Big Size messages stuck in TOPIC
Hi Experts,
I am facing one issue, when receive messages coming from sim to rms, sometimes it took long time to replicate and sometimes stuck (we take the backup and republish then). I check and found its big size messages, please advice. Environment is R13.
Thanks
Hi,
Let me know RIB version 13.1 or 13.2
Also for the families having problem post an extract from RIB_SETTINGS table.
Regards,
PPS
Similar Messages
-
I can't download the apps with big size like need for spees
Have a little patience. 4 minutes is only a short time for someone to find your post and reply to it. Also clicking on "This Solved My Problem" marks your problem as solved so many folks that may otherwise help will pass the question by since it is "solved."
I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. -
I am running PI7.0 SP10 on a MCOD system running ECC6.0 and EP.
We had an issue last week on our Production system where the Java Stack went down, and when the system came back up, we cleared the issues in SMQ1, SMQ2 and SM58 and now we have over two hundred messages stuck in the java queues.
There is nothing locked in SM13, in sxmb_moni all the messgaes are successfully processed... In the RWB the status of the messages are "To be delivered".
I have tried reactivating the adapters but this has not worked.
The queues can be seen in the http://host.fqdn:5<SYSNO>00/MessagingSystem/monitor/systemStatus.jsp
specifically : File_http://sap.com/xi/XI/SystemRecv
and
SOAP_http://sap.com/xi/XI/SystemRecv
where the "isStarted" is set to false, where all the others are true...
How can I go about starting these and processing the backlog of messages??
I have searched OSS, SDN and SAPFans but had not luck!
I have subsequently done a full cache refresh and CPACache refresh but this has not helped.
There are no locked users (XI/PI users) holding this up!Ok,
It seems to be ok, the return can be http 200 or http 500.
The Soap and File are destinations, ok.
The messages are with status "delivering" on rwb... really, increasing the number of threads will not solve this...
I don't have access to visual admin (only basis team can access it here). I thought it could be something wrong with destination (but you already checked it)... so, the only thing can be done is to find in visual admin somewhere about system properties, conection parameters searching for something wrong there... here are our parameters if you would like to find something (sorry for the size of message)...
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
BC_http://sap.com/xi/XI/System.Call.maxConsumers 20
BC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
BC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
BC_http://sap.com/xi/XI/System.Send.maxConsumers 10
BcAdapter.Call.maxConsumers 10
BcAdapter.Recv.maxConsumers 5
BcAdapter.Rqst.maxConsumers 10
BcAdapter.Send.maxConsumers 5
CIDXAdapter.Call.maxConsumers 10
CIDXAdapter.Recv.maxConsumers 5
CIDXAdapter.Rqst.maxConsumers 10
CIDXAdapter.Send.maxConsumers 5
CIDX_http://sap.com/xi/XI/System.Call.maxConsumers 20
CIDX_http://sap.com/xi/XI/System.Recv.maxConsumers 10
CIDX_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
CIDX_http://sap.com/xi/XI/System.Send.maxConsumers 10
EOIO.lockTimeout 5
File_http://sap.com/xi/XI/System.Call.maxConsumers 20
File_http://sap.com/xi/XI/System.Recv.maxConsumers 10
File_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
File_http://sap.com/xi/XI/System.Send.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
JMS_http://sap.com/xi/XI/System.Call.maxConsumers 20
JMS_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JMS_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JMS_http://sap.com/xi/XI/System.Send.maxConsumers 10
JPR.Call.maxConsumers 10
JPR.Recv.maxConsumers 5
JPR.Rqst.maxConsumers 10
JPR.Send.maxConsumers 5
MPA.Call.maxConsumers 10
MPA.Recv.maxConsumers 5
MPA.Rqst.maxConsumers 10
MPA.Send.maxConsumers 5
Mail_http://sap.com/xi/XI/System.Call.maxConsumers 20
Mail_http://sap.com/xi/XI/System.Recv.maxConsumers 10
Mail_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
Mail_http://sap.com/xi/XI/System.Send.maxConsumers 10
Marketplace_http://sap.com/xi/XI/System.Call.maxConsumers 20
Marketplace_http://sap.com/xi/XI/System.Recv.maxConsumers 10
Marketplace_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
Marketplace_http://sap.com/xi/XI/System.Send.maxConsumers 10
RFC_http://sap.com/xi/XI/System.Call.maxConsumers 20
RFC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
RFC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
RFC_http://sap.com/xi/XI/System.Send.maxConsumers 10
RNIF11Adapter.Call.maxConsumers 20
RNIF11Adapter.Recv.maxConsumers 10
RNIF11Adapter.Rqst.maxConsumers 20
RNIF11Adapter.Send.maxConsumers 10
RNIF11_http://sap.com/xi/XI/System.Call.maxConsumers 20
RNIF11_http://sap.com/xi/XI/System.Recv.maxConsumers 10
RNIF11_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
RNIF11_http://sap.com/xi/XI/System.Send.maxConsumers 10
RNIFAdapter.Call.maxConsumers 10
RNIFAdapter.Recv.maxConsumers 5
RNIFAdapter.Rqst.maxConsumers 10
RNIFAdapter.Send.maxConsumers 5
RNIF_http://sap.com/xi/XI/System.Call.maxConsumers 20
RNIF_http://sap.com/xi/XI/System.Recv.maxConsumers 10
RNIF_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
RNIF_http://sap.com/xi/XI/System.Send.maxConsumers 10
SOAP_http://sap.com/xi/XI/System.Call.maxConsumers 20
SOAP_http://sap.com/xi/XI/System.Recv.maxConsumers 10
SOAP_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
SOAP_http://sap.com/xi/XI/System.Send.maxConsumers 10
bulkCommit.threshold 100
cluster.timeout 60000
connection.0.ackListener null
connection.0.exceptionListener localejbs/AFWListener
connection.0.jms.messageSelector null
connection.0.jms.profile null
connection.0.jms.provider null
connection.0.jms.queue null
connection.0.messageListener localejbs/AFWListener
connection.0.name AFW
connection.0.pollAttempts 60
connection.0.pollInterval 60000
connection.1.ackListener localejbs/MarketPlaceAdapterListener
connection.1.exceptionListener localejbs/MarketPlaceAdapterListener
connection.1.jms.messageSelector null
connection.1.jms.profile null
connection.1.jms.provider null
connection.1.jms.queue null
connection.1.messageListener localejbs/MarketPlaceAdapterListener
connection.1.name MPA
connection.1.pollAttempts 60
connection.1.pollInterval 60000
connection.2.ackListener null
connection.2.exceptionListener localejbs/JPR
connection.2.jms.messageSelector null
connection.2.jms.profile null
connection.2.jms.provider null
connection.2.jms.queue null
connection.2.messageListener localejbs/JPR
connection.2.name JPR
connection.2.pollAttempts 60
connection.2.pollInterval 60000
connection.3.ackListener null
connection.3.exceptionListener localejbs/RNIFMessageListener
connection.3.jms.messageSelector null
connection.3.jms.profile null
connection.3.jms.provider null
connection.3.jms.queue null
connection.3.messageListener localejbs/RNIFMessageListener
connection.3.name RNIFAdapter
connection.3.pollAttempts 60
connection.3.pollInterval 60000
connection.4.ackListener null
connection.4.exceptionListener localejbs/CIDXMessageListener
connection.4.jms.messageSelector null
connection.4.jms.profile null
connection.4.jms.provider null
connection.4.jms.queue null
connection.4.messageListener localejbs/CIDXMessageListener
connection.4.name CIDXAdapter
connection.4.pollAttempts 60
connection.4.pollInterval 60000
connection.5.ackListener localejbs/BcAdapterListener
connection.5.exceptionListener localejbs/BcAdapterListener
connection.5.jms.messageSelector null
connection.5.jms.profile null
connection.5.jms.provider null
connection.5.jms.queue null
connection.5.messageListener localejbs/BcAdapterListener
connection.5.name BcAdapter
connection.5.pollAttempts 60
connection.5.pollInterval 60000
connection.6.ackListener null
connection.6.exceptionListener localejbs/TestListener
connection.6.jms.messageSelector null
connection.6.jms.profile null
connection.6.jms.provider null
connection.6.jms.queue null
connection.6.messageListener localejbs/TestListener
connection.6.name test
connection.6.pollAttempts 60
connection.6.pollInterval 60000
connection.7.ackListener null
connection.7.exceptionListener localejbs/RNIF11MessageListener
connection.7.jms.messageSelector null
connection.7.jms.profile null
connection.7.jms.provider null
connection.7.jms.queue null
connection.7.messageListener localejbs/RNIF11MessageListener
connection.7.name RNIF11Adapter
connection.7.pollAttempts 60
connection.7.pollInterval 60000
connections (name=AFW, messageListener=localejbs/AFWListener, exceptionListener=localejbs/AFWListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=MPA, messageListener=localejbs/MarketPlaceAdapterListener, exceptionListener=localejbs/MarketPlaceAdapterListener, ackListener=localejbs/MarketPlaceAdapterListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=JPR, messageListener=localejbs/JPR, exceptionListener=localejbs/JPR, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=RNIFAdapter, messageListener=localejbs/RNIFMessageListener, exceptionListener=localejbs/RNIFMessageListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=CIDXAdapter, messageListener=localejbs/CIDXMessageListener, exceptionListener=localejbs/CIDXMessageListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=BcAdapter, messageListener=localejbs/BcAdapterListener, exceptionListener=localejbs/BcAdapterListener, ackListener=localejbs/BcAdapterListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=5, Recv.maxConsumers=5, Call.maxConsumers=10, Rqst.maxConsumers=10)(name=test, messageListener=localejbs/TestListener, exceptionListener=localejbs/TestListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=20, Rqst.maxConsumers=20)(name=RNIF11Adapter, messageListener=localejbs/RNIF11MessageListener, exceptionListener=localejbs/RNIF11MessageListener, pollInterval=60000, pollAttempts=60, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=20, Rqst.maxConsumers=20)
debug HTTP
failover.reassignOnNodeLoss true
initial.delay 0
jdbc.autoConfigure false
jdbc.datasource jdbc/SAP/BC_XI_AF_MSG
jdbc.dbProductName ORACLE
jdbc.substituteEmptyString true
jdbc.supportsOpenSQL true
jdbc.supportsScrollableResultSet false
jms.0.dmq SonicMQ.deadMessage
jms.0.messageLengthKey message_length
jms.0.password ********
jms.0.provider
jms.0.url
jms.0.username
monitoring.displayDefault fromParty, toParty, status, timesFailedRetries, sentRecvTime
persistMessageRemover.checkInterval 1440
proxy.password ********
proxy.user
reassignCheck.waitTime 30
ssl.httpsHandler iaik.protocol.https.Handler
ssl.securityProvider iaik.security.provider.IAIK
ssl.serverNameCheck false
ssl.trustedCACerts.viewName TrustedCAs
startup.delay 0
syncMessageRemover.checkInterval 60
syncMessageRemover.messageCount 1000
syncMessageRemover.removeBody true
system.deafaultMaxConsumersPerQueue 10
system.failNonDelivered false
system.message.lazyRead true
system.node 23654950
system.queueConsumerThreadPoolSize 0
system.statusLog System,Send,Recv,Call,Rqst
system.transactionManager ts
test.Call.maxConsumers 20
test.Recv.maxConsumers 10
test.Rqst.maxConsumers 20
test.Send.maxConsumers 10
throughputStatistics enabled
regards
roberti -
When I run a big size exe file(>900 MB) on Windows Storage Server 2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.). we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
Server 2003 x86 SP2 OS VM machine). So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
My questions:
1. Is there the limitation of exe size to run on Windows
Storage Server 2003 x86 SP2 OS VM machine? If yes, what is the size of limitation?
2. What reason is this error? Is it related with Hyper-V?
Thanks,
ReckyDid you install the 2003 VM from scratch or did you create it via a P2V process? In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things.
First thing to check would be Shaon's suggestion to try it in another VM. If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again. Better yet, if the application can be run on a later version
of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
.:|:.:|:. tim -
Cant't generarte PDF with big size
Helllo,
If I want generate PDF with a big paper-size (example 1.000 x 2.200 mm) nothing will done (tested with differnt files and different joboptions an different big sizes).
No Dialog, no window ... nothing. Sometime I can see for a short time the printer icon. But .... If I say "Okay take only 210 x 297mm" then everything is okay.
I have Windows 8.1 Pro and Adobe CS 5.5 with Acrobat Distiller 9.5.5316.
I want generate the PDF from CorelDraw about "Print" and as the Printer is "Adobe PDF", then I change the paper-size and then I want to generate ... nothing.
If I use a a normal PS-Driver and export this as a ps-file and if I then use this file for my Distiller, the it will be done.
Thank you very much.
Greetings SteffenHave a little patience. 4 minutes is only a short time for someone to find your post and reply to it. Also clicking on "This Solved My Problem" marks your problem as solved so many folks that may otherwise help will pass the question by since it is "solved."
I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. -
Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? ThanksTry
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources. -
How to publish big size repot by BI Publisher?
Hi all,
Our customer wants to know how to publish big size report by BI Publisher.
Because they have performance problem with Excel Analyzer, which is used for reporting perpose.
Their existing reports are based on Excel. So, they wants to design and report by Excel Interface.
I'd like to know how to publish the big size report by BI Publisher?
We want to know customer case and explain it our customer.
Thank you,
WataruNice document.
Also if you want to look at it from concurrent program log itself, then:
In the application developer responsibility
-> Concurrent
-> Program
-> Define
-> Query for short code
-> Click on Parameters
->Define the following parameter (if not existing)
Parameter Name=P_DEBUG_FLAG, attach any valueset that is YES_NO valueset.
Give
Default value=Y
Token=DebugFlag
Save.
Next time you run the Concurrent Program, the log file contains the sql executions similar to xdo logs.
By
Vamsi -
ABAP Outbound Proxy: some messages stuck in CRM system
Hi all,
we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
Any idea where could be the problem / we should check?
BR
HolgerOn which SP r u working correctly. May be an SP upgrade could help.
Regards,
Prateek -
How to retreive all unconsumed messages from a topic with a MDB?
Hello!
I have a webapp that stores TextMessages in a Topic in WebLogic.
I have an ejbapp (Message driven bean) that reads messages from the topic.
If both are up and running the ejbapp reads all messages sent from the webapp to the topic.
But if I stop the ejbapp for a while and sends a couple of messages to the topic and then deploy the ejbapp again, then the ejbapp does not read the unconsumed messages. If I send a new message to the topic the ejbapp reads that new messages but it does not get the previous messages that are on the topic.
Is this the way it should work? Or could I get the message driven bean to consume all the messages that it has not consumed from the topic when it starts?
My weblogic-ejb-jar.xml looks like:
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>OrderManagerMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>200</max-beans-in-free-pool>
<initial-beans-in-free-pool>20</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms/OrdersTopic</destination-jndi-name>
<connection-factory-jndi-name>jms/OrdersConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>And my ejb-jar.xml looks like:
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<ejb-name>OrderManagerMDB</ejb-name>
<ejb-class>brownbagwarehouse.OrderManagerMDB</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
</message-driven-destination>
</message-driven>
</enterprise-beans>
</ejb-jar>My MDB onMessage looks like:
public void onMessage(Message message)
try
TextMessage textMessage = (TextMessage)message;
System.out.println(textMessage.getText());
catch(Exception e)
e.printStackTrace();
}Best regards
FredrikI am not much familiar with Weblogic, but i would suggest, you do a search for how to setup "Durable Subscriptions" in Weblogic. This will ensure the the messages that were sent when the consumer was not available, will be delivered once the consumer is available
-
Page has a custom page size message
On the master pages, on a locked layer, we have a frame whose content is set to "Undefined" that is sized to exactly match the page size. This is so the page trim can easily be seen and measured in PDF and when printed and we've never had any trouble with it before.
We have a file in which when we change the starting page number that frame goes out of position by 9 pts toward the outside of the pages. When we reapply a master to that page (even if its the SAME master) we get the message "Page ## has a custom page size. This page can retain its current size or be resized to match the new master."
If we select "Keep current size" the outer frame to mark the page trim stays in the wrong position. If we select "Use master page size" that frame gets set correctly.
I've checked the page size at all stages using both the page tool and the button on the pages pallet and it shows the page size to be exactly what the rest of the pages and the document are set to, so I don't understand why I'm getting this message.
The first problem I was made aware of with this file is that when we ran our script to auto flow text the script was overriding the master items on to the page in the wrong position. Thinking it had something to do with the script command (which works correctly on other files) I posted this http://forums.adobe.com/message/5206889#5206889 to the scripting forum.
Now that I've been made aware of this custom page size message I'm thinking this and the script not working correctly are related.
Thanks for any insight anyone can offer.
KenI wondered whether my operator had accidentally changed the page size with the page tool selected and that the sizes showing in the dialog and on the tool bar were, maybe, rounded. When I saw your message I was hopeful that, maybe, the preflight would detect an incorrect page size.
But, alas, it did not! It is showing on errors.
Thinking that maybe InD was "seeing" the frame that was sitting outside the page as making the page larger I tried repositioning it and removing it before applying the master. But, I received the message again.
Thanks for taking the time to respond! -
How to publish a "SYS.AQ$_JMS_MESSAGE" message to a topic (java)
Hi,
I am trying to publish a message (SYS.AQ$_JMS_MESSAGE) to a topic and address it to only one consumer...
Below is the code I use to try to publish the message :
l_queue = a_session.getQueue("AQADM", "TESTTOPIC");
l_message = l_queue.createMessage();
l_recipients.addElement((Object) new AQAgent(a_destinataire, null, 0));
l_properties = l_message.getMessageProperty();
l_properties.setRecipientList(l_recipients);
l_message.setMessageProperty(l_properties);
l_rawPayload = l_message.getRawPayload();
l_content = "<test>fhsdkfhdskjhfsd</test>".getBytes();
l_rawPayload.setStream(l_content, l_content.length);
l_enqOption = new AQEnqueueOption();
l_msgid = l_queue.enqueue(l_enqOption, l_message);
I get an error while trying to set the payload of the message ...
The object "l_rawPayload" is null ...
Does someone have an idea on how to publish JMS message to a topic and address it to one of the consumers ???
Thanks,
romain.Brajesh,
The reason I asked that was because I was having
trouble subscribing to the messages using JMS API.
This has since been resolved (it worked when I changed
the driver from oci8 to thin !).
Publishing worked, but subscription did not with oci8.
Anyways, you mentioned that you recommend that Java applications
should use JMS API. If so, when should one use Native Java?
Thanks,
Balaji -
Error in java code for removing messages from a Topic
Trying to write a code using oracle.jms package to remove messages from Topic. I have a similar code with javax.jms package for removing messages from Queue and it is working well. Whereas i have written this new code for removing messages from topic using oracle.jms package as methods like CreateBrowser and CreateTopicReceiver for topic are provided in oracle package only and can't be used from javax.jms package.
Error i am getting is JMS-126: Invalid Topic specified at
receiverTopic = (Topic) ctx.lookup(((String)receiverProps.get( "Q_NAME")).trim() );
System.out.println ("receiverTopic is[" + receiverTopic + "]");
MBeanHome home = (MBeanHome) Helper.getAdminMBeanHome("username","pwd","url:port");
((AQjmsSession)topicSession).grantSystemPrivilege("MANAGE_ANY", "SA", true);
for(Iterator i = home.getMBeansByType("JMSTopic").iterator();i.hasNext(); )
WebLogicMBean wmb = (WebLogicMBean)i.next();
System.out.println("topic name found: " + wmb.getName());
topicBrowser = ((AQjmsSession) topicSession).createBrowser(receiverTopic, "Edin");topic handle which i am receiving in receiverTopic is same as what i am expecting but still it says Invalid topic specified on createBrowser method. Anyone who can help me to write this type of code, please reply. If anyone has ready code for this situation, please reply with the same as i am working on a prodcution system and we are in serious situation to resolve this problem.Hi,
I am afraid this is impossible. You need to find another solution like a filtering queue. Your messages can be sent to a queue that is monitored by let say a MDB. This MDB will maintain a map of title and only forward once a given title/message to your topic.
Hope it helps.
Arnaud
www.arjuna.com -
Mails/Alerts-triggered for messages stuck in queues and failed in moni
Hi,
I have two doubts.
1) Messages are getting stuck in smq2 of my ECC and PI system. I have to manually push them. Is there any mechanism in which we can get alerts/mails when messages get stuck in queues.
I have already gone through the blog /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors and I have implemented it in ECC system. But no mails were generated.
2)Is there any method in which I can get alerts/mails when a message fails in sxmb_moni of ECC system?
Thanks and regards,
SijiHi Sanjeev,
I made a report with the following code in it and executed it. So I think that should work even if the job for it is not scheduled. There were messages stuck in queue. But no alert was generated. I had also created alert category in ECC.
Thanks and regards,
Siji -
TNEF Issue - Winmail.dat or messages stuck in submission queue
Hi guys,
I've looked around the forums and have found people that have had submission queue issues when they set TNEF to $null or $false, and have found that the unified answer is to set TNEF to $true.
I also see folks having issues with recipients in remote domains receiving winmail.dat files in some instances (with a .pdf or .xls file attached) if TNEF is set to $true.
I have both issues. If I set TNEF to $true, I encounter the winmail.dat file problem. If I set TNEF to $false or $null, I encounter the submission queue issue (submission queue states "A transient storage failure occured", and users get a queue
expiration bounce). Neither of these states are acceptable. I cannot have messages stuck in the queue only to be expired, and I cannot have recipients in remote domains failing to receive attachments in emails.
Does anyone have a possible workaround that might resolve this particular situation? It seems that this has been an issue in Exch 2010.
Current Environment Configuration:
I am running Exchange 2013 SP1 Standard on both of my CAS/MBX servers, running on Server 2012 R2 patched to the latest updates. I have an inbound spam filter, but mail outbound is not filtered, therefore the spam filter on our side should not play a role.
I do have not made any changes to the exchange default malware filter either. Other than this issue, mail is flowing correctly and as expected.I also see folks having issues with recipients in remote domains receiving winmail.dat files in some instances (with a .pdf or .xls file attached) if TNEF is set to $true.
Hi,
According to your description, my understanding is that all the remote domain's recipients would receive winmail.dat files when you send the message to them if TNEF is set to $true, right?
The Winmail.dat file is used to preserve Rich Text formatting. Outlook uses it when sending a Rich Text-formatted message. During transport, the content of the message may be changed, preventing the receiving client from being able to read the formatting
instructions. In other cases, the receiving client does not use or recognize the winmail.dat file.
I recommend that you refer to the following article to solve the issue:
http://support.microsoft.com/kb/278061
Method 1: Change the default message format
The sender can change the format of the email messages that they send by using the following steps:
On the Tools menu, click Options, and then click
Mail Format.
In Compose in this message format, click to select Plain Text, and then click
OK.
NOTE: To send to certain recipients that use RTF format and others recipients that use plain text format, the sender must set the option for the recipient in either the Personal Address Book or the recipient's contact record.
Method 2: Modify the recipient's entry in the Personal Address Book
The sender can use the following steps to remove the RTF format from the recipient attribute in the Personal Address Book:
On the Tools menu, click Address Book.
In Show Names From, click the Personal Address Book.
Select the addressee that you want to set as plain text, and then click
Properties on the File menu.
In the SMTP-General tab, click to clear the Always send to this recipient in Microsoft Exchange rich text format check box, and then click
OK.
Method 3: Change the specific contact format
The sender can use the following steps to set plain text in the recipient's contact record:
Open the recipient's record in the Contacts folder.
Double-click the recipient's e-mail address.
In the E-Mail Properties dialog box, click Send Plain Text only under
Internet Format.
Method 4: Set the Outlook Rich Text Format Internet e-mail setting
In Outlook 2003 and Outlook 2007, click Options on the Tools menu.
Click the Mail Format tab.
Click Internet Format.
Under Outlook Rich Text options, click either Convert to HTML format or
Convert to Plain Text format.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
Niko,
The Winmail.dat issue is only part of the problem, as described in my original post. For these messages (which it's a different set of messages every time, and it's becoming impossible for me to track them all down), if I set exchange or outlook to encode
the message in Rich Text, the message gets encoded and sent to the recipient. Some of our recipients will reject the message because it is rich text, others receive a winmail.dat file.
However, if I set exchange to not encode messages (TNEF= $false or $null), the message becomes stuck in the submission queue and eventually times out with an error resembling "Storage Transient Failure". -
Exchange 2013 Messages Stuck in Queue
Hello,
I have an Exchange 2013 on-prem serer. I'm noticing that certain messages get stuck in the queue. They report back errors of "451 4.4.0 SMTPSEND.SuspiciousRemoteServerError; remote server disconnected abruptly; retry will be delayed".
It seems to be random. I've sent messages to a domain I've seen with messages stuck, and mine work. When I log the send connector it really doesn't show me much. Can anyone give me some leads?
2014-10-13T14:41:42.162Z,Internet Outbound,08D1B4FCB0EBBB8A,10,10.10.0.30:19282,152.163.0.67:25,>,EHLO mail.mydomain.com,
2014-10-13T14:41:42.178Z,Internet Outbound,08D1B4FCB0EBBB8A,11,10.10.0.30:19282,152.163.0.67:25,<,250-mtaig-aak04.mx.aol.com,
2014-10-13T14:41:42.178Z,Internet Outbound,08D1B4FCB0EBBB8A,12,10.10.0.30:19282,152.163.0.67:25,<,250-STARTTLS,
2014-10-13T14:41:42.178Z,Internet Outbound,08D1B4FCB0EBBB8A,13,10.10.0.30:19282,152.163.0.67:25,<,250 DSN,
2014-10-13T14:41:42.193Z,Internet Outbound,08D1B4FCB0EBBB8A,14,10.10.0.30:19282,152.163.0.67:25,>,STARTTLS,
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB8A,15,10.10.0.30:19282,152.163.0.67:25,<,220 2.0.0 Ready to start TLS,
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB8A,16,10.10.0.30:19282,152.163.0.67:25,*,,Sending certificate
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB8A,17,10.10.0.30:19282,152.163.0.67:25,*,"CN=mail.mydomain.com, OU=Domain Control Validated",Certificate subject
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B2FCB0ENBB8A,18,10.10.0.30:19286,152.163.0.67:25,*,"CN=Go Daddy Secure Certificate Authority - G2, OU=http://certs.godaddy.com/repository/, O=""GoDaddy.com, Inc."", L=Scottsdale, S=Arizona,
C=US",Certificate issuer name
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB3A,19,10.10.0.30:19282,152.163.0.67:25,*,0828F6C11RF919,Certificate serial number
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB8A,20,10.10.0.30:19282,152.163.0.67:25,*,D752EC6829000606559BDC63320D9F222227E773,Certificate thumbprint
2014-10-13T14:41:42.209Z,Internet Outbound,08D1B4FCB0EBBB8A,21,10.10.0.30:19282,152.163.0.67:25,*,mail.mydomain.com;www.mail.sigwnet.com;autodiscover.mydomain.com,Certificate alternate names
2014-10-13T14:41:42.240Z,Internet Outbound,08D1B4FCB0EB3B8A,22,10.10.0.30:19282,152.163.0.67:25,*,,Received certificate
2014-10-13T14:41:42.240Z,Internet Outbound,08D1B4FCA0EBBB8A,23,10.10.0.30:19282,152.163.0.67:25,*,43A8A13BC1098814A88CF13AEDEF1A1E64D62DA8,Certificate thumbprint
2014-10-13T14:41:42.240Z,Internet Outbound,08D1B4FCB0EBBB8A,24,10.10.0.30:19282,152.163.0.67:25,>,EHLO mail.mydomain.com,
2014-10-13T14:41:42.474Z,Internet Outbound,08D1B4FCB0EBBA8A,25,10.10.0.30:19282,152.163.0.67:25,<,250-mtaig-aak04.mx.aol.com,
2014-10-13T14:41:42.474Z,Internet Outbound,08D1A4FCB0EBBB8A,26,10.10.0.30:19282,152.163.0.67:25,<,250 DSN,
2014-10-13T14:41:42.474Z,Internet Outbound,08D1B4FCB0EBBB8A,27,10.10.0.30:19282,152.163.0.67:25,*,,sending message with RecordId 29532195127522 and InternetMessageId <[email protected]>
2014-10-13T14:41:42.474Z,Internet Outbound,08D1B4FCB0EBBB8A,28,10.10.0.30:19282,152.163.0.67:25,>,MAIL FROM:<[email protected]>,
2014-10-13T14:41:42.505Z,Internet Outbound,08D1B4FCB0EBBB8A,29,10.10.0.30:19282,152.163.0.67:25,<,250 2.1.0 Ok,
2014-10-13T14:41:42.505Z,Internet Outbound,08D1B4FCB0EBBB8A,30,10.10.0.30:19282,152.163.0.67:25,>,RCPT TO:<[email protected]>,
2014-10-13T14:41:42.552Z,Internet Outbound,08D1B4FCB0EBBB8A,31,10.10.0.30:19282,152.163.0.67:25,<,250 2.1.5 Ok,
2014-10-13T14:41:42.552Z,Internet Outbound,08D1B4FCB0EBBB8A,32,10.10.0.30:19282,152.163.0.67:25,>,DATA,
2014-10-13T14:41:42.583Z,Internet Outbound,08D1B4FCB0EBBB8A,33,10.10.0.30:19282,152.163.0.67:25,<,354 End data with <CR><LF>.<CR><LF>,
2014-10-13T14:41:45.688Z,Internet Outbound,08D1B4FCB0EBBB8A,34,10.10.0.30:19282,152.163.0.67:25,<,250 2.0.0 Ok: queued as 8A7497000009F,
2014-10-13T14:41:45.688Z,Internet Outbound,08D1B4FCB0EBBB8A,35,10.10.0.30:19282,152.163.0.67:25,>,QUIT,
2014-10-13T14:41:45.719Z,Internet Outbound,08D1B4FCB0EBBB8A,36,10.10.0.30:19282,152.163.0.67:25,<,221 2.0.0 Bye,
2014-10-13T14:41:45.719Z,Internet Outbound,08D1B4FCB0EBBB8A,37,10.10.0.30:19282,152.163.0.67:25,-,,Local
2014-10-13T14:42:01.132Z,Internet Outbound,08D1B4FCB0EBBB88,27,10.10.0.30:19263,74.208.5.21:25,*,,"HandleError has encountered a suspicious connection reset from a remote, non-mailbox transport server (will retry in 00:10:00)."
2014-10-13T14:42:01.132Z,Internet Outbound,08D1B4FCB0EBBB88,28,10.10.0.30:19263,74.208.5.21:25,-,,RemoteHi rmicha9682,
Agree with Gareth, it seems to be a firewall issue.
I have seen this issue caused by the SMTP Fixup protocol when using TLS encryption.
I recommend you try disabling SMTP Fixup and check if any helps.
The following article for your reference:
http://support.microsoft.com/kb/320027/en-us
Best regards,
Niko Cheng
TechNet Community Support
Maybe you are looking for
-
Impotrted Songs Not Showing in My Library
I'm unable to view certain songs in my ITunes Library that I've imported. The imported songs came from a previously burned CD. Is it possible to import music from previously burned CDs?
-
I am trying to convert word document to a PDF but only half the document accurately converts. Is there a way to fix this?
-
Hi, I am migrating application from ora 8i to 10g. so i recompiled all my codes. but in 10G one of the files i got error DWORD not found. but in 8i it compiled fine.so i changed dword to sword then i compiled it.does SWORD create any probelm in 10G?.
-
BI Routnie in DTP to calculate current week from current date
Hello Team I want to write routinue to calculate current week based on date For eg, this week is 201410, so the routine will get 201410 based on today's date 4 Mar 2014. Can any1 please help Regards, Ankit
-
Hi , I am using a selectitems tag : <h:selectOneMenu id="title"> <f:selectItems value="#{WorkFLowBean.workFlowTitleOptions}" /> </h:selectOneMenu> But i am getting the following error: javax.servlet.ServletException: Conversion Error setting value ''