Big Genius Problem=[

i recently updated my first gen ipod touch to the new software version so i can use genius, problem is i did it on a friends computer and put alot of their music on my ipod. none of them songs are on my laptop and i cant get them to work in genius on my ipod. is there are anyway to get those songs to work?

Yes. Buy them legally on your computer instead of pirating them, turn on Genius on your laptop.
Please don't steal music.

Similar Messages

  • Email and big wifi problems.

    Email and big wifi problems.
    Why does it take 6 minutes to send a photo attachment when my iphone 4 will do it in 30 to 40 seconds ?
    Why will my email account be recognised and log on only half the time?
    Why does the wifi keep dropping out?
    Why does the speed and signal vary when I'm sitting two feet away from by wifi router?
    All settings in my phone have been reset twice as per advice from vodapone

    Thanks very much, jjgraphics. I will grit my teeth and try India once more, as you suggest, and then get in touch with the moderators.
    Karen.

  • Have Operating System 10.6.8, Mail Program 4.6.  How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

  • Big Eudora problem, small Finder issue-- related?

    I use Eudora for my email, and unfortunately my big Eudora problem is not getting solved in the Eudora message board; after half a day of Eudora quitting unexpectedly and then working fine but just for a few minutes if I restarted my computer, now when I launch Eudora, my Finder crashes-- everything disappears but the background image, and the computer is frozen.
    The reason I'm posting here is that before it reached this stage, there were other weird things that didn't relate to Eudora: I would try to launch Flash, and Flash couldn't open a new blank file. I would try to launch something else, and an error message would say that some component in a Library wasn't found. All of these things are not happening anymore; as far as I know, only Eudora is misbehaving, but one odd feature remains: every finder window is showing, next to the search field in the upper right, a large question mark, and next to that there is a folder icon. If I click on the folder icon, I'm taken to one particular folder in my HD that has no significance to anything that I can tell. If I click on the question mark, I get "the item can not be found." (Hence the question mark, I guess). But what are those doing there in every finder window? Is there supposed to be a folder icon at the middle-top-right of every finder window? I don't remember one there.
    I have done an archive-and-install of OS 10.4.6, but the finder window business is still the same.
    The hardware test CD that came with my PowerBook says all hardware is okay. Disk Warrior finds no problems. Disk Permissions are okay in Disk Utility. I ran Clam Xav, and it found four copies of viruses: three (called Email.Ecard-6) in my In box and in two mailboxes with older In messages, and one (called Email.Phishing.Pay-8) in my Out box. I put all of these files in the trash and restarted my laptop, launched Eudora and the finder crashed. I reinstalled Eudora and the same thing happened, although I had put the infected boxes back in place before reinstalling Eudora.
    I don't know where the problem is.
    Any advice, please?
    Paul

    Ciao Von Stripes,
    I've just found the solution:
    Open - System Preferences, then open - Spotlight
    There is a list of categories.
    Find - Files on the list, then click, drag and drop to the position number 1 and "voilá"
    I hope it works for you too... 

  • Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help...

    Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help?

    What battery life are you getting?  Is it short when you are using the iPod? When it is sleeping?

  • The big iChat problems. Audio/Video (now completely broken in 10.7.3), the "not-authorized" problem

    So, I am running iChat on OS X Lion 10.7.3 on an early-2011 MBP 13'' . These problems have been here for a while, though (I got my comp with 10.7.0). I have AIM/GMail/Yahoo connected..
    One problem is the issue of non-authorized people. There is a list of "not authorized" people that I have to scroll past in my "offline" section of iChat buddies before I actually get to the real offline contacts. Big note here: All these people have the address (something)@aol.com. These contacts have come up as a result of my gmail connection. You see, a few months ago Gmail and AIM did this chat unification process where @aol.com contacts can be just added into Gmail for chatting. These @aol.com copies come up asking for an invite when the REAL AIM address person talks to me. The invites leave once I press decline, but then they stay on my list as not authorized. If I delete these "not-authorized" copies, the invites will come up again and the cycle will repeat. It is a nuisance considering how much of these false contacts are on my list.
    Second problem is video/audio chat in general. This issue really applies on AIM/Yahoo—there is nothing for Gmail because people usually use the web interface which simply doesn't work with iChat video/audio. If the people used Google talk, the issue written below would probably come up.
    See, what happens is that…(now in 10.7.3), video/audio chat is simply broken, simple as that. My contacts always tell me that an error has occurred when trying to accept my video chat invite. It simply doesn't work. They are using AIM desktop in most cases. When it DID used to work (to a very limited extent, I'll say; it was hit or miss earlier pre 10.7.3, now it's just miss), it was just video but NO audio. They could see/hear me, I could only see them. When I did audio chats, they hear me, I..don't hear them (so audio chats were pointless). The only case where this problem doesn't happen is where it's Mac to Mac, iChat to iChat. VERY limited in use of audio/video chat, if you ask me.

    Hi,
    If AIM contacts have been added to your Google Buddy List then I would login to Google and remove them from there  (the iGoogle or GoogleMail web pages will show the Chat option)
    Whilst they are still in the List then the Authorization request will probably be resent (In this case it is probably being generated by the method Google are using to add the AIM names as iChat only sends it once).
    Google/Jabber Video chats is only iChat to iChat and so is Yahoo with iChat 6.
    The Yahoo App streams Video which People can be allowed to see and Audio is added in as an Audio Chat.
    The connection Process is not the same and iChat/AIM
    Jabber and Google use Jingle to Connect (in fact Google's version is not that compatible with other Jabber apps).
    This means iChat to the Standalone PC app  or any Web Browser using the Google Video Plug-in (PC or Mac) or to any Jabber app that is using a Google ID (or a Jabber ID) will not work.
    On the iChat to AIM on a PC.
    This has always been a bit of a hit and miss affair.
    Some people have no trouble but other spend ages trying to set things up and never find the solution.
    This is the Original Users Tip  (up to about AIM5.9)
    A "replacement" for that tip that has not made it across yet.
    I have yet to try Video to the Web Login version that is now on offer.
    However I would limit the Bandwidth in iChat Menu > Preferences > Video Section to 500kbps (possibly try 200kbps for 1-1 chats) as you will not know the interent speed available to the Buddy if they are using the web login.
    Comparisons
    When you compare iChat actual functions to what you would like it to do it can appear to be limited.
    On the basis that you would want your IM app to be able to have Buddies from other services listed in a Buddy list (combined) or Lists which apps do you know of can do that and Video to some of them ?
    Adium and ProteusX can both have Buddies from the major Services ina  Buddy List but don't do Audio or Video.
    Yahoo and MSN both allow the other's Buddies in the list but I am not sure about Video or Audio chats
    They cannot connect to Jabber or AIM buddies even for text chats.
    Jabber does depend on the server you use and whether that does Transports for you to have text chats with other services.
    Instructions for iChat.
    Mercury IM is a JAVA version of MSN and still has not got to Audio and Video
    Similar for aMSN
    Gizmo5 and YakforFree both died...
    Skype is Cross Platform  but is only 1-1 in Video chat.  (cost extra for 3 and 4 way chats)
    Yahoo had dropped support for their Mac version now iChat has the Yahoo option  (you can still download it  - IT being the beta it has been for  years).
    2:40 PM      Saturday; February 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Big graphic problem on MacBook Pro

    First, I appologize for my english but i'm french !
    So, I have a very big problem since I have upgrade to Mountain Lion on my MacBook Pro mid-2010 (Core i5 2,4Ghz / 4Go / 320Go) : when the graphics card switch from the Nvdia to the Intel3000, it turn like this :
    So I need to restart. There is no problem when I start with the Intel3000.
    Only append when it switch from the Nvidia to the Intel3000.
    So I use gfxCardStatus to only use the Nvidia but I'm waiting for a fix from Apple with the next update of Mountain Lion.
    Great update ...

    Reply to myself but can help other people : after a "clean install" of Moutain Lion, using a USB key, no more problem, even with gfxCardStatus !
    And big big improvement of system reactivity.

  • Big iphone problem, please help

    I was using the internet on my phone today and the iphone suddenly froze, i couldn't move the screen around and i could not use the sleep button to turn off the screen, or reset the phone. eventually the backlight dimmed, and the screen went black. I have tried using the forced recovery on the iphone, it doesnt work. When I switch the silence ringer option, it does not vibrate.I plugged it into my computer(PC) and it did nothing. I have had the phone for about 10 months now and it has never given me any sort of problem. It is like all methods of imput don't register. I am pretty sure it is dead. Please prove me wrong.

    Have you tried to reboot the phone. Do that by holding down both the home button and the power on/off button until you see the Apple logo. When you said you tried the force recovery, you mean by holding the home button and plugging it into iTunes on the computer? If none of that works, then it is time to make an appointment with the Genius Bar. That can be done online at http://www.apple.com/retail/geniusbar
    Hope that answers your question.

  • Broken Ftp Connection and big files problem

    I have a problem with big-files downloading.
    Does anybody know how to resume downloading using FTP-connection?
    Or how can I get bytes from FTP connected file using something like random access to avoid the restart of downloading the file?
    "InputStream" does not support "seek"-like methods.

    From RFC 959
    RESTART (REST)
    The argument field represents the server marker at which
    file transfer is to be restarted. This command does not
    cause file transfer but skips over the file to the specified
    data checkpoint. This command shall be immediately followed
    by the appropriate FTP service command which shall cause
    file transfer to resume.
    You should also be aware of RFC 959 Section 3.4.2 on BLOCK MODE transfers which is what allows FTP to REST a connection and "skip" n-bytes of a file.

  • I have a big Manufacturing problem with my i phone 5  what to do now?

    Dear sir ,
    I want to Complain for my new i phone 5 that I get it on last December its only work for three month only with out any bad using my monitor is freezed and i cant use the phone when i sent to the dealer they inform me thet mobile have a manufacturing problem so i'm asking you what i have to do?

    You need to take the iPhone to an Apple store genius bar for testing by the techs and replacement.  If you are unable to go to an Apple store, file a service request through the ExpressLane at: https://expresslane.apple.com

  • Big generic problem

    I'm having a big problem. Look at this:
    public class Person {
    public class Employee extends Person {
    public class Bank {
    private List<Person> people = new ArrayList<Person>();
    public List<Person> people() {
    return people;
    Now the problem:
    public class Test {
    public static void main(String args[]) {
    Bank b = new Bank();
    b.people().add(new Employee()); // This was to be forbidden, but
    // the compiler doesn't complain
    In the class Bank I declared a list to contain only Person objects:
    private List<Person> people = new ArrayList<Person>();
    and a method to return it, with the same generic type:
    public List<Person> people()
    so, how could the compiler let me add a person of type Employee in the class
    Test? No matter if I change the declaration of the people() method to accept
    only objects of class Person and above, like this:
    public List<? super Person> people()
    it still compiles and I still can add Employee objects to the list that were
    supposed to hold just Person objects.
    So, the question is:
    HOW COULD I RETURN A LIST IN A METHOD WITH A GENERIC TYPE THAT HAS SUBCLASSES AND THAT I CAN MAKE THE LIST TO ACCEPT OBJECTS JUST OF THAT TYPE, NOT OF ITS SUBCLASSES? So, this is type safe. I don't want the list of the example above to accept objects of type Employee, just Person.

    so, why can I add Employees to a list declaredthis
    way
    public List<Person> get() {
    return people; // <--- list of Person
    }I don't see how it can be said any more clearly -
    BECAUSE AN Employee IS A Person!
    wouldn't it be to behave the same way as you
    said?
    Is
    the proplem related to a param and a return
    type.
    With params with works, but not with returntypes?
    I don't understand your point!Look if I'm really understanding this thing:
    public void add(List<Person> p)
    private List<Employee> e = new
    ArrayList<Employee>();
    obj.add(e) // Error. It's not exactly a PersonNow:
    public List<Person> people();
    private List<Employee> e = new
    ArrayList<Employee>();
    obj.people().add(new Employee()); // Ok. But why?An Employee is a Person. But in the first code it
    didn't let me add an Employee to a method acception a
    Person. That's what I want. But why the second code
    worked. Isn't it the same thing. The param type in
    both examples is a list of Person.To be more clear in the first code:
    public class Obj {
        public void people(List<Person> p)
    private List<Employee> e = new ArrayList<Employee>();
    Obj obj = new Obj();
    obj.people(e) // Error. It's not exactly a Person

  • Genius Problem

    Hello,
    I have a long-term serious problem:
    I have an Ipod touch 32GB 3rd Gen. with OS 4.02
    and an Acer Laptopo with Windows 7 and ITunes10.
    that's for the technical specs.
    My problem is that my Genius is turned on in Itunes and updated and it works fine only in my library, on my laptop. I can't get it to make playlists on my Ipod either when it's connected to Itunes and when it's not. when connected there's just no such option and when i touch the Genius Icon on the ipod it generates a message that says "try again this song does not have enough related song bla bla bla..." I tried everything and i'm kinda goin loco.
    I would appreciate a little help here.
    thanks very much

    I believe it only works with songs that are available in the itunes store, so if you use it a lot you will never hear anything from more obscure bands, or just anyone who isn't signed to a major label. additionally to that, I'm sure there will be a lot of marketing manipulation going into how it decides what you listen to. I would not be surprised to find that songs from a band will be recommended more often when they have a new album coming out soon.
    just for example, it may be my imagination but after using it for a couple of days it seems to me that U2 and gorillaz (who have both been part of ipod/itunes marketing for years) are coming up a disproportionate amount for completely unrelated artists.
    also if there is a band which is on itunes but you have songs which aren't then you'll never hear those either. e.g. the latest minotaur shock album was released exclusively on his website, (for a much lower price than itunes sells anything) therefore if you try to search songs from that album nothing comes up, but if you search from his other albums (which are available on itunes) you get plenty of results.
    to me this is such a major flaw i might not use genius at all, i don't want to have what i listen to manipulated in this way. if only we could have last.fm incorporated into itunes somehow, that is a truly user generated, unbiased music recommendation service.

  • Big disk problems - or big-disk problems?

    Hi there!
    I have really big problems. I try to set up a 45 GB Western Digital Caviar 450AA (secondary IDE controller, master-drive). I patched my machine with the recommended patch cluster which also contains patch no. 110202-01 for the ata-drivers. I am able to fdisk the drive with a geometry file using fdisk with options. I am also able to partition the disk with the native solaris 8 x86 format tool. I label the disk - fine so far. But when I try to build a filesystem on it, newfs terminates wih errors. I afterwards tried to set up a scsi-disk with 4,1 GB (IBM DCAS 34330). The same problem occured: newfs (as well as mkfs with options) terminated with the following error message:
    mkfs: bad value for size: 0 must be between 1024 and 0
    mkfs: size reset to default 0
    mkfs: bad value for ntrack: 6 must be between 1 and 0
    mkfs: ntrack reset to default 16
    seek error on sector -1: invalid argument
    That's pretty strange, isn't it? I don't know wheter Solaris x86 is that different from Solaris SPARC edition. Perhaps I'm too dumb to get this machine working and should put my fingers off Solaris x86 edition.
    Could anybody in this world help me? Or has anybody the same problems? You know - it's just for my collegues: they are now calling me brad...
    Greetings
    SERGEJ

    Two choices:
    - Call Apple (1-800-MY-APPLE) and order, for nominal cost, the original DVDs.
    - Or order the SN disk from Apple
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Ant big compile problem

    In our company we create business application which is made from 3 projects and they are related to each other.
    This 3 projects are:
    Model
    ModelIRC200
    View
    Example of problem:
    ircbutton.java has this lines
    package irc.irc2000.ircSwing.komponente;
    import irc.kis.view.dm.sifranti.TipiDelovnihMestTabela;
    i am running ant compile under ModelIRC2000 project direktorij, but this
    packages are under ../View/src/irc...
    now i get error like this
    [javac]
    C:\Projekti\KIS\ModelIRC2000\src\irc\irc2000\ircSwing\komponente\IrcButton.java:3:
    error #300: TipiDelovnihMestTabela not found
    how can i include this TipiDelovnihMestTabela in ant build.xml file that i
    will not get this error anymore.
    If i include classes of View then works but classes of View must be compile
    first, but they are also related to ModelIRC2000 so i can not compile it.
    Oracle Jdeveloper when compiling jumping from one project to another that
    they compile this sucessfully, how ant can do this?
    big thx for help
    regards

    i read all ant manual but i cant make this.
    For model 2000 my compile ant build.xml looks like this
    <target name="compile" description="Compile Java source files" depends="init">
    <javac destdir="${output.dir}" classpathref="classpath"
    debug="${javac.debug}" nowarn="${javac.nowarn}" failonerror="false"
    deprecation="${javac.deprecation}" encoding="Cp1250" source="1.5"
    target="1.5">
    <src path="src"/>
    <exclude name="irc/kis/view/zap/Obracuni/"/>
    <exclude name="irc/kis/view/zap/sifranti/pageDefs/DrzavljanstvaTabelaROPageDef.xml/"/>
    <exclude name="irc/kis/view/zap/sifranti/DrzavljanstvaTabelaRO.java/"/>
    <exclude name="irc/kis/view/zap/pageDefs/DrzavljanstvaTabelaPageDef.xml/"/>
    <exclude name="irc/kis/view/zap/DrzavljanstvaTabela.java/"/>
    <exclude name="irc/kis/view/pageDefs/"/>
    </javac>
    </target>
    and build.propertie like this
    javac.debug=on
    oracle.home=../../../Oracle/jdevstudio1013/
    build.compiler=oracle.ojc.ant.taskdefs.OjcAdapter
    output.dir=classes
    javac.deprecation=on
    javac.nowarn=off
    how must look ant compile that it will compile files form another related project when necessary and put it into View/classes dir
    thx

  • BIG Scrolling problems in Chrome

    Hey everyone.
    My Name is Alex and i habe a big problem.
    I made a Site http://www.collecdiv.com
    In my Browser (Chrome 27.0.14.....) is everything ok.
    In the same browser of a friend, the scroll function doesnt work.
    I try to enable the scrollbar, with local testing it works, but if i upload the
    page on my server, the scrollbar is not displayed.
    Please help.
    Best Alex

    thanks iamDK. i fixed the problem. And thanks for the probs..

Maybe you are looking for