Big problem with Z2 after the update to Firmware 17.1.1.A.0.402

what can i do with my Z2 after the update to Firmware 17.1.1.A.0.402
the contact's app has stopped working everytime when i need too call someone on my contacts
on the screen i recieve messages ' android.process.com ' has stopped working , or process.contact.com has stopped working , etc. ...
i'm desperate , please help me !

switch of device via holding the power button and up vol button wait till it vibrates 3 times then switch on the device once powered on , turn off normally then switch on again and all should be fine

Similar Messages

TS1702 What is wrong with Pages after the update?

What is going on with Pages after the update?

Hey George.iD, you wrote on 6 Feb 2014, this:
Re: What is wrong with Pages after the update?in response to TRSPAGES
What's wrong with it?
As one thing after more-than a month later on 22 March, Pages _refuses_ to alter the color of text. How maddening this is: I select text, I select a crayon, but the text _remains_ black. < Pages is Incorrigible! :-( >
[After I vented steam, I feel better -- until later. What a cycle! :-) ]

I can't see apple store in my Itunes with windows7 after the update

I can't see apple store in my Itunes with windows7 after the update
a

Hi Markie,
It's not in the top window now, it's in the main section. When you plug your iPod in click on it and at the bottom of the window the Capacity pole changes as it adds stuff.
Is that what you're looking for?
Regards,
Colin R.

Big problem with photos after update to iOS 4.3

Hi everyone,
I have a big problem with the photos on my iPhone 4 after updating to 4.3
There is not enough space for them, anymore. Before the update I had about 9000 photos synced with iTunes -and I had about 10 GB free. Now, iTunes can't sync the photos anymore because there is not enough space on the iPhone??? The same amount of photos does not fit anymore. I suppose there is an error in the Itunes photo compression module. Anybody else with the problem? Any suggestions for a workaround?
Thanks, Olaf
Update: The same number of photos is taking up three times as much space than before.
Message was edited by: olafoio

Me too, but I have the solution.
There seems to be 2 problems. First, for some reason your data is taking up more space post update, so if you were close to filling your device, you now overrun. This isn't well handeld by iTunes, but doesn't seem to be the biggest problem as I'm sure that would sort itself out if you could just get it to sync.
The root problem is the 2nd one - the missing file. Mine was a photo, but it took me ages to find it and you're not going to like how I did it. I started to untick things to sync one by one (music first) and attempting the re-sync. I found that it was a file in my photos that was causing the problem, so I removed those and then re-loaded everything back up and I'm now OK again. I use Aperture to sync with.
I had the same problem with the last OS update and it's a pain because it takes ages to sort with a nearly full 32G device.
Now onto my iPad for an update, but that's proving to be a non-starter as the thing wont back up due to "another session in progress". More rooting around to solve that I guess......

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Mighty Mouse Slow after the updates of firmware 2.0.1 of bluetooth

Hello, yesterday update the Macbook Pro 17 Unibody (Mid 2009) and I suspect that the update of firmware bluetooth for Broadcom has achieved that my mighty mouse BT goes fatally, the keyboard goes of marvel, but I have tried with 2 Mighty Mouse and they work slowly and badly, also update these things yesterday, for if someone knows that it can have provoked it, and since it fixes up
Java 1.0, clients AirPort 2009/002, RAW Compatibility.
Thanks

Hello, yesterday update the Macbook Pro 17 Unibody (Mid 2009) and I suspect that the update of firmware bluetooth for Broadcom has achieved that my mighty mouse BT goes fatally, the keyboard goes of marvel, but I have tried with 2 Mighty Mouse and they work slowly and badly, also update these things yesterday, for if someone knows that it can have provoked it, and since it fixes up
Java 1.0, clients AirPort 2009/002, RAW Compatibility.
Thanks

Problems with java after the last update

Hi, yesterday I downloaded and install the last update available for Snow Leopard. After having installed the update, I had problems with Matlab (I use the version R2010a), and the error code is reported below. Do you think the error and the update are correlated? Do you have any idea of how to fix the problem?
Many thanks, and cheers!
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: 90
at java.lang.String.substring(String.java:1934)
at com.mathworks.widgets.tokenmatch.TokenMatchSyntaxLabel$PaintedBasicLabelUI.pain tEnabledText(TokenMatchSyntaxLabel.java:460)
at javax.swing.plaf.basic.BasicLabelUI.paint(BasicLabelUI.java:162)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:153)
at javax.swing.JComponent.paintComponent(JComponent.java:752)
at javax.swing.JComponent.paint(JComponent.java:1029)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at javax.swing.JLayeredPane.paint(JLayeredPane.java:567)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at java.awt.GraphicsCallback$PaintCallback.run(GraphicsCallback.java:34)
at sun.awt.SunGraphicsCallback.runOneComponent(SunGraphicsCallback.java:60)
at sun.awt.SunGraphicsCallback.runComponents(SunGraphicsCallback.java:97)
at java.awt.Container.paint(Container.java:1793)
at java.awt.Window.paint(Window.java:3375)
at sun.awt.RepaintArea.paintComponent(RepaintArea.java:276)
at sun.awt.RepaintArea.paint(RepaintArea.java:241)
at apple.awt.ComponentModel.handleEvent(ComponentModel.java:263)
at apple.awt.CWindow.handleEvent(CWindow.java:525)
at java.awt.Component.dispatchEventImpl(Component.java:4812)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4566)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:680)
at java.awt.EventQueue.access$000(EventQueue.java:86)
at java.awt.EventQueue$1.run(EventQueue.java:639)
at java.awt.EventQueue$1.run(EventQueue.java:637)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:653)
at java.awt.EventQueue$2.run(EventQueue.java:651)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:650)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:29 6)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:20 1)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: 90
at java.lang.String.substring(String.java:1934)
at com.mathworks.widgets.tokenmatch.TokenMatchSyntaxLabel$PaintedBasicLabelUI.pain tEnabledText(TokenMatchSyntaxLabel.java:460)
at javax.swing.plaf.basic.BasicLabelUI.paint(BasicLabelUI.java:162)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:153)
at javax.swing.JComponent.paintComponent(JComponent.java:752)
at javax.swing.JComponent.paint(JComponent.java:1029)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at javax.swing.JLayeredPane.paint(JLayeredPane.java:567)
at javax.swing.JComponent.paintChildren(JComponent.java:862)
at javax.swing.JComponent.paint(JComponent.java:1038)
at java.awt.GraphicsCallback$PaintCallback.run(GraphicsCallback.java:34)
at sun.awt.SunGraphicsCallback.runOneComponent(SunGraphicsCallback.java:60)
at sun.awt.SunGraphicsCallback.runComponents(SunGraphicsCallback.java:97)
at java.awt.Container.paint(Container.java:1793)
at java.awt.Window.paint(Window.java:3375)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:822)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:713)
at javax.swing.RepaintManager.seqPaintDirtyRegions(RepaintManager.java:693)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueue Utilities.java:125)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:678)
at java.awt.EventQueue.access$000(EventQueue.java:86)
at java.awt.EventQueue$1.run(EventQueue.java:639)
at java.awt.EventQueue$1.run(EventQueue.java:637)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:648)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:29 6)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:20 1)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188

Exception in thread "AWT-EventQueue-0" java.lang.NegativeArraySizeException
at org.netbeans.editor.DrawGraphics$GraphicsDG.flush(DrawGraphics.java:655)
at org.netbeans.editor.DrawGraphics$GraphicsDG.flush(DrawGraphics.java:522)
at org.netbeans.editor.DrawGraphics$GraphicsDG.setBuffer(DrawGraphics.java:756)
at org.netbeans.editor.DrawEngine.draw(DrawEngine.java:1116)
at org.netbeans.editor.DrawEngineLineView.paint(DrawEngineLineView.java:233)
at org.netbeans.lib.editor.view.GapBoxViewChildren.paintChildren(GapBoxViewChildre n.java:783)
at org.netbeans.lib.editor.view.GapBoxView.paint(GapBoxView.java:1463)
at org.netbeans.lib.editor.view.GapDocumentView.paint(GapDocumentView.java:231)
at org.netbeans.editor.DrawEngineDocView.paint(DrawEngineDocView.java:314)
at org.netbeans.editor.view.spi.LockView.paint(LockView.java:363)
at javax.swing.plaf.basic.BasicTextUI$RootView.paint(BasicTextUI.java:1423)
at javax.swing.plaf.basic.BasicTextUI.paintSafely(BasicTextUI.java:723)
at javax.swing.plaf.basic.BasicTextUI.paint(BasicTextUI.java:870)
at javax.swing.plaf.basic.BasicTextUI.update(BasicTextUI.java:849)
at javax.swing.JComponent.paintComponent(JComponent.java:752)
at javax.swing.JComponent.paint(JComponent.java:1029)
at javax.swing.JComponent.paintToOffscreen(JComponent.java:5146)
at javax.swing.RepaintManager$PaintManager.paintDoubleBuffered(RepaintManager.java :1515)
at javax.swing.RepaintManager$PaintManager.paint(RepaintManager.java:1446)
at javax.swing.RepaintManager.paint(RepaintManager.java:1260)
at javax.swing.JComponent.paintForceDoubleBuffered(JComponent.java:1065)
at javax.swing.JViewport.blitDoubleBuffered(JViewport.java:1612)
at javax.swing.JViewport.windowBlitPaint(JViewport.java:1573)
at javax.swing.JViewport.setViewPosition(JViewport.java:1118)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.vsbStateChanged(BasicScrollPan eUI.java:1029)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.stateChanged(BasicScrollPaneUI .java:1018)
at javax.swing.DefaultBoundedRangeModel.fireStateChanged(DefaultBoundedRangeModel. java:348)
at javax.swing.DefaultBoundedRangeModel.setRangeProperties(DefaultBoundedRangeMode l.java:285)
at javax.swing.DefaultBoundedRangeModel.setValue(DefaultBoundedRangeModel.java:151 )
at javax.swing.JScrollBar.setValue(JScrollBar.java:446)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.mouseWheelMoved(BasicScrollPan eUI.java:964)
at javax.swing.plaf.basic.BasicScrollPaneUI$MouseWheelHandler.mouseWheelMoved(Basi cScrollPaneUI.java:525)
at com.apple.laf.AquaScrollPaneUI$XYMouseWheelHandler.mouseWheelMoved(AquaScrollPa neUI.java:38)
at java.awt.Component.processMouseWheelEvent(Component.java:6462)
at java.awt.Component.processEvent(Component.java:6146)
at java.awt.Container.processEvent(Container.java:2085)
at java.awt.Component.dispatchEventImpl(Component.java:4736)
at java.awt.Container.dispatchEventToSelf(Container.java:2167)
at java.awt.Component.dispatchMouseWheelToAncestor(Component.java:4886)
at java.awt.Component.dispatchEventImpl(Component.java:4622)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Component.dispatchEvent(Component.java:4566)
at com.mathworks.mde.editor.codepad.Codepad$2.mouseWheelMoved(Codepad.java:209)
at java.awt.Component.processMouseWheelEvent(Component.java:6462)
at java.awt.Component.processEvent(Component.java:6146)
at java.awt.Container.processEvent(Container.java:2085)
at java.awt.Component.dispatchEventImpl(Component.java:4736)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Component.dispatchEvent(Component.java:4566)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4621)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4311)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4212)
at java.awt.Container.dispatchEventImpl(Container.java:2129)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4566)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:680)
at java.awt.EventQueue.access$000(EventQueue.java:86)
at java.awt.EventQueue$1.run(EventQueue.java:639)
at java.awt.EventQueue$1.run(EventQueue.java:637)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:653)
at java.awt.EventQueue$2.run(EventQueue.java:651)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:650)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:29 6)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:20 1)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Exception in thread "AWT-EventQueue-0" java.lang.NegativeArraySizeException
at org.netbeans.editor.DrawGraphics$GraphicsDG.flush(DrawGraphics.java:655)
at org.netbeans.editor.DrawGraphics$GraphicsDG.flush(DrawGraphics.java:522)
at org.netbeans.editor.DrawGraphics$GraphicsDG.setBuffer(DrawGraphics.java:756)
at org.netbeans.editor.DrawEngine.draw(DrawEngine.java:1116)
at org.netbeans.editor.DrawEngineLineView.paint(DrawEngineLineView.java:233)
at org.netbeans.lib.editor.view.GapBoxViewChildren.paintChildren(GapBoxViewChildre n.java:783)
at org.netbeans.lib.editor.view.GapBoxView.paint(GapBoxView.java:1463)
at org.netbeans.lib.editor.view.GapDocumentView.paint(GapDocumentView.java:231)
at org.netbeans.editor.DrawEngineDocView.paint(DrawEngineDocView.java:314)
at org.netbeans.editor.view.spi.LockView.paint(LockView.java:363)
at javax.swing.plaf.basic.BasicTextUI$RootView.paint(BasicTextUI.java:1423)
at javax.swing.plaf.basic.BasicTextUI.paintSafely(BasicTextUI.java:723)
at javax.swing.plaf.basic.BasicTextUI.paint(BasicTextUI.java:870)
at javax.swing.plaf.basic.BasicTextUI.update(BasicTextUI.java:849)
at javax.swing.JComponent.paintComponent(JComponent.java:752)
at javax.swing.JComponent.paint(JComponent.java:1029)
at javax.swing.JComponent.paintToOffscreen(JComponent.java:5146)
at javax.swing.RepaintManager$PaintManager.paintDoubleBuffered(RepaintManager.java :1515)
at javax.swing.RepaintManager$PaintManager.paint(RepaintManager.java:1446)
at javax.swing.RepaintManager.paint(RepaintManager.java:1260)
at javax.swing.JComponent.paintForceDoubleBuffered(JComponent.java:1065)
at javax.swing.JViewport.blitDoubleBuffered(JViewport.java:1612)
at javax.swing.JViewport.windowBlitPaint(JViewport.java:1573)
at javax.swing.JViewport.setViewPosition(JViewport.java:1118)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.vsbStateChanged(BasicScrollPan eUI.java:1029)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.stateChanged(BasicScrollPaneUI .java:1018)
at javax.swing.DefaultBoundedRangeModel.fireStateChanged(DefaultBoundedRangeModel. java:348)
at javax.swing.DefaultBoundedRangeModel.setRangeProperties(DefaultBoundedRangeMode l.java:285)
at javax.swing.DefaultBoundedRangeModel.setValue(DefaultBoundedRangeModel.java:151 )
at javax.swing.JScrollBar.setValue(JScrollBar.java:446)
at javax.swing.plaf.basic.BasicScrollPaneUI$Handler.mouseWheelMoved(BasicScrollPan eUI.java:964)
at javax.swing.plaf.basic.BasicScrollPaneUI$MouseWheelHandler.mouseWheelMoved(Basi cScrollPaneUI.java:525)
at com.apple.laf.AquaScrollPaneUI$XYMouseWheelHandler.mouseWheelMoved(AquaScrollPa neUI.java:38)
at java.awt.Component.processMouseWheelEvent(Component.java:6462)
at java.awt.Component.processEvent(Component.java:6146)
at java.awt.Container.processEvent(Container.java:2085)
at java.awt.Component.dispatchEventImpl(Component.java:4736)
at java.awt.Container.dispatchEventToSelf(Container.java:2167)
at java.awt.Component.dispatchMouseWheelToAncestor(Component.java:4886)
at java.awt.Component.dispatchEventImpl(Component.java:4622)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Component.dispatchEvent(Component.java:4566)
at com.mathworks.mde.editor.codepad.Codepad$2.mouseWheelMoved(Codepad.java:209)
at java.awt.Component.processMouseWheelEvent(Component.java:6462)
at java.awt.Component.processEvent(Component.java:6146)
at java.awt.Container.processEvent(Container.java:2085)
at java.awt.Component.dispatchEventImpl(Component.java:4736)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Component.dispatchEvent(Component.java:4566)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4621)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4311)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4212)
at java.awt.Container.dispatchEventImpl(Container.java:2129)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4566)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:680)
at java.awt.EventQueue.access$000(EventQueue.java:86)
at java.awt.EventQueue$1.run(EventQueue.java:639)
at java.awt.EventQueue$1.run(EventQueue.java:637)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:653)
at java.awt.EventQueue$2.run(EventQueue.java:651)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlConte xt.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:650)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:29 6)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:20 1)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Has anyone had problems with email after the IOS 5 update

I updated my phone to the IOS5 on Thursday and can't get emails from my yahoo account. i have deleted the email account from my phone and the added it back to start over and nothing. I am completly lost as to how to solve this problem, but I want m email back. Has anyone else had this problem.

I am having the same experience. I just update this morning and now can't get mail. Did you ever figure this out?

[Enlightenment E17] Problems with EFM after last Update [solved]

Hello Folks!
I'm having some very ugly problems with my Enlightenment E17 Desktop after the last full system upgrade. This problem has already been reported to the German Arch Linux community, but no response yet, but I can't figure out that nobody else troubles the same probs.
This is the following what I get when running pacman -Ss e17-svn
community/e-svn 42849-1 (e17-svn)
Enlightenment window manager DR17 (aka e17)
community/e_dbus-svn 42682-1 (e17-libs-svn e17-svn)
dbus abstraction layer for e17
community/ecore-svn 42854-1 (e17-libs-svn e17-svn)
Ecore is an abstraction layer for e17
community/edje-svn 42794-1 (e17-libs-svn e17-svn)
A graphical design and layout library based on Evas
community/eet-svn 42851-1 (e17-libs-svn e17-svn)
A data storage and compression library
community/efreet-svn 42759-1 (e17-libs-svn e17-svn)
freedesktop.org specifications for e17
community/eina-svn 42822-1 (e17-libs-svn e17-svn)
E17 file chunk reading/writing library
community/embryo-svn 42739-1 (e17-libs-svn e17-svn)
implementation of a C like scripting language for e17
community/evas-svn 42855-1 (e17-libs-svn e17-svn)
A hardware-accelerated canvas API for X-Windows
The problems that occur to me are following: I'm using EFM as file manager. It's not the best one, but it fits into the E17 concept - simple, lightweight, fast - and thats what I like. But, after the latest update, when I click a folder on my desktop, EFM now comes up in a stupid very tiny window. The window is so small, that I need to resize it every time to see any content. Before the update, everything worked fine, the EFM windows came up as they should.
Another problem I'm having with some applications, e.g. the Okular-Viewer, is that I'm not able to size down the window - it is always in full screen, and there's no chance to move it up (even not on the desktop preview widget) to move it down. Okular is always 100% filling my screen (over the height, only), and I'm not able to size it down. In the previous version, I didn't got this problems.
My question is now: is there any way to install the previous Enlightenment E17 packages? They where much better that this one... or will another update come out soon??
Thanks in advance for any help, any help is appreciated!
beachcoder
Last edited by beachcoder (2009-10-09 09:04:21)

Have you tried starting with a clean config and the default theme, it helps sometimes after big code changes?
If that doesn't help...
beachcoder wrote:My question is now: is there any way to install the previous Enlightenment E17 packages? They where much better that this one... or will another update come out soon??
If you find some mirror which keeps outdated packages that should not be a problem. Be sure to downgrade all of e17 packages (also some packages were deprecated and thus removed from the server during the last upgrade so you'd need to have those as well. You may still have those on your system though)
About a quick update, depends if Ican replicate it and if there is an easy fix. These things happen now and then with pre-alpha software when they do make major code changes. I try to test every update locally before putting it live but I of course can't test every single feature.
Last edited by pressh (2009-10-09 06:03:31)

Problems with Macbook after Software Update

I haven't updated my Macbook in a long time, so I decided it was time I probably did. Software Update had updates for iTunes, Quicktime, and a 2009-Security Update. Everything seemed to be going okay. After the downloading and installing finished, it said the Security Update couldn't be installed and moved it to the trash. Then it prompted me to restart my computer because the other two installed okay.
After restart, when my computer started back up, my Macbook is messed up. The doc is missing. I open a finder window, and it shows the main folders, but all the things on the right (where it shows the drive, applications, and such) is missing. I tried to back up my files, but it can't even read there is a blank disc inserted (keeps asking me to insert a blank disc). And it wont let me shut down my computer, or restart it. I click restart, and it seems like it accepts it, but it just doesn't do anything. The dashboard wont show up when you hit F12. This mac is all messed up.
I don't know what happened here, all I installed was iTunes and Quicktime from the Software Update (security update didn't install), and all this happened. Any idea what happened and how I can fix this?
I'm using Mac OSX Tiger 10.4.11.

Welcome to Apple Discussions.
There's a variety of things you could try, but first as to why it is doing this. Probably your drive was slightly corrupted. If it was minor you might not have noticed it, but when the updates tried to install, the whole thing compounded and led to a whole bunch of things missing.
First, try to repair your drive. Boot from the System installer disc that came with your computer or is the one for the version you currently have on there, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and does a bit of spring cleaning at the same time.
Reading
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
+Summary of above from BDaqua+ (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
Report back after you have done this. It may be that you have to use a more powerful utility such as Diskwarrior.
Once the drive is repaired you can try re-applying the two updates, though often it takes a full archive and install, plus re-application of all updates, to get everything working again.
[Mac OS X: About the Archive and Install feature|http://support.apple.com/kb/HT1710]
[Apple document about A&I in Tiger (10.4)|http://support.apple.com/kb/HT1545]
[X-Lab Archive and install|http://www.thexlab.com/faqs/archiveinstall.html]
[Kappy's A&I instructions|http://discussions.apple.com/thread.jspa?threadID=1823034]
*In most cases _make sure_ you select "Preserve Users & Settings"*
Finally, on updating:
Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

Problems with Installer after Security update

after installing the security update for 10.10.2, I've experienced really weird problems installing downloaded dog updates to any software on my machine. For example, tonight I downloaded the latest upgrade to Google Chrome. After downloading, I clicked on the dmg file to install the update. It took more than 20 minutes for the Chrome icon to appear in the install package, and 45 minutes to copy the .app file to the /Applications folder. This has happened multiple times with at least a half dozen unrelated pieces of software. None of this occurred before installing the recent security update. I'm running the early 2014. Mac Pro 6 core, 3.5gHz, with 32 GB Ram. Anyone else having this problem, or have a fix? Needless to say, it is really annoying, not to mention really interferes with my productivity. Once the installer gets going in one of these cycles, it is impossible to force-quit, and the only way to get out of whatever loop it is in is to shut the machine down.

after installing the security update for 10.10.2, I've experienced really weird problems installing downloaded dog updates to any software on my machine. For example, tonight I downloaded the latest upgrade to Google Chrome. After downloading, I clicked on the dmg file to install the update. It took more than 20 minutes for the Chrome icon to appear in the install package, and 45 minutes to copy the .app file to the /Applications folder. This has happened multiple times with at least a half dozen unrelated pieces of software. None of this occurred before installing the recent security update. I'm running the early 2014. Mac Pro 6 core, 3.5gHz, with 32 GB Ram. Anyone else having this problem, or have a fix? Needless to say, it is really annoying, not to mention really interferes with my productivity. Once the installer gets going in one of these cycles, it is impossible to force-quit, and the only way to get out of whatever loop it is in is to shut the machine down.

Tecra S1 - problems with touchpad after BIOS-update to 2.50

Hi,
after the BIOS-update to version 2.5, the touchpad doesn't do anything. Starting in the docking station, the optional PS2 mouse works without any problem. Starting undocked, the touchpad doesn't work anymore. Normally - before update - the touchpad started it's work immediately after undocked booting.
What can I do to reactivate the touchpad???
Wanky

Hi Jeffrey,
thank you for your tips!
First I tried the hotkeys. All hotkey combinations work successful - except for the touchpad key F9...
After reinstallation of the touchpad driver, undocking the Tecra and disconnecting the USB-mouse I started with the Toshiba HWSetup tool to switch the functionality of the pointing devices to simultaneously. After installing the touchpad driver and repeated booting of the Tecra -> no progress.
After all examinations, no step further... I'm tired...
If you have another ideas, please let me know.
Kind regards,
Uwe

BIG PROBLEMS WITH IPHOTO AFTER MAVERICKS DOWNLOAD

Hi! I´ve read all about iPhoto and mavericks problem on diferent questions and answers around Communities and done every one of the suggestions and still can't fix it, I´vd already erased iPhoto (hoping my photos are alive, if not im dead!!!) so that I buy anew the app but I can't it just simply says "accept" but can't buy it. What can I do plis help believe me I tried EVERYTHING. FYI, my iPhoto came with my Mac Book Pro since new. Pleeeeeaaaaseeee help me I really need to recover my photos and work on the app. Thank you very much

I have the same problem since I "upgraded" to OS X Maverics. I can't open iPhoto, because it says my version is old (version 9.2.1.). When I try to download the update, it tells me my iPhoto was purchased with a differed Apple ID (it already came with my MacBook Pro bought last year!!) and need to update under the same Apple ID (?). This is very frustrating!!

Problem with homesharing after Itunes update

Update Itunes yesterday (10.4.1) Now AppleTV can not connect anymore.
Can not start home sharing in latest version.
Can anyone help please?
Erik

Just as a follow up: creating the "dummy library" mentioned in the above did not solve the issue ... it was worth a shot, though...
In the meantime, I'm getting more and more convinced that it's the ATV2's firmware that's the culprit, not iTunes itself. Like some others I've read about, I have Virus Barrier X6 installed, which did initially block traffic from the ATV2, due to "exessive" queries, but even putting the ATV2's IP on the white list did no good to the problem as a whole.
I've now started loading my iPad with the movies I want to watch and sending them to the ATV2 via AirPlay, which seems to work just fine (as a work around until some other solution becomes available). Am also going to rebuild my wirless network and try connecting the ATV2 to a closer AE base station via Ethernet in an effort to get even better wireless reception. For some reason, however, my iMac, which is only 3 meters from the TC base station is only registering 55% reception (using iStumbler to get this info).
If anybody hears of any improvements in the pipeline (from Apple or through the community), PLEASE post them!
Many thanks and here's hoping for a solution SOON.

Big problem with Z2 after the update to Firmware 17.1.1.A.0.402

Similar Messages

Maybe you are looking for