Big trouble: Tried to do 2 partitions now I can't install OSX.
I had this happen once before on my G5 and it was fixed by rebooting and trying again. Not this time.
I wanted 2 partitions on my new MacBook so I decided to reinstall before I got a whole lot of software on it.
After making both partitions Mac OS Extended (Journaled) and clicking partition I tried to finish setup but both partitions say they can't have OSX installed on them!
I restarted, booted to the CD again, repartitioned back to a single Partition, same problem.
Next I repartitioned again and tried to Zero out the disk, (getting desparate at this point) 45min later. No luck!
HELP!
The problem is the type of partition that you have created.
You are going to need to repartition the disk again. To do this boot from your OS X disk and use disk utility (it is under the "Utilities" menu (i think there is a menu with disk utility for sure.)
Once you have Disk Utility Running go into the partition menu and select options. You need to use the GUID Parition Table to allow you to install OS X on an Intel map. After that then repartition and you should be able to install.
Similar Messages
-
I clean my disk totally by disk utility and now nothing comes up when holding option key. After a while this text comes with a black background, "No Bootable Device -- insert boot disk and press any key".
I think I erase everything, even boot settings!!!
Now, How can i install OSX now on my iMac?What is the exact iMac model you have, please? If your model can run Snow Leopard then you need to install Snow Leopard from your installer discs. Snow Leopard must then be upgraded to 10.6.8 so you can upgrade to the version of OS X you had installed from the App Store.
-
I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.
What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
Cheers, Tom -
my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account i reset my phone but i did it before on my new phone but this old is link to a account that i set up when i was so much younger can you advise what to do?
ThanksGo into Settings App and turn OFF Find My iPhone. It will ask for your old password, but in the future you can use your new Apple ID account. If you need to reset the old password try this: https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
-
I tried adding mobile accessibility and now i can't unlock my phone. Can anyone help?
I tried adding mobile accessibility and now i can't unlock my phone. Can anyone help?
From
http://www.windowsphone.com/en-GB/how-to/wp8/basics/accessibility-on-my-phone
Tap Restart phone.
After your has phone restarted, a message about the lock screen will be read aloud. Tap the lock screen at any time to hear the time, date and notifications read aloud. To unlock your phone, flick the screen up. (If you have a password, tap any number key to hear that number read aloud, then double-tap to enter the number as part of your password.)
If this is the first time you've turned on Mobile Accessibility, you'll be presented with a training session to help you quickly learn how to use it. (You can return to the training at any time by triple-tapping the screen to access the Quick Menu, then selecting Support > Touch Training.) Otherwise, the Mobile Accessibility home screen will load.
Worse case a hard reset will clear it (you will of course erase the phone)
http://support.verizonwireless.com/support/devices/knowledge_base.html/66350/ -
I was trying to update my imac now i can't do anything
i was trying to update my imac now i can't do anything
If you'll look at the little toolbar above the reply window, you will see an 'A' to the left of the little smiley face. So, if you want to post a link to another site or thread here, first copy that URL (have your cursor in the address bar of that site and hit Command + C to copy. Then come back to your reply window, click on the A and you'll get a window in which you can simply hit Command + V (pasting the URL there) - hit insert and you'll see this:
https://discussions.apple.com/thread/4139771?start=75&tstart=0 -
I just upgraded to 10.7.3 and now I can't install any applications.
I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
Any hints?I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
Step 1 results
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.ips (3.2f8)
com.cisco.nke.ipsec (2.0.1)
com.symantec.kext.SymAPComm (11.1.2f17)
Step 2 results
org.macosforge.xquartz.privileged_startx
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.avscandaemon
com.micromat.TechToolProDaemon
com.google.keystone.daemon
com.bombich.ccc
Step 3 result
org.macosforge.xquartz.startx
com.symantec.uiagent.application
com.prosofteng.DGMonitor
com.micromat.TechToolProAgent
com.google.keystone.root.agent
com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
com.ecamm.printopia
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
Step 4 result
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Frameworks
NyxAudioAnalysis.framework
PluginManager.framework
R.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.google.keystone.agent.plist
com.micromat.TechToolProAgent.plist
com.prosofteng.DGMonitor.plist
com.symantec.uiagent.application.plist
org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.micromat.TechToolProDaemon.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.avscandaemon.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
org.macosforge.xquartz.privileged_startx.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
TechTool Protection.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymDaemon.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
WebEx.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
com.ecamm.printopia.plist
com.google.Chrome.framework.plist
Library/PreferencePanes:
Printopia.prefPane
Step 5 result
AdobeResourceSynchronizer, iTunesHelper, Air Video Server -
I recently updated my iPhone 4s to the iOS 6. Now I can not install application updates, my music library has vanished, iTunes Match (in Settings) keeps setting itself to "Off". I have also logged off of iTunes in Settings, and it will not let me log back in. Just a few moments ago when I again tried to log into iTunes, it asked me for my Password, then replyed that I had no Match account; but I do. Is Restore the best option?
Any suggestionsI couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.
Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion. -
I bought mountain lion, made a bootable flash drive.
I booted from it and it went to upgrading right away!
So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
and there is no 4 choices window.
I don't know what to do.How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion. -
I have problems in the Safari browser , and I have deleted the program using the "Clean My Mac" App and now I can not install it , he say " This update requires mac ox 10.6 "
I would like to install the Safari browser on my system Lion os x 10.7.1 …..Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
I have installed Itunes on my pc home (Windows Vista). Then i buy an app, but now i can't install it on on my ipad (with USB). What i have to do? thanks
1. Right-click on device
2. Transfer Purchases -
I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?
Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I deleted Scramble with friends from my iPod Touch. Now I can't install it again. What do I need to do?
That app is made for the iPhone - the app will work on the iPad but is not specifically designed to take advantage of the larger screen.
When searching for an app, look at the top of the screen for a button that says iPhone Apps. Tap on it to switch to apps meant for iPhone and Scramble with Friends should show up.
~Lyssa -
can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version
Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
Cheers, Tom
Maybe you are looking for
-
Can I move a game from my ipad to my iphone and maintain the level? Thanks
-
Itunes freezes when ipod is connected to computer
Whenever I try to connect my ipod to my laptop my itunes will freeze up. I try opening my ipod using "my computer" but then that will freeze up as well. I'm trying to restore my ipod to see if that will help, but since my itunes freezes, it can't det
-
Can I update a 1G with a 30gb+ hard-drive?
Hi, I currently own a 4G 20gb iPod, and now I need to upgrade for size. I'm really, really into getting a 1st Gen, but obviously, they didn't even come in 20gb, let alone 30 or more. But if I bought a new 40gb or 60gb drive online (off of spare parts
-
Issues with Query Caching in MII
Hi All, I am facing a strange problem with Query caching in MII query. Have created one xacute query and set cache duration 30 sec. The associated BLS with the query retrieves data from SAP system. In the web page this value is populated by executing
-
No Window in Widget Browser or Adobe Help on Mac, solved
I had trouble installing Air, got that solved, then found Widget Browser and Adobe Help would seem to start, but never show a window, and they'd "quit unexpectedly" when quitting. Noted that, when logging into a different account, the applications wo