Big difference between Retina and non-Retina MacBooks on ACD?

I'm deciding between a 13" MacBook pro/retina and a 13" MacBook Air. It'll mostly be used with my 24-inch, Late 2008 (1920 x 1200) Apple Cinema display. Will I see a big difference in text clarity with the Retina Pro instead of an Air plugged into it? Thanks for any advice.

Thank you very much for the reply Geoff93......but I'm still baffled.
If what you say is so......Is BT not my ISP ?? ......(and therefore "bypassing their own congestion" to achieve better figures) ? How come other users show speedtest.net download figures of 30+ Mbs when I struggle to get more than 10 ? and still doesn't explain why my download speed is nearly always less than upload speed ?
The Openreach engineer said that according to his meter on installation I had a possible 37+ Mb down and almost 10 up....but in practice he was only getting Speedtest.net readings of around 4.5 Mbs to 11 Mbs using both wireless and/or ethernet cable and using three different computers (with three different versions of Windows) to cross check.
I had hoped (and expected from the option 2 + Anytime calls Infinity monthly agreement taken on !) that the speed of operation would have been quite noticeably faster than the old 1 Mb down / .5 Mb upload copper cable connection but it has not .....and is less reliable having dropped connection regularly last week.

Similar Messages

Creating multi-rendition (retina and non-retina) from one folio

Hi there,
We'd like to create a multi-rendition folio from a single, retina-sized set of source files. I've seen this discussed in a few places, but am not sure of the workflow. Is anyone able to point to a guide for doing this?
Thanks in advance,
Toby

Anything two years old pertaining to DPS is too old to take with anything
but a grain of salt. Things have changed dramaticallyand for the better.
When that article was written, renditions were the only way to support both
retina and non-retina devices.
Try it yourself. Create a few test articles and turn them into folios with
PNG at 1024x768, 2048x1356, and finally a PDF folio at 1024x768 and make
your own judgements.
Barring some incredibly high end need, I'm pretty confident that you'll have
a very difficult time justifying the extra work of doing renditions. But
should you have a certain graphic that you feel needs to be 144ppi you can
can create a one state image sequence using the hd/sd assets.
Finally, unless you have a pro or enterprise account, this is moot. Single
Edition apps do not support renditions. Here' a link to one I did recently:
https://itunes.apple.com/us/app/my-9-months/id528623198?mt=8
Check it out. It's done as I described above. 1024x768 PDF.

What is the programming (ABAP) difference between Unicode and non Unicode?

What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PM

Hi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez

Difference between deamons and non deamons

Pls someone tell me wat is the difference between deamons and non demons and i know that deamons will run in the background..and pls tell me why they r used...

Actually it's "daemon" (mythologically speaking a little more benign than demons).
A Java program terminates when every non-daemon thread finsihes. Setting a thread to daemon mode simply says that it's ignored for this purpose. It's usually used with background activities that can be abandoned at the end of the program without any need to clean up.
(More widely, in unix, a daemon program is one that runs in the background all the time, from when you boot up the machine to when you close it down.)

Difference between configurable and non configurable finished goods master

Hi
Pl explain the difference between configurable and non configurable finished goods master data.
Thanks
kamala

Hi,
Configurable material are used when you have a large number of combination of parts that go into a product. It means different combinations of the parts for same material. If you maintain a unique material code for each combination , you require a large number of material numbers. KMAT is used in such a case where you maintain just one generic product code. You assign class to this material having all variant characteristics.
A super BOM is maintained for such a material consisting of all possible alternatives. A super routing is also maintained consisting of all possible operations that could be used.
Typically configurable material is used in Made To Order (MTO) environment. However frequently ordered configurations may be planned with a material variant which needs to have a material master record. Thus Material variants may have stock and value. Depending upon characteristic values chosen at sales order entry Sales Order BOM is created. Routing operations are also chosen depending upon which BOM components are assigned to them.
Non configurable materials are like finish, semi finish materials having fixed BOM. A separate/single BOM exits for every finish material.
Revert back for more info.
thanks and regards,
Man

Difference between cumulative and non-cumulative key figures

Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.

Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM

Difference between stock and non stock material

what is the difference between stock and non stock material. example of stock and non stock material?

Hello,
Stock Material
Material that is constantly kept in stock .A stock material has a material master record and is managed on a value basis in a material stock account.
Ex: Raw Material.
Non-stock Material
Material that is not held in stock because it is consumed immediately.
Ex: Office Stationary.
You need to create purchase order and accounting document for payment but the stock balance is always zero as it is issued out immediately to the various department.
Prase

What is the difference between cumulative and non cumulative keyfigures?

Hi Friends
What is the difference between cumulative and non cumulative keyfigures, when we r using the cumulative and non cumulative
Regards
Ravindra

Hi Ravindra,
Have a look at the help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Go through these.
Re: Types of non-cumulative keyfigures
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
See the following threads
non-cumulatives KF in reporting
Re: use of non cumulative keyfigure
Re: When do we use Non-Cumulative values?
Key figures:
1. Cumulative Vaules
2. Non Cumulative Values
Cumulative Values:
Cumulative Values are Keyfigures for which Keyfigure Values are must posted in every time unit that reported on (= time period specific Values).
Example:
Revenue
Non Cumulative Values:
Non Cumulative Values are Keyfigures for which KeyFigures are only evaluated for selected time Periods.
Cumulative Keyfigures With Exception Aggregation:
It's a 'normal' KF (with summation, min or max as aggregation behaviour), but you set some exception in this behaviour...for example, you can say that a KF, normally aggregated by 'summation', have to show the max value (or the average, or '0' or something else), that is the 'exception aggregation' when you use it in combination with 0DOC_DATE (or other char), that is the 'exception aggregation char reference'...in this case OLAP processor give to you the possibility to see your KF with different behaviour depending from you use 0DOC_DATE (in our example, MAX) or something else (SUMMATION).
Non Cumulative keyfigure with Associated Single Delta:
If you have a stock KF that is fed from only one (other) movement KF that can assume positive and negative sign.
KF1 (initial) STOCK (non-***.) = 100
KF2 flow = -30
KF2 flow = 70
KF1 (final) STOCK (non-***.) = 140
Non-cumulative key figure with associated in and outflow:
This is the case of 2LIS_03_BF KF stocks fields.
Here, we have the same situation in point 2, but you will have not only ONE flow KF, but TWO, one dedicated to in and another one dedicated to out !
You have to use this scenario if you have no KF that have positive and negative sign, but two KFs each one representing positive (in) and negative (out) logical sign!
KF1 (initial) STOCK (non-***.) = 100
KF2 (out))flow = 30
KF3 (in)flow = 70
KF1 (final) STOCK (non-***.) = 140
Website Addresses For Non Cumulative KeyFigures:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.html
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
Check this very useful docu.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
****Assign Points If Helpful****
Regards,
Ravikanth

Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Hi, I'm from the UK and in the USA for a week. I'm thinking of purchasing an Air. Would there be a problem with the warranty in the UK if bought in the US? Plus is there a big difference between US and UK keyboards?
Cheers
G

There are subtle differences on a British layout, mainly having to do with the top line (shift numbers), to permit the use of European monetary symbols. There are a few other keys different (note the enter key).
Here are the basic layouts. Obviously the MBA won't have an eject key, as the power key resides in that location.
British English Keyboard
USA English Keyboard

Big Difference between Catalog and Nocatalog

Hi,
i´m always facing the discussion, what is the big difference between using a catalog and nocatalog
i start with the points i know. could somebody please add some points? Thanks
(+) Catalog
1. All Controlfiles could be lost (but if you have controlfile autobackup it should not be a great problem without the catalog)
2. keep forever backup (controlfiles yould only save information up to 365 days)
3. many database backups could be administrated inside the catalog (but what if yoiu want to know: which of my 100 databases are not backed up yesterday?)
4. ....?
(-) i had some crash scenarios that worked only without catalog
(-) backup of the catalog
(-) another database on another server
Thanks
Marco

Hi,
Using catalog you have the advantage to keep global RMAN script. Those scripts can be run against any of the databases registered in the catalog.
You can use following command to see the script if already written and stored in catalog:
RMAN > print script "local_script_name.rcv" ; [specific to your database and would run against your database]
RMAN > print global script "script_name.rcv"; [global script which can run on all the database registered with catalog]
Thanks
Sumit.

Difference between automatic and non-automatic page attributes

Hi,
Can anyone tell me difference between automatic page attributes and non-automatic page attributes?
and also difference between stateful and stateless mode with examples?
Thanks
Narendra

Hi Mullapudi,
If you mark a page attribute as u2018automaticu2019 (auto in the system), the attribute automatically gets its values via the calling URL or
via the navigation process from other pages.
This kind of attribute only has to be declared for one page.
It is identified by its name equivalence.
If another page uses a parameter with the same name,
at runtime that parameter automatically
gets the same values as the attribute.
Non-automatic page attributes
If you flag a page attribute as non-automatic, the attribute gets its values from the class attribute.
The visibility of page attributes when parameters are transferred between BSP pages depends on whether the navigation is explicit or implicit.
Explicit navigation
For example, if navigation->goto_page(page.htm)
Implicit navigation
With implicit navigation, the page attributes are transferred automatically from OnInputProcessing to OnInitialization, both in stateful and stateless mode.
The auto page attributes are refilled by the request, both in stateful and stateless mode.
Reward if Useful...
Regards,
Anita. B

Please recommend between Macbook pro retina and non-retina.

I need to buy Macbook pro 13 but confused between Retina & non-retina. My main use is internet browsing, watching movies, & email (movies with mainly bluray) So what would you recommend? Does the non retina plays movies (bluray) with good quality?

A BluRay movie is only 1920x1080 pixels at most. Any Mac display would show it just fine - the Retina display doesn't give you any advantage. As the previous poster pointed out, though, you need a BluRay player connected, and software from MacGo. It actually works pretty well in my experience.
http://www.macblurayplayer.com/
The Retina display is great for displaying high resolution photos, but movies are much lower resolution. Email and Internet won't benefit at all.
Matt

Difference between Valuated and Non valuated Sale order stock

Hi All,
Can anybody tell me the difference between the above said subject with the steps involved in each scenario.
That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order.
With Journal entries at each step and whether any WIP or variances at Production order level and sale order level and all the financial entries related to them
Thanks in Advance,
Ravi Kumar

Hi Shail,
Thans for your inputs,
But I wanted to know it in more detail. In what scenarios they are used with financial entries in both the cases.
I will give you my scenario. It goes like this,
My client is in pipe coating business, who receives pipes from customers and does only coating work(which is considered as service) and despatches it to the customer. this process is carried on the basis of work order(Sale order).
Now Production order is created and work is done on that with reference to Sale order for that particular customer.
So the pipe which my client receives should be non valuated stock as it will not be a raw material to them and the cost incurred on it is booked on production order like chemicals as raw material consumption, activity cost etc.
now in this scenario just tell me how and at which stage FI entries get generated at Production order and Sale order level, and also at wat level Standard cost estimate should be created i,e at production order level or sale order level(sale order cost estimate).
Will there be any entries at goods isssue and GR against production order. If no then how the COGM account will get hit.
Please tell me this scenario in both cases Valuated sale order stock and Non valuated sale order stock with financial entries in Sale order costing.
Thanks & Regards,
Ravi Kumar

How do InDesign documents compare on retina and non-retina screens?

I've heard that InDesign looks bad on retina screens, but I don't live near a mac dealer and I can't see any photos anywhere to judge for myself.
Does anyone have any photos which could show how it compares to a non-retina mac?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

HT3939 difference between G and non-G phones

What is the difference between the 3G & 4G phones vs, the non G versions?

as G is not used in the article you came from I'm assuming you see it from various 3th party sellers
this is the list of all ios devices ever made
https://en.wikipedia.org/wiki/List_of_iOS_devices
but various resellers could use other names
G mean generation
in the gase of the iphone3g and 3gs it's because they were the first to support the third generation cellphone network called UMTS https://en.wikipedia.org/wiki/Umts
the Iphone 5 and newer support the 4g cellphone network called LTE https://en.wikipedia.org/wiki/LTE_(telecommunication)

Big difference between Retina and non-Retina MacBooks on ACD?

Similar Messages

Maybe you are looking for