Big problem, windows hanging by SB Live! Plati
I have buyed some new hardware for my computer.
A new mainboard Asus a8n-sli deluxe
New grapicscard Matrox Parphelia DL 256 (pci)
My computer didn't startup anymore after installing this new hardware so I install windows xp again.
Everyting works fine but when I install my SB Li've! platinum (ct 4760) card, windows goes hanging.
First i think its a IRQ problem but it isn't.
I disable my onboard sound before installing the li've card.
When Windows is started up, I see the speaker (rigth in my taskbar) going mute, on and that again and again and then windows is hanging.
Please I need helpe,
Thanks a lot
Hi
Does Li've! card appear on device manager?
In which PCI slot have you installed Li've!
It may be so that Li've! drivers are not working with shared IRQs card?
Put the card on PCI slot 3 (see manual: board layout).
Do you have original Li've! installation CD with XP drivers?
If not then you can search this forum for links to them.
This so far ...
.jtp
Similar Messages
-
BIG Problem with Drivers! (SB-Live 5
I can remove, repair, install, oder modify the drivers!!!!!!
Here is a link to the screnshot:
http://home.arcor.de/latroe2/Unbenannt.jpg
OMG! I need HELP fast!!!
thx ;>I'd try "creative reset standarts" and then reinstall the drivers. If it doesn't work, reinstall windows...
-
Before my iPhone was good. When I was using iOS6 some like this only. After that I got a message of update your iOS through Apple. I updated and than for 1 week it was ok after that my mobile start hanging. But now my wifi also start hanging most of times it doesn't work. It not ready to start. Not searching a available networks. Please help me. I want to restore a iOS7. Through update.
Try going to setting to General to reset to network settings.
Once you have reset network settings you will then need to have your device find the wifi connection once found you will then need to provide for the wifi password
good luck. -
I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i doWelcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/ -
Windows 10 preview build 10049 BIG PROBLEM
hello,
i got a very big problem after updating to build 10049. after the installation was complete my laptop restarted and i got a black screen with in the botom right corner the build number 10049. after a couple of hours the laptop restarts itself but it keeps
getting on this black screen.
i tried a iso of windows 10 preview latest iso build on a usb stick but with every solution i try: format, repair it keeps getting the same error that there is a problem with unmountable bootdevice.
even using my official windows 8 dvd gets the same problem
i'm lost. i dont know how to solve this problem.
can someone please help me with this?This is not a one off, it is repeatable on brand new disks.
I previously had the original win10 preview build installed on this hard drive = no problems.
I then did a fresh install of build 9879 from CD. Install completed untill it got to the reboot phase = it would not reboot - the hard drive was not recognized in the bios anymore.
tested broken hard drive in another computer = works
tested broken hard drive in 2nd connector on my laptop = fail (still not seen by bios).
tested a few other sata disks I have laying around on both connectors of my laptop = pass.
upgrade my bios as there is one version higher than I had. = fail (still not seen by bios).
boot from broken hard drive on another computer and finish the OOB portion of the win 10 preview install = pass
So it seems clear that the hard drive is still working, but just not recognized on the original computer. It is only 2 months old so I get it replaced under warranty. Replacement disk is recognized by bios, yeah! I then restore image of broken hard drive
to this replacement. Disk is still recognized by bios. I boot up from this disk on my laptop. It works OK until first reboot, then is not recognized by bios anymore.
Computer = Toshiba Satelite P305 PSPC8U-01400Q
Hard disk = WD blue 1TB model: WD10JPVX-22JC3T0
Note: also with windows 8 running on this computer and the broken hard drive installed in second connector, windows also does not see it, neither through disk manager nor through diskpart command line. But if I boot up in Linux from a bootable USB flash
drive, then I can see the (broken disk) on this same computer. Yes I can see it and I can read and write to the filesystem, even though it is still not seen by the bios.
HI
Disable PUIS (Power-Up In Standby) with HDAT2.EXE With PenDrive BOOT MS-DOS -
Firefox 5.0.1 on OsX Lion: big problems on popup (window.open)
I just updated OSX to the recent Lion. Firefox 5.0.1 have a big problem with EVERY POPUP invoked by
onclick="window.open(this.href,'win2','width=400,height=350,menubar=yes,resizable=yes'); return false;" in the a tag, with href correctly specified.
Ignores the widths and the heights (goes almost full screen, without bars) and the problem is that it doesn't load any page.... it remains blank!
It occurs on every joomla site having print and email icon on articles, or any other site that uses this kind of opening a popup.
UPDATE: discovered the problem. Firebug, latest beta build.Not only on youtube, but everywhere: other video sites, browser games, etc.
-
BIG PROBLEM - BB Link crash when i installing in windows 8.1
Hi, sorry for my bad english. I try to speak with you.
I have a very big problem.
When i try to install the latest version of BlackBerry Link (120_b028, this is the file name), the system crash (blue screen) and write this error: "DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys)" - i try to disable the ethernet card and the wireless card but the problem still - I don't such enithing now - I'm desperate now because i don't make backup - Please help me and sorry for my bad english too. Thanks for all - i still you........OK guys,
After consistently received the BSOD when Installing BB Link, I turned off bitlocker and received this error from Kaspersky. Link did not load but at least I didn't get the BSOD.
Error 1704. An installation for BlackBerry Link is currently paused. Changes make by this installation will be cancelled. Start the installation process again after the process shutdown.
I then removed Kaspersky, restarted the install and received this error.
Error 1935. An error occurred during the installation of assembly component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B5
After I acknowledged the error the Install Shield rolled back the install and bailed out.
Anybody have any other ideas on how to install BlackBerry Link on my brand new Sony Core i7 laptop running Win 8.1?
BTW, if anybody from BlackBerry is listening, my Z10 has been a great device and Link worked well on my Win7 laptop. This however is enough for even the most devoted BB user to toss the whole thing. There are a lot of people having similar problems. Get this fixed ASAP.
Thanks.
B -
Hi all,I've got a very big problem with sound. I have no sound on my computer, not at all. I have been reinstalling the drivers about 20 times, but it doesn't help. The speakers are plugged in, everything seems to be right, but I have no sound. It worked all perfectly till 2 days ago. I haven't installed SP2 or anything,?it was already here when it worked. But?at once there came an error and there was no sound anymore. I had no sound, so I deleted the drivers and installed them again. Since then, nothing works anymore. Reinstalls, repairs, nothing works. Also when I start the mixer, there is a ctdevcon.dll error. When I start the audioHQ : ''cannot initialise audio driver, please reinstall''. Diagnostics results : everything passes, except Mixer Driver, Soundfont Setting, and Mixer Settings Check. Please, I'm really frustrated, help me!?Sorry for my bad English,,,?
ps.
when I click on ''Begin Fix'' at Diagnostics?it says that some files are missing or having problems, please reainstall. But when I reinstall, it happens again.Message Edited by element93 on 05-7-200702:55 AMTry these uninstall/reinstall steps from this Knowledgebase article SID72. Hope it helps you.
Jason -
Recently I had installed a new harddisk to my computer.But I faced a big problem is my computer will automatically hang once the window came out.It looked like some loading can't operate well.Can anyone please give me some advise.Thanks
1.intel celeron 433MHz
2.msi 6163 pro
3.Maxtor DiamondMax Plus D740X
4.196 SD Ram
5.Creative 3DB TNT2 32MB
6.Creative SB Live Value-digital
7.Star ( switching power supply)amps and watt details of label,make model of psu
just posted this in another thread
from pc answers xmas 2002 issue typical pc with gf4
p4,athlon 65-75watts 75
motherboard 20-30watts 30
graphics card 15-100watts 100
7200drive 30 watts x2 60
ram per 128mb 10watts x4 40
cdrom 25watts 25
dvdrom/writter 30watts 30
sound card 5-10watts 10
floppy/pcicard 5watts 10
zip drive 10watts -
networkcard 5watts 5
TOTAL 385watts
so add a bit for upgrades and get that 430 antec
but yours will be less -
Big problem with Airport Extreme and Vivax Provider in Brazil
Hello guys.
I live in Brazil and I bought my Airport Extreme in a recent trip to USA.
For some years I was a client of Telefonica and had an ADSL link, I had a D'Link G604T to do both the modem and router operation in the same box. I was happy with my connection of 1Mbps.
In a recent promotion of Vivax I switched to a cable connection to have both TV and Internet at the same operator, my link now has 3Mbps.
With this pack I also received free one RCA cable modem model DCM425B, it was installed fine in one computer only. Everything was fine my connection was faster the old one.
So I went to install the Airport Extreme to make things even better.
After I installed I went to see the web status of my modem, all parts were looking fine, but the modem could not see the computer. Bad sign.
I talked to Vivax support people and apparently it was a problem with their network setup and they manage to make it right. My model now sees my computer.
After that problem was solved I could not make AE to work with the modem, it had the green light and the setup looked fine, but I could not open any site. I tried to turn off my modem and AE, waited some minutes and turned on first my modem and after it was up I turned on AE. All lights looked fine but again no connection to any site.
I called again the Vivax support center and they tried to help me but the don't know AE and they could not help me with all the details but said there was 2 10.x.x.x coming from my side. So I tried to use in bridge mode. I also selected the 192.x.x.x range instead of 10.x.x.x as default.
After many setups and turn off and on again my connection is working but I have a big problem with wireless. If I turn it on I loose my connection, it seems that AE sends 2 equal ethernet address to Vivax and their network don't like it cutting me off.
So my connection setup is like this:
RCA Cable modem model DCM425B at 3Mbps using a 200.x.x.x ip
Airport Extreme connected to a Mac and a Windows PC by wire using the 192.x.x.x range ip
Wireless is off
Bridge mode is on
This the only way I could make it work.After a firmware update it worked fine.
-
i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Big Problems with Vista and Audigy
Hello.
My name is Jana and I'm from Germany. This board is my last hope now.
I have big problems to use my audigy 2zs in Vista Business (32 bit).
I use the latest driver from 9.3.07.
The installation process works fine and I get no errors. But I can't start the AudioConSole . I always get an error, that no audio device was found (error message is german)?!? The device manager shows no problems and the audigy 2zs is correctly listed.
I need this AudioConSole to activate the 5. speaker settings. In the sound preferences in Vista is that not possible.
My speakers also need the creative software from cd to activate the bass, but I when I install this software and then restart, only a few programs are installed (but they don't work). I need especially the speaker settings but there is unfortunately no way to install this software.
I did this procedure at least 5, 6 or 7 times, but it always don't works.
So please can you help me?
Sry for my bad english.Hmm... Try to redownload the drivers from the website, because Creative has updated them to include a proper signature. It is possible that the drivers do not load if they are not signed, which would explain why the AudioConsole does not launch. Also, Windows Vista does the Bass redirection by itself:? If you select 5. speakers from the standard Control Panel, you will be asked whether you have satellites or full-range speakers. Selecting satellites means that the lower frequencies need to be played by the Subwoofer instead. If that still doesn't work, you can do the following:? Extract the downloaded drivers using WinRAR (or similar) (right-click and then extract). Then go to the Subfolder "Drivers\wdm\common\i386"? and run "CtPanel.exe". From there going to the speakers tab there is a "BASS-M" option...
-
BIG PROBLEM: Multiple (loop) NOTIFY COMMITS for same VO instance
Dear forum,
I have a big problem with 1 of my VO.
When I insert a record using AddProjectView this works fine. The record is persisted successfully.
When I insert another record using AnotherView (e.g. different table) a commit is also done on AddProjectView.
In de log I can see: AddProjectView notify COMMIT ...
I wouldn't have found any problem if I didn't had a afterCommit on AddProjectView which inserts some records in a table. The inserts fail because UK violations.
Now the problem is, why is AddProjectView being committed again?
If I keep updating records in AnotherView, everytime the AddProjectView is commited. If I stop the running OC4J instance and restart it, the AddProjectView is not committed anymore! It seems the VO instance is keeps 'hanging' around....
As I don't have any idea, any help is appreciated.Hi,
When exactly you are creating and inserting record in destVO?
mere destVO.first() won't work, first() works if records are already fetched using query.
If I understand correctly, you should be creating new record in destVO (albait the only record) as follows:
Row row = destVO.createRow();
//defaulting logic should go here
row.setAttribute("Attr1", value);
destVO.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Thanks,
Hrishikesh -
Big problem CyberLink Yuocam HP dv6870 el
Hi dear HP community,
I have a big problem.
My OS was Vista Business 32 bit and I've upgraded it to Windows 7 Pro 64 bit.
All works great except the web cam:
My pc HP dv6870 el doesn't recognize the web cam.
I've tried with SIW, but not info about it.
I also have installed this software:
http://h10010.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113943-1&cc=it&dlc=it&docna...
When I started the CyberLink Youcam program...there was a message: please turn on your integrated web cam!
I'm desperate, I need my web cam, please help me.
Thanks in advance to all of you.
Ps: sorry for my bad English but I'm Italian.Hello disantogiacomo,
Please take a look at this document, which provides troubleshooting steps for troubleshooting the webcam after changing the operating system. Please let me know if it helps you resolve your webcam issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Maybe you are looking for
-
When I plug in my ipod shuffle { early model } the play list that appears does not show what is actually on my ipod. Some I had deleted before and some songs that I have never had on my ipod. appear on the list I do not knw via the computer what is
-
I have lost all of my FAVORITES (tabs, not bookmarks) after an update! How do I get them back now?
After an update of Firefox, I lost all my tabs (not bookmarks). I searched all the help info and found nothing that said how to replace tabs only bookmarks. Please help, this is most frustrating!
-
Adobe Reader 10.1.2 - nur noch über Standarddrucker drucken?
Moin, vor ein paar Tagen wurde das Update auf Adobe Reader 10.1.2 eingespielt. Danach hat sich das Druckerauswahlfenster verändert. Heute bemerkte ich, dass man nur noch über den Standard-Drucker drucken kann. D.h. auch wenn ich einen anderen Drucker
-
Weblogic jDriver for Oracle 9.0.1.4
Hi, We are using the Weblogic jDriver for Oracle oci901_8 to access the Oracle 9.0.1. We are planning to upgrade the oracle to 9.0.1.4. Will there be any issues with the Weblogic jDriver that is being currently used by us(oci901_8 ). Is there Weblogi
-
Burned dvd has sound when played on computer, silent in dvd player
I have a file from final cut express. The dvd's burned just fine using idvd 06. When I try to burn a dvd with idvd 08, the sound is present when I play the dvd on the computer's dvd player, and on the portable dvd player, the dvd is silent in the jvc