Big email messages sent by BW Process Chains

Dear Experts,
We have a process chain in our system that set to send us email message if it ended with errors.
The problem is that these email messages includes a system log and each message is bigger then 5 mb.
Is there any way to control the size or the content of these email messages?
We don't need the long log text, only a one word indication that something went wrong.
Thanks,
Ron.

Hi!
Our basis had been annoying us with this problem for a long time. Then we produced a very u201Cintelligentu201D decision
You can remove message from this (analyzable) chain link and add another one with type u201CANDu201D. Then connect them with green. After that, create message for this u201CANDu201D- chain link, e-mail will be very small. The existence of this e-mail will indicate about successful chain run.

Similar Messages

Customizing the email message sent from BPF after step completion

Is it possible to customize the email message sent by BPF after a step completion.I would like to customize the email sent by the SAP BPC once a BPF step has been completed. Is it possible to add some dynamic parameters related to the BPF as part of the email message, for example : Cost Centre, Account, Finance or any dimension related to the BPF
Currently it sends out a message as given below
[Approve Data] step of [Test BPF 1] has been completed by dom\bpfuser
Where
[Test BPF 1] => Name of the BPF
[Approve Data] => A Step in the BPF
dom\bpfuser => Domain\ User name
Note :In the APPSET Parameter BPFSTEP_COMPLETE_MSG we tried to add a custom message but it seems to add to display along with the existing message and treats the variables as plain text.

I used the Note 2 for over 6 months before it started happening. About the same time, my husband's iPhone started sending text to email messages at attachments to I blamed it on his phone. I went into his settings and couldn't find any reason and I checked a multitude of websites and saw MANY people having the same issue with no resolution. I also tried deleting all text history and contact info from both of our phones but it continued to happen until I reset my phone to factory defaults.
2 weeks ago I purchased the Note 3 and text messages from my daughter started coming as [email protected] Again, I tried purging all contact information and text message history from both phones with no success. I waited until my daughter upgraded to a Galaxy S4 Mini. I reset my phone to factory at the same time I was setting her phone up and that has fixed the problem again.
My main concern now is that this bug will again randomly rear it's ugly head and I'll again have to reset my phone to factory, losing all my settings and taking days to customize it the way I want it again.
Thank you for ANY help you can give.

Error when sending message(e-mail) from Process Chain ?

Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started                                                                          00        516         S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S
30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S
30.06.2006 18:06:01 Job finished                                                                        00        517         S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141

Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                     Duration   Duration
                         Completed Error      In transit Waiting    In transit Waiting
                                                                         hh:mm      hh:mm
B08(100)                        0          0          0          0
FAX Telefax              0          0          0          0       0:00       0:00
     5 INT Internet             0          0          0          0       0:00       0:00
SMTP              0          0          0                  0:00       0:00
X40 X.400                0          0          0          0       0:00       0:00
        RML R/Mail or            0          0          0          0       0:00       0:00
        PAG                      0          0          0          0       0:00       0:00
        PRT                      0          0          0          0       0:00       0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar

How to stop the "Read Reciept" when using messaging in the BI Process Chain

Hey all - I set up a message in my process chain and now we get an email daily when that process finishes. However it's asking for a read receipt from the users that it sends the message to. I searched on this and also clicked on every button the message settings but could not find a way to turn off the read receipt request.
Does anyone know how to turn this off?

HI,
Go To
1. SCOT Tcode.
2. Click on SETTINGS on the upper tab.
3. Click on CONFIRMATION OF RECEIPT..
4.and check the Radio button.. SAP doesnot expectreceipt confirmation from internet..
and click the tick button..
Hope this helps u..
Best Regards,
VVenkat..

How to display a popup message in query (through process chain)

Hi Gurus,
I need your help.
I have an input query that triggers an event (through a button) and runs a process chain.
I would like to show a popup message to inform the user when the process chain is over.
Using function modules I've been able to show popup messages in the workbench, but I want to display this message directly in Bex Analyzer 7.0.
Thanks
Gabbo

Hi,
I'm also looking for a solution to display a custom message in the Bex Analyser at logon.
Using function module in the logon user-exit works but only when loggin to the workbench.
I don't want to use SM02 (which works in both cases) because I need to display a variable message depending on the user.
If someone has an idea, I'll really appreciate.
Best regards and happy New Year to all of you.

Warning Error message while scheduling the Process Chain

Dear All,
I have created the meta Chain, which contains 7 Local Chains. I have tested this chain in BI Development and Quality. It was working fine. I have moved this Meta Chain to production. While i am trying to schedule this chain, i got the warning message.
Too many parallel processes for chosen server BICI
Message no. RSPC118
Diagnosis
On the server TVSBICI you have chosen, there are only 0 batch processes available. The process chain has been designed in such as way that 3 processes must be processed parallel.
System Response
Only 0 processes can be processed parallel. Note also that to be able to start sub-chains, AT LEAST TWO free batch processes must be available. Otherwise a lock situation may arise.
For more information, see SAP Note 621400.
Procedure
Reduce the number of parallel processes in the chain or include sub- chains. This warning applies to all relevant processes.
Procedure for System Administration
Increase the number of batch processes available. You should note however that it makes no sense to set up more batch processes than there are CPUs on server BICI.
Pls help on this issue.
Thanks,
Siva.
Edited by: Siva Kumar on Jun 15, 2009 9:16 AM

I have Ignored this warning and now process Chain is working fine.
Thanks,
Siva.

How to send a email as soon as the process chain starts

hi,
i feel i am doing the right thing . but i couldn't get the mail.
i have created the process chain.
and attached the message to the start of the chain.
i had inserted the subject to the message and the recepient id is attached to the addresse.
any thing else to be done.
every thing is connected.no need to do the settings as we were getting mails for the other chains.
please do reply in detail.
regards,
soumya

Ensure proper settings done in SCOT.also see after going in SCOT -->CLICK on JOB then see whether any job is scheduled to run to send mails or not ?if yes after what time period it runs.see this.
else check this link
Creating messages in Process chains

How can I set my iPhone to show email messages sent from my desktop?

Using iPhone 5, are there setting that I'm missing to allow me to see sent messages from my desktop Mac on my iPhone?

So to be clear, when you are looking at the Mailboxes side bar, you are tapping through to the email address in the ACCOUNTS section (below INBOXES), then to the Sent folder. Correct?
If yes, is there perhaps more than one Sent folder? Maybe one called Sent and another called Sent (IMAP) or something similar? Maybe take a look at that long list of folders to be sure you looking in the correct one.
If that does't work, then do as I suggested and delete the account and add it again as new.

Portal self registration - modifying email messages sent from database

Hi,
Using Self Registration feature of Portal, we need to modify the text sent to approved users by email.
current message:
The account that you requested at https://mysite/portal/pls/portal/ has been approved. You may now log on to the portal using the username (blaaablaa) and the password that you specified during registration.
I need to change this to something more appropriate/user friendly
Does anyone have experience of this? Could I use UTL_MAIL to modify these messages?
TIA
Kevin

Hi
Thought I'd give an update to this. The portal was sending from an unrecognised account on our mail server. Setting the Approvers account and page group contact email recitified this.
Kevin

How can i stop gmail and email messages sent to my inbox to go to my apple email?

hello to all,
i have a gmail and a hotmail account.
everytime i receive a message in my inboxes it apperas on my apple email account a few minutes later.
is there any way to stop this from happening?
what if for instance an email with a virus is sent to my account?
regards

sorry, I'm sure my vocabulary in English is not helping you, let me try to show you in images...
Go to Preferences,
As my image is in Portuguese-BR, let my try to explain... You need to click on the icon next to iCloud icon. can you see that? that blue ball between iCloud and Rede (network, in English)
I guess opening there you'll can disable hotmail and Gmail, watch the next image, these are the preferences on of Mail, Contacts...:
Now, in this window you need to search for your Gmail and Hotmail accounts, just select them (as in my case I have th Gmail one selected) and click on the minus, that is next to the plus signal, down in the same window.
I can assure you Apple support is the best you'll find, I don't know what it happened to you, but they're the best.
Don't be worried about it, you bought the best device in the world, it just take a time till we now exactly how to use it

Multiple Email messages sent

First of all I have to use the BCC email field for
the quere result email address so all of my customers can't see the
other email address who are also receiving these emails. In the TO
email field I use an admin type of email address for my website.
When the program is executed it works great. The problem is that
for every email that is sent to a customer from the quere results,
around 200 per email, the person listed in the TO email field also
gets an email sent to them. So I wind up with 200 duplicate emails
every time the program is executed. I have tried leaving the TO
field blank but just as I would suspect the program errored out.
What I want, is to have the program send one email to the TO
recipient and one to every person in the quere results list.
I attached the pertenante code but deleted the rest.

Don't use the query attribute in your cfmail tag. If you want
to send everyone a bcc, use the valuelist function.

Blank Email Messages Sent from Mail to Some Recipients!

When I send email, using Apple Mail, I'm told that the body of my messages appear completely blank (although my address and the subject line do come through). I've narrowed it down to people who have hotmail, msn, and earthlink accounts.
I have tried on both my MacBook Pro and older G4. They both have this problem. I also have 4 email accounts, all through different services, and again all have this problem.
I am using some CSS in my signatures, but when I don't use a signature I still have this problem.
Any ideas on what the issue might me. Thanks in advance.

Hi ideaspring
I compared your plist to mine. There were many differences naturally, but some stand out in my opinion:
I found the following in your plist, but no in mine:
EncryptOutgoingMessages = 1;
I'm not sure, what this is, but I believe you might have installed a .Mac certificate and set you .Mac account to use this certificate to encrypt or just sign your messages.
I played with that some time ago: the problem was: windows mail clients had to go through quite a hassle to verify my cert, while Mail.app users were fine.
I found the following in my plist, but not in yours.
SendFormat = Plain;
SendWindowsFriendlyAttachments = 1;
AttachAtEnd = 1;
The first can be set in Preferences > Composing, the second and third via the Edit Menu > Attachments > Always...
It would be helpful, if you could narrow the problem down to one of your mailboxes and one recipient, who is willing to help you testing. Even if it happens to all your mailboxes and some recipients, it would be good, if we could find a way of always reproducing the symptom.
Hth,
--greg

Including System ID in the messaging of the process chain!

Hi,
Can any one here tell me ,how to include the System ID ( i mean whether the system is development or production ) in the messaging system of the process chain? i had used email address in the messaging system.
i had included the message , but do not know how to include some texts or the system id of the respective System in the messaging service!
problem is i had included messaging system in both the process chains of the dev and production!
is there anyway for this?
Thanks,
Ravi

Ravi,
By default, the system will include in the email a description of the problem, including the system where it was originated.
Another thing is including the System ID in the subject of the email.
Are you transporting the Process Chains or just creating them locally?
If you define the message variants for the Events Error or Success results locally, then you can type directly "DEV", "PROD" or the description you like, in the subject or the body of the message.
Regards,
Luis

Email alerts in process chain

Hi
I am trying to send email alerts (messages (sucess/Failure) thru my process chain , I gave the correct email -id a , but I'm not getting an email, after I schedule it, to I have to make any settings with Basis team?? Can some one share what are the initial steps , which have to be taken ??.
Thanks
Praveen

Hi Praveen,
Please follow the below steps
Would like to share this information regarding email alerts whenerrors occur in Process Chains.Step by step process to follow:
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards!
Mallikarjuna Reddy

HT201269 How can I backup all my email messages from my ipad2 to my mac. iTunes does not transfer all the sent / received mail.

Hi,
I damaged my ipad and saved a backup using iTunes while it was away for repair.
I used another ipad while it was away, but none of my email messages sent or received had been saved.
How do I backup my email ?

hi, not totally, as when the N8 died, the shop here in France couldn't really do much to help and more like didn't want to do much to help, and transferred what data was available from the sim to the mini sim on the apple. Now looking in depth, Windows Contact is an 'orrible application that is not very easy to handle (Windows Address Book is no longer available for anything above Vista and is all tied into Windows Live and things to do with Hotmail and Messenger..... Gatesy is trying to dominate things again..... WOZ HELP!!)
Sony have worked alongside Apple for a long time, so with a new 12/2012 Experia smartphone, the transfer details are a doddle, but now that Nokia has succombed to being part of the Dark Side (MS) and offering windows phones only, I can understand the retiscence of our late leader and his "heavenly crew" of having to deal with the Dark Side

Big email messages sent by BW Process Chains

Similar Messages

Maybe you are looking for