Big Delay. Very Low Starting 2005 PL08

Hi!!
Last Week, Tuesday, I Upgraded my B1 2004 pl23 to the B1 2005 PL 08, because tomorrow I've got a webex for the Ramp-up of the SP01.
Actually my partner solved the problems with the addon's but we still have problems when we start SB1 2005, it's last around 2 or 3 minutes to start and another 2 or 3 minutes to start the ALD addons. We have this delay just in the client PC, nor in the server. And this happens like I said, when I start the aplication or when I changes the companys. It's seem to have a lot of work in the net. Could be a problem with the license server? Or a problem with Corba?
Always when one of the clients stars (we have SB1 in just to PC's), it's show a message that said: 'The addons version need to ugrade the database. Upgrade of database maid to version 6.80.1.1'.
But the addons are all versions 6.80.0.xx.
Please Try to help, cause It's so tedious.
Thanks
Paco Rojas.
Almeria

Hi Paco,
I am sorry for not answering your question, but I just want to tell you that we are having the same problem on SBO 2005 PL 06. It is working 100% at another client, but at one client it is (as you say) fast on the server and very slow (2-3 minutes) to open SBO (after login) until the main menu shows. I have also done some tests and it does exactly the same if there are no add-ons installed.
Hope it helps,
Adele

Similar Messages

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

Trouble starting ipod (very low battery message) and loop

Hello. I am having troble to start my ipod classic 5 generation. The message "please wait very low battery" (with an ipod with sad face) appears but the weird thing is that i just used it yesterday and i left it fully charged...but well. Then i try to charge the battery with a wall charger but it starts on a loop passing from the black screen with the apple logo, then it goes to the message "go to itunes/ipod/support" web site. and then it says again "please wait very low battery" just for a second and then it goes back to the black screen with apple logo and does this again and again. Then i tried to connect my ipod to the computer, after i do this it shows the message "please wait very low battery" and stays like this forever. I have tried ALL the suggestions, from trying to restart the ipod by clicking the middle button and the menu button at the same time (several times) and then clicking the middle button and the play button so it gows to the disk ode and nothing. I tryed witting it on the right corner and nothing. I already tested 3 usb different cables and nothing. It is not my usb port (i made tests with an ipod touch i have and works fine). Daaaaaaaaaarn!!! I really dont know waht to do now.
Any advises please!!!!?
Thanks a lot!
Rick

Have you seen these articles?
iPod displays a folder icon with an exclamation point
iPod displays a sad iPod icon
Also, here's s very good post about the sad iPod icon and/or exclamation point and folder:
Mitch: Exclamation point and folder and nothing else!
-Kylene

HT4623 My ringer and music volume is very low!! The problem just started today can someone help?

Can someone one help me, I just started having problems with my volume. My music and my ringtone are very low!

As a first step, do a hard reset by holding down Sleep/Wake and Home buttons until you see the Apple logo on the screen. If a red power slider appears on the screen, just ignore it and keep holding the buttons down until you see the Apple logo.

I cannot connect to the internet. my i touch tries to log me on as a guest. We have our on wi fii. This started when my battery ran very low and I recharged it.

I cannot connect to the internet. my i touch tries to log me on as a guest. We have our on wi fii. This started when my battery ran very low and I recharged it.

Try:
- Resetting the iPOd. Noting will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- Reset network settings: Setings>General>Reset>Reset Network Settings

I can't get my ipad 2 start up, all i am getting is a very low light like the background linght

I can't get my ipad 2 start up, all i am getting is a very low light like the background linght I tried to push and hold the suspended botton and the on/off butum no good
any one have a solution please

Hold home button + power button until it turns off, continue to hold until the Apple logo shows (you can let go now).

Kdm big delay with Xorg 7 & Nvidia

I just made a fresh install ( my first actually) with the latest Arch including XORG 7 m the Nvidia binary driver and KDE 3.5.1 .
Everything works , I'm very impressed with the Arch boot speed but there's a really big problem with KDM starting . There's a huge lag , a delay between X starting and seeing the Nvidia splash screen and KDM appearing on the desktop .
It seems to load something from the harddrive but I don't think it should take that long . I previously never had this problem with KDE in Gentoo , Kubuntu or PCLOS ( but didn't try it with KDE 3.5.1 and Xorg 7 though ) ,
Any ideas ?
P.S. KDM log :
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15-ARCH i686
Current Operating System: Linux myhost 2.6.15-ARCH #1 SMP PREEMPT Sun Feb 12 18:36:42 CET 2006 i686
Build Date: 18 February 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 4 02:38:41 2006
(==) Using config file: "/etc/X11/xorg.conf"
Could not init font path element /usr/share/fonts/TTF, removing from list!
kdmgreet: WARNING: KLocale: trying to look up "" in catalog. Fix the program
QSettings: error creating /tmp/2045135864/.qt
QSettings: failed to open file '/tmp/2045135864/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty
QSettings: error creating /tmp/2045135864/.qt
QSettings: failed to open file '/tmp/2045135864/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty
QSettings: error creating /tmp/2045135864/.qt
QSettings: failed to open file '/tmp/2045135864/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty

I checked and yes DMA is on and the mode seems to be udma6 :
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Maybe this is just normal because I see that when I restart the X server without rebooting everything happens much faster ( probably takes everything from RAM ) .
Still I don't really like and I'm wondering if I can't somehow speed it up .
Could it have something to do with the fonts or the font server . Hope I'm not talking nonsense here .
I find it very odd that it now takes that much to start x but maybe it's just because Arch boots up so fast .
Here's a bootchart maybe it will make things clearer because I didn't understand too much from it :

DVR replay on the non-DVR STB - very low quality

I started recording a football game on the DVR, and about 45 minutes later I began to watch it on the non-DVR setbox in another room. The quality is very low: every 10 seconds (almost exactly) the picture gets very choppy, stops and starts.
On the DVR itself, the replay is good.
Is this a known problem with the STB?

Have you attempted re-booting both STBs?

I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro.

I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro (8 Core 2.93GHz). When I run the Mac Pro with 2 x 2Gb RAM it takes 4 seconds before the gray screen, chime and spinning wheel appear.However when I expand the RAM to 20GB the grey screen and chimes appear after a long 20+ second black screen.
The RAM modules are paored 2 x 4GB Crucial CT51272BA1339.M18FMR and 6 x 2GB SAMSUNG M391B5673FH0-CH9, all DDR3 ECC.
Reading articles on the internet, I thought it may be damaged RAM modules, but I have completed memtest and all are okay. I have tried changing the pairs around and if I use any paired 2 modules the Mac Pro starts normally, only when I try running more than 2 modules the delayed start up happens. (black screen 20 Seconds)
I also have tried PRAM and SMU resets after changing the RAM setups, and the issues always occurs when I have more than 2 modules. As you can see I have 6 SAMSUNG modules and even with identical modules the issue happens, when increasing the RAM to more than 2 modules.
The Mac Pro runs fine after the start up screen and can see all the modules, but has anyone else come across this issue, or have any ideas as to why my Mac Pro is taking 20 seconds to start up with 20 GB RAM?

Hi there. Thanks for your comments.
I have tried all the different combinations of RAM setup, and as stated in my initial topic, the Mac Pro boot up time only slows when I have more that 2 modules. Where I place these does not seem to make a difference.
I have taken the Mac Pro to an Apple Reseller technician yesterday and they where not able to find any RAM errors. Apparently the boot up time is within Apple's acceptable parameters for this set up.
Could anyone that is running a Mac Pro 2009 with more that 4 modules of RAM, please let me know if the boot up time is normal. ( the time it takes from pressing the power button to seeing the gray screen around 16 - 20 seconds)
Or is anyone else having the same issues?
thanks for your responce

Volume on iphone is very low, this is a common problem, Apple Needs to FIX!

I have a new iphone 3GS that I got at the end of July, 2009. Since then i've been having problems with the volume! I called support because i had this problem along with my screen turning blank and freezing up. Support said to take the case off and this might help. well it did help the screen issue (which is kind of dumb when you think about it because the case is supposed to protect the phone and instead it caused it to malfunction!!,wierd), but the volume issue never really changed. I am hearing impaired and I do wear hearing aids, BUT....I have ALWAYS been able to use cell phones that have good loud volume, as i need to remove my aids to use the phone. My LG phone had BEAUTIFUL volume, never had a problem!
So, then I started to do some research and saw this is a very common problem! everyone I know that has an iphone has this problem, and all these people are normal hearing people! So then i decided to just get some really good, superduper headphones, because the headphones that came with the phone were ok, but i had to hold them in my ears.
The other day i bought the new Bose in-ear headphones with superior sound quality and at $130 bucks, they better be and the are compatable with the iphone. But.....again, while actually talking to someone on the phone the sound, even with the headphones and all volumes max'd, was still very low!! and i know its not the headphones because listening to the ipod is fantastic! it must be the phone!!!
I even used the "accessibility" setting that is on the phone and selected the mono audio feature which pushes both L&R sounds through one channel, and still doesnt help!
I even called support back today and one guy said i had to "restore" my phone by plugging it into my computer (not really sure what he means) but we got disconnected and the other guy said that i should bring my phone into the apple store. Both tech guys denied that there are lots of calls or complaints about this....but as you all know from reading the many posts, that this is a very common problem!!!
I think Apple should do the right thing and recall these phones or at least fix them or SOMETHING!!!! this volume issue is internally, because when i make a call and an automated voice comes on, it works fine (majority of the time) but as soon as a live voice comes on the phone, the volume drops! there must be some type of automatic voice adjuster that is just not working properly. I mean i love my phone!!! But....i cant use it!!! And now, im going to have to return my Bose headphones and try to find something else.
Can anyone really help me?????

stewa348 wrote:
I agree with you about the volume on the phone itself. (I have 3Gs). It needs to be louder. I also wear hearing aids. However I do think there may be something wrong with your phone because when I connect my earbuds (Klipsh) I get very good volume through them. In fact at full volume it's way too loud. I would push for a replacement phone.
FWIW, my daughter (who also wears hearing aids) has trouble hearing her iphone. It appears to have more to do with the speaker not being lined up with the hearing aid's input. Her audiologist pointed out that some current hearing aids support bluetooth, I think we will get those next time we replace her hearing aids.

Could Very Low Disk Space Cause problems?

Hi, my 600 GB Hard Drive only had around 5 GB of space left . I purchased a new 1 TB Hard Drive in order to delete media so that I could gain the space back. I've since gained back 200 GB of Space but Could very low disk space cause issues? What kind of issues could occur? Thanks
Message was edited by: Stuart Lawrence

There are any number of reasons for occasional beachballs to appear. They will appear when some programs are involved in heavy disk I/O which tends to be processor dependent and causes the program to suspend all other activity until the disk activity has completed. This is more often the case when writing to the disk. Beachballs may also appear if the OS has to use disk I/O and is slowed down by an over-filled and/or fragmented hard drive. The fuller a drive gets the greater the likelihood that fragmentation will become a more noticeable problem. Beachballs can appear if you are low on physical memory so applications must resort to disk-based virtual memory which is considerably slower and tends to cause the computer to become slow or unresponsive for a period of time. It can also cause disk-thrashing. Beachballs can occur if the disk has become corrupted causing applications to have difficulty reading from or writing to the disk.
It is possible to repair a drive's directory, and it's even possible to identify corrupted files, but it's not possible to repair corrupted files nor repair a corrupted drive. If a drive develops corrupted files either the files will need to be replaced or deleted. If a drive develops soft sector errors these can be repaired by erasing the drive (reformatting.) If a drive develops hard sector errors these may or may not be repairable, but if they are repairable it requires zeroing the data during a disk formatting operation. If the disk directory becomes corrupted that can be repaired using Disk Utility or one of the various third-party utilities such as Disk Warrior. Disk Utility can repair many but not all directory corruption problems. What DU cannot fix Disk Warrior usually can.
You can start repairing a drive as follows;
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
This applies to your startup volume. No need to repair permissions on any but a startup volume.

Primary (internal battery) 601 very low how to correct this

Primary (internal battery) 601 very low how to correct this my model no is HP pavilion g4 its g series

Hi,
Pleae try the following test. If failed you have to replace the battery (the main, big battery which powers the laptop):
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[linux 3.0] Problem with sound : very low.

Since I upgraded to linux 3.0, I noticed that sound is very very low. Even if gnome sound properties tells me it is set at 100%, I nearly cannot hear it at all.
I got this in dmesg | tail :
[fred@fredo-arch ~]$ dmesg | tail
[ 10.943927] NET: Registered protocol family 31
[ 10.943932] Bluetooth: HCI device and connection manager initialized
[ 10.943940] Bluetooth: HCI socket layer initialized
[ 10.943943] Bluetooth: L2CAP socket layer initialized
[ 10.944041] Bluetooth: SCO socket layer initialized
[ 10.981755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.925726] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 20.203365] eth0: no IPv6 routers present
[ 22.618181] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 22.755787] EXT4-fs (sda5): re-mounted. Opts: commit=0
If I plug an headset in the front on my PC, I got sound with the right power. Weird. Any tips ?

same here. almost no sound at all (unless you have superman ears).
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
sounds like a alsa problem?
Edit:
This fixed it:
I closed kde's mixer then I opened alsamixer. I selected Master channel and pressed M on my keyboard to unmute.
then I did "/etc/rc.d/alsa stop" to save the sound volume status. and then "/etc/rc.d/alsa start" and I opened kmix again.
Last edited by hussam (2011-07-24 20:48:55)

Lion very slow starting apps with Firewire 800 drive mounted. Any ideas?

Lion very slow starting apps with Firewire 800 drive mounted.
When my Firewire 800 drive is in sleep mode, when I start up an app like MS Excel or Addressbook. I get a spining wheel and a delay before the app launches. Any ideas? Never happened in 10.6.

Long shot: What format is the drive?
Regards
TD

Big Delay. Very Low Starting 2005 PL08

Similar Messages

Maybe you are looking for