BIEE 11.1.1.5 on Windows 7 64 bit - Error

Hi,
Is BIEE 11.1.1.5 certified on Windows 7, 64 bit. I tried to install it today, and installation failed with following error on configuration page:
Any ideas, or workaround?
Thanks !
[2011-05-06T23:33:42.608-05:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000Iz7ETNo9Dgd5Tf1Fic1Dl4Wg00000F,0]
[2011-05-06T23:33:42.610-05:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000Iz7ETNo9Dgd5Tf1Fic1Dl4Wg00000F,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-05-06T23:33:42.614-05:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000Iz7ETNo9Dgd5Tf1Fic1Dl4Wg00000F,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
]]

Not certified on Windows 7 64 bits according to http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
look for "System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1"
Edited by: fiston on May 7, 2011 11:00 AM

Similar Messages

6.5 install on windows vista 64 bit error USR0057

We can install v6.5 on a windows vista 32 bit, however, on a windows vista 64 bit we are getting the following error..."USR0057"
Defalut installed under the x86 file location, how can we get BO to load on the non x86 file location (simple under program files)
Thanks for the help!

hi
the point is that even if you get this somehow to work your customer will work with a version which is no longer supported in a an environment which was NEVER supported.Your customer must be aware of the risks that result from such a decision.
I would recommend either to upgrade your BO version or to downgrade the windows clients.a solution maybe a terminal server installation of the bo client.
sorry that i cannot provide you with a solution but you have to be aware of the risks you are facing.
regards
stratos

Spartan 3E with Labview 2012 (32 bit) on WIndows 7 64-bit - Error Code: -310602 NI-COBS: Unable to communicate with device over communication cable.

Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.

Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.

I have no sound on dv8000. Moved to Windows 7 64 bit. (error messaged;No media controller's)

I have no sound on dv8000. Moved to Windows 7 64 bit. Windows XP was on very shaky ground (error messaged-No multi media controller's). Also, need mass storage controller driver. Where can I obtain the compatible drivers. It would be nice if HP did not abandon some of their products as they did this one. Finally, can I add 2gigs DDR 333 (pc2700 2.5 cas) instead of the 512 megs I have now. I will be grateful for any help.~~~~Cuba T

Don't blame HP....Conexant didn't develop 64 bit drivers for their audio chip.
If you want to run W7 on that model, it will have to be 32 bit. Then you use the Vista 32 bit audio driver--probably have to manually install it too.
After you make the switch, install this card reader driver for the mass storage controller.
It will also work on W7 64 bit but without any audio, I don't see the point.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&sp...

HP Deskjet Ink Advantage 5525 - Unsuccessful installation for Windows 7 64-bit - Error 5

Hi,
during installation of HP drivers and software to Windows 7 64-bit I receive Error -5 - Installation unsuccessful - Unable to install HP monitor... I've download new software from HP webpage, but received same error.
Could you please guide me trough this problem.
Regards, Max.

Hi @MaxN ,
I see that you are getting a "error 5" when trying to install the printer software. I would like to help you out today.
I would run the SFC on the computer to repair any damaged or corrupt windows files.
Scannow to Repair Protected Windows Operating System Files.
Right click on the installer and "Run as Administrator.
If the issue persists, create a new Administrator Account and run the install from there.
User Accounts in Windows 7.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

HP Scanjet G4050 in Windows 7 (64 bit) Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]

HP Scanjet G4050 does not get well installed in Windows 7 (64 bit).
Running the programme "HP Print and Scan Doctor". Result: Errors translated for you from Dutch, so I do not have the original error formulation:
Device control: correct
Warning in Control Driverprogramme "There is no communication between the driver and the device.
Windows (WIA)-scan: correct
Warning in HP Twain Scan Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]
Register: correct
Warning in HP Scan Flow Manager: part of the software is not installed. Uninstalling (even deep uninstalling) and reinstallation of the drivers and software does not change the results.
Prepanel testing: Everything is allright with your scanner ,although not all tests could be performed.
You can scan with Microsoft Paint.
In addition:
Firewall off - did not help.
Deep uninstallation and reinstallation: did not help.
Is there anybody with an idea about how to identify and obtain the missing elements in my downloads?

In addition:
When checking the installed files, there is nothing called "SolutionCenter".

OBIEE 11g on Windows 7 64 bit - Error while configuring????

Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DK

Hi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks

Windows 7 64-bit Error -1856

I'm running Windows 7 64-bit with QuickTime 7.6.9 installed. Whenever I try to open a QuickTime movie (.mov) I get a "Error -1856: an unknown error occurred". This seems to be a permissions issue because I can get QuickTime Player to open the file if I launch QuickTime Player as an Administrator. Is there a fix for this issue? Please don't say turn UAC off
I encountered this issue with a QuickTime update back in May or so of this year and every QuickTime update to-date results in the same error.

Unfortunately, running as admin is a workaround, not a fix. If quicktime is attempted to be called by 3rd party apps (not itunes) quicktime fails. And since the EXE isn't directly called, the "running as admin" workaround doesn't work.
Many thanks for the heads up ... which sorts of third party applications are you getting that with? Adobe Creative Suite, for example?
Another possible workaround is to run QuickTime normally in a different Windows user account on the PC. (That can dodge the troublesome ACLs causing the trouble in the usual user account.)
So by extension, if you run the third-party app in a different user account (in which QuickTime isn't getting the 1856), does that get you past the QuickTime failure?

CUEAC 9.1 Client install on Windows 7 32-bit error 1603

Not sure what is wrong here….
I am installing CUEAC (client) on Windows 7 32-bit. Is some dependency missing/rights?

Based on data sheet, it is supported, and I have installed it before:
• 2.0 GHz Pentium 4 processor
• 1 GB RAM
• 1 GB available hard disk space
• Network card, connected to the network using TCP/IP
• SVGA (1024 x 768) display card
• Sound card and speakers (highly recommended)
• 17-inch or larger monitor (highly recommended)
• Keyboard with 10-key number pad
• Windows 7 (32-bit or WoW64), Vista Professional with SP2 (32-bit or WoW64), or Windows XP Professional with SP2
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7282/data_sheet_c78-520987.html
You may need to look through the install log for clues on what is failing.
Chris

Adobe 10, Windows 7 32 bit error message: You do not have priveledges to perform this command

In Windows 7 32 bit system Adobe X, latest version, results in this error message: You do not have privileges to perform this command. Windows trouble shooter indicates that the program is not compatible with my system settings. What needs to change?

I don't see an answer for this question - but I'm experiencing the same error on a Windows 7 SP1 machine. I've tried all the suggested steps here (uninstalled, reinstalled, removed Adobe Reader folder). Even installed recent v11 hoping that would allow me to open a PDF as the original problem exhibited itself on a v10.1.4 installation. This is a brand new machine running local administrator user. Shouldn't be a rights issue yet Adobe reports that I don't have privileges to run (open) Adobe reader.
I'd rather use the Adobe reader (rather than Foxit or another) but if I can't get it to install correctly I'm out of luck. Anyone get this issue resolved?
BTW: Tried to insert a picture of the error message dialogue but the Adobe picture uploader for this forum doesn't appear to work either...
Russ

Windows 8 (64 bit) error/crash:DRIVER_IRQL_NOT_LESS_OR_EQUAL (NETIO.SYS)

Hi,
I bought a new computer with Windows 8 (64 Bit) in April/May 2013 and it has recently started crashing within the last week. The error message that pops up every time is the same. It is on a blue screen and says:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL (NETIO.SYS)"
Can someone please explain what I need to do to fix this?
I've read that it can be antiviruses such as Avast, however I am currently running Vipre. (I have Avira installed still, but disabled while I complete the trial of Vipre)
Any help would be *greatly* appreciated!
Thank you!

CH
These were Related to NETwew00.sys Intel® Wireless WiFi Link Driver from Intel Corporation. I would install the newest driver available.
2: kd>
Irp is active with 5 stacks 3 is current (= 0xffffe0000af33ce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 ffffe0000221a050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwew00.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwew00.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwew00.sys
\Driver\NETwNe64
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 ffffe00001a01e20 00000000 fffff8009dbd6054-ffffe0000b5e7b10 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0000b5e7b10
Args: 00000000 00000000 00000000 00000000
Wanikiya and Dyami--Team Zigzag

ITunes won't install on Windows Vista 64-bit : Error Message

I got my dad an iPod Mini for Christmas. I've been trying to install iTunes onto his computer so that he can download music and all that stuff on his own. It is not downloading for me. Quicktime downloads, but I get an error for iTunes.
"An error occurred during the installation of assembly "Microsoft.VC80.CRT, version="80.50727.4053", type="win32", publicKeyToken="1fc8b3b9a1e8e3b", process or Architecture="x86"."
His system specs are as follows.
Windows Vista Home Premium
AMD Phenom 9150e Quad-Core Processor 1.80GHz
4.00 GB RAM
NVIDIA GeForce 6150SE nForce 430
64-bit Operating System
Can anyone tell me what I'm doing wrong or how to fix it. iTunes has never been installed on his computer before. I'd really like to get this up and running soon. Any help would be greatly appreciated. Thanks.

80070424
Accck. Have you checked to see if you've got a broken Windows Modules Installer, ral? See the following thread for troubleshooting advice for that possibility:
http://discussions.apple.com/thread.jspa?messageID=10847979&#10847979
Message was edited by: b noir

ITunes 10.5 for windows vista 64 bits - error

I've been trying to install itunes 10.5 since december and even after the newer versions were out i've been having the same problem.
An error occur:
An error occurred during installation of assembly
'Microsoft.VC80.CRT type="Win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b",process
orArchitecture='x86'. Please refer to Help and
Support for more information. HRESULT: 0x80070002
Then I have to cancel it. Then shows: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127).
I was told to scan the PC, uninstall and reinstall all apple programs, or uninstall from the highest version to the lowest version and reinstall in chronological order.
But no version of itunes 10.5 works. Not even the newest version at: http://support.apple.com/kb/DL1427?viewlocale=pt_BR works.
Only the 10.4 version I had before can work, and now my iphone has iOS 5.0 and i cant use my itunes.
Any new ideas?

Its a Issue with your C++ Library on your computer, a way to fix it is to Rebuild your entire C++ Library from uninstalling the highest version to the lowest verision and reinstalling them back in chronological order..
I would suggest to contact apple support, request a Senior advisor they should be able to get that squared away, now if your not in phone support period you will probably have to pay for support.
I'd suggest the apple care if you havent got it yet

Ricoh Aficio MP C2051 Scan to Folder - Windows 7 64 bit Error: Authentication with the destination has failed check settings

I got an issue with OS of widows 7.
unable to scan documents to user's PC.am getting error message "Authentication with the destination has failed. Check settings. To check the current status, press [Scanned Files Status
Other Windows xp PC can do this.
How can I fix this problem?
Printer Model :C2051 /mp2001sp

Hi,
I searched for the error and it is mentioned in Ricoh's website:
Messages Displayed on the Control Panel When Using the Scanner Function
http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001045/0001045718/view/trouble/int/0036.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Message
Cause
Solution
“Authentication with the destination has failed. Check settings. To check the current status, press [Comm. Status/Print].”
The entered login user name or login password is not correct.
Check that the user name and password are correct.
Check that the ID and password for the destination folder are correct.
A password of 128 or more characters may not be recognized.
From the solution, it mentioned that the issue could relate to user account or its password.
Please let me know if it is in domain environment. If so, please test to log the same user account currently on Windows 7 to Windows XP and see if issue persists.
Also please test to directly access the scanning folder on printer server to see if there is any issue in accessing the destination folder.

BIEE 11.1.1.5 on Windows 7 64 bit - Error

Similar Messages

Maybe you are looking for