Big n97 problem

I did a hard reset on my phone to free up C: memory, but when restoring my data using ovi suite my phone crashed. Now my phone is slow responsively, if at all, and a further hard reset (repeatdly to be honest) has failed to rectify this problem. I also can't get the phone to connect to my pc and can't try to restore the phone again.
Anyone have any ideas on how to fix this problem???
Solved!
Go to Solution.

1. What if you Hard-reset and do not restore any backup at all ?
2. Hard-reset does not touch E: Mass. What if you have some "problem" in E: Mass ? What if you format E: Mass ( but this is extreme measure )
Using Y-Browser, I see the Z: ROM drive with size=0 where I think the firmware is.
Name: RomDrive
Fsys: Composite ( all other drivers are FAT )
Type: Rom
Attr: Write Protected
Attr: ROM
I guess the Hard-reset should execute some script ( probably stored on Z: ROM ), that includes reformat your C: Phone and install stuff from Z: ROM. Without backup anything and with a blank E: Mass you should be fine to start from scratch.
Regards
Marcio
N97 RM-507 code 0575400 / 0580761 firmware 20.2.19 ... and no Mass Memory anymore.

Similar Messages

Email and big wifi problems.

Email and big wifi problems.
Why does it take 6 minutes to send a photo attachment when my iphone 4 will do it in 30 to 40 seconds ?
Why will my email account be recognised and log on only half the time?
Why does the wifi keep dropping out?
Why does the speed and signal vary when I'm sitting two feet away from by wifi router?
All settings in my phone have been reset twice as per advice from vodapone

Thanks very much, jjgraphics. I will grit my teeth and try India once more, as you suggest, and then get in touch with the moderators.
Karen.

Have Operating System 10.6.8, Mail Program 4.6. How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Big Eudora problem, small Finder issue-- related?

I use Eudora for my email, and unfortunately my big Eudora problem is not getting solved in the Eudora message board; after half a day of Eudora quitting unexpectedly and then working fine but just for a few minutes if I restarted my computer, now when I launch Eudora, my Finder crashes-- everything disappears but the background image, and the computer is frozen.
The reason I'm posting here is that before it reached this stage, there were other weird things that didn't relate to Eudora: I would try to launch Flash, and Flash couldn't open a new blank file. I would try to launch something else, and an error message would say that some component in a Library wasn't found. All of these things are not happening anymore; as far as I know, only Eudora is misbehaving, but one odd feature remains: every finder window is showing, next to the search field in the upper right, a large question mark, and next to that there is a folder icon. If I click on the folder icon, I'm taken to one particular folder in my HD that has no significance to anything that I can tell. If I click on the question mark, I get "the item can not be found." (Hence the question mark, I guess). But what are those doing there in every finder window? Is there supposed to be a folder icon at the middle-top-right of every finder window? I don't remember one there.
I have done an archive-and-install of OS 10.4.6, but the finder window business is still the same.
The hardware test CD that came with my PowerBook says all hardware is okay. Disk Warrior finds no problems. Disk Permissions are okay in Disk Utility. I ran Clam Xav, and it found four copies of viruses: three (called Email.Ecard-6) in my In box and in two mailboxes with older In messages, and one (called Email.Phishing.Pay-8) in my Out box. I put all of these files in the trash and restarted my laptop, launched Eudora and the finder crashed. I reinstalled Eudora and the same thing happened, although I had put the infected boxes back in place before reinstalling Eudora.
I don't know where the problem is.
Any advice, please?
Paul

Ciao Von Stripes,
I've just found the solution:
Open - System Preferences, then open - Spotlight
There is a list of categories.
Find - Files on the list, then click, drag and drop to the position number 1 and "voilá"
I hope it works for you too...

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help...

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help?

What battery life are you getting? Is it short when you are using the iPod? When it is sleeping?

The big iChat problems. Audio/Video (now completely broken in 10.7.3), the "not-authorized" problem

So, I am running iChat on OS X Lion 10.7.3 on an early-2011 MBP 13'' . These problems have been here for a while, though (I got my comp with 10.7.0). I have AIM/GMail/Yahoo connected..
One problem is the issue of non-authorized people. There is a list of "not authorized" people that I have to scroll past in my "offline" section of iChat buddies before I actually get to the real offline contacts. Big note here: All these people have the address (something)@aol.com. These contacts have come up as a result of my gmail connection. You see, a few months ago Gmail and AIM did this chat unification process where @aol.com contacts can be just added into Gmail for chatting. These @aol.com copies come up asking for an invite when the REAL AIM address person talks to me. The invites leave once I press decline, but then they stay on my list as not authorized. If I delete these "not-authorized" copies, the invites will come up again and the cycle will repeat. It is a nuisance considering how much of these false contacts are on my list.
Second problem is video/audio chat in general. This issue really applies on AIM/Yahoo—there is nothing for Gmail because people usually use the web interface which simply doesn't work with iChat video/audio. If the people used Google talk, the issue written below would probably come up.
See, what happens is that…(now in 10.7.3), video/audio chat is simply broken, simple as that. My contacts always tell me that an error has occurred when trying to accept my video chat invite. It simply doesn't work. They are using AIM desktop in most cases. When it DID used to work (to a very limited extent, I'll say; it was hit or miss earlier pre 10.7.3, now it's just miss), it was just video but NO audio. They could see/hear me, I could only see them. When I did audio chats, they hear me, I..don't hear them (so audio chats were pointless). The only case where this problem doesn't happen is where it's Mac to Mac, iChat to iChat. VERY limited in use of audio/video chat, if you ask me.

Hi,
If AIM contacts have been added to your Google Buddy List then I would login to Google and remove them from there (the iGoogle or GoogleMail web pages will show the Chat option)
Whilst they are still in the List then the Authorization request will probably be resent (In this case it is probably being generated by the method Google are using to add the AIM names as iChat only sends it once).
Google/Jabber Video chats is only iChat to iChat and so is Yahoo with iChat 6.
The Yahoo App streams Video which People can be allowed to see and Audio is added in as an Audio Chat.
The connection Process is not the same and iChat/AIM
Jabber and Google use Jingle to Connect (in fact Google's version is not that compatible with other Jabber apps).
This means iChat to the Standalone PC app or any Web Browser using the Google Video Plug-in (PC or Mac) or to any Jabber app that is using a Google ID (or a Jabber ID) will not work.
On the iChat to AIM on a PC.
This has always been a bit of a hit and miss affair.
Some people have no trouble but other spend ages trying to set things up and never find the solution.
This is the Original Users Tip (up to about AIM5.9)
A "replacement" for that tip that has not made it across yet.
I have yet to try Video to the Web Login version that is now on offer.
However I would limit the Bandwidth in iChat Menu > Preferences > Video Section to 500kbps (possibly try 200kbps for 1-1 chats) as you will not know the interent speed available to the Buddy if they are using the web login.
Comparisons
When you compare iChat actual functions to what you would like it to do it can appear to be limited.
On the basis that you would want your IM app to be able to have Buddies from other services listed in a Buddy list (combined) or Lists which apps do you know of can do that and Video to some of them ?
Adium and ProteusX can both have Buddies from the major Services ina Buddy List but don't do Audio or Video.
Yahoo and MSN both allow the other's Buddies in the list but I am not sure about Video or Audio chats
They cannot connect to Jabber or AIM buddies even for text chats.
Jabber does depend on the server you use and whether that does Transports for you to have text chats with other services.
Instructions for iChat.
Mercury IM is a JAVA version of MSN and still has not got to Audio and Video
Similar for aMSN
Gizmo5 and YakforFree both died...
Skype is Cross Platform but is only 1-1 in Video chat. (cost extra for 3 and 4 way chats)
Yahoo had dropped support for their Mac version now iChat has the Yahoo option (you can still download it - IT being the beta it has been for years).
2:40 PM Saturday; February 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Slew of N97 problems.

I'm sure some of these may have been addressed in the n97 bugs thread, but I do nto have time to read through 500 posts, and a post in that will simply be buried and forgotten in moments, hopefully I can find some hints in here.
the problems I am having with my n97 so far.
1. Photos taken with the N97 camera do not appear in the gallery. (an occasional photo may work, but more often not) they do however appear in the nokia photo browser from beta labs, but that doesn't allow me to do thigns such as upload to facebook, one of the reasons I decided to get this phone.
2. Widgets often stop working, and require a restart to get going again, however, on restart the pictures assigned to my favourite contacts will not appear, and the facebook app just says loading content forever, unless i remove the applications before I turn the phone off, let it start, than add the widgets to the homescreen after boot.
3. Songs in my music collection that are all tagged and have album art, once transferred to the phone, only some will show album art, some show none. and a whole pile of random songs will appear in an unknown folder, instead of there relevent artist or album name. If I browse to these songs theough the file manager, and play, all the track details will appear, but not when search my library through the music player.
4. Assigned ringtone will not work for a period time, simply playing the default nokia tune. even if I reset the tone, or change to something else, it will apear as if everything has worked, but then someone will call.. nokia tune again.
5. SMS from a select few (but not everyone) will appear with a timestamp 2 hours prior to when i received it, say I get an sms at 9:17pm, it will say 7:17pm, and bury down the list in my inbox. however this problem seems to have rectified itself recently, but no settings where changed.
I am running the latest software V11.0.021
i love this phone I really do, waited for it for months and months, has so many great features, but just way way to many bugs. i am a very tech savy person but I know that if i was like 95% of phone users that expect an item to simply 'work', this phone would have gone back a long time ago now.
If anyone can offer any fixes, that would be great, if not i figure that at the very least ths may make the software bugs recognised by nokia, and hopefully they an develop a fix. and fast.

Here is a link to the "clunk" sound issue.
http://discussions.apple.com/thread.jspa?messageID=2489411&#2489411
Hopefully this helps explain it.
Anil
MacBook Pro Mac OS X (10.4.6)

Big graphic problem on MacBook Pro

First, I appologize for my english but i'm french !
So, I have a very big problem since I have upgrade to Mountain Lion on my MacBook Pro mid-2010 (Core i5 2,4Ghz / 4Go / 320Go) : when the graphics card switch from the Nvdia to the Intel3000, it turn like this :
So I need to restart. There is no problem when I start with the Intel3000.
Only append when it switch from the Nvidia to the Intel3000.
So I use gfxCardStatus to only use the Nvidia but I'm waiting for a fix from Apple with the next update of Mountain Lion.
Great update ...

Reply to myself but can help other people : after a "clean install" of Moutain Lion, using a USB key, no more problem, even with gfxCardStatus !
And big big improvement of system reactivity.

Broken Ftp Connection and big files problem

I have a problem with big-files downloading.
Does anybody know how to resume downloading using FTP-connection?
Or how can I get bytes from FTP connected file using something like random access to avoid the restart of downloading the file?
"InputStream" does not support "seek"-like methods.

From RFC 959
RESTART (REST)
The argument field represents the server marker at which
file transfer is to be restarted. This command does not
cause file transfer but skips over the file to the specified
data checkpoint. This command shall be immediately followed
by the appropriate FTP service command which shall cause
file transfer to resume.
You should also be aware of RFC 959 Section 3.4.2 on BLOCK MODE transfers which is what allows FTP to REST a connection and "skip" n-bytes of a file.

Big generic problem

I'm having a big problem. Look at this:
public class Person {
public class Employee extends Person {
public class Bank {
private List<Person> people = new ArrayList<Person>();
public List<Person> people() {
return people;
Now the problem:
public class Test {
public static void main(String args[]) {
Bank b = new Bank();
b.people().add(new Employee()); // This was to be forbidden, but
// the compiler doesn't complain
In the class Bank I declared a list to contain only Person objects:
private List<Person> people = new ArrayList<Person>();
and a method to return it, with the same generic type:
public List<Person> people()
so, how could the compiler let me add a person of type Employee in the class
Test? No matter if I change the declaration of the people() method to accept
only objects of class Person and above, like this:
public List<? super Person> people()
it still compiles and I still can add Employee objects to the list that were
supposed to hold just Person objects.
So, the question is:
HOW COULD I RETURN A LIST IN A METHOD WITH A GENERIC TYPE THAT HAS SUBCLASSES AND THAT I CAN MAKE THE LIST TO ACCEPT OBJECTS JUST OF THAT TYPE, NOT OF ITS SUBCLASSES? So, this is type safe. I don't want the list of the example above to accept objects of type Employee, just Person.

so, why can I add Employees to a list declaredthis
way
public List<Person> get() {
return people; // <--- list of Person
}I don't see how it can be said any more clearly -
BECAUSE AN Employee IS A Person!
wouldn't it be to behave the same way as you
said?
Is
the proplem related to a param and a return
type.
With params with works, but not with returntypes?
I don't understand your point!Look if I'm really understanding this thing:
public void add(List<Person> p)
private List<Employee> e = new
ArrayList<Employee>();
obj.add(e) // Error. It's not exactly a PersonNow:
public List<Person> people();
private List<Employee> e = new
ArrayList<Employee>();
obj.people().add(new Employee()); // Ok. But why?An Employee is a Person. But in the first code it
didn't let me add an Employee to a method acception a
Person. That's what I want. But why the second code
worked. Isn't it the same thing. The param type in
both examples is a list of Person.To be more clear in the first code:
public class Obj {
public void people(List<Person> p)
private List<Employee> e = new ArrayList<Employee>();
Obj obj = new Obj();
obj.people(e) // Error. It's not exactly a Person

Big disk problems - or big-disk problems?

Hi there!
I have really big problems. I try to set up a 45 GB Western Digital Caviar 450AA (secondary IDE controller, master-drive). I patched my machine with the recommended patch cluster which also contains patch no. 110202-01 for the ata-drivers. I am able to fdisk the drive with a geometry file using fdisk with options. I am also able to partition the disk with the native solaris 8 x86 format tool. I label the disk - fine so far. But when I try to build a filesystem on it, newfs terminates wih errors. I afterwards tried to set up a scsi-disk with 4,1 GB (IBM DCAS 34330). The same problem occured: newfs (as well as mkfs with options) terminated with the following error message:
mkfs: bad value for size: 0 must be between 1024 and 0
mkfs: size reset to default 0
mkfs: bad value for ntrack: 6 must be between 1 and 0
mkfs: ntrack reset to default 16
seek error on sector -1: invalid argument
That's pretty strange, isn't it? I don't know wheter Solaris x86 is that different from Solaris SPARC edition. Perhaps I'm too dumb to get this machine working and should put my fingers off Solaris x86 edition.
Could anybody in this world help me? Or has anybody the same problems? You know - it's just for my collegues: they are now calling me brad...
Greetings
SERGEJ

Two choices:
- Call Apple (1-800-MY-APPLE) and order, for nominal cost, the original DVDs.
- Or order the SN disk from Apple
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Ant big compile problem

In our company we create business application which is made from 3 projects and they are related to each other.
This 3 projects are:
Model
ModelIRC200
View
Example of problem:
ircbutton.java has this lines
package irc.irc2000.ircSwing.komponente;
import irc.kis.view.dm.sifranti.TipiDelovnihMestTabela;
i am running ant compile under ModelIRC2000 project direktorij, but this
packages are under ../View/src/irc...
now i get error like this
[javac]
C:\Projekti\KIS\ModelIRC2000\src\irc\irc2000\ircSwing\komponente\IrcButton.java:3:
error #300: TipiDelovnihMestTabela not found
how can i include this TipiDelovnihMestTabela in ant build.xml file that i
will not get this error anymore.
If i include classes of View then works but classes of View must be compile
first, but they are also related to ModelIRC2000 so i can not compile it.
Oracle Jdeveloper when compiling jumping from one project to another that
they compile this sucessfully, how ant can do this?
big thx for help
regards

i read all ant manual but i cant make this.
For model 2000 my compile ant build.xml looks like this
<target name="compile" description="Compile Java source files" depends="init">
<javac destdir="${output.dir}" classpathref="classpath"
debug="${javac.debug}" nowarn="${javac.nowarn}" failonerror="false"
deprecation="${javac.deprecation}" encoding="Cp1250" source="1.5"
target="1.5">
<src path="src"/>
<exclude name="irc/kis/view/zap/Obracuni/"/>
<exclude name="irc/kis/view/zap/sifranti/pageDefs/DrzavljanstvaTabelaROPageDef.xml/"/>
<exclude name="irc/kis/view/zap/sifranti/DrzavljanstvaTabelaRO.java/"/>
<exclude name="irc/kis/view/zap/pageDefs/DrzavljanstvaTabelaPageDef.xml/"/>
<exclude name="irc/kis/view/zap/DrzavljanstvaTabela.java/"/>
<exclude name="irc/kis/view/pageDefs/"/>
</javac>
</target>
and build.propertie like this
javac.debug=on
oracle.home=../../../Oracle/jdevstudio1013/
build.compiler=oracle.ojc.ant.taskdefs.OjcAdapter
output.dir=classes
javac.deprecation=on
javac.nowarn=off
how must look ant compile that it will compile files form another related project when necessary and put it into View/classes dir
thx

N97 problems any ideas solutions?

hi there i got my n97 on realease date in the uk and have had no problems with it whatsover, until yesterday that is, i had set my phone to always ask when connecting to web, so when home screen was up the message would come up whether to connect or not, well yesterday this stopped appearing, ive alternated between offline and online, swithced off and on, took out battery and restored the fatory settings, however it still doesnt seem able to connect none of my widgets load up either , also i cant access my browser, when i try the same happens as with the widgets, the screen goes blank then back to the home screen?? im recieving my emails fine so i dont think its a connection problem, anyone any ideas or experienced this themselves?
please help i really love my phone
cheers in advance, andy

are you able to update your phone with the latest firmware ? v11 .... i know that UK has not received it but perhaps it changed ? i am not sure. that could help you also consider formatting your phone. you will have to do a back up and also you might lose some apps that have been preinstalled on the phone including the accu weather one, that can not be replaced cause it is nowhere to be found. if you chose to do that here is what you would do plug in *#7370# from your home screen/dialer and if it asks you for a code plug in 12345. this might solve your issue.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N97 Problem - Photos not appearing

When I take a picture on my N97 and then press "Go to photos" ..there is nothing there at all. When I browse the memory from a PC I can get them, but I can't get the photos to show up the phone at all any more.
Anyone know how to fix this; or has anyone else had the same or a similar problem?

Same problem here
Cannot view any photos taken with phone or any transfered images.
Only way to view images on phone is to use Beta Labs Photo Viewer which I don't like and cannot do anything useful with such as use image for wallpaper etc.
Have upgraded firmware to V11 but made no difference.
Message Edited by tang_man on 26-Jul-2009 09:51 PM

N97 Problem

hey guys
I'm not sure if this is common, but my n97 is running software version 20.2.019. I bought just recently and it was working fine for the first 2 months. Then i started having problems, like the usual resets and lags.
Lately my phone has been resetting more, my music is constantly corrupted, when i do play a podcast or a song it the audio will stop playing but the progress bar says the song is still going. I have also been having issues where when i restart my phone it doesn't recognize mass memory and all my media (photos, music) are gone. Backgrounds back to the original and all my apps on mass memory are gone. I check file manager and I it says memory in use. I also recieve Disk write error, retry or lose data message everytime i'm trying to download something into mass memory.
I don't really know what's going on with my phone, i've done the resets soft and hard and even reformatted my mass memory. I still get all these issues. It sees mass memory after a soft reset but then i turn off the phone and it doesn't detect it again. Is this normal with s60 v5? Or does my phone need to go back to nokia care?

I have the same problem in the sence that my N 97 does all sorts of odd things, rarely the same problem all the time. Very unpredictable. I only use my phone to call and receive calls, SMS's and 3 or 4 very small .XLS files. I did not move my e-mail to it and also I am not using blutooth, because I do not want to depend on it, just don't trust the thing. Today I sort out the problem by going back to my 9500 and sending the N97 to Nokia. Very disapointed with what happened to me and the worse is that it does not look like that my phone is the odd bad one out there, out of the hundreds of thousands that Nokia made; it looks like to me that it is the norm. With so many complains in this forum and others, I requested already my ISP to consider replacing the N 97 for something else, not a Nokia for sure.
Tony

Big n97 problem

Similar Messages

Maybe you are looking for