Big Problem !N73 error after update

Hi guys, im having a problem on my N73 and maybe you guys can help me.
I did the software update on my n73, before i did the security copie all good all ok, now i put the security copy back to my n73 and after i put the PIN number it appears a message saying " Error starting up the phone". and i cant pass that part, but the weird part is that i still can take call and the menu and everything appears when someone is calling me ! o.0.
But i cant make call or access the menu, is all white with the error message.
Can someone help me? thanks

refer to this thread...this might help you get your answer if not a solution
/discussions/board/message?board.id=topfaq&thread.id=112
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

Big problem with photos after update to iOS 4.3

Hi everyone,
I have a big problem with the photos on my iPhone 4 after updating to 4.3
There is not enough space for them, anymore. Before the update I had about 9000 photos synced with iTunes -and I had about 10 GB free. Now, iTunes can't sync the photos anymore because there is not enough space on the iPhone??? The same amount of photos does not fit anymore. I suppose there is an error in the Itunes photo compression module. Anybody else with the problem? Any suggestions for a workaround?
Thanks, Olaf
Update: The same number of photos is taking up three times as much space than before.
Message was edited by: olafoio

Me too, but I have the solution.
There seems to be 2 problems. First, for some reason your data is taking up more space post update, so if you were close to filling your device, you now overrun. This isn't well handeld by iTunes, but doesn't seem to be the biggest problem as I'm sure that would sort itself out if you could just get it to sync.
The root problem is the 2nd one - the missing file. Mine was a photo, but it took me ages to find it and you're not going to like how I did it. I started to untick things to sync one by one (music first) and attempting the re-sync. I found that it was a file in my photos that was causing the problem, so I removed those and then re-loaded everything back up and I'm now OK again. I use Aperture to sync with.
I had the same problem with the last OS update and it's a pain because it takes ages to sort with a nearly full 32G device.
Now onto my iPad for an update, but that's proving to be a non-starter as the thing wont back up due to "another session in progress". More rooting around to solve that I guess......

BIG problem with Mail after updating Mac OS X Leopard to 10.5.7

Hi everyone,
after updating OS X Leopard to 10.5.7, I noticed that all of my Mail accounts had disappeared. If I try to set them up again, Mail doesn't seem to be able to store them and after quitting and re-launching, they're gone. This had never happened under 10.5.6 or previous OS.
Strangely enough, only the MobileMe account seems to be stored.
I tried repairing the permissions, checking the hard disk, re-installing Mail from the Leopard DVD, deleting the com.apple.mail.plist file. Nothing seems to work so far.
Any suggestions? I haven't been able to use Mail for almost a month now. I used to have 6/7 accounts and I can't stand having to check their web-based version. I want Mail to work as it always has!

Rest assured it doesn't happen to all Macs with 10.5.7. I'd start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=1223&start=0
You'll get a wider audience, and won't confuse the original poster with solutions that don't apply to them.

Problems on ipad2 after updating to latest os8 version, getting sync to itunes error

problems on ipad2 after updating to latest os8 version, getting sync to itunes error..help pls

What happens when you save the attachment to disk and open it with Word?

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

Does any experience this problem after updating to ZCM11sp1?
I keep getting IE8 unsupported error after updating to ZCM 11 Support
Pack 1 (11.1) although I am running on IE8 already. Now remote
management is not working because of this incompatible browser errors. I
tried this following
link:http://www.novell.com/support/viewCo...9158&sliceId=1
But it does not help.
Any suggestion or idea would be greatly appreciated!!!

On 8/29/2011 8:26 AM, craig wilson wrote:
> Double Check all of your settings there, including the option to view
> Intranet sites in compatibility mode.
>
> For some reason, your IE8 is reporting itself as IE7 and running in IE7
> mode which is no longer supported.
>
> On 8/29/2011 9:17 AM, April wrote:
>> Does any experience this problem after updating to ZCM11sp1?
>>
>> I keep getting IE8 unsupported error after updating to ZCM 11 Support
>> Pack 1 (11.1) although I am running on IE8 already. Now remote
>> management is not working because of this incompatible browser errors. I
>> tried this following
>> link:http://www.novell.com/support/viewCo...9158&sliceId=1
>>
>>
>>
>> But it does not help.
>>
>> Any suggestion or idea would be greatly appreciated!!!
>
>
Thank you for your responding. I have already checked to view Internet
sites in compatibility mode with no luck. I tried several different
computers with IE8 but they all got the same problem.

.wav error after update

This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
Anyone know why this error is occurring and how I can get it to play the .wav files again?
Thanks,

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

Error after update Oracle SQL Developer Migration Tools

Hi,
I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
This error appear when it´s restarting:
Exception Stack Trace:
java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
 at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
 at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
 at java.net.URL.getURLStreamHandler(URL.java:1106)
 at java.net.URL.<init>(URL.java:393)
 at java.net.URL.<init>(URL.java:283)
 at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
 at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
 at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
 at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
 at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
 at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
 at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
 at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
 at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
 at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
 at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
 at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
 at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
 at oracle.ide.layout.Layouts.activate(Layouts.java:784)
 at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
 at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
 at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Anyone knows why that is happining?
Thanks in advance,
Felipe.
Message was edited by:
felipe.b

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

HT5935 Does any one have problem in FaceTime after updating to iOS 7

Does any one have problem in FaceTime after updating to iOS 7

No, none whatsoever. If you would describe your issue, someone may be able to assist.

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

Error after updating kernel 640U patch to 247

Hi Forum,
There are some repetitive errors after updating kernel 640U patch to 247:
======================================================
X Sun Feb 22 07:01:01 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:08 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:19 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
======================================================
Please help.
Regards,
Agoes
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AM

Hello Agoes,
You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
Please refer to not 1239685 for more info
So no issues
cheers
Rohit

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

Big Problem !N73 error after update

Similar Messages

Maybe you are looking for