Big Issue with BackUp
I made the back up (Z10) so I have the BBB file, my Z10 had an accident so I bought an Android phone while the ensurance is hiving me another Z10 but hey said it will take about 1 month, so how can I open the BBB file to import those contacts(phones, mails) into my Android, I use it for work please help.
Thanks
Currently, there is no software I know of to export from the BB10 .bbb backup files.
Two possible solutions:
Change the .bbb file extension to .zip, and unzip the file using normal zip app.
install IntouchApp and login. Then you upload the BBB file to her login and we'll push contacts to her phone - done! She can install IntouchApp from App Store and you can upload the file at IntouchApp: Import Contacts
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr........... -
Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)
Hello,
Does someone have issue with backup NCS via externally mounted location (NFS)?
I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
NCS/admin# backup ncs repository backup_nfs
% Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
You do not have enough disk space available in your repository to complete this backup.
DB size is 25 GB
Available size is 12 GB
Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
Stage 5 of 7: Building backup file ...
-- complete.
Stage 6 of 7: Encrypting backup file ...
-- complete.
Stage 7 of 7: Transferring backup file ...
-- complete.
I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
NFS share works perfect. I have checked it via NFS repository:
repository backup_nfs
url nfs://server2008:/nfs
+++++++++++++++++++++++++++++++++++++++
NCS/admin# show repository backup_nfs
NCS-130130-1135.tar.gpg
NCS-130130-1137.tar.gpg
NCS-130130-1157.tar.gpg
NCS-130130-1158.tar.gpg
test-130130-1210.tar.gz
Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
Does someone know how can I backup NCS system?
Thank youHow much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB....
The backup-staging-url is just for a space used to stage the backup before it is written----- -
Big issue with playing Flash movie in IE 6.0 with Windows SP2
This is a multi-part message in MIME format.
------=_NextPart_000_006E_01C699E5.68468390
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I face a big issue with Flash 8 movies playing in IE6 with
Windows XP =
SP2, as follows :
I have created a menu with a Flash movie for each button and
a movie =
with scrolling images,
and when the HTML page opens we need to click once on the
button or the =
scrolling images=20
to make-it working.
see :
http://piscine-et-spa.cybergraphik.net
Useless to say that the same movies are playing well in IE6
with Windows =
SP1 !...
Anybody can help ?
Thanks.
------=_NextPart_000_006E_01C699E5.68468390
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1555"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DVerdana size=3D2>I face a big
issue with =
Flash 8 movies=20
playing in IE6 with Windows XP SP2, as follows
:</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>I have created
a menu with a Flash =
movie for each=20
button and a movie with scrolling
images,</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2>and
w</FONT><FONT face=3DVerdana =
size=3D2>hen the=20
HTML page opens we need to click once on the button or the
scrolling =
images=20
</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2>to make-it
working.</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>see : <A=20
href=3D"
ergraphik.net</A></FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>Useless to say
that the same movies =
are playing=20
well in IE6 with Windows SP1 !...</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>Anybody can
help ?</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana
size=3D2>Thanks.</FONT></DIV></BODY></HTML>
------=_NextPart_000_006E_01C699E5.68468390--This is a multi-part message in MIME format.
------=_NextPart_000_0018_01C69A05.5FA39D70
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You've run into the famous IE Flash fix implemented in SP2.
Supposed to =
be a security thing .. yeah .. right. Upgrade Dreamweaver to
8.02 to =
get the fix implemented in the program or visit the technote
here:
http://www.adobe.com/devnet/activecontent/articles/devletter.html
Just don't forget to upload the Scripts folder and file. :)
--=20
Nancy Gill=20
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp=20
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)=20
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A =
Beginner's=20
Guide, Mastering Macromedia Contribute=20
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web =
Development=20
"Pascal" <[email protected]> wrote in message =
news:[email protected]...
I face a big issue with Flash 8 movies playing in IE6 with
Windows XP =
SP2, as follows :
I have created a menu with a Flash movie for each button and
a movie =
with scrolling images,
and when the HTML page opens we need to click once on the
button or =
the scrolling images=20
to make-it working.
see :
http://piscine-et-spa.cybergraphik.net
Useless to say that the same movies are playing well in IE6
with =
Windows SP1 !...
Anybody can help ?
Thanks.
------=_NextPart_000_0018_01C69A05.5FA39D70
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2912"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>You've run into
the famous IE Flash fix =
implemented=20
in SP2. Supposed to be a security thing .. yeah ..
right. =
Upgrade=20
Dreamweaver to 8.02 to get the fix implemented in the program
or visit =
the=20
technote here:</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"
http://www.adobe.com/devnet/activecontent/articles/devletter.html=
">
http://www.adobe.com/devnet/activecontent/articles/devletter.html</A></=
FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Just don't
forget to upload the Scripts =
folder and=20
file. :)</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV><FONT
face=3DArial =
size=3D2>
<DIV><BR>-- <BR>Nancy Gill <BR>Adobe
Community Expert<BR>BLOG: <A=20
href=3D"
asp</A>=20
<BR>Author: Dreamweaver 8 e-book for the DMX
=
Zone<BR>Co-Author: =20
Dreamweaver MX: Instant Troubleshooter (August, 2003)
<BR>Technical=20
Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's=20
<BR>Guide, Mastering Macromedia Contribute
<BR>Technical Reviewer: =
Dynamic=20
Dreamweaver MX/DMX: Advanced PHP Web Development </DIV>
<DIV> </DIV>
<DIV></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pascal" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>>
=
wrote in=20
message <A=20
=
href=3D"news:[email protected]">news:e7r16q$7ko$1@forums=
.macromedia.com</A>...</DIV>
<DIV><FONT face=3DVerdana size=3D2>I face a big
issue with=20
Flash 8 movies playing in IE6 with Windows
XP SP2, as =
follows=20
:</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>I have
created a menu with a Flash =
movie for=20
each button and a movie with scrolling
images,</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2>and
w</FONT><FONT face=3DVerdana =
size=3D2>hen the=20
HTML page opens we need to click once on the button or the
scrolling =
images=20
</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2>to make-it
working.</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>see :
<A=20
=
href=3D"
ergraphik.net</A></FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>Useless to
say that the same movies =
are playing=20
well in IE6 with Windows SP1 !...</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>Anybody can
help ?</FONT></DIV>
<DIV><FONT face=3DVerdana
size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana =
size=3D2>Thanks.</FONT></DIV></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0018_01C69A05.5FA39D70-- -
Since Nov 11 all Iphone and Ipad of our company have very big issues with email synchronization. We all synchronized with Exchange server.
In the past nobaody had issue.
Some of our users have IOS 6 and others IOS 5
Messages arrived empty and it is impossible to download them.
Nobody is able to answer ????
I have the same issue with my personnal Ipad synchronized with exchange also.This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.
-
Issues with Backup-GPO Scheduled Task as a non-admin account
I'm having an issue trying to get a daily backup of domain GPO's from a non-administrative account. I'm using Powershell 2.0, the Backup-GPO cmdlet runs fine as a standard user, but when I run the same cmdlet with the same user, but with a scheduled task,
the backup does not produce valid output. The command I run is:
[batch file called by scheduled task]
powershell.exe d:\loj\psps.ps1
[psps.ps1]
import-module grouppolicy
backup-gpo -all -path d:\loj
The specific problem is, all other files created by the backup are created successfully except the 'gpreport.xml' file found directly under the folder identified by the backup ID. All of the subdirectories under DomainSysvol\GPO contain xml files with the
appropriate data, and the Backup.xml and bkupInfo.xml files are also created normally. The manifest.xml file is also created normally in the root directory.
The gpreport.xml file however is malformed. It contains only two bytes of data, FF FE.
The reason this is a problem is that the xml in the gpreport file can be used to restore whether the GPO is 'enforced' and also contains link data. Using this when restoring the GPO's makes the process a lot less painful.
Running the batch file while logged in interactively as the user removes the problem, without making them an administrator.
I've been using a test domain to investigate this, I tried adding the user in question to every local group except administrators, gave it full control to the destination folder for backups, the powershell executable, batch and ps1 files. Resultant set of
policy access has been granted (rsop.msc run-as the user tested fine). The scheduled task stores credentials (needs to run when the user is not already logged in) and runs with the highest privileges.
The only possibly related error I could find in the logs was this:
This error goes away if enough group memberships are added to the account or alternatively if this string is added to the security descriptor for the LanManServer service: (A;;GA;;;S-1-5-21-1191697313-1384311512-914143962-35706), which just adds
generic all to this account by referencing the SID. However, despite the fact that the error is no longer raised, the issue with the gpreport.xml file remains.
Does anyone have any ideas on why this is happening? At this point my best guess is something UAC related, since the gpreport.xml file is created like normal if the user is made an administrator on the local machine (I'd rather not do that in production).Hi Fergubru,
Thanks for your posting.
To troubleshoot Task scheduled that a task ran, but the program that should have been executed did not run correctly.
As AZ said above, some programs require elevated privileges to run correctly. If a task is running a program that requires elevated privileges, ensure that the task runs with the highest privileges. You can set a task to run with the highest privileges
by changing the task's security options on the General tab of the Task Properties dialog box.
If a task program does not run correctly, check the history of the task for errors. For more information, see
View Task Properties and History.
For the Event ID 4656, this is an Audit log, This event will be Audit Success or Audit Failure depending on whether the user account under which the account is running has the requested permissions or not.
For more detailed information about Event ID 4656, please refer to this article:
http://www.ultimatewindowssecurity.com/securitylog/encyclopedia/event.aspx?eventid=4656
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello, I have a Toshiba laptop with Windows Vista and I decided to download apple safari web browser but I am having a big issue, every time I open Safari it pop up a window saying ''Safari has stopped working, windows will find a solution for the problem'' but it never finds any solution. please help!
My laptop:
Toshiba A215-S4767
2gb ram
AMD Turion 64 x2 mobile technology @ 2.2GHZ
250gb HD + 80 GB external drive
Ati Radeon X1200 with 128 mb
High Definition 15'4 Screen
Realtek High Definition Audio
Please Help!Probably the reason you have not had a response is because within this forum there is a long list of threads that talk about the issue and a resolution...
This is what I suggest...
Go here... http://filehippo.com/download_safari/
Download and install all versions up until 3.0.3..
This should leave you with a working version of Safari... 3.0.4 for some reason will not open and run on various Windows Systems...
I am using version 3.1 525.6 from the ADC site.. they are currently at 525.9..
I had the same exact problem... I stayed at version 3.0.3 because of the same problem. I installed version 3.1 525.6 from ADC and had really good luck and good speed increases with application opening...
You must follow these instructions carefully...
Uninstall Safari from your system.. Then look for all traces with your Documents and settings Folders for Safari ... These folders and files must be deleted and completely removed from your system first.. Then start installing from Beta 1 - Version 3.0.3..
The version I am using is downloaded from the ADC site, these versions cannot be released by anyone but ADC, and therefore I cannot link you to any of these versions...It is a violation of the ADC Membership Agreement..
If you search the forums for threads of a similar nature you should start finding information on how to fix it for your system but read through everything first...
Message was edited by: heath28m
Message was edited by: heath28m -
Hello, I have a Toshiba laptop with Windows Vista and I decided to download apple safari web browser but I am having a big issue, every time I open Safari it pop up a window saying ''Safari has stopped working, windows will find a solution for the problem'' but it never finds any solution. please help!
My laptop:
Toshiba A215-S4767
2gb ram
AMD Turion 64 x2 mobile technology @ 2.2GHZ
250gb HD + 80 GB external drive
Ati Radeon X1200 with 128 mb
High Definition 15'4 Screen
Realtek High Definition Audio
Please Help!If this question is pertaining to Vista not finding a solution to the problem then it probably will not, if it did it would provide you with a link to the Apple site for an updated version of the software.
Since this is a beta software there will probably not be a solution found for the following reasons...
1. Safari is still in BETA stage for testing purposes.
2. Microsoft is not going to issue a patch.
3. Final solutions to program incompatibility, system settings, setup, and issues with components have not been finalized. This cannot be documented with final instructions on how to fix the issue or update to the next version since an official version has not been released.
4. Current support for Safari BETA for Windows is currently given in this forum until that day arrives. Given a thorough look and search of the forums will render several resolutions for your possible issue, being that it could actually be several. Like many of us have done, we have found solutions. links, and ways to get the browser running on systems such as Windows XP Professional, SP2, Vista, and Vista SP1.
5. If you are having a problem with Vista, I would look to Microsoft Support for the answer. Many really good resources there as I have been there quite a few times and did not even have to make a post to find a solution for my XP system, which did the same thing to me when installing and trying to run version 3.0.4 of the program.
Search the forum thread for 'Safari crashes', there were three threads I posted in and in which I have found the solution to my issue by reading and following the problem as it developed...
Hope this helps.
Message was edited by: heath28m -
Big Issue with access applicationwise using SSO (windows AD)
Hello BO Guru's,
I have one big issue. i will try to explain my scenario here in brief.
Scenario
Currently we have 3 application A,B & C in production and SSO is configured using windows AD auth
application -> User group -> Access -> Win AD group
A | UG1 | Infoview | WD1
B | UG2 | Infoview | WD2
C | UG3 | WebIntl | WD3
Here Infovew acces refers to: View objects & refresh object of applicationwise.
WebI refers infoview access in addition to that copy document from corporate to personal folder\ category and scheduling access.
Note: corporate Folder\category & universe\connection right given appropriately.
Issue
Suppose user a belong to WD1 means wuld have access to application A with infoview access. now after some time i.e. 2-3 days when user a is deleted from WD1 and and added to WD3 means would have access to application C with WEbi access. But issue is
When user a logs on to infoview sometimes appllication A is also visible along with application C which is not correct securitywise.
Could you please help me as how resolve it? and please share your views if anybody has faced same prob before
I think some where userwise security setting will be stored causing same.
Thanks & RegardsMany Thanks Julian Jimenez,
FYI, I am on BOXI R3.1 with FP1.8
I dont have access to SIA to restart CMS.
any i will get it done.
But what i was thinking of, there would be some cache maintned for user profiles of last logins. so it may remember last user profile login which may causing apllication A still shown under corporate folder for him\her.
But i am not able to get how can i achieve it?
Please share some workaround if any body has faced same issue before.
Thanks & Regards
Edited by: naughtychintu19 on Sep 14, 2011 12:23 PM
Edited by: naughtychintu19 on Sep 15, 2011 8:59 AM -
I'm having issues with the backup function. I can get started but somewhere during the backup, everything completely locks up and I have to reboot the computer so the backup is never completed, I deinstalled iTUNES and reinstalled, that'd didn't help. I restored the iPAD software and tried to restore using my past backup, that didn't help either. Any suggestions?? I'm getting desperate
Hi,
For error 0x80070002 error we may use the workaround mentioned in this KB article (scenario 2), follow the instructions and modify the video folder.
Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
As we have sheduled the backup task, we could take a look in
task sheduler to verify if a backup action is occurred.
For the backup folder stayed on March 8 is the date that the the root folder modified, we may open the root folder and take a check on the date modified volume in Windows explorer for the new modifications.
For the last backup displays never, this may be caused by the error code here. Take a try to add the video folder mentioned in the error and then check the status of the last backup.
Hope this may help
Best regards
Michael Shao
TechNet Community Support -
I'm having a big issue with scripts and sites I need.
I am an Etsy shop owner and always been able to access my shop just fine all the sudden about three weeks ago I cannot log in to my shop on ff. I can view the Etsy site but when I try to log in it just loads and loads and will not let me. I know it is the script bc I added a script turn off add on and I could log on but Etsy will not let you have it turned off to edit items if your shop so I had to download chrome just to go to my shop which is annoying, I do not like chrome.
Other than that a few more sites like creative market and a few blogs will not load anymore for me. I have already re-set and that did not work. Also I get a lot of script not responding plugin popups that freeze and crash. This is really annoying. Does anyone know a fix? Thanks..You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Big issues with Leopard and writing to NAS units or Windows servers
Quick run down of the issues
1st client has a number of G5's all running 10.5.2
NAS units running embedded Windows SBS 2003 or Windows Storage .
All shares have worked fine before the macs were upgraded to Leopard.
Now the macs can see the shares, mount and write to the folders. But immediately afterwards all inherited permissions are stripped from the folders/files and only the owner of the file/folder can access them. All other mac users have no access. It seems that Leopard is ignoring the inherited permissions of the share and just applying its own.
2nd Client
Number of imacs running 10.5.2. Can see the mac shares on the server running Windows SBS 2003 fine. The minute any files are copied you get the progress of the items being copied, seems to appear on the server and then just hangs.
In most circumstances the copying crashes the whole server.
Have tried binding the imacs to AD, but no joy. SMB sharing (with Appletalk turned off) dosent help either.
Somewhere there seems to be some gremlins with AFP and windows shares
Anyone have similar issues or bright ideas ?Alright I'm running into the same issue with my iMac 10.5.2 connecting to windows server 2003 r2. I'm about to go nuts, I can log on to the server, open files manipulate them and sometimes I'm able to save that file back to server but I'm unable to transfer almost anything new to the server, (I can create new folders though). When you try to transfer something to the server I get "progress of the items being copied, seems to appear on the server"... then it hangs, a corrupt file is left on the server. If you try and open that file I get an error message on my mac, "OS X is currently using this file" on a pc it will say the file is corrupt. I'm forced to carry my psd files on a flash drive and walk to coworkers machines to upload it to the server... (haven't had time to set up parallels). I'm the only mac in the office and I'm seeing why I've been so spoiled at past jobs where its 100% macs.
-
Big issues with swicthing videos in playlist: oldStreamName problem
So I've built a player to play playlists and it uses my own DynamicStream class (not the abobe one). I've ran into an issue with playing the same video multiple times. In this app there will be many occassions when a video may be repeated in the playlist up to 3 times. Here's an example of the problem:
Lets say I have 2 videos in a playlist and they are the exact same video. They both are the low birate version. The fist video dynamically swiches to different bitrates seamlesly as planned. If I fast forward the stream to the begining of the second video it starts playing and if my bandwith is ok it wants to switch to a better bitrate. It swiches but instead of being seemless it plays the second video from the begining again. So, I'm thinking this is where oldStreamName comes in. So I add the oldSteamName and make sure its correct, but the problem with that is if the same video is in playlist more than once then the transition never even happens.
Any ideas or suggested work arounds?
Thanks,
Adamanyway to counter this problem when I switch to a diffrent stream. I close the current netstream then I create a diffrent netstream name with "str"+new Date().time(); or whatever method you use to create a timestamp This way the stream will always have a unique name. Keep in mind that in the administration console it will show a bunch of netstreams but at some point in time GC should collect those streams thereby removing them from the admin console. I'm not sure about memory consumption using this method. I've just experimented with it without doing an actual load test. Please post back on your findings. I'd love to know if this is a good solution.
-
I have to unplug my time capsule and reboot it. Is there a diagnostic routine I can run or any error detection I can look for?
You are absolutely right.. when apple changed significant features in Lion and Mountain Lion .. they introduced a bunch of issues into networking which are bugs to this day..unacknowledged.. and without much that will fix them.. other than your reboot strategy.. which is like.. well that other OS.. where continual reboots are considered normal.
Old TC may also just suffer from age.. we continually tell people they have a lifespan.. 3years is the reliable span.. after that expect anything.. sudden death.. slow decline.. continual hassles and problems. If the backups are important to you.. then it is telling you in a very clear way.. replace me.. I am no longer happily providing services promised.
Now to specifics.. we don't know what the problem is.. if we knew we could give some work around.
The problem is odd in that it doesn't affect everyone.. if it starts .. people find it starts several months in to ownership.. it is never cured.. or even curable.. something like DNS or ARP table is being lost.. but it is not either of those things.
Is there a diagnostic routine I can run or any error detection I can look for?
Nothing much shows up anywhere. Including the TC log or local logs. It simply has lost the TC disk but not internet.
So.
Some things do help.
I don't know if you have pondini's resources.. TM is a complex piece of software.. it has multiple issues.
http://pondini.org/TM/Troubleshooting.html
Look at A1 .. load the widget.
A5 .. verify the backup.
A4 .. reset TM.
All of those things can help.. look at some of the typical problems.. C12 and C17 being the most common since Lion.. and exacerbated in Mountain Lion.. not fixed.
Some suggestions.
1. Keep names short, no spaces and pure alphanumeric. See C9 http://pondini.org/TM/Troubleshooting.html
2. Do not use 7.6.3 firmware... go back to 7.6.1 or even better 7.5.2 on an old one.
Firmware downgrade is easy in new utility. Hold down the option key whilst selecting version.
3. I recommend a very short dhcp lease time.. 20min for example. In whatever device is the router .. that can help keep things up to date.. and use dhcp reservation again to see if the address info helps to keep things updated.
4. Do turn on ipv6 local link.. which you need to anyway with 6.3 utility.
http://support.apple.com/kb/TS4597
5. If you are using a desktop.. an external drive is faster.. more reliable and easier than TC for Time Machine backups..
6. Consider using CCC or another backup software.. if you want to continue to use network drive.
7. Although using 6.3 airport utility has some advantages.. it is also devoid of a lot of tools that are in v5.6 airport utility.. well worth loading into at least one computer on the network.. if you only have Mountain Lion now here is one method.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
Issue with Backup NNHOP TE Tunnel with Auto-Tunnel Backup !
Hi All
I am trying to implement NNHOP Backup Tunnel(Manual) to achieve Node Protection. The Network Topology is attached along with.
I am using TE Auto-Tunnel to achieve Link Protection via Dynamic Backup Tunnels.
I am building NNHOP Tunnel from core1.pop1(10.0.2.1) to core1.pop2(10.0.5.1) and One Hop Dynamic Primary and Backup Auto-TE Tunnels are being dynamically between the core routers .
I have kep the autoroute metric for NNHOP TE Tu100 more so that under normal no problem condition traffic between edge routers does not flows across this path as Tu100 will be preferred without altering for all the routes learnt behind them
Now the problem is for Node Protection when core2.pop2 is down, the traffic gets rerouted via core2.pop1 but not over Backup NNHOP Tunnel and instead over the the Primary Auto-Tunnel (as they have better metric) between core1.pop1 and core2.pop1 and core2.pop1 and core1.pop2. The Traffic is still flowing between my edge routers but not over my desired LSP..
I am not able to control this beahviour as if I don;t alter the metric for NNHOP TE Tu100 all my traffic starts flowing across them during normal no problem conditions too.
Any suggestions how to optimise the traffic flow ?
Regards
Vaibhava VarmaHi Olivier
I am not considering Manual Primary Tunnel for now. WIll give it a thought later.
Meanwhile I have achived the solution for my above problem using event manager applet. Everything is working fine now.
Also I don't think Manual or Auto-Tunnel will make any difference as the underlying issue here is presence of a Primary NHOP Tunnel towards backup
core router in the path of NNHOP Tunnel which is causing the NNHOP Tunnel to be not preferred. The only way it seems to solve this issue to me is to not have any Primary Tunnel NHOP Tunnel between the PLR and Backup Core Router.
Regards
Vaibhava Varma
Maybe you are looking for
-
How do I reorder the form results from a non-BC form in Muse?
I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form. How do I ensure the form results emails maintain the order of t
-
Can apple erase a hard drive with filevault 2 turned on and then reinstall OSX?
Can I take my MacBook Pro to an apple store and have them erase the hard drive and reinstall OSX? If so how much will that cost me?
-
For the user who plan to buy HyperX PC3200/DDR 400
as the topic said, plse be aware of the HyperX Ram module model name is KHX 3200A 256/512MB KHX 3200 256/512MB the model name with an 'A' at the back will not perform at CL 2, unless you run it at DDR 333. even the Kingston website it say that the 3
-
I have Chinese key board can't get rid of it
i have Chinese key board can't get rid of it
-
Hello I hope some one can help. But my movies are not synicing with my Iphone 4S. I am using Itunes version 11.1.3.8. On my itunes tab I have sync movies checked and the check mark the movies I want to sync, But when I go to Videos on my Iphone I onl