Big problems with AA8.1.2 and XP/Office 2007

I've had so many problems with AA8.1.2 since I got this new laptop that I'm about to trash the entire machine :^(
Everytime I start any Office product, Windows Explorer or anything that seems to be using the shell, AA launches in to the installer then aborts with ERROR 1606 Could Not Access Network Location \Startup. I'd just as soon uninstall AA altogether at this point but it even fails its own uninstall with the same error. With the Office products, I get the following error on top of the Error 1606 which says Compile Error In Hidden Module: DISTMON. I get this when the product (Excel, Word, etc.) starts up and when it exits.
Can somebody help me here? I've searched the KB and the only article I find is no solution; following its instructions didn't help a bit. I can't even install any AA updates (that I hope might solve the problem) because of the same installation error.
Thanks.

I get the same message whenever I try to install Adobe 8.1.0 (received from Adobe last week) on a new computer running Vista Ultimate. I have completed all the actions in MS KB 886549 to no avail. I also copied the complete Adobe folder from the CD to the Desktop and ran the install program and the .msi program as an Administrator and had the same results. I spent a little over a half hour yesterday on the phone with Tech Support and still have the same problem. A search on the error message on the Internet shows that there are a lot of other people having this same problem. I hope someone comes up with a solution soon or it is back to the old computer (XP with SP3 and Adobe 7).

Similar Messages

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

VERY BIG PROBLEMS WITH MY ZEN MICRO AND MEDIASOURCE! PLEASE PLEASE PLEASE HELP ME! PLEASE RESPOND

Ok so a while back I had to give up my computer because it wasn't working.
I thought that with my new computer I'd be able to transfer all of my music from my zen micro onto my new computer.
Now my new computer is set up and I have installed creative mediasource and everything. I started to transfer my music from my zen onto my computer. My first 2 songs transfered successfully onto my computer. On the third song, I get this message:
"Unable to read file, file may be in use, missing, or corrupted."
I thought that maybe it was just that one song so I shrugged it off. But then it says the same thing for every single other song that i have! Only my first 2 songs out of my entire music library on my zen will transfer!!!
Please i really need your help!!!
And say that there is no hope in getting the rest of my songs to transfer and i have to download 094 songs from limewire? I'll surely be arrested for downloading that much! What should i do if i must download all of them?
And one more problem with my zen: Some of my Jump Little Children songs are doing something weird. The song will be fine and then a clip from another song will play during it! And then press next and it just keeps playing all of my Jump songs in order even though my player is on shuffle and they do the same thing with the clip from another song interupting it. Whats going on?
Most importantly though, i really need the questions answered about transfering from my zen to my computer because i'll be getting a new player soon. But this is my entire music library at stake!! PLEASE RESPOND!!!

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

Big problems with Windows 2003 Server and FX5900

Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type:   Error
Event Source:   nv
Event Category:   None
Event ID:   108
Date:      18/07/2004
Time:      13:28:25
User:      N/A
Computer:   HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
Will

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   Creative SB Audigy   OK
IRQ 16   NEC PCI to USB Open Host Controller   OK
IRQ 17   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 17   NEC PCI to USB Open Host Controller   OK
IRQ 18   NEC PCI to USB Enhanced Host Controller (B1)   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA nForce MCP Networking Controller   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   OHCI Compliant IEEE 1394 Host Controller   OK

Problem with database tool kit, and MS Office Tool kit.

One of my programmer's who has the Office tool kit noticed this on Monday, and we haven't been able to find the problem yet.
We use the database connectivity reads and writes to a MS Access database. This program reads the data from a Symbol Scanner, and then inputs it into the database. He then has a query that to create a data table to pump into the MS Toolkit to build a MS World file (This is for a Bill of Lading).
What we found it that it works really well the first time, and on any further runs it will not update the database with any new data. It starts working again if we do a restart on the computer. It seems like something is not freeing up the database. He is freeing all the tables and closing the DB connection at each process, and everything else seems to be doing everything else right. I think the problem is that it goes into this MS Toolkit to make the table that goes on the Bill of Lading.
I did a modification that makes it read from an excel file on my desktop, and I found that it is doing the same thing. I deleted the report generator part of the program, and found that it will update the database properly. I have no clue.
here is the machine specs:
labview 8.6
Database connectivity toolkit 1.0.2
Report generator toolkit MS Office 1.1.3
MS Office 2007, the file is a Office 2003 format,

Given that the code still fails when talking to a excel file it sounds like this isn't really related to the database. Can you post a bit of your that shows the problem. Beyond that, be looking for things in the code that change between subsequent interations -- things like shift registers, globals, etc.
On the other hand, the fact that you have to restart the computer would tend to indicate that there is something going on with the MS Office side of things. To be clear: shutting down and restarting LV is NOT sufficient to clear the problem?
When the problem is occurring, if you shut down LV and open the Task Manager do you see (on the Processes tab) any MS Office components still running?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problem with Courier font since upgrading to Office 2007

Hi everybody,
Since we upgraded to Office 2007, one of our Acrobat users (he is the only person in the firm really using Acrobat actually) has problems when exporting Word documents to PDF.
So he is using Word 2007 and Acrobat Pro 9 (included in the CS4), he is modifying documents that were created with earlier versions of Word and the problem he has is since he has upgraded to Office 2007 (he was already using Acrobat Pro 9 without problem with Word 2003), text in the Courier font is replaced by those rectangles like unknown characters :
So I would like to know what has changed in Word 2007 that makes it that the Courier font cannot be exported to a PDF (from what I read it is one of the standard fonts always included in PDF readers), if I can change some settings to fix it without modifying all the Word documents or at least get a warning when it is going to happen.
Indeed the user's biggest concern is that he doesn't even receive a warning that that specific font won't be output correctly so he might change only some text or images in the Word document and export it to PDF and he will still have to check the whole document to make sure there was no Courier text that didn't make it through.
P.S. He is using the Adobe PDF printer to do the export.
Thanks.
Jonathan V.

Actually, I have a bit more information to share :
In the PDF files created before upgrading to Office 2007 (with Word 2003), I can see that Courier - Type 1 - ANSI is partially embedded (I thought it was supposed to be one of the base/system fonts).
I tried to export one of the Word documents affected again, replacing part of the Courier text with the Courier New font to see if it would work, the text in Courier New is showing correctly while the text in Courier still shows as squares.
When I check the fonts in the PDF file, CourierNewPSMT - TrueType - ANSI, is embedded (not partially ??) and Courier - TrueType - ANSI is partially embedded.
So I don't understand why Courier was embedded as Type 1 (but it worked) and now it supposedly embeds a TrueType Courier font that doesn't seem to work.
Again, the major problem is that there is no warning that the font won't output correctly, so you have to check the whole document again or you might end up with some parts unreadable.

Problems with EXCELSIUS 2008 after upgrading MS-Office 2007 to SP2 ??

Hi Community,
has anyone experienced how EXCELSIUS 2008 works after upgrading MS-Office 2007 to the new SP2 ??
(including "2007 MS Office Suite Service Pack2 (SP2)" and "MS Office Compatibility Pack Service Pack 2 (SP2)" and "Security Updates for MS Office System 2007 (KB969618)" and "Update for 2007 MS Office System (KB967642)")
We're going to upgrade our PCs and need to know about any possible trouble/problems with our mission critical applications (and EXCELSIUS was identified as one of them
Thanks in advance ...
Peter

I'm not sure if MS Office 2007 SP2 will actually cause any problem, but according to the supported platform list for Xcelsius 2008 SP1, MS Office 2007 SP2 is not listed (Office 2007 is).
Other Tools
=============
Office      (Excel, PowerPoint, Outlook, Word)
Windows Office 2003
Windows Office 2003 SP1
Windows Office 2003 SP2
Windows Office XP SP3
Windows Office 2007
Fix packs typically do not include additional platform support, so I believe that 2007 SP2 is still not supported as of FP3. I'm pretty sure though that Office 2007 SP2 will be supported in the very near future...

[GeForce 6] Big Problems with NX6600GT VTD128 AGP and Video Overlay

Got trouble to Install the NX6600GT VTD128 AGP VGA-Adapter right.
I already tried out with latest Drivers from MSI 71.22 and the ForceWare 66.93 NVidiadrivers, but no Overlay at all in my Grabbing Software.
It's a DV-Storm of Canopus with Storm Edit installed. With my Ti4200 (also MSI VGA-Card) never had those Problems.
In the Canopus Storm-Edit Software is an Preview-Window to check the grabbing Process. Now, with the new 6600GT Card it's a black screen.
When I press any key, shortly I see a TV Picture. It's an Overlay Problem of the 6600GT.
How do I have to install/configure the 6600GT VGA that Overlay is working fine.
The System:
Intel P4 HT 3,2 GHz
ASUS P4P800 with AGP 8x
DV-Storm in PCI Slot 2
IDE Raid Promise Fasttrack 100
1024 MB DDR400 Corsair CL2
Latency Timer on 128 (doesn't work with PCI Latency Timer = 64 too)
DirectX 9.0c, XP with SP2 and latest Patches, MSI-Driver Version 71.22 (or Reference Driver 66.93 NVidia)
This Configuration is working fine (Overlay = OK) when re-install the GeForce4 Ti4200 of MSI
>>>Problem solved<<<
.....a wonderful Canopus Patch to "clean" the ForceWare Drivers like a big LIGHT in the Nvidia-DARKNESS gives hope and wellness to my PC

I found the solution while I cruised in the forum, I used Driver Cleaner to erase the driver file on my HD, and the installation worked perfectly... Sorry about my useless post
If it can help another one...

Big problems with my graphic card and 865neo2

i am using
msi865pe neo2(no lan)
p4 2.8 800mhz
2X512mb kinstom ram
sapphire radeon graphic card
sound blaster exdigy
msi dvd
msi cdrw 52m
there is a very weird problem tt i am facing now,the latest radeon catalyst is 3.8,but when i use this driver,my computer always shut down suddenly when i play games,but when i use catalyst 3.2,there is no problem and everything works well(from 3.2~3.8 all with errors)
does it relate to agp8x setting? cos radeon9600pro is running on 0.8v right,but why i can only set the votage upto 1.5v?
anyone knows why?

Actually there'll be something like this:
+3.3v -> 28A
+5v -> 32A
+12v -> 22A
-5v -> 0.5A
-12v -> 0.5A
Please check again.

Still big problem with "Adobe AIR 16" and "Adobe AIR 17"

Device:Iphone 6 e Iphone 6 plus
My application xml:
    <fullScreen>true</fullScreen>
    <aspectRatio>landscape</aspectRatio>
    <renderMode>cpu</renderMode>
    <autoOrients>false</autoOrients></initialWindow
When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
Adobe is not the same as a few years ago, instead of solving the problems they create.
With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
HelpMeeeeeeeee

Device:Iphone 6 e Iphone 6 plus
My application xml:
    <fullScreen>true</fullScreen>
    <aspectRatio>landscape</aspectRatio>
    <renderMode>cpu</renderMode>
    <autoOrients>false</autoOrients></initialWindow
When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
Adobe is not the same as a few years ago, instead of solving the problems they create.
With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
HelpMeeeeeeeee

BIG problems with setup after Archive and Install

It all began when I was preparing a G3 iMac to be used - as a trial - by a Windows user. I wanted to preserve the existing accounts so created a new user. I then forgot the new user password (didn't write it down, did I) and had already set it up to go straight to the login screen on boot. Do you think I could then remember the user name of the original account(this time I knew the password)? I researched and was able to set up a new password for the System Administrator via the Install Disk, and hoped that it would show me the existing user names - it didn't. Despite my best efforts, I was still unable to login. By this stage, the gremlins were really getting to me.
I then decided to do an Archive and Clean Install - after I had repaired disk permissions, disk etc. So far so good, as everything seemed to go OK and the Mac restarted and presented the Welcome screen and I proceeded with setup, like it was a brand new Mac.
After going through the first couple of screens where Apple collects information and moving onto where you can start setting up accounts, the thing just hangs with a blank screen with a grey horizontal line about two-thirds down prior to actually reaching this account setup stage. In spite of every other attempt, I just cannot past this stage. Truly weird.
Next, I upgraded my Firewire Disk from OS9 to OSX using the same installation disks and everything went swimmingly, including the creation of accounts. I have been able to boot normally from this Firewire disk and can see everything on my internal HD. I tried reinstalling the OS again - it still hangs in exactly the same set up stage - "siiigh". I'm now getting seriously ****** off with this process and have more or less decided to clone all the appropriate files from the internal HD, erase the drive and start all over again!
I really don't want to go to this level, and besides, I'm really curious to find out what on earth has gone wrong, and hope forum members can help me out here. I appreciate all responses..... Thanks
PatM

BDAqua wrote:
Seems the HD is bad, but whether it could be fixed by Erasing and using the Zero Data Option, once... only time will tell.
IDE HDs don't last all that long... 4 year old ones make me hold my breath!
Thanks for your reply. If the internal drive is bad, why didn't it show up when I ran Disk Utility repair? I don't think I'll try to resurrect it now if that is a possibility.
I had thought of swapping the drive in the Firewire case into the iMac and vice-versa. I have to say that this G3 has now been replaced by a newish MacBook - chiefly to preserve using Tiger (with Classic support) for all the legacy items that my partner was using on the G3. My partner's 91 y.o. mother will be visiting from Perth (the other side of Oz from us) and loves using the Mac, so I now propose the following:
1. Retrieve critical files (if any left) from the G3 internal HD;
2. Swap the drive as above - mind you, I've never changed an HD in an iMac, but after 20 years of mucking around with all sorts of Macs, fancy my chances here - especially as I come from the READ THE MANUAL school of support.
3. Buy a new IDE HD for the Firewire case, load it up with troubleshooting apps. which would then give me a tool for looking after our other Macs.
Any other suggestions?
PatM

Hot Synch with Windows XP and MS Office 2007

I can not synchronize my Palm Treo 680 Unlocked with Windows XP Home and MS Office 2007.
I see several comments regarding Outlook 2007. Is resolving the synchronization of Outlook 2007 the same solution as Office 2007?
If so what is the solution?
Post relates to: Treo 680 (Unlocked GSM)

I also cannot synch my Palm Treo 680 unlocked with Outlook 07 using Vista. It says "Hot Synch Operation Completed Successfully", but nothing did synch. I downloaded palmoutlook07conduits.zip and there was no change. I was synching wirelessly using Microsoft Exchange Active Synch without problems, but when I cancelled my 'data' package on my cell phone, it no longer was synching. I tried reloading my original Palm CD, but it doesn't allow me to select 'Outlook' as my connectivity. Please help. And please don't provide me with a bunch of acronyms as I won't understand them!!!!
Thanks,
Post relates to: Treo 680 (Unlocked GSM)

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

Big problems with AA8.1.2 and XP/Office 2007

Similar Messages

Maybe you are looking for