Biee 11g analytics gauge properties can not be modified

When I modify the gauge properties and click ok button,the ie prompt a message are you want to leave this page?
I have take a screenshot.
https://plus.google.com/photos/104883960983079196167/albums/5728167397091283025?authkey=CPHNtLTmytWRmAE
why the analytics gauge properties can not be modified?
By the way,I still encounter a problem sometimes the analytics can not be log in.It is very strange.I ensure the username and password is correct.
I had try to restart presentation sevice,it don't work.
Edited by: 921606 on Apr 5, 2012 11:48 PM

Hi user,
Thanks for the information you provided it would be useful
Check this links http://forums.oracle.com/forums/thread.jspa?threadID=1518428&tstart=105
http://www.skurabigroup.com/blog/?p=49
I think it might be abug as there are many bugs in 11g ,If still problem persists raise a SR with oracle to clarify even with your previous post.
Hope it helps you.
By,
KK

Similar Messages

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

Why Does Disk Utility Say "This Partition Can Not Be Modified"

I've got an external drive with three partitions. I want to expand the first partition. (It's a backup of my internal drive and it isn't big enough anymore.)
All partitions are Journaled. All verify okay. The disk's partition map is GUID.
Disk utility will change the size of the 2nd and 3rd partition, but when I click on the first partition, the one I want to expand, it says "This partition can not be modified."
I've tried making another partition smaller, but that doesn't help.
Does anyone know why? Or what I can do about it? (Can I delete that partition, make another one smaller and then create a new bigger one?)
Many thanks in advance.
Steve

Thanks, guys.
I ended up taking one of the existing partitions, making it smaller and then adding a partition of the size I needed -- created out of the space freed up. I also erased the original partition that I couldn't change and Disk Utility now says I can make it smaller, but not bigger.
Bottom line in my case -- all partitions except the first could be made smaller. But none could be made larger. (Maybe the first one couldn't be made smaller because it was full?). That caveat -- 'you can make 'em smaller but not larger' -- is not mentioned in the help file, but that's what I saw.
Make sense?
Thanks again,
Steve

Outputs can not be modified from the Interrupt VI !!

Hi,
I was trying to use the timer1 interrupt to see how does it works. I activated the timer1 interrupt from interrupt manager screen and enabled the interrupt including the glibal interrupt enable. then i added a new VI to the project to use it as the interrupt service routine. i addeda global variable and i can modify the global variable from my interrupt VI. so far everything works good. but as soon as i add some simple code to modify the output bits of the MCB2300 (LED0 to LED7) it gives me some error. it builds the project, I can download it to the board but after running it stops the processor and gives some error. If I copy and past the same code from my interrupt VI to the main VI it works without any problem.
any idea why it reacts like this?
why I can not modify any outputs from my interrupt VI?
Besrt regards

You should be able to just check a box named "Use thread" on the interrupt manager page. Note that this option does add latency.
Here is the doc on the interrupt manager page:
http://zone.ni.com/reference/en-XX/help/372459C-01/lvembdialog/arm_int_mgr_page_db/

HT202796 I can not copy, modify, any file from my Mac to external hard disk, of the seagate brand (fast HDD Portable Drive) I don´t know if I need some software to copy and modify files in my hard disk external ? Could you help me please?

Hello I have a iMac with 3.4 GHZ intel core I7, memory 16 GB 1333 MHZ DDR3, and OS X 10.9.4 Software.
I have problems when I try to copy or modify any file from my MAC to MY PORTABLE DRIVE/DISQUE (external hard disk).
my external hard disk have the next features:
brand: Seagate
4TB
I do not know if I need some software such as: paragon or I need to configure my MAC,
Please help me..
Thanks a lot

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(110769)

Why copies can not be modified under vista?

today, I opened a document that built by Adobe InDesign CS2, and attended to print it, when I clicked "File/Print/Setup...", then pop a windows print dialog, I set "Number of Copies" to 3, but when I return inDesign CS2 print dialog, the Copies is 1, not 3, the OS is Vista. why?
thanks.

same driver, same windows print dialog, OS WindowsXP, it is OK; but OS Vista, it is not incorrect. Vista bug or indesign CS2 about printing is incompatible with OS Vista?
thanks

BIEE 11G can not connect to Essbase11G

Dear all:
When I try to make a connection between BIEE 11G and Essbase 11G thruogh Oracle BI Administration tool interface. Afrer iinserting connection information, there is an error showed "fail to connect" immediately. It looks like that BIEE have not tried connect to Essbase yet. Could any one help me on this?
Many Thanks,

Hi,
Go through this....might help you...OBIEE 11g - Essbase connection Failed
Regards,
Srikanth

OBIEE 11g, can not signin analytics with user admin "Weblogic"?

Hi all,
I have a problem as i can not signin analytic with user Weblogic, with error "An error occurred during authentication. Try again later or contact your system administrator".
then, i create one user other, with admin privilege and sign in ok, same with all other user.
Before i get this problem, i have create one user --> add to a role --> grant permission of some analytic on weblogic folder to this user.
plz tell me what the reason of this problem.
Thanks so much.

From Srini's update i see its a bug, but can you give it a try with the below options and also let us know the OBIEE Version?
try to shutdown everything admin,managed and opmn services and then restart everything once everything is up now deploy the old rpd and see if it helps
paste the log files from admin and nqserver.log

Can't login to obiee 11g analytics

Hi Guys,
Client has installed obiee 11g in a server sitting at different place. We have deployed our own repository and catalog. Now we can't login to obiee analytics. It does not accept any username or password created in weblogic console. But if we deploy oracle's default SampleSales repository, then we could login. Can't understand what's the problem!
It's throwing the following error:
[OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.searchidentities] [ecid: 004tnN1tfkXFw0XpLs_Aie0004ds000000,0:162] [tid: 3327710976] Error retrieving user/group data from Oracle BI Server's User Population API.
Unable to create a system user connection to BI Server while running user population queries
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (aaobiee.mm.co.za) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:726
Location:
        saw.security.odbcuserpopulationimpl.searchidentities
        saw.security.userpopulationmanagerimpl.searchidentities
        saw.catalog.dirCache.getAllSharedFolders
        saw.CatalogAttributes.cache.cleanup
        saw.taskScheduler.processJob
        taskscheduler
        saw.threads
ecid: 004tnN1tfkXFw0XpLs_Aie0004ds000000,0:162
ThreadID: 3327710976
task: Cache/CatalogAttributes
Please help how do I resolve!!
Thanks,
BK.

Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = cap2)
thanks,
BK.

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

My printer properties will not open after I downloaded firefox 4.0. I can print, but only in the normal mode.

I can not open properties to select a fast draft copy. The printer works normally in internet explorer. I had to reload firefox 3.6 to have it work. It is a dell printer 960.

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Firefox 4 requires at least OS X 10.5

I have a problem in this email I can not download any program I do not know why I hope gauged reason and rapid response and thank you

I have a problem in this email I can not download any program I do not know why I hope gauged reason and rapid response and thank you

We're going to need more, clear information.
I'm not sure what email has to do with it, but are you having trouble downloading programs?
If so, what are you trying to download and what happens when you try?

Oim 11g can not install connector

Hi All,
i have installed oim 11G.
trying to install the dbum connector,
according to the manual, I have copied all the installation files and directories to OIM_HOME/server/ConnectorDefaultDirectory
but when I press the install connector on the oim admin console, the window opens ...but i can not see any connector in the LOV ,
meaning i can not install the connector, even tried bouncing the WL and OIM , not much help.
does any of you know of some error alike? / solution ?
(with v9 of oim I did nit have any problem with the same) .
Cheers
S.

Off-course it works, make sure the folder structure is correct.
*/ConnectorDefaultDirectory/<Connector-Installation-Media-Parent-Folder>/*
Now all the connector folder should be directly in there like configuration, lib etc

The target element was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search

Hi All,
I am using CUIT to write automated UI test cases. I have a dialog containing few edit control and buttons.
While running the test it is able to click the button.
However I am getting few warnings as below.
The target element "Technology Name: 'MSAA';Search Configuration: 'VisibleOnly'; Search Properties - ControlType : 'Button',Name : 'OK'" was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target
element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search properties.
Technology Name: 'MSAA'
Search Configuration: 'VisibleOnly'
Search Properties -
ControlType : 'Button'
Name : 'OK'
Mouse button : 'Left'
I need to resolve these warning. Can anybody suggest me how to resolve these warnings.

Hi sanjay_t,
From these warning message as you provide, I doubt that maybe the button control did not be found successfully by the searchproperties when you playback the Coded UI test.
So I suggest you can try to use DrawHighlight Method to check if the button control
is found before you perform actions on the button target control.
(2)I suggest you can try to use
FindMatchingControls Method on the button control to check if there are more than one control which matches the specified searchproperties and filterproperties.
In addition, as you said that you are using CUIT to write automated UI test. it means that you record the UI action by handing code, am I right?
If yes, I suggest that you can create a simple coded UI test through recording actions using Coded UI Test Builder. Then
generate the code and then try to playback. If playback succeeds, then cross check the properties from UIMap.Designer.cs file. You can reference the code about entering values in the text edit in the UIMap.Designer.cs file to write
your own code.
For more information about how to find a control for coded UI test, I suggest you can refer the following blog.
http://blogs.msdn.com/b/balagans/archive/2009/12/28/9941582.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can not set remote error true in reporting service's properties's advanced

can not set remote error true in reporting service's properties's advanced
美斯: 唔理幾多個皇上啦, 個波呢家係皇上果度!!!

Hello,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Are you get some error messages when you set EnableRemoteErrors to true? Or do you mean that it doesn’t
throw error message to us, but the property is useless? And could you tell me the edition of your SQL Server?
It is benefit for us to do further analysis. Thank you for your understanding.
The following document may help you:
http://technet.microsoft.com/en-us/library/aa337165(v=sql.110).aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Biee 11g analytics gauge properties can not be modified

Similar Messages

Maybe you are looking for