Big problem with photoshop cc

I have a problem with photoshop that had happened to me last year and I managed to sort by formatting my computer and came back this year. I was drawing on the software, when it suddenly closed. I then reopened the software, and there, my brush appear as pictured . The first 6 are the same ... They draw the same way as I draw mostly with " net pressure rounded size ."
I have reinstalled the software restored the computer to an earlier date, reset photoshop ... I really do not know what to do and I can not format the computer again ... If you have a solution , it would be really good! Thank you in advance,
Good evening .

erwana37861607 wrote:
Yes I know , except that these 6 brushes draw the same way , they are identical when I used , look at the attached image in the main message.
Select either the third or forth brush, and check its settings in Shape Dynamics. It should have Size jitter set to Pen pressure.
Now select the Sixth brush. In Transfer, Flow jitter should be set to Pen pressure
If those settings are correct, then it is your tablet that is at fault. Open the Wacom properties, and test Pen pressure (as below). If that works, then the tablet is not working with Photoshop, so check the driver is up to date. If it does not work, then there is an issue with the pen and or tablet. Restart your computer, try another USB port, check connections etc.

Similar Messages

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Big problems with installion Premiere Elements und Photoshop Elements 12

Big problems with installion Premiere Elements und Photoshop Elements 12 auf Windows 7, shared technologies not found. Tried all tips and notes from the community (6 hours work), nothing helped./
Habe Riesenprobleme mit Installation Premiere elements und PS elements 12, gemeinsam genutzte Technologien werden nicht installier, habe alle Hinweise aus den Foren bereits probiert (6 Stunden Arbeit). Wer weiß wirklichRat?

Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?product=premiere-elements

Little Problem with Photoshop CS3

Hi, I have a little problem with Photoshop CS3, I'm not sure if this's because a Windows option that I messed up, but the thing is that I didn't touch any options, or some kind of preferences.
I'm talking about the "little windows" (I don't know the correct name) that come from, in this case, the Filter and Analysis options, they're coming down from their right side, and usually, the come down from their left side. This is really annoying.
Not big deal, but I can't really work properly. I hope you guys can help me, and this's my first post, I hope I didn't break any rule.

Thanks Mylenium, that was the problem, I don't even have a tablet, but that fixed my problem =)
Thanks again.

Problem with Photoshop CS4 after migration to new Mac

I just migrated from an old Mac to a new Macbook Pro running Mavericks. I'm having a problem with Photoshop CS4. Specifically, two things:
1) When I open an image in Camera Raw, I get this error:
Fatal error - missing component
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
2) When I try to save anything, it tells me it can't because of a program error.
I've looked around for a solution. Apparently I had to install Java, but that hasn't solved the issue. A couple of people mentioned that reinstalling would work for a similar problem. My problem with that is that my disk is on the other side of the world and my new macbook doesn't have a disk drive anyway. So I logged into my Adobe account hoping to see a download link for software I have licences for, but there isn't one.
So my question is firstly, whether there is a simpler solution to the errors I am getting and, if not, if there's a solution to reinstalling Photoshop CS4 without the disk.
Thanks!

Did you use Apple's migration tool? It misses a lot of support files, especially in the Application Support directories.
You'll have to copy those files manually, or reinstall the app.

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Problem with photoshop on my mac

Hey...
I have some problem with photoshop on my mac...
When i open the photoshop my screen change his color...
The screen changes such delicate blue color.
and when i close the app the color has back to the original color.
photoshop cs 6 (master collection)
macbook pro 15"
OS X Mountain Lion
2.3 i7
4 giga ram
Have a nice day

Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
You can turn that off in photoshop cs6 under Window>Application Frame.
If that's not it, could you post a screenshot?

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Y have problems with Photoshop Elements 12 Bug after reinstallation complet Impossible working ??

Morning !
We have many problems with PHOTOSHOP ELEMENTS 12 ?
After installation on MAC OS X YOSEMITE .
S O S !!

Exporter vers photoshop do you receive any specific error messages? In what way is Photoshop Elements 12 not working?

Problems with Photoshop Elements 11

I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.

attach a screenshot of the error message.

Big problem with photoshop cc

Similar Messages

Maybe you are looking for