Big problem and very stupid mistake, please help me

I was about to put leopard on my iBook g4 when on the read before installing thing it said if you want to start fresh delete your hard disk. I did that and the cd didn't work so now I'm stuck with nothing on my computer. Oh and by the way I don't understand why it didn't work, when I put the cd in and I restarted my computer it just made weird noises for a few hours and nothing happened. Thanks for helping!

See if you can use the install disks that shipped with your iBook. If so, then again erase and try installing 10.5.
As far as retrieving your data (if you have no backup) before you do another operation on that drive your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another operation on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
-mj

Similar Messages

  • I have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me

         i have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me apple.corp and please tell me if this is not possible to be done it almost a month that i cant use my iphone.
         thank you for those who read this
    <Email Edited by Host>

    Remove your email address.  This is a public website, and you are addressing thousands of strangers.
    After doing that, tell us what your issue actually is.  This is a user-to-user technical forum.  You are not addressing Apple here.

  • I connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.

    i connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.
    helllllllllllllllllpppppppeeeeeeeee me

    There is no such thing as an iPhone 4G.

  • HT1711 I just bought a stupid nicki minaj album that I didn't wan't to buy and It cost me 15 dollars . Now all my money is GONE and I was hoping is there was ANYWAY I could get my money back, please! It was a stupid mistake, please help

    Well the title says it all, I just bought a stupid nicki minaj album that I didn't wan't to buy and It cost me 15 dollars >.< Now all my money is GONE and I was hoping is there was ANYWAY I could get my money back, please! It was a stupid mistake, please help

    Well, if you havn't been abusing a previous stupid mistake, try here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Big problem with my 4th Gen, please help !!!

    Hi guys.
    Well I've a big problem with a 4th gen Ipod. The prob is that the Select button on the middle doesn't work.
    I've tried everything : Did a reset, a complet restore from Itunes 7, but it was unsuccesful.
    I don't really understand the problem, I was using the Ipod normally then suddenly the button didn't work !!
    Please help me. In addition, I cannot carry it to the Apple Centre because I live in Algeria.
    Thanks.

    No ideas ???
    I've tried to open it as well, I've unplugged all the connectors, cleaned it with alcohol, but the button still not responding.
    Do you think that the problem would come from the logic board ?? Because the button itself worked (I used a METRIX to test it), and I can make a reset with no problem (the reset needs the central button).
    Please help me. Thanks.

  • Itunes has encountered a problem and has to close ---- Please help me

    I had to restore my computer this week. itunes was working fine before I restored. I have a video ipod. I installed from the disc but it encountered a problem half way through. I removed this using the control panel. I then downloaded itunes from apple.com. It installed it but it won't open, it comes up with itunes has encountered a problem and has to close.
    I have used all the info on apple.com on how to deal with this, but to no avail.
    Please can somebody help me

    I am having the same problem and error messages. I had a previous version of Itunes, but updated to the new version today after purchasing an ipod shuffle 2nd gen. I am told that itunes and quicktime installed successfully, but when i go to open itunes, i get the "Itunes has encountered a problem an needs to close. We are sorry for the inconvenience." When i try to open Quicktime, it tells me "quicktime failed to initialize. error # 2905" when i go to the apple.com website and click on the Quicktime tab i get a "plugin error. The plugin did not initialize properly" Help.

  • My hp pavilion dv1000 (1615ts) has an overheatin​g problem and shuts down suddenly. please help..

    my hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly.  please help..

    with that age of laptop we immediately suspect an issue with dust clogging the exhaust fan or the thermal compound between the heatsink and fan breaking down and needing to be replaced. The laptop needs to be opened and inspected in other words. 

  • Big problem installing Adobe Flash Player, please help?

    Please help. I tried to download Adobe Flash Player 5 times without success. Every time it states Installation succeeded, but I can't find it anywhere.
    I have to keep closing and opening Browsers without any reaction of the so called installed Flash Player. What a mess!

    Flash is installed as a browser plugin. You won't see it as an app in OS X. If you go here it will tell you if flash is installed and working. http://www.adobe.com/software/flash/about/

  • Big Problems w/ Tiger...please help!!

    I've been running Tiger on my G5 for about a week now, and something has just gone wrong. None of my applications will open...I get the "application quit unexpectedly" for just about all of them. Safari opens, but the pages are scrambled. I tried to re-install Tiger, but the computer seems to have forgotten my account name and password---becuase when I enter them, it says they are incorrect. Also, the computer will not restart or shut down correctly. I wait and eventually have to turn the power off. I'm out of solutions. Any ideas???

    Hi, c.
    1. You wrote: "I tried to re-install Tiger, but the computer seems to have forgotten my account name and password---becuase when I enter them, it says they are incorrect."How did you go about trying to "reinstall Tiger"? Please provide details.
    2. What changes, if any, did you make to your Mac before this problem arose?
    3. Try the following in the order specified:3.1. As a general checkup, I suggest you run the procedure outlined in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. This may help get you back to functioning.
    3.2. For the "applications quit / safari scrambled" issue, see my "Multiple applications quit unexpectedly or fail to launch" FAQ.Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Big problems after hard drive failure - Please help.

    About 2 weeks ago, my Macbook seized, and was sent to Apple to repair.
    It was found that the hard drive failed, and 2 weeks later I received my macbook back with a new hard drive.
    Luckily I had backed up my home drive and was able to restore it using backup.
    Now this is where my problems start.
    My home drive is not the same name ( I think - I can'r remember too well what it was called previously )
    I have my entire music library backed up to an external hard drive, and mounting this hard drive is a REAL pain in the *** now.
    Sometime it loads up, sometime it just doesn;t get recognised, and I can put the USB connection in and out 10 times before it mounts.
    I have verified the disk, and nothing is wrong.
    Does anyone know what this problen could be ?
    I have left the external hard drive in during the night, and after the macbook goes to sleep, I will go back to it in the morning, and the hard drive has been unmounted, and I repeat the exercise over again of trying to mount the drive.
    Its so annoying, and I just dont know wht to do.
    If anyone can help, I;d really appreciate it.
    Griff

    SMART status is a pretty reliable indicator of what is going on. You should back up your irreplaceable files as soon as possible.

  • 10.6.3 - Problems and Attempts at Resolution - Please Help

    It was recommended to me by a regular contributor (RC-R) to put together in one place all the problems I've had and all the solutions I've tried. So here goes.
    Problems:
    (1) Major issue is that my 20" Alu iMac is randomly sent into a sleep mode from which it cannot be awoken - it happens instantly and without warning.
    (2) The issue started immediately after installing 10.6.3 and nothing like it occurred beforehand.
    (3) The issue seems acerbated by using Safari and often occurs within a few minutes of using Apple's web browser.
    (4) Long stretches of avoiding the problem seem possible if using Firefox or Chrome instead.
    (5) Using switching and start-up take longer and sometimes freeze altogether - everything is slower.
    Attempts at restoring normality:
    (1) First of all I disable and then finally uninstalled Rapport banking security software - since this was one of the last programs to be installed and I'd seen reports of problems elsewhere - thought this might be why Safari brought the system down. Didn't resolve the problem
    (2) I'd been having problems with Adobe's installer unable to upgrade Acrobat, and in order to resolve this I reinstalled entirely and got everything cleaned up so there was then no upgrade problems. This didn't resolve the problem either
    (3) I did a reinstall of Snow Leopard and installed all updates again. Still no resolution
    (4) I've also repaired permissions on the disk. But again, you guessed it - still crashes
    Note: I have a MacBook (Alu) with 10.6.3 installed - no problems whatsoever and the programs installed are virtually identical with the exception of VMWare Fusion.
    My Apple Care is close to an end for the machine, so my next step seems to be get the iMac ready to return to Apple before it is too late. Because it looks like a software issue but is acting like a hardware one. The reason I'm assuming it is not a coincidence is because others have had similar problems

    Tried to reinstall 10.6 from DVD, but installation failed - twice.
    Failed how?
    What now? Disk Utility? Format Hard-drive? What is the best way of going about these things?
    It's hard to give any specific recommendations without more information. You could simply have a third-party app that's acting up, or maybe your past reinstalls weren't done correctly. So it's possible that there are less drastic solutions than what I'm about to tell you to do. But, as you say, you just need it working, and sometimes a good "nuke & pave" is quicker than fiddling around.
    Make sure you've got a good backup (see my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups>). Then, boot from the install disk and switch to Disk Utility. Erase the hard drive. When done, just for the heck of it, repair the drive. If there are problems, post back here.
    Now quit Disk Utility and reinstall the system. Once you're done and booted into the new system, run Software Update and install all updates. After that's done and you've rebooted, do it again, continuing until Software Update says you're up-to-date. Now install any third-party apps from scratch, avoiding any initially that you don't absolutely need. (Install those later, once you know your system is stable, and has been for a while.)
    Finally, import your data into the new account. I recommend the manual route, though you could also use Migration Assistant to import from a Time Machine backup or clone. If you use Migration assistant, you have to be cautious not to import a bunch of potentially damaged system settings files. (You'll want to reconfigure your network settings from scratch, for example, rather than importing those settings from the backup.) If you want to go the manual route but aren't sure where to find everything, let us know.

  • Stupid mistake, please help

    i recently deleted quicktime to revert back to an older version and in doing so, i seem to have messed up my built in isight. it still works with imovie and photobooth but every time i try to open up video chat in ichat and skype, it says in ichat "camera is in use by another application" and in skype "no camera detected"
    anyone know how i can fix this problem?

    See if you can use the install disks that shipped with your iBook. If so, then again erase and try installing 10.5.
    As far as retrieving your data (if you have no backup) before you do another operation on that drive your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another operation on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
    -mj

  • Big Problem with brand new iPod please help ME!!

    Hi, I just today got a brand new iPod. I pluged it into my computer and put on about 700 songs immediatly. Then, I tried to put video on my iPod. It said it would not do this because it's not the right type of iPod. But it is a 5th Gen. iPod and it can play video. Anyway, I installed the latest iPod updater. Now, it says to install the new iTunes 6.01. So I tried but it says my disk is full. It is not full. Also, do I have to keep my previous "iPod for windows" files that are occupying space on my disk?

    Kenny,
    If you can back your songs up, and you have not rated a slew of them already, it might be a good idea to uninstall iTunes, then reinstall it and use the ipod updater to wipe the iPod. Just make sure you download and install 6.01 before you plug the iPod in. Maybe that will get you past the disk full problem. Just something to try.

  • Line in recorde mostly noise and very low audio (please help)

    i think i may be giving my client a lot of money back...
    about 20 minutes into a video gig i realized that the line in audio i was getting on my camera was not working properly so i pulled the plug and jsut picked up from the camra mic, but i am left with about... 18 minutes of very very poor audio. are there any brave and generouse soundtrack pros who can tell me waht setting to apply to make this "listenable"
    you can download a 30 second snipit here: http://www.video-guy.com/forums/ami_out_ofluck.zip
    i have soundtrack, but rarely use it, so like i said. if anyone would be kind enough to hold my hand and tell me what buttons to push i would be very much in your debt.
    heck, i'll even do some free photoshop, or final cut work for you.
    thanks.

    First off, yes you're pretty much out of luck. I listened to your sample, and there's probably nothing you could do to make this sound good. With enough filtering, you could make it so the voice is marginally intelligible, but it's never going to sound like a good recording.
    Second, while this web forum is good for discussion about Soundtrack Pro's features and how to use them, I've found that Usenet has much more meaningful discussions on audio editing techniques in general. A couple newsgroups I read religiously are rec.arts.movies.production.sound and rec.audio.pro.

  • HT1267 I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines :(

    I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines

    What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
    If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
    How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

Maybe you are looking for

  • Exclusive Free Goods

    Dear Experts, In transaction VBN1, is there anyway where I can set "Exclusive" and Calculation type "2" as default. This is to prevent the users from accidentally maintaining "Inclusive" free goods. Thanks in advance!

  • How do i transfer all data from 4s to 6 ?

    how do i transfer all data from 4s to 6 ?

  • Error while determining logical Port

    Hi This is a ECC to SRM scenario: I get this error in the Call Adapter step. I am using WS Adapter at the receiving side. "Error while determining logical port Cannot find logical port for agreement abc and interface xyz" Why do I get that error and

  • Restore steps if lost some data files?

    I lost some data files in database and I am not sure what datafiles are. But one think sure is the control and redo log files are here. For this case, I don't have to restore contronl files and archivelog files. Please correct me if my idea is wrong.

  • OnRollOver - mouse too fast??

    I have a simple movie clip that says PRODUCTS and the "onRollOver" just makes the letters turn yellow. "onRollOut" makes them white again. But if I move the cursor over it too quickly, it fails to trigger the "onRollOut". It just turns yellow and sta