Big Trouble, Little nano

Hi...can anyone help me?
A friend in another country, liked my iPod nano so much....I got him one, and was going to load it for him, as he may have problems finding a computer to do the job at his location.
The installation disc wouldn't run, because I already have the software for my own nano on this computer.
I thought maybe it would load with the software already on the computer.....and plugged the new nano in.
Now it won't let me disconnect it, and I'm afraid to ruin it by puling the plug.
The Safely Remove Hardware option, keeps telling me it cannot be stopped.
What do I do?
Custom   Windows XP  

See this...
How to Safely Disconnect
btabz

Similar Messages

  • Big library, little nano

    I need to learn the best, step-by-step way to update my 2 GB nano from my library, which is more than 2 GB. Please let me know what my preferences should be set at and how to deal w/ the playlist that's created that says my name and nano. And I don't want to accept the songs that iTunes selects to update (it offers to select my playlist). Please help me figure out the best way to do this. thanks.
      Windows XP  

    The most convenient way to deal with a library that is larger than your iPod is to sync the iPod to a specific playlist.
    1) create a new playlist in iTunes - call it iPod (any name will work)
    2) connect the iPod and open the iPod preferences
    3) in the iPod preferences select the option 'Sync selected playlists only'
    4) in the dialog box, just below that option you'll see, a list of all your playlists. Select iPod and close the preferences dialog box
    5) begin dragging songs from your iTunes library into the iPod playlist. Watch at the bottom of the iTunes - iTunes will tell you how much space that playlist is taking up. You should be able to put in about 1.8 GB of songs.
    6) once you've filled your playlist, sync the iPod.
    Note: you can create more than one playlist for your iPod - say one for morning trip (calmer music) and one for evening trip (louder music) - and choose to sync all of those playlists to the iPod. Also, once the sync is complete, click on the iPod icon in the iTunes list and see how much space you have left. You might be able to squeeze in a couple songs more. Finally, if you get the error message that the playlist is too large, you can remove a couple songs. Also, take a look at the smart playlists. I always create a small playlist of songs I've never listened too and/or songs I've not listened too for a long time. Helps me mix things up a little so my iPod doesn't simply become a top 40's toy.

  • I think I'm in big trouble now - CFReport

    Hi all,
    My client asked for some nicer reports that don't look so "excel-ish", specifically they wanted to see some nice looking 3D charts along with their data in a PDF format.
    So, I worked on trying to create some nice mockup charts using the CFChart command, which I haven't used in a few years. I discovered the whole WebCharts3D series of charts, and was fairly impressed with the flexibility it had. So, I created an HTML page with my data and my new charts, and used CFDocument to make them a PDF. They looked great! Nice gradients on the backgrounds, my client's logo at the top of each chart, pie charts that jump out of the page at you... I got more than a few "wow's".
    Then, I had to do it for real, and quickly saw that using CFDocument does not allow you to print page headers and footers when the report is more than a page long. I played for quite a while with google searches and CSS tricks to get it to happen, but it just isn't there yet - you can't get multiple footers to print (although you can get multiple headers - but it's hokey). Not to mention problems of the page break cutting off a line of text (maybe solvable, but at what cost? hours more of my time). So, I gave up using the CFDocument tag for our reports.
    Then I tried the CF Report Builder. I have had some teething issues, but have been able to get a basic report at least, complete with my client's logo and watermark, and a pie chart. However, the pie chart looks terrible compared to the slick WebCharts3D pie chart that I did before. Plus, I haven't been able to get a bar chart work off of a passed in query yet, but I could probably get through that on my own.
    To my question. Can you use a Webcharts3D chart in a CFReport? or, in other words, can you use CFChart in a CFReport?
    If I cannot, I think I'm in big trouble, as the client thinks I can create these nice charts in a slew of new reports they want me to write... and I'll have to tell them that it's not possible? After I've already shown them what CFDocument can do?
    Thanks in advance...
    Swift

    Unfortunately, the file is probably gone.
    If it is retrievable, you will need to go directly into the drive. This means that the drive must be pulled from the Time Capsule and placed in an enclosure, just to see if the software program can retrieve the information. That's a big "IF".
    I haven't tried this, (pulling the drive will void the warranty on the Time Capsule), so I can't predict what your chances of success may be. Perhaps some other users could help in this regard.

  • I'm having big trouble with my new mainboard: Part II

    Hi  
    I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
    -Krelian

    Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to  cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

  • HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

    Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou    and tell me about its solution
    <Email Edited by Host>

    Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new.  Try each of these in order until the problem is resolved.  If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation.  Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
    Best
    GDG

  • LOst my Adobe Download Manager - big trouble

    I'm having big troubles.
    I tried to upload to the newest Reader, but I was in Firefox AND IT COMPLETELY MESSED UP THE DOWNLOAD.
    The more I tried to fix it, the more messed up it became.
    Now I lost the Download Manager and can't get ANYTHING to download to my computer -- let alone fix this mess.
    Any advice anyone?
    Thanks,
    K.

    Thank you Pat,
    The Windows Installer downloaded and installed without problem.
    In it, I have nothing about Adobe Reader or Adobe Download manager.
    I do , however, have:
    Acrobat.com
    Adobe AIR
    Adobe Media Player
    When I tried to launch
    http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.1/enu/AdbeRdr910_en_US.exe,
    I got the following error message (without the quotation marks):
    "C:\DOCUME1\owner\LOCALS1\Temp\DMkBq8sP.exe.part could not be saved,
    because the source file could not be read.
    Try again later, or contact the server administrator."
    I did not, of course attempt Step 3.
    Any more suggestions? Should I remove the three I mentioned above?

  • I am having big troubles by sending emails - not receive them

    I am having big troubles by sending emails! I can receive them, but as soon as I want to send an email myself, then it 1) says that the email is too big, or 2) says that my password is wrong, or 3) says that the server is out of function. Anyone knows how to solve this problem?

    Mail (Mountain Lion): Solve Mail problems

  • Big trouble installing MS Access App - WIN7

    Hello, everybody! (LET ME STRESS THAT, I STILL CAN INSTALL IT 'EVERYWHERE', NO PROBLEM. THAT'S HAPPENING JUST TO MY CLIENT. MAYBE I DIDN'T MAKE THAT CLEAR ENOUGH, SORRY FOR THE CAPS)
    Well, I'm having a big trouble when trying to install access app, and that's just unbelieveable! I would like to share it with You, expert fellows, and ask for some help, if You don't mind.
    Technically, my client is having a problem,  not me, not at all! And here's the scenario :
    1. Application runs on AccessRuntime 2010
    2. FE accdr(from compiled accde) and BE accdb
    3. I use InnoSetup to copy the files, run the additional softwares, all 'Trusted Location' settings are created, it's just perfect.
    4. It was installing OK a couple of days ago(just accdr from accdb)
    5. I was able to install it anywhere, I don't see anything wrong(Win8,Win7, i bet it would even work on XP)
    6. It was running a couple of days ago until i added the compiled accde->accdr instead of accdb->accdr to the setup, that was the only update applied to  current Setup program, and I bet that's what's happening, don't
    know why, or how, since it's fine for me, works just the same. Tricky, specially because i don't see s**t, and in fact, nothing works, it's just amazing!
    7. The bug : After installed, error messages : 
    *1 'the expression you entered has a function name that "app name" can't find'
    *2 Some window to stop macros :
    *3 '"app name" cannot run the macro or callback function "Callbackonload" make sure the macro or function exists and takes the correct parameters (Callbackonload Loads ribbons settings,
    with icons, all that thing. Never had any trouble with it, not even when i started working with that ribbon stuff)
    *4 and again, error report on  'popup' windows:
    Now, I wouldn't like to install a non-compiled file, rather to contour the bug, if that's the reason for it as it seems.
    Specially because this individual, thinks he's part of development team, and is always giving 'contributions' on how to test, how to track bugs, or allegedly bugs or how things work, etc, because he's been a developer 100 years ago, and something, and it will
    not take long for him to start messing things around, besides the fact he bought an application only, not source code.  
    Anyway, I'm having a bit of a hard time finding a way out of this, and simply don't know how to proceed, so if anybody would kindly share one's knowledge with me and help me out on this subject, I would appreciate a lot, as usually!
    Thanks everybody, and excuse me, if that's a clumsy question!

    Actually, the scenario you outline includes the “golden ring” information as to the problem. (as a result – your post is VERY good since you included details as to WHEN the application works, and when it does not! – well done on your part!!!).
    You CAREFULLY note that when you distribute a NON compiled (accDB) then your application works.
    You CAREFULLY note that when you distribute a compiled application (accDE), then it does NOT work. For the people reading this post – this is the above “golden ring” information that explains what is going on.
    In NEAR ALL cases the above means that the target computer has a DIFFERENT version of Access. And when I say “different” version that INCLUDES Access with a DIFFERENT SP update level!
    With Access 2010 (full edition), the SP updates are rolled out automatic by windows update. With the Access runtime, such SP updates are NOT rolled out.
    This means the customer machine (client) is running a DIFFERENT version of Access. When you supply an accDB, then Access can (and WILL) detect that the VBA code needs to be re-compiled.
    WHEN you distribute an accDE, then then VBA source code is NOT available. And of course the target computer is running a different version of Access (and as noted “different” INCLUDES when talking about SAME version of office but DIFFERENT SP update levels).
    The end result is you need to compile the accDE on the SAME SP revision level that the customer is using. They are VERY likely installing 2010 runtime, but NOT installing the SP2 update to access runtime. MOST important here is installing the office SP2
    update on that target will NOT update the Access runtime!
    As a side note, for Access 2013, the download DOES include the SP updates, but 2010 does NOT!
    I thus suggest they download + install the Access runtime SP2 update. Remember, SPECIFIC they must run the Access 2010 runtime SP2 update – the office 2010 SP update is NOT sufficient.
    So the “BIG HINT” here is that WHEN you include source code, your application runs fine. When you DO NOT include source code (accDE), then the application fails on the target computer. And this is a GREAT lesson for people posting – since they now know and
    realize the above issue.
    So the “big” hint is WHEN code can not re-compile your application breaks. This is due to the SP level on your development machine being different then the Access SP update level on the target computer.
    The above problem is exasperated by the OFTEN occurring issue that your development machine will receive the office update via windows update automatic, and the runtime does not.
    However I give you a BIG THUMBS up, since you INCLUDED the VERY IMPORTANT detail that an accDB runs, but the accDE does not!
    So the accDB includes source code and will “automatic” re-compile on the customers machine – the accDE does not do this and in fact cannot due to no source code being included.
    And I should point out that this automatic VBA re-compile even occurs if the customer has runtime only installed.
    So VERY important here is when distribution compiled code, you must ensure that the target computer MATCHES your SP update level that you used to develop the application.
    And, do post back to verify the above issue - I have a VERY high confidence the above is your issue, since I seen it a zillion times in the last year!
    Regards,
    Albert D. Kallal (Access MVP)
    Edmonton, Alberta Canad

  • I had big trouble yesterday downloading Mavericks

    I had big trouble yesterday downloading Mavericks to a Mid 2012 15" MacBookPro.  Ended up a no-start mode upon auto restart and eventually had to revert to "Command R" restart and reinstall Mountain Lion.  Anybody else have this problem on Day One?

    See:
    *http://kb.mozillazine.org/Resetting_preferences
    You can use "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.

  • Help: Any one can advice, CVI software is using Big or little endian?

    Help: Any one can advice, CVI is using Big or little endian? 
    or is depend on the processors my HW is using?

    The correct answer it the third one: CVI adapts to the hardware architecture you are running on. In the Programmer's Toolbox you have functions to detect the hardware architecture: HostIsBigEndian and HostIsLittleEndian. In the group you have functions to convert data between architectures.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • HT1918 hi there. I have a problem edit my card info. I would like change my payment debit cart but system don`t let me do this and I don`t know wy . it is big trouble because I had chenge my bank and account too so I need change my payment details but I c

    hi there. I have a problem edit my card info. I would like change my payment debit cart but system don`t let me do this and I don`t know wy . it is big trouble because I had chenge my bank and account too so I need change my payment details but I can`t. thank you  

    Follow this link for the Bionic ICS user guide; if you have issues/questions, you may want to do a search on this forum as there are already several threads/remedies.  If a search doesn't answer your question, submit a post.
    https://community.verizonwireless.com/message/893011#893011

  • Big to Little Endian

    http://download.oracle.com/docs/cd/B14117_01/server.101/b10770/rcmsynta18.htm#87809
    DB Version : 10.1
    We are going across platform, different endianness.
    1. We cannot use CONVERT Database as it is supported only across same platform.
    2. We are planning to use CONVERT Datafile, without transportable tablespace.
    3. Any idea on how much time it would take to copy a 10g File ?
    When there is a endian difference, could you please provide a high level successful methodology to use.
    We are planning to do an OS cold backup, subsequent restore of the entire database on Target, run convert datafile and synchronizing the data from there on. BTw, we are going from Big to Little Endian.
    Can any one provide a estimate on how much time it would take to convert a 10 Gig datafile?
    Also once datafile is converted and brought up, can we apply the archivelog’s I am thinking no, but wanted to know your opinion.
    Edited by: user11986212 on Nov 30, 2009 8:13 PM

    Hi,
    I wrote blog post recently about cross platform migration from big to little endian platform:
    [Cross-platform migration - large Oracle 9i db from Solaris 64 to Linux 64|http://msutic.blogspot.com/2009/11/cross-platform-migration-large-oracle.html]
    First part is upgrade process and you can ignore that part - next is migration across platforms.
    Maybe this post could be helpful for you.
    Regards,
    Marko

  • Big trouble when changing graphics card on Envy desktop.

    My Envy H8-1419 uses the Eyefinity Radeon HD 7570 card. I want to use a Zotac GeForce GTX 650 Ti card (double slot). The card fits physically without difficulty but there is no display on boot (machine beeps, monitor says "no signal"). Desktop seems to meet all requirements re power and system specs. Does something in BIOS need to be reset? Anything else?
    This question was solved.
    View Solution.

    Hi:
    You have to change two BIOS settings on your PC when you plan to install a non-HP video card.
    After you read the below info, hopefully your current big trouble will only be a distant memory.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...

  • Big trouble moving Archived Canon 5D/7D footage.

    Hi All,
    here i'm with big trouble batch capturing an huge quantity of footage.
    Here the worklow:
    All the footage has been log and trasfered in ProRes Proxy.
    At end of editing, I'd like to take all the clip in Prores HQ.
    I've created an offline version and the moved to another system.
    Here the troubles. Many of the cards are not readable and even when I read it, Final cut
    tell me that nothing is ready. The incredible thing is that if I do the same thing on the original system
    it works great! Any idea is very well Accepted! Please help me!
    Many thanks in advance! Best Regards
    Paul

    If you transcoded to ProRes you shouldn't be waiting hours for an export.  Unless your timeline is hours in duration.  As you're working at a post house you probably know all of this, but here are a couple of tips I can think of right now that could speed things up:
    1) Only one frame rate on a timeline.
    2) Minimize the number of filters on a clip.
    3) Export to a drive that is not the drive your media is on.  Perhaps you have a media drive and a completed projects drive.  Of course both should be internal SATA, eSATA, Firewire, Lightpeak, or perhaps a proprietary connection to a RAID card.  No USB.  If you aren't needing to have a lot of data on your media drive or your export drive consider a faster (but smaller) solid state drive.
    4) Use the Batch Export function.  Queue everything up and have Final Cut exporting a few sequences during lunch or when you leave at night.
    5) Make sure autorender is on.  Leave Final Cut open at night and it will autorender all open sequences.  If you have several filters on your clips the computer will work on it overnight and you'll come in to a rendered sequence that should export very quickly.

  • Big trouble about my order

    hi folks
    i have a big trouble about my order don't have any serial number so what's going on ?
    We received your payment - thank you! Here are the details about that order for your records:
    Order Details:
    Creative Cloud single-app membership for Adobe Premiere Pro (one-year) US$19.99 per month
    Order # AD015556514 US$2.99 tax
    Total payment today:   US$22.98
    thx

    We are not Adobe. This is a user to user forum.  We are consumers just like you.
    You will need to contact Adobe:
    https://www.google.com/search?q=contact+Adobe&oq=contact+Adobe&aqs=chrome..69i57j69i65j69i 60l3j69i59&sourceid=chrome&es_…

Maybe you are looking for