Bidder should be able to get create response button before payment of Tender fee

Hello Friends
I would like to discuss and find solution for below scenario :-
In case of Open Tender, Tender Fee is required to pay either Online/Offline before submission of bid because it is marked required in customization “Define Tendering Option”.  Subsequently When Vendor Clicks on Register button and system check whether Tender Fee is paid by the vendor or not. If tender fee is paid then system show “create Response button” but tender fee is not paid by the vender then system doesn’t show “Create Response button”.
Business requirement is to Appear Create Response button before payment of Tender fee but when we marked “Tender Fee” as optional in customization “Define Tendering Option” than Create Response button is appear before payment of tender fee but other side from purchaser portal while payment offline payment, Tender Fee is not showing in drop down of Related link. I am looking a solution if Tender Fee is marked as optional to get Create response button and Tender Fee option is to be also show in drop down of Related link.
Vendor Portal:
Purchaser Portal:

I doubt there will be a 1 per customer rule....this wasn't the case with the iPhone 4 and that release may have been one worthy of it since it was the first time after years of wanting it Verizon customers were getting the chance to get their hands on one. But as far as the original question, yes you can get it. You are well within the exchange period so you can either exchange or just return it now and then buy the 4s on the preorder date...or the store release date. If you have any concerns about the possibility of not liking the 4s after getting it and wanting to be able to exchange it after that you might want to just return the iPhone(s) you have now and then buy the 4s when available. I say this because if you exchange now and then decide you don't care for the 4s you won't be allowed to exchange again to a different device. It won't matter if you love the 4s....matters a lot if you don't and end up stuck with it because of that one exchange policy.

Similar Messages

  • I'm not able to get the Enable button on Filevault

    I'm not getting the Enable button on Filevault 2 in order to add more users to the system. It's simply just not there.
    file://localhost/Users/dtservice/Desktop/Screen%20Shot%202013-10-23%20at%205.44. 53%20PM.png

    I have the same issue. I am logged in as the admin user and would like to add an additional user to unlock FileVault on OS X Lion (10.7.5) but the "Enable Users" button is not present on the FileVault tab.

  • Can't able to get Soap response in Webservices

    Hi everyone...
    I have developed a simple web service which takes a simple string and
    returns that same string....
    I wanted to deploy the service on weblogic... I got the following error...The request goes into the service and it makes the response object also but when the response is actually getting converted to SOAP message it gives the error....I'm struck up here....
    So Please someone guide me soon to proceed next.....hopefully with a solution....
    Im using
    1. Weblogic8.1
    2. Oracle9i
    3. style = "document"
    thanks a lot...
    Dilip
    Error shown on the WebLogic console
    Server side Request SOAP Message =>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:q0="http://www.intellect.com/wsdl" xmlns:xsd="
    http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SOAP-ENV:Body>
    <q0:PFHoldingRq><q0:RqUID>100000</q0:RqUID><q0:ClientID>00033</q0:ClientID><q0:OrderDate>12/NOV/2006</q0:OrderDate><q0:SecurityCod
    e>000000002064</q0:SecurityCode><q0:OrderNumber>55545454</q0:OrderNumber><q0:NoofUnitsExecutedOrSettled>1000</q0:NoofUnitsExecuted
    OrSettled><q0:OrderedAmount>100000</q0:OrderedAmount><q0:TransactionType>BUY</q0:TransactionType><q0:ExecutedType>E</q0:ExecutedTy
    pe><q0:MarketRate>100</q0:MarketRate><q0:ProductSettledValue>100000</q0:ProductSettledValue><q0:BrokerageAmount>12</q0:BrokerageAm
    ount></q0:PFHoldingRq>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    Nov 25, 2006 6:39:46 PM com.sun.xml.rpc.server.http.JAXRPCServletDelegate doPost
    SEVERE: caught throwable
    java.lang.AbstractMethodError
    at com.sun.org.apache.xerces.internal.dom.CoreDocumentImpl.importNode(CoreDocumentImpl.java:1442)
    at com.sun.org.apache.xerces.internal.dom.CoreDocumentImpl.importNode(CoreDocumentImpl.java:1410)
    at com.sun.xml.messaging.saaj.soap.SOAPDocumentImpl.importNode(SOAPDocumentImpl.java:128)
    at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.importNode(SOAPPartImpl.java:340)
    at com.sun.xml.rpc.streaming.XmlTreeWriter.addNewNode(XmlTreeWriter.java:108)
    at com.sun.xml.rpc.streaming.XmlTreeWriter.startElement(XmlTreeWriter.java:142)
    at com.sun.xml.rpc.server.StreamingHandler.writeResponse(StreamingHandler.java:729)
    at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:406)
    at com.sun.xml.rpc.server.http.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate.java:443)
    at com.sun.xml.rpc.server.http.JAXRPCServlet.doPost(JAXRPCServlet.java:86)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Message was edited by:
    g.dilip

    Hi:
    My recommendation would be to contact HP support for the country you live in at the link below.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Call the phone number listed for business PC's/notebooks and inform the customer services rep that you need a set of recovery disks for your notebook.
    You will need to have the model number and serial number handy to provide to the customer services rep.

  • Stuck on GDMT, but should be able to get ADSL2+

    Hi,
    I recently renewed my contract moving from the old “BT Yahoo” package to “BT Total Broadband Option 3”, but I am still stuck with ADSLMax speeds even though my local exchange is ADSL2+ enabled.
    The local exchange has been 21CN enabled since August 2008, and the BT Wholesale ADSL checker also notes that with ADSL2+ a speed of 15Mb/s may be possible for my line.
    After moving from “BT Yahoo”, receiving my HomeHub, and changing the payment source from Credit Card to Direct Debit, my speed increased from the capped 2Mb/s to a faster 6-8Mb/s, but is still connecting via GDMT and not ADSL2+.
    From speed tests my connection is achieving 6244 kbps (781kB/s) down steam and 334 kbps (41.8kB/s) up stream.
    The stats from my router are:
    Mode: GDMT
    Down Speed: 7616000
    Up Speed: 448000
    SNR Margin: 11.0
    Loop Att.: 26.0
    Has anyone got any ideas about why I am not able to connect via ADSL2+?

    hamish72 wrote:
    I think some times the upgrade is automatic and others have to request it and will probably be asked to enter a new contract to upgrade
    May be simply down to in or out of contract and how much remains
    As hamish72 says it appears to be that if you get an email from BT advising that exchange has been upgraded then that is automatic and you need do nothing (there are instances where this is not correct).  However if you want to get your line upgraded to 21CN outwith the automatic process then you need to phone BT and probably agree a new 12 month contract and try and negotiate a reduction in your monthly cost  The latter was the route I took but it took a few calls to sales to eventually get upgraded.
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I have a second generation ipod touch that will not update past version 3.1.3, when i check updates it says it is up to date but im quite sure i should be able to get at least a 4.2 ios update. If someone could please help id really appreciate it!!

    I have made sure that my ipod is second generation, and i have tried to resotr it twice to fix the problem. I'm getting a little bit frustrated with it. I went to the apple store in metrotwn and the gentlemen didnt even look at the ipod, just told me that it was maybe to old of a generation to support updates. Funny thing is my boyfriend had it before me and he updated it past 3.1.3 no problem.

    - Are you sure you have a 2G iPod and not a 1G? Yucan can itell the difference here by the shape of the black antenna cover on the back of the iPOd.
    Identifying iPod models
    - What version of iTunes is installed opn the computer?

  • Bidder gets "no authorization for the action" when creating response to RFx

    Hello. I am working with SRM 7.0. As a bidder with
    Portal Role: RFx Respondent
    SRM Role: /SAPSRM/BIDDER
    I was trying to create a response for an RFx by highlighting one of the eRFx in the query result list and clicking on "Create Response" button. I was given a pop up window with error "User is not authorized for the action". This happens to all eRFx in the bidder's list. I was able to properly launch the RFx by clicking on "Display Event" though. Any pointers in this regard would be highly appreciated.

    Hi Jay
    drill this note code howeve rit is appliacable for srm600. u will get clue
    Note 1151053 - Invalid authorization error is displayed to the user
    Symptom
    During RFx creation even though user has permissions to create a new document system throws a error message:"User is not authorized for the action".
    Other terms
    Authorization Checks, Bid Invitation, RFx, Not Authorized for the Action.
    Reason and Prerequisites
    This error is caused by a program error.
    eze:- please help Jay. he is facing the same issue whice you encountered long back
    Muthu
    Edited by: Muthuraman Govindasamy on Jan 20, 2010 10:23 PM

  • How long should it take to get my old number back ...

    I moved house 4 working days ago. New house is on same exchange as old, sa asked to keep my old number.
    The order is apparently in two parts:
    1) Cease line at old address - done on day "1"
    2) Connect new line at new address - engineers "cancelled" on Day 1. No reasons given on the order and I wasn't contacted to tell me all had gone to a ball of chalk..... I'd have been none the wiser had I not bothered to check.
    Over the weekend I spoke with various people, leading to a new order for a new line, to be installed on day "4" (today). It wasn't possible to pull my old number out of the allocatable pool (presumably (good!) it was still allocated to the cancelled order?) The engineers were "asked" in a note on the order to move my old number back onto the line.
    This line is now up and running on a temporary number.
    As my O2 broadband reconnection is waiting till I have a line with a stable number on it and I am keen to get it back asap, how long should I have to wait? Is there anything that could happen that will sabotage getting my number back and what should I do to prevent this?
    Jon

    I am with you on this and am very interested also as to the answer.
    I was originally with BT, then moved to Sky as I wanted Sky TV, and thought it best to get the complete package. They never once mentioned, "oh by the way if you move home you lose your number". I think they should highlight this, and then watch there customer base drop.
    Anyways, that aside. I have decided to come back to BT, and BT have created a new number at my new address, and when the line is activated I have to call to get a renumber and hope that the number I want hasn't been taken.
    i presume by law Sky have to put the number back into the pool, and therefore should be able to get BT to get it back. Fingers crossed.
    What reasons could there be that they cant get the number back.

  • Getting error response while trying to access REST webservice through Powerbuilder

    Hi Team,
    I am trying to access a rest webservice through powerbuilder 12.5(.net).The rest webservice is secured through basic authentication.I am passing the userid and password through powerbuilder to acess the service,But its returning an error .But while i am trying to accss the same REST webservice through SOAPUI, i am able to get the response.
    Please find the below line of code which i have written in powerbuilder.
    p_testcleint2 lp_rest
    string ls_string
    lp_rest=create p_testcleint2
    PBWebHttp.WebClientCredential lsCredential             //configure credentials
    lsCredential = create PBWebHttp.WebClientCredential
    lsCredential.AccessAuthentication = PBWebHttp.AuthenticationMode.Basic!
    lsCredential.Password='Pa$$word1!'
    lsCredential.Username='admin'
    lp_rest.restConnectionObject.ClientCredential = lsCredential  //add credentials to connection
    try
       lp_rest.PostMessage()
    catch (System.Exception ee)
      messagebox("Failure",string(ee.Message))
    end try
    Error i am getting as below :
    The remote server returned an error:(401) unauthorized.
    Can you please let me know why this error is coming or do i need to any extra paramert in the lsCredential to handle this.
    Thanks in advance.
    Regards
    Subrat

    Hi Chris,
    Thanks for the reply.
    Yes i checked -in fiddler, the basic authentication request is not generating in the fiddler.
    In the same Rest service if i turned off the basic authentication then call is happening in Powerbuilder and its displaying in fiddler also.
    Regards
    Subrat

  • SRM RFx "Create Response"

    We have noticed that the "Create Response" button is not available to bidders on the POWL screen and in order for them to work a bid they have to highlight the event number and display the event.  When the new window opens up the create reponse is available to them.
    Previously the Create Response was available upon first logging into the POWL and you could highlight the event and hit create response.
    We are on SRM 7.1 and believe since applying ep 1 they functionality was disabled.
    Has anyone else noticed this?

    Dear Simon,
    the "Create Response" button should be there on the screen.
    Please check the assigned role for the bidder (/SAPSRM/BIDDER_EHP1):
    If you are on SRM 7.0 EHP 1 please assign this role to the bidder: /SAPSRM/BIDDER_EHP1
    Best regards,
    Tamas

  • Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English.  The minute I type in my password, the keyboard gives me letters that i did NOT type.

    I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,.  When setting up  I chose the French numerique keyboard, although there are two choices French or French numerique.  I put in my language as English.  When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot.  My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
      Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations.  I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted.  I am in the process of formatting it again, this time on my own.  If the Start page does not accept my password again this can only mean that the Mac left the factory with faults.  I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac.  I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all.  I am not impressed with the so called King of computers!  First of all the dot system is daft.  People want to be able to see and confirm their passwords before they are set for good.  Second,  this problem is going to give me a lot of grief.  Switzerland business is not renowned for its after sales service or the time it takes to do repairs.  When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it.  How's that for good proper service.

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • Why am I not able to  get a break down of my off peak minutes for my calls made to Mexico?

    I have the Nationwide Mexico Plan. I have unlimited nights and
    weekend calls for the United States and a 1000 minute limit for Mexico. I always check my minutes by *611, #646 or My Verizon. Why is there never an estimate of how many minutes I use calling Mexico? Why is it that, not even a customer service rep can give me an estimate of the minutes I have used calling Mexico ? If I have a limit, I should be able to get an estimate of how many minutes I am using . Maybe Verizon expects me to go on My Verizon and calculate it myself with calculator, the primitive way. I am very disappointed with Verizon. Verizon is suppose to be the best. Why is there no email address for me to email a person with any issues I have with this service. Will my issue be resolved? Will anybody ever answer me? Is this discussion group going to help me with my problem? Will I have to report Verizon to the FCC.
    Hoping to find a solution!!!!  >Changed Font<
    Message was edited by: Verizon Moderator

    Being a college graduate, I am sure you are aware this is a "forum" and NOT a "chat room".
    As to contacting the BBB or FCC, I was not aware the FCC required Verizon to give you a "breakdown" or summary of your Mexico minutes separated from the rest of your minutes. I guess you learn something new every day.
    You say your minutes are available in your MyVerizon but they are just not listed as "Mexico" minutes. Instead of using a calculator, you could download your usage into an Excel spreadsheet and then sort them by area code. Seems to be an easier way than adding up each individual call. Good luck.

  • Can't get any response from HttpsURLConnection

    sorry, i've reformat the code here again
    Deal frens,
    Currently i'm doing a code to get a response from https link in my servlet. I don't know where the lack of my coding, but i don't get any response from the server when i execute my code. here is my code
    import java.io.*;
    import java.net.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import javax.net.ssl.*;
    public class Servlet1 extends HttpServlet {
      private static final String CONTENT_TYPE = "text/html";
      //Initialize global variables
      public void init() throws ServletException {
      //Process the HTTP Get request
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        response.setContentType(CONTENT_TYPE);
        PrintWriter out = response.getWriter();
        String authentURL = "https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db";
        out.println("<html>");
        out.println("<head><title>Servlet1</title></head>");
        URL url = new URL(authentURL);
        HttpsURLConnection URLconn = (HttpsURLConnection) url.openConnection();
       // HttpsURLConnection conn = null;
        URLconn.setDoInput(true);
        URLconn.setDoOutput(true);
        URLconn.setRequestMethod("GET");
        URLconn.setUseCaches(false);
        OutputStream authOut = URLconn.getOutputStream();
        BufferedReader reader = new BufferedReader(new InputStreamReader(URLconn.getInputStream()));
        out.println("<body bgcolor=\"#ffffff\">");
        out.println("<p>The servlet has received a GET. This is the reply.</p>");
        out.println("output"+authOut);
        out.println("output2"+URLconn.getContent().toString());
        out.println("output3"+reader);
        out.println("</body></html>");
      //Clean up resources
      public void destroy() {
    } the result suppose i get when i execute the script is..
    userdata=234&uname=00032a0183db&concurrentlogins=1
    i don't have any problem when i paste the link
    https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db
    and i able to get the response
    userdata=234&uname=00032a0183db&concurrentlogins=1
    please..please help..what is wrong with my code

    YOU DON'T READ ANYTHING IN YOUR CURRENT CODE !!!
    If you use a BufferedReader, then read the input stream via readLine() method.
    Default implementation of getContent() method is not generally usable for getting your desired "content". Experiment that.

  • I am currently on a plan with my parents, but my two years is up and I am due for an upgrade. My plan was to drop from my parents plan and join my fiancee's. Will I be able to get a discounted phone, and keep my existing number?

    I am currently on a plan with my parents, but my two years is up and I am due for an upgrade. My plan was to drop from my parents plan and join my fiancee's. Will I be able to get a discounted phone, and keep my existing number?

    You'll need to do an Assumption of Liability. The parent that is the account owner and your boyfriend will both have to be at the store to do this. Your line is actually your parents and it will be your fiancee's once the change is made. But you should be able to get your upgrade and you definitely get to keep your number. Also depending on your fiancee's credit history there may be a security deposit required.

  • How should I go about getting my iPhone headphone jack repaired?

    So recently my headphone jack has been playing up, where it ends up with loads of static and the vocals are oddly quiet and echoey, but it seems to correct itself if I jiggle the jack around a little, which obviously must be damaging, so I've stopped doing it. I bought the phone from Carphone Warehouse in September and was wondering how I can go about getting this fixed? I didn't take out any apple care or anything, but surely I'm still covered by some sort of warranty? If not, how much will Apple charge for this to be repaired/replaced?

    The warranty is 1 year. If it's less than a year old, and there are no visible signs of damage, then it should be covered under warranty. If it is more than a year old, then you should be able to get an out of warranty replacement from Apple ($149 in the U.S. You'll have to check on the price in the UK).
    Make an appointment at the genius bar at your local Apple Store.

  • How to Override Payment Terms on "Create Response" screen

    All,
    On the Create Response screen, the payment terms are inherited from the Business Partner purchasing data.
    How do you override it?
    Regards,
    Greg

    Hi sam
    Payment term not transfered to R3
    check this thread
    now i dont have a system to check on ecs po
    but he has edited the payterm
    but it is a piece of data which comes from vendor master.
    br
    muthu

Maybe you are looking for

  • 4.2 theme 26 issues

    Hi Theme 26 has the following issues 1. In 2 level tab the parent tabs are not visible 2. show hide region show hide button is not working 3.Feedback link not available in printer friendly page

  • How to monitor performance in Read Only data base

    Hi, We have a read only database that is using us to run reports against it. 1. How can i monitor performance in this read Only database ? If i cant run statspack , how can i know what happened last hour for example in the database ? 2. I use the gla

  • How to synch PDF books in iTunes with iBooks on iPhone

    How to synch PDF books in iTunes with iBooks on iPhone? I am running current apps on all (PC with windows 7) When I sysnc my iphone the  PDF books in iTunes do not show up in the iBook library. I see no place to configure the sync of books as some tu

  • Ldaplist error

    Fresh install DS 5.2. ldaplist command is giving this error: ldaplist: LDAP configuration problem (Unable to load configuration '/var/ldap/ldap_client_file' ('').) What could be the problem?

  • Duplicate name found in Anayze File:

    Getting errors the last few days: Duplicate name found in Anayze File: MS10-060 2265906 983583 983588 983589 Security Update for .NET Framework 2.0 SP2 and 3.5 SP1 Is SR the only way to have it fixed ?