Big problem with Aperture. Doesnt react to any command, cant even close it ?

Cant close Aperture, it doesnt react to any command, just grinds on a photo. I tried to import photos from facebook and it stuck. just says OSSerror and keeps trying to load a pic..for one day now. can anyone help ?

On this page, this recommendation is made:
Unchecking the box to automatically check for newly published albums made this problem stop happening.
I suspect you'll have to force quit Aperture.  Restart it, and then run "Repair Database".  Details are on this Apple Support page.
I don't use Flickr; that's all I got.  Hope it helps.

Similar Messages

  • I updated my iTunes to 10.5. I see my library but it doesnt react to any commands now

    Hey there,
    I updated my iTunes to 10.5 which was a big mistake.
    iTunes opens normally but it does not react to any commands. I cannot click on any song or field in the menue.
    I use a Lenovo 64 bit machine with Windows 7. I also use iCloud.
    I tried to repare iTunes several times but it does not help. I also wonder why there is a *32  next to iTunes in my Task Manager although I installed the 64 bit version.
    Thank you so much for your help,
    Chris

    But the iTunes was working fine until some days ago! and then just crash... yesterday it was working well... today it's not working again...
    iPhone, iPod for synchronize... and nothing work...

  • I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

    My question...
    any answers pl.
    I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

    If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
    =
    RANKX(
    ALL(Table1),
    CALCULATE(
    COUNTROWS(table1),
    ALLEXCEPT(Table1, Table1[ContactReason])
    DENSE
    If this has missed the mark, would it be possible to clarify the requirement further?
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • Got big problem with my iphone , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    How do you know its charging very very slowly? Is the screen back on?
    Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
    Just leave the phone in and do what is said above.
    How long do you think it will take to charge to 100%?

  • Big problems with slideshows

    Hi, I've a big problem with iPhoto (and Aperture too, but I'll say later).
    Two days ago I was creating a small slideshow (18 pictures) and everything was fine. Suddenly, while I was looking for a theme, switching between 3 of them, iPhoto stopped to work. No ESC, no key, I had to restart my iMac, turning it off.
    From this moment every slideshow I select, iPhoto stop to work and need a force quit. So I restored a library, from Time machine, but nothing changed.
    So I bought Aperture, but nothing changed, using iPhoto Library.
    Now I've created an Aperture Library, importing in it my old iPhoto Library. Is there any way to "clean" iPhoto, reinstalling it from new? Do I need such a action?
    Thank you and best regards.

    That means that there is something in your account that's the culprit.  First try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that fails it might be another preference file that's causing the problem.  Here's how to test for that:
    Trouble Shooting Preferences
    NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    1 - close all applications.
    2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop. 
    3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock.  You will be asked to provide your Admin password.
    4 - reboot.
    5 - run the application again and determine if the problems is fixed
    6 - If the problem is fixed:
    A - open the working Home/Library/Preferences folder.
    B - Open the Preferences  folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
    C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
    D - reboot.
    7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
    8 - reboot.
    OT

  • Very big problem on aperture

    hi all
    i have a big problem with my aperture 3,for the second time in 2 month my aperture won't open i have to reinstall the software to reuse it.
    and i can't switch library inside the program.
    i have twice this crash error.
    hi and tnx
    Process: Aperture [138]
    Path: /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier: com.apple.Aperture
    Version: ??? (???)
    Build Info: Aperture-1004230130~1
    Code Type: X86-64 (Native)
    Parent Process: launchd [93]
    Date/Time: 2010-09-13 18:31:59.742 +0200
    OS Version: Mac OS X 10.6.4 (10F569)
    Report Version: 6
    Interval Since Last Report: 61525 sec
    Crashes Since Last Report: 6
    Per-App Crashes Since Last Report: 6
    Anonymous UUID: EDCDBFAF-4082-4A8B-8FFE-30A6BB828540
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
    Reason: no suitable image found. Did find:
    /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.57f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.16.1)
    Bluetooth: Version 2.3.7f1, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: ST9500420ASG, 465,76 GB
    Serial ATA Device: HL-DT-ST DVDRW GS23N, 7,8 GB
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000

    You need to re-install Aperture because it' missing bits of itself:
    library not loaded: ...
    ... Reason: no suitable image found.
    To re-install Aperture
    1. Put the Aperture.app in the trash (Drag it from your Applications Folder to the trash)
    2. Go to HD/Library/Receipts and remove any pkg file there with Aperture in the name
    3. Re-install.
    Of course you will back up your Library and photos first.
    Regards
    TD

  • Big problem with photos after update to iOS 4.3

    Hi everyone,
    I have a big problem with the photos on my iPhone 4 after updating to 4.3
    There is not enough space for them, anymore. Before the update I had about 9000 photos synced with iTunes -and I had about 10 GB free. Now, iTunes can't sync the photos anymore because there is not enough space on the iPhone??? The same amount of photos does not fit anymore. I suppose there is an error in the Itunes photo compression module. Anybody else with the problem? Any suggestions for a workaround?
    Thanks, Olaf
    Update: The same number of photos is taking up three times as much space than before.
    Message was edited by: olafoio

    Me too, but I have the solution.
    There seems to be 2 problems. First, for some reason your data is taking up more space post update, so if you were close to filling your device, you now overrun. This isn't well handeld by iTunes, but doesn't seem to be the biggest problem as I'm sure that would sort itself out if you could just get it to sync.
    The root problem is the 2nd one - the missing file. Mine was a photo, but it took me ages to find it and you're not going to like how I did it. I started to untick things to sync one by one (music first) and attempting the re-sync. I found that it was a file in my photos that was causing the problem, so I removed those and then re-loaded everything back up and I'm now OK again. I use Aperture to sync with.
    I had the same problem with the last OS update and it's a pain because it takes ages to sort with a nearly full 32G device.
    Now onto my iPad for an update, but that's proving to be a non-starter as the thing wont back up due to "another session in progress". More rooting around to solve that I guess......

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • Helloo! I have super big problem with my Air.

    Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
    btw. i created new user,and everything is working ok.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Big problem with Airport Extreme and Vivax Provider in Brazil

    Hello guys.
    I live in Brazil and I bought my Airport Extreme in a recent trip to USA.
    For some years I was a client of Telefonica and had an ADSL link, I had a D'Link G604T to do both the modem and router operation in the same box. I was happy with my connection of 1Mbps.
    In a recent promotion of Vivax I switched to a cable connection to have both TV and Internet at the same operator, my link now has 3Mbps.
    With this pack I also received free one RCA cable modem model DCM425B, it was installed fine in one computer only. Everything was fine my connection was faster the old one.
    So I went to install the Airport Extreme to make things even better.
    After I installed I went to see the web status of my modem, all parts were looking fine, but the modem could not see the computer. Bad sign.
    I talked to Vivax support people and apparently it was a problem with their network setup and they manage to make it right. My model now sees my computer.
    After that problem was solved I could not make AE to work with the modem, it had the green light and the setup looked fine, but I could not open any site. I tried to turn off my modem and AE, waited some minutes and turned on first my modem and after it was up I turned on AE. All lights looked fine but again no connection to any site.
    I called again the Vivax support center and they tried to help me but the don't know AE and they could not help me with all the details but said there was 2 10.x.x.x coming from my side. So I tried to use in bridge mode. I also selected the 192.x.x.x range instead of 10.x.x.x as default.
    After many setups and turn off and on again my connection is working but I have a big problem with wireless. If I turn it on I loose my connection, it seems that AE sends 2 equal ethernet address to Vivax and their network don't like it cutting me off.
    So my connection setup is like this:
    RCA Cable modem model DCM425B at 3Mbps using a 200.x.x.x ip
    Airport Extreme connected to a Mac and a Windows PC by wire using the 192.x.x.x range ip
    Wireless is off
    Bridge mode is on
    This the only way I could make it work.

    After a firmware update it worked fine.

  • Big Problem with Mighty Mouse

    I'm having a rather big problem with my wired Mighty Mouse. Basically, the middle button is the only top button that works, and clicking with the left or right side does nothing but activate the middle button instead.
    Here's the nitty gritty...
    The reason I can assume this happening is because I cleaned the scroll wheel to un-stick it. I did this by getting a sheet of white paper, turning the mouse upside down, and rubbing the wheel all over the paper, which left paths of dirt and fluff everywhere. Worked great, and the scroll wheel now works perfectly again.
    The mouse worked fine after that which is what makes this problem odd, but later that night, all the top buttons just started acting as one middle button... So, (using my tablet) I changed the setting for the middle mouse button in the preferences to 'Primary Button'.
    Now basically what I have is a one button mouse (with side squeezy things).
    How do I make the left and right buttons work again? The preferences are set up fine... as in the right side is assigned to 'Secondary Button', etc, but it still only works as middle mouse.
    Any ideas or help would be really appreciated!
    Cheers
    Cuby

    If you are going to replace it, consider getting a plain old optical mouse that uses Apple's built-in generic USB mouse driver. I like the ones from Microsoft that have two buttons, a clickable scroll wheels, and that's it. This is the one that I use now.
    [Microsoft Optical Mouse (Blue)|http://www.amazon.com/Microsoft-K81-00004-Optical-Mouse-Blue/dp/B000068M P2/ref=sr11?ie=UTF8&s=electronics&qid=1244701238&sr=8-1]
    It is reliable, comfortable, and sturdy. I've never cleaned it. And it's so cheap. I had a different basic Microsoft mouse before, and the only reason I got a new one was because I wore out the pads on the bottom that let it slide around.
    Tip: Apple's generic USB mouse driver does not seem to have way to set the center button click. But if you set it to something when the Mighty Mouse is connected, that setting seems to continue to work with the generic mouse. Mine is set to do Exposé.
    Not sure why you cannot do +reset PRAM+. If your internal speaker volume setting is muted so that you do not hear the startup sound, you need to turn up the volume a bit. The startup sound is your indicator (when you hear it for the second time) that you can let go of then four keys.

  • I have a big Problem with IMessage

    I have a big problem with IMessage. Yesterday I downloaded a new keyboard form the settings and option that says keyboard (Japanese) I deleted the keyboard shortly afterwards and now my IMessage will not let me type any messages. I do not know what to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Some problems with aperture 3

    I have some problems with aperture 3...
    //1
    I updated my library with aperture 3, and export some projects for make another one, everything works fine, I can switch the library very quickly...but when I want change my background in snow leopard, the first library ( current default ) don´t show anything, seems like don´t load well, the "aperture" shows right but without arrow for open the hierarchy, and if I switch the library ( the second one ) the background can load this library without problems, works with all folders, projects...
    I repaired the permissions, database and rebuild database but nothing happens.
    //2
    The second problem I think is the same. In Mail, iWork, iLife...the Media Browser don´t load my main library, only the second one, I have the last update installed, and the second library works fine, why not the first?
    //3
    I imported some projects from the one library to the other, for adjust my pipeline and make much easy my workflow, but if I import, for example, 2 folders with 4 projects, aperture import in my library 4 folders and 8 projects, the imported files are duplicated O_O
    I see the same stuff inside the folders, and when I delete one of them, the aperture delete the 2 "versions", but in the trash I see only one of them xD and if I put back the folder/project, again I see 2 versions xD
    I "fixed" creating new folders/projects and moving the photos manually...( with some crush in the process ) any idea about this problem?
    //4
    This problem is more as a enhancement...what happen if I want to sync different projects from my 2 libraries in my iPhone?? because iTunes only show me the last loaded library
    Regards,
    Jonatan

    many thanks for the answer
    not being very computer literate i will try and answer your question
    1st i tried to download a "fix" from apple support for Aperture3 but after changing the file name to Aperture.app
    as suggested by someone on forum I got the answer
    The version of Aperture installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available.
    by aperture is 3.2.2
    2nd in answer to your question,
    memory 2gb 667  Mhz DDR2 SDRAM
    I have 128.53 gb free out of 319.21 gb
    hope that helps

  • Problem with Aperture 3.6 Can't open Preferences

    I had a problem with Aperture 3.6; opened a new Library from the Vault, now cannot open Aperture Preferences. When I attempt to open preferences I get a very thin vertical line about 1 ½ inches long?? Any fixes for this/  Thanks, Vic

    Try to delete the Aperture preferences as described here at this link:
    Get help with Aperture 3 - Apple Support
    Steps to reset preference settings
    To reset your Aperture user preference settings to their original state, do the following:
    Quit Aperture.
    In the Finder choose "Go to folder" from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field. Press the Go button.
    Remove the "com.apple.Aperture.plist" file from the Preferences folder.
    Restart your computer if you're using OS X Mavericks.
    The locations of your Aperture libraries are stored in the preference file listed above. If you have stored your library outside the default location of  ~/Pictures/Aperture Library, make a note of where the library is before deleting the Aperture preferences file. If you have more than one library, you can bring up a dialog to choose which one to load by pressing Option immediately after you open Aperture.

  • Big problem with a select using remote database

    Hi Guy.
    I have a big problem with a simple query, but this is a scenario.
    Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 installed on Red Hat As 4.5 placed in Milano Italy . Ttwo networks are connected via two adsl cisco router with firewall and Vpn functions. In Egypt there isn't a very good adsl.
    In Alexandria, I'm trying to connect to database in Italy with sqlplus. The sqlplus connected I write.. select * from addetti and all work fine.
    My problem is that when I try to make the same select on a table with many columns oracle database kill me a session.
    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.
    So I began to change my query I start to
    select field1 from ic_lav... and work
    select field1,field2,field3,..........field50 from ic_lav and work
    select field1,field2,field3,..........field70 from ic_lav and doesn't work
    the select work with 68 columns
    problem: the query with more then 1064 byte for row doesn't work.
    I've tryed with anoter big table with the same problem, but the select fwork with 65 columns...
    Iit is obvious that there is any problem with the limit of the query.
    The same query (select * from ic_lav) in localMilano)l work fine.
    The same query (select * from ic_lav) in vpn with a better adsl line and openvpn software (NO CISCO firewall) WORK FINE.
    The same query connectetd in Milano with a vpn make with analogic modem and remote access by windows work fine.
    the query (make on my laptop connectet with vpn by cisco doesn't work.
    In cisco firewall we haven't any error (cisco man tell me so)
    on database 9 I found :
    *** 2009-06-12 09:49:45.509
    *** SESSION ID:(66.44406) 2009-06-12 09:49:45.497
    FATAL ERROR IN TWO-TASK SERVER: error = 12152
    *** 2009-06-12 09:49:45.509
    ksedmp: internal or fatal error
    Current SQL statement for this session:
    select * from ic_lis where ditta
    ----- Call Stack Trace -----
    but I don't understand why the lost connection problem (bug 3816595 A processstate dump is produced for a lost connection (12152) ) is caused by len of row
    Anybody have some idea ?
    Thank you

    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.Do you get any error?
    If the query length is a problem, you could create a view and query the view instead to see if this problem is resolved.

Maybe you are looking for