Server 5.5, Extended Classic.
Scenario >> Plan driven procurement
We have a purchase requisition generated via Plant Maintenence order. The PR is created for services and also has limits maintained ( overall and expected value ).
The PR is not getting transfered to the SRM. However in SRM SLG1 we see error log :
Interface data contains errors
Message no. BBP_PD002
Please advice if you have faced similar issue.
Regards,
Anil RajpalHello,
You can debug the PR transfer to find out why this error is coming.
1. Go to table EPRTRANS -> take the PREQ number.
2. Go to SE38 -> BBP_EXTREQ_TRANSFER -> F8 -> provide PREQ -> /h -> F8.
3. Go inside FM BBP_EXTREQ_TRANSFER ->
4. Go inside perform transfer_package ->
5. Go inside Perfrorm Send_pr_to_procsystem ->
6. Clear lv_qrfc = '' -> goto inside FM BBP_BC_EXTREQ_INB -> Here SRM will be called (maintain the RFC connection with dialog user. Then it will be able to debug onto SRM side).
Once logged onto SRM, put a breakpoint at FM BBP_PD_MSG_ADD. Here error will be triggered. If you go back some steps via call stack, you can see why this error appears.
Regards,
Ricardo -
Error Caller 09 contains error message - Data Marts loading(cube to ODS)
Dear all,
Please ! Help me in this problem, This is very urgent.
I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
Thanks,
Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AMHi Friends !
I didn't find any short dump for that in ST22.
Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
in the source system
And Details Tab shows following Messages :
Overall Status : Missing Messages or warnings
Requests (Messages) : Everything OK
Data Request arranged
Confirmed with : OK
Extraction(Messages) ; missing messages
Data request received
Data selection scheduled
Missing message : Number of Sent Records
Missing message : selection completed
Transfer (IDOCS and TRFC) : Everything OK
Info Idoc1 : Application Document Posted
Info Idoc2 : Application Document Posted
Processing (data packet) : No data
This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude -
Caller 09 contains error messages in infopackage for master data
Hello
we are facing issue in info package some records were available in psa and then we got the job cancelled at R3 side and the short dump attached screen shot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restartHi,
Can you please check the extractor in RSA3.
Also try to find the record which is failing and fix the Profit Center for that record.
If you dont know exact error record, please take help from FICO guys.
Else do random loads like, if total no of records are 100
Load 50 records by giving selections. If it went fine, then go to next 50. Do loads in Binary search way.
Regards -
%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next p
I am getting the error in my 7200 vxr router where running ios is c7200p-advipservicesk9-mz.124-15.T4.bin
my observation is
when tunnel interface is going down that time i am getting this error
error is
%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next pointer, -
Traceback= 0x140C170 0x3760FDC 0xE0E31C 0xE0EB80 0xE0B910 0x1A4C9FC 0x1A4CC44 0x1A5C378 0x168B05C 0x2D9298 0x1A3E854 0x1A3F110 0x2930240 0x2E5850 0x2905A30 0x2905F08It does not say much !
The following are utility messages.
Message
%UTIL-3-DLL : Data structure error -- [chars]
Explanation A software error occurred, resulting in a data structure inconsistency.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Also perform a search of the Bug Toolkit
http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the gathered information. -
The boot configuration data for your Pc is missing or contains errors: error code 0x000014c
Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
RajHi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS. -
Response from server contained an error
halo
i've got problem, while working with dashbords, an error occures 'Response from server contained an error', have any one has an idea what can cause such error?
thanks for all hints
anaCan you be a little more specific? Please post the full error message that you are getting.
Looks like this is related to obiee server response to the presentation server. Make sure your OC4J and BI server service is on while running a request.
Thanks
Prash -
Error:- "Response from server contained an error"
Hi,
I'm getting an error while running the dashboard Report.
It works find for two times but third time the error message comming up in dashboard Top left below dashboard prompts saying "Error:- Response from server contained an error"
I'm accesiing OBI dashboard from EBS.
Appreciate your help.
ThanksHi,
We also faced the same error some time back when clciking on dashboard items is logging us out.Finally we moved the dashboard pages from that dashboard to newly created dashboard and the problem is resolved.
Please check below step also .
1) When you are clicking on Dashboard was all services are up and running ,oc4j?
2. check your dashboard link also might be having symbols like &????.
Hope this help's
Thanks
Satya -
I am working on SharePoint 2010 Infopath form, i have created one secondary connection to SharePoint List view using XML Connection it works fine.
For the deployment from DEV to PROD i converted this connection to universal data connection (UDC) and tested this before deploying to PROD but i m getting below error.
An error occurred querying a data source.
i checked ULS logs and found below details
Data adapter failed during OnLoad: The UDC file contains errors: '=' is an unexpected token. The expected token is ';'. Line 17, position 108.
UDC file is below
<?xml version="1.0" encoding="UTF-8"?>
<?MicrosoftWindowsSharePointServices ContentTypeID="0x010100B4CBD48E029A4ad8B62CB0E41868F2B0"?>
<udc:DataSource MajorVersion="2" MinorVersion="0" xmlns:udc="http://schemas.microsoft.com/office/infopath/2006/udc">
<udc:Name>LastItemID</udc:Name>
<udc:Description>Format: UDC V2; Connection Type: XmlQuery; Purpose: ReadOnly; Generated by Microsoft InfoPath 2010 on 2014-04-25 at 16:49:31 by DOMAIN\username.</udc:Description>
<udc:Type MajorVersion="2" MinorVersion="0" Type="XmlQuery">
<udc:SubType MajorVersion="0" MinorVersion="0" Type=""/>
</udc:Type>
<udc:ConnectionInfo Purpose="ReadOnly" AltDataSource="">
<udc:WsdlUrl/>
<udc:SelectCommand>
<udc:ListId/>
<udc:WebUrl/>
<udc:ConnectionString/>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
</udc:SelectCommand>
<udc:UpdateCommand>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Submit/>
<udc:FileName>Specify a filename or formula</udc:FileName>
<udc:FolderName AllowOverwrite=""/>
</udc:UpdateCommand>
<!--udc:Authentication><udc:SSO AppId='' CredentialType='' /></udc:Authentication-->
</udc:ConnectionInfo>
</udc:DataSource>
w: sandippatilblog.blogspot.com/Hi Sandip ,
How about escape “&” to “&” as below:
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
Reference:
http://social.technet.microsoft.com/Forums/en-US/534fae6b-2cef-4947-86e2-4869cb291cfe/the-form-cannot-be-opened-because-it-requires-the-domain-permission-level-log-id-5566-error?forum=sharepointcustomizationlegacy
http://stackoverflow.com/questions/3493405/do-i-really-need-to-encode-as-amp
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
Hi Gurus, How can we have balances of vendor, project wise with different WBS elements? Please revert asap. Thank You
-
How to create an instance of a protected class outside the enclosing packag
Hi all, I have a piece of code like this: package test; public class A { protected class B { } How to create an instance of B outside the package test ? Could you please give me an example ? Thanks Ha Chau
-
Why does all videos keep buffering and not play
Why do videos keep buffering and play when I select them?
-
When trying to log on to the iTunes store I get the following error "iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active. then try again" Ca
-
Excise capturing without part numbers
Dear all, For the part numbers which are not created, can we capture the excise duties. If yes, how it can be done? Thanks & Regards, ar