Big mystery - simple animation now not work safari and chrome

A simple edge animation - basically a slide show with a start and stop button - which definitely worked some weeks ago with Chrome now does not work - nor with Safari.
http://peachesincrime.com/swf/HardlyStrictlyBluegrass2012/HardlyStrictlyBluegrass2012.html
First thought is that both of those browsers have changed their scripting behavior and "so sorry Edge users"
But having noted that there is no fundamental difference between that and all the other animations on http://peachesincrime.com/underthehood.html I reduced the stage size from 1388 x 933 to 800x600 and it seems now to run. I have not yet ascertained what the top limit is.
Customer wants to maintain resolution or even increase it in the future to show images in full glory on retina screen resolutions.
Is this a problem with Edge and is there any way round this?
thanks

I have updated the animation with images which match the stage size precisely. Initial testing suggests that it works now with chrome but so far on one machine tested, safari seems to run the animation but at at 1/20 the speed of the other browers.
for anyone interested in trying to figure what is causing all this I have moved the original faulty files referred to above to another folder http://peachesincrime.com/swf/HardlyStrictlyBluegrass2012-2/HardlyStrictlyBluegrass2012.ht ml

Similar Messages

ISE Guest portal CWA - Webauth exit button on Login Successful page not working (Safari and Chrome)

Hello
Has anyone else experienced the issue where this exit button works when IE is used to login to the ISE Guest portal, but not when Chrome is used. Same for Safari (from IPAD).
Sent from Cisco Technical Support iPad App

Google Chrome is not a fully supported browser for use with the Administrative User Interface of the Identity Services Engine (ISE), Version 1.1.3 and earlier.

Animation does not work in Google Chrome

I was using Chrome as my defualt for testing my Edge projects. At some point, I changed the way divs were stacked and animated the position of one of the divs and the animation never worked thereafter. That said, It works fine in Firefox and Safari. Anyone have any insights as to what could be the problem?
Is there anything I can provide that will give better clarity to this issue?
Here is a link to the project:
http://aaronjames.me/sandbox/menu-icon/menu-icon.html

Yes,
The animation is not working on google chrome on my device.
Could be because of publish setiings.
regards.

InDesign DPS: Simple animation does not work in folio?

I'm building a simple recipe app using InDesign CS6, using the Digital Publishing tools.
On one page I applied an animation, "fly in from bottom" to an object.
When I eventually build the folio and view it on my ipad with the Adobe Content Viewer, the animation does not work on that page.
I've watched a couple tutorials on how to use the animation tools, how to set the path, etc. but none of them mention any other steps for getting the animation to work once you build the folio.
Am I missing something?
Thanks!
Bruce

Okay, I'm gonna try helping out on this.... I don't think layers have any effect on this, or at least I haven't noticed they do, the just help keep you organized and maybe for arrangment...
So....
You can just lock the background, it isn't involved, it is just the background.
1. Make your button to open/start the sequence and make your finished state and an empty box. In this case the button the button is just a text frame. The finished state is a shape, text frame and two lines grouped (to make an "x" for the close button). In your case it will be your image sequence and the button to close it. Have all the elements of the finished state grouped.
2. Select both groups. In the object states panel, hit the new button. you should now have a multistate object with two states. One empty state and one state with your sequence, etc..
3. Now select your open button. In the button panel, choose the add action button "+" and choose Got to State (or go to next state) and make sure the object is the multistate object you just created. For the state, choose the state with your sequence.
4. Now select your multistate object. In the object states panel choose the state with your image sequence and close button. Select your close button. Go to the buttons panel and add an action to go back to the empty state.
Test it out, it should work fine now. I don't have an image sequence handy, but you may have to mess with the autoplay settings, etc. but it should work just fine.
Notes of interest: As buttons display only as raster on an iPad, I find it best to make a clear button on top of the button graphic. That way the button can be vector. and the clear box becomes raster.
I really, really reccomend watching some of the videos on Adobe TV, they explain and review a bunch of this. Also, there is an app called DPS Tips App by Bob Bringhurst for free on the Apple Store, he explains all the goodies quite well. You can also use Wallaby to convert indesign animation to flash and then HTML5, but that gets more complicated and it can also have a load delay. Good Luck!

My edge animation is not working on Google chrome

Hii..
My edge animation composition is working absolutely fine on Mozila on google chrome it starts well but all of sudden my background image disappear and animation looks ugly without background image..
My animation link is
Untitled

Hi Newton ,
Can you try out one thing. We suspect this issue is caused because of the anti-scaling which we apply.
Just try to disable anti scaling.Follow the steps below :
This scale factor can be changed from:
1. Close Animate
2. Open the preference folder:
a. Windows: C:\Users\{username}\AppData\Roaming\Adobe\Edge Animate\4.0.0\
b. Mac: /Users/{username}/Library/Prefrences/Adobe/EdgeAnimate/4.0.0/
3. Open the AppPrefs.xml file in a text editor.
4. Search for the Current line in AppPrefs.xml:
<key>SvgAntiScaleFactor</key>
<float>10</float>
Update this to:
<key>SvgAntiScaleFactor</key>
<float>1</float>
5. Launch Animate.
However note: This setting will work only for new animate content that you create after this setting is applied - i.e it will work only for newly pasted SVG’s in a new composition.
Exiting Animate compositions opened after applying the setting(Step 5 above) will still show the same problem. You will need to delete the SVG and copy-paste again.
Do let us know if this solution helps in your case too.
Thanks and Regards,
Sudeshna Sarkar

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

Soical buttons not working in firefox & Chrome but OK in Safari

My webiste has been up and running for a month now but I've now noticed (among an array of other Muse bugs... aaaggghhh) that the 'Facebook Recommend and the 'Pin it' social widget buttons don't work in Firefox and Chrome but they do in Safari?
http://www.thinksmartresumes.com.au/parthorus-resumes-design.html (freebie tab)
Also on this page, the 'LinkedIn share' button works fine in Safari and Chrome but not in Firefox? See screen shots...
The Muse Team (ie Danni Beaumont) clearly state in all the tutorial videos that they guarantee multi-platform user friendly code.... I spend half my day finding bugs between different browsers? Not happy.

I am having similar issues - the URL that the plugin insists it wants to have complete (with http:// at the front) is being concatenated with another "http://" when it is rendered on the page.
This is the URL I have in the properties for the button:
But this is the URL that shows up in the Share dialog:
If I take the http:// OFF the property for the button (so, I start with "www...."), the widget doesn't render. I get an error that the thumbnail can't draw.
Yes, annoying.

This animation will not work, neither does embeded youtube videos

So this site https://www.navo.navy.mil/cgi-bin/animate.pl/metoc/74/84/0-0-17/0 animation does
not work (in either FF or Safari on mac, works great on any browser on xp).
Anyone know why???
Also, if I try to look at a embeded youtube video it shows a black screen unless I scroll so that the
video is partially blocked (top or bottom).
Anyone?

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

I downloaded Windows 10 and my Simple Pass is not working.

I downloaded Windows 10 and now my Simple Pass is not working. I get a message that HP Connected Remote isn't responding and to be sure the service is running. I went under programs and repaired it but I still get the same message. Thanks in advance for your help. Please don't make it too complicated.

DUPLICATE POST
Please see: https://discussions.apple.com/thread/5513386?tstart=0

NVIDIA Tools now not working with PS CC, is there any other add-on besides NVIDIA that will open .DDS files in photoshop?

I had no problems with CS6 PS, but since I upgraded to PS CC, NVIDIA Tools is now not working and crashes when I try to reinstall the plug-in into PS CC. I checked NVIDIA's forums and found ZIP from them about this problem. So I am asking in here, is there another plug-in that will open .DDS files in PS? I am using Windows 7 Ultimate x64 for the OS, and I know the PS CC is 32 bit. Until I can resolve this issue, I am unable to do repaints of PMDG aircraft for my VA. Any suggestions would be greatly appreciated.

I had a similar issue but i solved it following the instructions explained here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA.
I also reccomend you to install the bbswitch package which disables NVIDIA discrete graphics card when isn't used.

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Sessions not working in Firefox, Safari and Chrome, but working in iexplore

Hi,
I have been running Tomcat 5.0.18 jdk 1.4. and have just upgraded to Tomcat 6.0.24 jdk 1.6..
I have an app that you need to log on to in a jsp page. When succesfully logged in it redirects to a framed page with 3 pages in it.
All elements of that framed page check for a valid session, if there is one, it displays itself, if not, it redirects back to the log on screen.
This has worked fine for years in all browsers. But since upgrading, in Firefox, Safari and Chrome, when the parent framed page jsp checks for a session, its fine, it passes, but when the other sub-frame pages check for a session, it comes back as a new session, i.e. its not picking up the session that has just been validated and redirects to the login page. Iexplore still works fine. i.e. all 3 pages validate ok.
Any ideas why these browsers are not pickng up the session?

As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
If that fixes it, then I guess the pages load too quickly.

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Firefox will not open Version 4.01 (tried to download new version), on MacBook Pro running 10.6.8. Safari and Chrom both work OK

I cannot get on-line with Firefox. It simply will not open any page. I'm told it cannot make a connection. And yet both Safari and Chrome work fine, hence it is not a connection problem.
Moreover, when I started with Chrome, it offered me the option to export bookmarks, but only from Safari. Firefox never appeared in the import box
I was using Firefox 4.01. I tried to download the new version, dragged it to Applications, but 4.01 remains in situ. I work on a MacBook Pro running 10.6.8

Cannot connect after upgrading Firefox
* https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
Firefox cannot load websites but other programs can
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
Check and tell if its working.

I've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

Typos mad = and
Receive = retrieve

Big mystery - simple animation now not work safari and chrome

Similar Messages

Maybe you are looking for