Big hugly bugs!

All of you that use catalyst have probalby noticed that it likes from time to time to just, without any explanation, close. It's ok as long if it asks you if you want to recover the file you were working on. Nonetheless i would advise to at least pronpt the user before quiting or something like that ( it does some times, but mostly just closes with no explanation). Maybe it's because i'm on Vista 64bits, dunno, it's just really anoying.
Another bug i'd like to report, if you can call it a bug, it's that catalyst loves to drag around and takes forever in simple requests, from entering a component, or choosing a layer....it's just plain anoying!

Hi Joana,
Thank you for the feedback. We improved the performance and memory usage of Catalyst quite a bit from beta I to beta II, and since then we have continue working in these areas, so you should see improvements with the next release. Sorry to hear you have been crashing with beta II. In the meanwhile, you can keep Catalyst going as fast as possible by:
1. Converting graphics to "optimized graphics"
2. Avoid too many top level states by converting parts of your design to custom components
3. Rasterize/flatten vector artwork in cases where the artwork doesn't need to resize
http://forums.adobe.com/people/JoanaBCunha
Ty

Similar Messages

Another big hugly bug

Moving objects in the layers panel is really anoying. If you tell a layer to go beneath another layer it goes on top. if you pick and drag a layer every grouped object layer opens and everytime you stop moving a layer in the layers panel it resets and goes to a different position so you're oblidged to scroll to wherever you where before.
Not time saving and a huge pain in the ***!!!!!

Paul:
Did it finish loading the iView files? If so check the size at the bottom. If it's still incorrect and extremely large try rebuilding the library, launch iPhoto with the Command+Option keys depressed, follow the instructions to rebuild the library, while selecting only the database option. That may clear up the problem.
I didn't note the size when I was importing my iView collection but iPhoto does reports the correct size now.

HUGE BUG IN Flash Player 9

I ran into this huge massive bug in FP9..
Reproduction steps:
1. Goto Flash Download page.
2. Select version 9 for Linux.
3. Install
This normally breaks down around step 2.

So its not a bug in the player .. its a problem in the
download of it.
Doesn't sounds like a massively huge bug in the player at
all.
>I ran into this huge massive bug in FP9..

A huge bug for captivate 5.0.1 updated

Hi!
Today I have updated captivate 5 successfully,but found a huge bug!
That is I can't copy and cut any things(e.g. botton,text box...)
If I do copy or cut,the software will stop and never be changed.I can't do anything.
This's terrible! anyone may tell me how to solve it?
Or wait for next update?
Thanks!
kain

Hi Kain,
Bit difficult to detect the cause, I have patched CP too and do not have that issue at all, neither did I hear about it on this forum until your question. What OS are you on? If it is Vista or Win7 do you run CP as an administrator?
If you did not customize preferences (a lot), I would suggest to delete the preferences folder, while Captivate is closed. When you restart it a fresh folder will be created by CP. It depends on your OS where this folder (labeled Captivate 5) is residing. I'm on Win7 and can find it in: <username>\AppData\Roaming\Adobe
Lilybiri

Big,irritating bug in

I 'switched to Mac' in 2012. I like it a lot but there are some huge discrepancies Theres a big bug that is very irritating in Preview app of 10.8
I read scanned Ocr ed texts a lot as pdf. Whenever i try to highlight multi column text in pdf , the highlights are not complete . But when i do that in Google Chrome's native pdf reader, the highlight is totally nice and proper. I have tried to select text using Option +select button , no improvement . Please see the image below. On left is Preview app, with incomplete selection of a pdf page(see it has left two paragraphs ) but on right , Chrome has done it nicely.Adobe reader also does it nicely . But I like using Preview app becauseChrome's and adobe's pdf readers arenot as fast as preview app from Apple.
What is the solution to highlight full paragraphs in Preview app without encountering this bug ,People ?
OCR software used is : Adobe Acrobat Pro.It OCRes perfectly and the files are properly marked in Windows too

I appreciate your response,Arthur. But if it were a problem with Adobe Acrobat's OCRing,why would the text work perfectly in 1)Chrome 2)Adobe itself 3)Windows 8
Heres a drobox link of a sample document which i had problems with highlighting "FULLY"
http://db.tt/ga1jKd3p
My Preview app can hihlight only this way :

E72: Low free RAM is a HUGE HUGE HUGE BUG!

HI 2 everybody.
I bought an E72 some days ago, and I really suprised about the product quality. Of course, in this case "quality" means some things very good, and some things VERY bad. But the problem is, in this case, bad things.
WHY IN THE HELL E72 HAS SO LOW FREE RAM?
It's incredible, I remember N95-1. The main difference is N95-1 had 64MB, E72 doubles that! I cannot believe that after booting up, the phone left only 28MB out of 128! I cannot load 2 big programs simultaneously, because the OS crash at any moment because of low free memory. I never had this problem with my "oldie but goodie" E71. And I'm surprised that, after 2 firmware revisions, Nokia doesn't solve the problem! Why??? It's so difficult to unload many unused processes? Is so difficult to activate some type of virtual memory? AFAIK, N95-1had virtual memory. And, by the way: why E71 doesn't come with 192 or 256MB RAM???
Now, knowing the fact that Nokia doesn't want to solve this issue, well... Anyone has trying or tried to solve that? Any Symbian expert? Perhaps killing unused or annoying processes?
Thanks a lot.
Nokia: IT'S A SHAME!

To the OP, its not a bug, but a total failure of the development process. Its quite pathetic that even the E63 has 70MB free after startup while the E72 has only 40MB.
As soon as you load any WWW page the thing flunks.
So apart from using it as a tether device to my laptop the E72 is a failure as any sort of net enabled phone ... compared to my E63 (and yes I have both) its speed only helps you to hit dead ends faster

Huge Bugs with Many Legs Still Living in Premiere Pro - (Border from Sharpening & Flickering from Adjustment Layer)

I haven't edited video in awhile. While working on a new project I've run into a bunch of what I suppose are well known issues in Premiere Pro CC 2014. It seems Adobe has know about these issues for some time, but that for some reason, nothing is being done about them. Here is my most recent experience with editing a video using PP:
1. Found that color correction tools in Premiere Pro for setting White Balance Suck for folks who don't edit video 8 hours a day.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: White Balance in Premiere Pro CC on Vimeo
The dude shows you how to use the Cyroce Color Neutralizer plugin from After Effects - but sure enough the current version of the plugin that ships with AE CC 2014 doesn't work with premiere any more so you have to download the old version from dude's website here: http://www.sternfx.com/tutorials/136
Thanks to the DUDE!
2. Found out that adding an Adjustment layer can cause flickering in footage.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: PP CC 2014 - adjustment layers flickering problem : Adobe Premiere Pro AND Re: image flickering from adjustment layer
Added mask to control flickering. More specifically, I turned each effect in the adjustment layer on and off until I found the particular effect that was causing the flickering. Then I created a mask in that effect which covered the entire frame. Mystically the flickering disappeared. Learned that if you make any changes to adjustment layer effects, flickering will return and you have to delete/recreate the mask once again. Ridiculous.
3. Thought all was good and that I could now peacefully continue to finish my project. I was wrong. Found that adding sharpening in adjustment layer causes a small border to form around the entire frame. The pixels seem faded or translucent or something.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: Sharpening bug Premiere Pro - - Fourmedia
So now I've learned that the sharpening effect needs to go on it's own adjustment layer. Awesome.
Flickering returns because I made a change to adjustment layer 1. Re-mask. Sweet.
That's it. Pretty sure this post will help folks out, but man I am going to run out and give another NLE a shot. None of these operations should be this difficult. Makes me wonder if Adobe even attempts to use their own programs. I don't see how anyone could possibly let a huge tool like Premiere Pro suffer from these issues -- and for so long a period of time. Absolutely ridiculous. Adobe truly seems to be asleep at the wheel. This is some amateur crap here.

Thanks for this post. It would be cool (since Adobe doesn't seem to use their products) if there were more posts like this that I could read before I upgrade. I'm having the flickering w adjustment layer problem you mentioned in #2 - and this post is over month old! Aghh

"Save for Web & Devices" Huge BUG and major annoyance!

Photoshop CS3
I am so tired of losing all of my work for this bug it isn't even funny! It doesn't lock up Photoshop but does make it impossible to save anything including all the currently cropped and resized images open in PS. It forces you to lose hours of work in some cases which is what just now happened and I want something done with this since it is probably the biggest annoyance from a BUG of all the adobe products ever.
To replicate this bug:
Open an image, any image.
Go to File and Choose "Save for Web & Devices".
Once the "Save for Web & Devices" dialog box is open choose save, BUT here is the bug, after the Save As dialog box appears choose cancel to go back to the open and now useless "Save for Web & Devices".
Attempt to now close the "Save for Web & Devices" dialog box.
The issue is it won't close once I cancel after choosing save from the "Save for Web & Devices" dialog. I cannot resize the window or do anything in PS when this happens since it takes complete focus. I cannot close the box or choose from most of the options on the right since now at this point they'll all be blank.
This has happened before and I had learned to save no matter what to avoid this but just forgot and am once again about to lose HOURS of work because of it...
I have searched and searched and cannot find a separate process to close in device manager to stop just it (which is lame). All I can do is close PS and say good bye to everything I had already done.
Of course I would like a solution to this and a fix but having owned Adobe products for years know this is highly unlikely and to get a fix you must buy the new version (pathetic). So, I will settle for yet another hopeful work around to get around this idiotic BUG.
EDIT: I have rebuilt my preferences countless times (since that seems to be needed for so many of Adobe's products issues) as well as complete resinstalls of the CS3 Production Premium Suite to no avail. I have dealt with this issue for several years and several new installs. I have an aviation forum and people have been able to replicate this on theirs installs as well, to include one CS4 user.
Message was edited by: Danbo342

Thanks Noel, and others.
I have listened to people. In fact read my second post. It was seeing the 1st two that couldn't duplicate the error get on the phone to a friend in Germany that was able to duplicate it. I then came back here and shared what my suspicions were of the Matrox unit. The other person able to duplicate the issue has yet to return to the forum for me to further check with (I guess some people sleep).
To be clear here. I have owned CS3 since it's release. I have built myself several computers since I bought it and this one is actually the third since then. This particular issue though was never seen until a few months ago since I seldomly use the Save for Web for saving files and just started using it on my latest flash site.
As for video cards. This card I am using is my 3rd. My GTX 260 was great but being having other joys of the PC I also always kept up with the latest and greatest cards so thus came my last purchase of the GTX295 before the newer ones hit. Point being, the issue is most likely my Trip2GO and plan on testing when I get home and get it ripped apart. I do web design on the side which is one reason the trip2Go for my home workstation. The other point is that I do a LOT more than Adobe work and my card needs to be high end and not some cheap card just to make my suite work. Maybe in the future I'll make another comp,,, one for every other product I own and then one just for Adobe's products.
Now as for tech support and myself. I am A+ certified. I am certified in every OS since Dos 6 and a hardware engineer. I do tech support, have 3 support forums and 11 web site, all primarily based on support. My comments above were not about getting mean, it is because Adobe support in general is one of the worst that I have ever had the misfortune to deal with and strongly disagree with the way they cut support and updates to a year old product (that's when no more patches came out I meant and known bugs were written off for the next version). To say try a new video card to me is like a supposed "tech" to say reinstall your OS, or like here reading people say (what I originally said I did) about clearing the preferences. Sure, this help clear up lots of Adobe product abnormalities but listen up folks, it's not a SOLUTION, it is merely a work around. It shouldn't get so screwed up to begin with. This is not my product and although I have tried it, it is wrong to not fix these issues and just expect people to keep refreshing there preferences. It takes me hours and days to get things back the way I want them and normally half way to heaven another bug and I have to reset them yet again! This is us dealing with a broken product, period. It is far from a solution, there's a huge difference.
Moving along,,, This build is a few months old but my windows install is much more recent. All firmware, drivers you name it is up to speed 100% I guaruntee. My hardware is all working perfectly with the propable exception of the Matrox rig. It has to be it. Being that the 1st two people to reply in my own forum were able to immediately duplicate the error had me thinking other but as you should be able to see is that changed fast and if you read this thread from top to bottom you'll see that I have been providing all the answers people are asking.
Thanks again, I'll report back tonight. My current plan is to go through the painful process of getting just one monitor working without the Matrox unit, flushing my preferences and trying again. I think it will work fine but will report back either way.

Slow motion Huge Bugs IOS 8.1 Iphone 6 Plus

When you shoot in either of the two slow motion speeds and plays back ok on phone. I put the files in the computer (grab the raw file via explorer), on Win 7 Professional, and played with both windows media player AND Quicktime player (up to date players) and the videos play either no slow motion, plays alternating between fast and slow, one time it played slow but had normal voice pitch, other times played slow with low voice pitch. On youtube, they don't play in slow motion. One I shot vertically (which I did just as a test) and it was sideways in the computer, however, youtube rotated it so it's vertical but it is not in HD and it does not play back in slow motion. This same file that was sideways in my computer stopped playing after about 2 seconds in the computer, but played through ok in the phone. I noticed that as the video plays in the phone, there are blue vertical lines below the left/right scrub/scroll bar for the video. This can be set to play only a portion in slow motion. But WHY does it start each video with the ends nudged in so the first 3 sec is regular speed and the last 2 are also reg speed also w/the slo-mo in between? It defaults to this each time an you have to spread it out to get all slow motion..
In Win XP, some of the video files don't show up. It shows .aae files with corresponding numbers to the videos, but most of the videos are not there.
I think this is a huge software bug that needs to be tested. I updated the os on my new phone before I put anything into my phone. Everything else has been perfect till this. HELP!

HI Brian,
have tried the hard reset, sign in and sign out still to no avail, and it won't let me update the iOS, unable to update when I try to it won't even let me see the available update
also I don't have access to a computer as I am a interstate truck driver in australia

Huge bug in Flash CS4 verify

Could any one please verify this bug and let me know if it is a bad install or acualy a hugh bug in Flash:
This is what is happening...if I do not give instance names to the buttons on frame 1, frame 2 buttons WILL NOT work even if they are named...also doing a trace of objects shows they are given the flash default names...as though I hadnt named them...here is the FLA I saved it as CS3 :
http://alphagraphicdesigns.com/help/Flash_bug.fla
these are the steps to get it to happen:
1. Create a new document using Action script 2
2. Draw out a vector rectange using the rectangle tool
3. Right click and turn it into a button (dont give it a name leave the default)
4. Copy and past it 5 times on frame one (do not name any of the buttons)
5. Name only one of the buttons "navigate_bnt"
6. Past the below code on frame 1
navigate_bnt.onPress = function() {
gotoAndStop(2);
///Loop and find all objects
for (var Object_Name in this) {
trace("frame 1: "+Object_Name);
stop();
5. Create a frame on Frame 2 of the timeline
6. Past the button 5 times on frame 2
7. Name 1 of the buttons "navigate_bnt."
8. Name 4 of the buttons on frame 2 : "bnt_1","bnt_2" ect..
9. Past the below code on frame 2
navigate_bnt.onPress = function() {
gotoAndStop(1);
bnt_1.onPress = function() {
trace(this._name)
bnt_2.onPress = function() {
trace(this._name)
bnt_3.onPress = function() {
trace(this._name)
bnt_4.onPress = function() {
trace(this._name)
///Loop and find all objects
for (var Object_Name in this) {
trace("frame 2: "+Object_Name);
stop();

Hi Ned,
Thank you for verifying this and the suggestion...
The issue with adding the "blank frames" is the flash player slows to about 4 times slower to render out the new frame.
I have decided to place the code directly on the buttons, because I have found that sometimes a button's name will change as well and call on the wrong function....So this is very weird that I can dynamically change a buttons name hardcoded in! I cannot take the risk of the button firing off the wrong function as this could seriously injure someone. This program controls some big machinery.
The issue seems to stem pretty deep into the flash engine and effects all "Objects".
For example:
1. On Frame 1 name all of the objects
2. On Frame 2 rename all of the objects
3.On Frame 3 do not name the objects
On frame 1 gotoAndStop(3)
all of the buttons are named from frame 2 !!!!
So even though I have skipped frame 2 the unnamed objects pick up frame 2's names and label the unnamed objects.
So I would think the player would skip over frame 2...like a hard drive would indexing....but rather the flash player acts like a tape recorder having to seek to a position in the timeline.

Huge bug in iPhoto since 9.3

I used my iMac with Snow Leopard and iPhoto 9.2 and all was fine. Last Summer I bought my MB Retina with Mountain Lion and so I was able to use iPhoto 9.3. Several months I imported photos and then I installed aperture 3. I found out, that the focusing points are missing on all photos that are imported with iPhoto 9.3 or later. All photos imported with 9.2 or earlier were fine.
So I deleted all photos since summer and imported them again with Aperture. Luckily I'm not trusting Apple that much, so I stored all my original photos additional to an extra harddrive outside iPhoto.
I told the bug to the support, but it looks like, no one cares about. I've just updated to 9.4.3 and the bug is still there.

Hello Harry468,
please check the following, if iPhoto realy destroys the your photo data upon import, or if the problem is at any other point:
open Finder
rightclick on the iPhoto Library ->> leftclick show contents
you are now within the iPhoto Library
search the Masters or Original folder
within one of this folders you find your events and within the events the single photos
COPY one of these photos directly to the desktop and import
it directly from Aperture..
Are Focus Points correctly shown?
If yes, then iPhoto doesn´t destroy the data, but nevertheless the old workflow can´t be used, because importing to iPhoto seems to make it impossible to use the Points in Aperture.
And yes, I would also call this a bug, even if there are workarounds.

HUGE BUG printing Booklet from Acrobat Pro 11.0.10

I spent an hour chatting with Adobe support in India. They could not solve this issue.
I submitted a BUG REPORT at Adobe - Feature Request/Bug Report Form
Here is the BUG Report:
******BUG******
Concise problem statement:
Steps to reproduce bug:
1. Export individual pages from InDesign as pdf (16-page booklet, each individual page is 5-1/2" x 8-1/2")
2. Open pdf in Acrobat Pro 11.0.10
3. Choose actual size, then choose booklet, and print. (printer contains letter-size paper, and page set-up is set to 100% scale.)
Results: The printed booklet is the WRONG SIZE! The pagination is correct as usual, but each individual page is being REDUCED, and now each page image is too small, and there is now a GAP between pages, and the entire booklet is useless. If you can, please see case number: 0186447426: support chat: it covers everything we have tried so far ... (We tried everything they could think of, but all attempts failed.) This bug was introduced somewhere along the line with Yosemite.
Expected results: As usual, when printing booklets from Acrobat Pro, we expect the print to be the right size, the same size as the InDesign doc, and as it has been printed previously by Acrobat Pro prior to Yosemite. Thanks for fixing this disaster of a bug. Please contact me if you need further info, copies of the individual page pdf, etc.
I am literally stuck. I can go through the laborious process of using InDesign to "print booklet" to a postscript file and use Distiller to make the booklet pdf, but under Yosemite, I am prevented from installing print drivers unless that printer is locally available on my network. Unfortunately, the printer is located at my client's place of business.
I realize there is typically a leap-frog effect between operating system updates, hardware, and application updates, but combined with other Yosemite issues, this Acrobat Pro bug is killing my business.

DrStrik9 (sounds a bit poisonous to me!),
The issue, regrettably, is that Acrobat is performing as designed. And it has nothing to do with either MacOS 10.10 or anything new or different with Acrobat 11.0.10 (versus earlier versions going all the way back to the initial implementation of the booklet printing feature). And this isn't directly a printer driver issue, either! The same behaviour occurs both on MacOS and Windows.
The problem, simply stated, is that the Booklet print option in Acrobat (and Reader) is attempting to avoid loss of content due to the paper's non-printable margins. The scaling factors in the Size print option are not utilized at all in the Booklet print option. The Booklet print option attempts to fit two logical pages of your PDF file into the printable area of each physical sheet of paper. Assuming that your printer's Letter page is defined as having a printable area of 8"x10.5" due to a 0.25" non-printable area surrounding the page, then the Booklet print option will force each of the 5.5"x8.5" pages of your PDF file into a 5.17'x8" area centered on each half of the 8.5"x11" printed sheet.
There are three workarounds that I know of:
(1)    Many high end printers have booklet printing capabilities in the printer or printer driver itself. Check the detailed driver options to see whether in fact your printer / printer driver does support a booklet printing option. If so, try that first. That would likely solve your problem.
(2)    Assuming that this is a PostScript printer, edit the .PPD file for the printer you are using to to modify the specification of the Letter printable area. In the PPD file, you will see an entry similar to this:
    *ImageableArea Letter/Letter: "18 18 594 774"
or
    *ImageableArea Letter/US Letter: "18 18 594 774"
Edit the entry to change only the four numbers as follows:
    *ImageableArea Letter/Letter: "0 0 612 792"
That indicates to the PostScript driver that there is no unprintable border on your pages. Then save the .PPD file. I would then suggest rebooting and then trying to print. Note that the side effect of this is that Fit and Shrink oversized pages options will not take into account the non-printable area of your printer.
Note that a similar hack can be done with Ledger (i.e. 11"x17") page descriptions in the PPD to fix a similar issue affecting printing 8.5"x11" pages to 11"x17" sheets as booklets.
(3)    There are some very reliable third party plugins for Acrobat that provide full advanced document imposition capabilities, creating what are known as printer flats as a new PDF file from your logical pages. There are n-up, booklet, step-and-repeat, etc. options galore in such packages. Examples include Quite Imposing and PDF Snake. I have personally used Quite Imposing for nearly 15 years for this purpose and can vouch that it works beautifully. I don't have personal experience with PDF Snake, although it is less expensive.
Good luck and let us know if any of this helps you at all!
          - Dov

IOS 5 huge bug ! iPad

Hello I have just discovered an enormous bgt in iOS 5, which intervenes only on the iPad.
I am understandable, when we download an application on the blind. One return automatically on the homepage with the photo of the application and marked load...
However now we return to the blind and however we download another application, magic the application précédament downloaded is not installed(settled)!!
Have you the same bug?
Cordially Martin

Sorry i'm french i correct my message ...
"Hello I have just discovered an enormous bug in iOS 5, which intervenes only on the iPad.
I am understandable, when we download an application on the store. We retourn automatically on the homepage with the photo of the application and marked load...
However now we return to the store and however we download another application, magic the application you have downloaded is not installed(settled)!!
Do you have you the same bug?
Cordially Martin"

Huge bug in messages in iOS6

Anyone noticed the massive bug in messages since iOS6? If you select any of your previous message threads that were there pre-update that show as coming from a name rather than a number, eg banking, companies, etc - the preview is there but then when you touch it to drill down it shows blank, go back and hey presto the entry has completely disappeared. Force close messages and it comes back - but only to do the same thing.
I don't think the messages are being cleared as they come back when you quit i think it is just a bug in showing the messages - but this really needs fixing quick!!!!
Pretty poor bug to introduce this really.
Edit: Actually already posted/spotted by other people https://discussions.apple.com/message/19635920#19635920
This needs fixing pronto!!!!!!!

Perhaps this is a stupid question, but I don't see anywhere that you said you saved the file anywhere. You just said you opened Pages, worked on a document for a while, then closed Pages. Did you ever, at any point, save the document you were working on to the desired folder on the external drive, or were you just expecting Pages to do that for you? If the latter, note that Pages cannot know where you want to save a file, and though it will do its best not to lose your changes to a document that has not yet been saved to a specific location, that document can only be saved temporarily to the system drive.
If you did save it to the external drive, but you either didn't see the document in that location at all when you got home or you saw it but it did not contain your changes, the only possibilities I see are user error or a serious problem with your system.
Also, note that you're getting some bad information here. The .DocumentRevisions-V100 is not stored on the "root drive" (whatever that is supposed to mean). It is stored at the root level of whatever drive the document in question is stored on, assuming that volume is formatted as HFS+. (If it isn't, there's a problem that applies to Versions, but not to the specific problem you have described. See Beware Lion’s Versions Bug on Network and Non-HFS+ Volumes.)
So, if the document has, in fact, been saved to the external drive, and that drive is not formatted as HFS+, then you will be unable to use Versions with that document, but autosave will still work just fine, and you should see your latest changes in the document regardless of where you are.

N8 Mail client huge bug with hotmail mailbox

Heï / hello everyone,
I just want to remote a bug to Nokia software support ASAP.
On the mail client, when a hotmail mailbox if configured.
When creating or answering to a mail:
- all acute accent are remplaced by "?"
- subject of the mail is remplaced by "? ??? ? ...."
- all word wrap are missing.
Does this problem happens any other user ?
Does Nokia Software care knows about this issue ?
Thank all !

Hey back,
Well, I discovered that the option "my name" of the email app on the Nokia N8 does not take over the windows live services profile name .
So now with this new 2011 version(unified nickname and user name), if we have fanzy name in WLM, with special caracters, it sent or reply to email with this same fanzy name, whatever we write in the option "my name" of the Nokia N8 email app.
On my ovi email setup (on Nokia N8) the option "my name" perfectly works, it takes over the usual one. BUT not with Hotmail account ! So be aware of that.

Big hugly bugs!

Similar Messages

Maybe you are looking for