Big trouble with DENON DN-X1700 USB mixer/soundcard - CoreAudio bugs like in OS X 10.5.7

Hello,
I am using a DENON DN-X1700 mixer w/ USB 2.0 soundcard as main input+output in OS X 10.7.4, and it seems CoreAudio is buggy like in Mac OS X 10.5.7 . I'll explain the facts.
The main issues are:
1) Sound crackles and distorts;
2) I cannot hear ANY signal is volume is not set to 100%
3) Bug(?) in MIDI Control Panel.
When I plugged the mixer into the USB port, OS X immediately recognized it as input and output device. To configure it, I opened the MIDI Control Panel (Utilities -> MIDI Audio Control Panel) and the following window appeared:
[View fullscreen at https://tyrexionibus.com//uploads/05-2456062.png ]
I mistakenly selected the other "Device" as clock source and the sound stopped working. By re-selecting the main "Device" (this makes some confusion, because both sources are named "Device") the sound still doesn't work.
I managed to get it to re-work by selecting "48 kHz" as sampling frequency and then re-selecting "44.1 kHz", but now the sound crackles, distorts and is very bad even at low volumes. (Mixer is set to 44.1 kHz)
In addition, I cannot modify the volumes for the 8 channels. Why?
I need to wipe out the DN-X1700 configuration to go back as OS X never saw it. How can I do this?
Before my mistake in selecting the other clock source, I could hear the sound, but ONLY if the volume slider was set to 10 (100%). Even at 99%, no master output was present.
I have reported this to DENON too, you can view my thread at http://www.denondjforums.com/forums/viewtopic.php?f=43&t=17858 .
How can I solve these issues? Please help, I need it for work.
Tyrexionibus

Similar Messages

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

Big troubles with FTP upload since upgrade to leopard

Hello out there,
I made an upgrade from tiger to leopard 3 weeks ago (10.5.7) on my iMac (Intel - early 2006). Since this time I Have big troubles with ftp upload.
I'm using Cyberduck as FTP client and it worked very well before but since the upgrade it starts quick and falls down to a view kb after a view seconds. Sometimes it stops completely.
Target Server is checked and working well. Also the ISP is fine (tested with a windows machine).
As it is important for my business (photographer) I would appreciate if somebody can give me a quick hint how to solve this problem.
Thanks in advance

I am also experiencing this problem, but only (so far) with one hosting company of the many I FTP into (web designer). The symptoms are exactly as reported above. Files initially start uploading fine, then slow to a crawl and stall. This is the same regardless of FTP software. Error reports say the server is not responding.
This problem is the same using my daughter's computer (also running 10.5.7), but my son (being my son) hasn't updated his OS since 10.5.5 and I encounter NO problems whatsoever FTPing from his machine, nor from a PC.
It's only the uploads that seem to cause a problem. Communicating with the server to download, rename, move or delete files presents no issues.
(In trying to track down where the problem was, I also discovered that the traceroute command to any site on both 10.5.5 and 10.5.7 stalls at the modem, though pings work fine as does tracert from the PC.)

Audio Input Problems with Alesis MultiMix 8 USB Mixer

I have hooked up an Alesis MultiMix 8 USB mixer and condensor Microphone to my new iMac G5's USB port. When going into the Sound Control Panel my input slider for Audio in is grayed out and states that their are no input devices, (I chose the USB input device instead of internal mic.), yet it does pic up the sound from the mixer and mic. Also, I change my preferences in Garageband to use the USB mixer and Mic, but my Track Editor "wave forms at the bottom af Garageband are barely visible, no matter how loud I set the input volume. I used to have very large wave forms in the track editor when using my Logitech USB mic. The sound is fine when played back but it is a real pain when trying to edit in Garageband when I can barely see the wave forms in the track editor. I have tried this set up on my Powerbook also, with the same results. Can someone please help me with the settings using this mixer so I have GOOD usable wave forms in Garageband. Thanks -Swomper

gozo41 wrote:
i get the message: Can't enable track for recording; Track is in use.
Any suggestions?
as iSteveus said, you'll only be able to record 2 tracks at most. skim this tute for the solution to your error:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
and this one for a little more on recording 2 tracks:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks

Big trouble with my KT4 Ultra

I got trouble with my computer!
During install of Windows XP i got an error like this: Wrong syntax in row 285 in the .SIF file thats been using of the installation program, turn of your computer.
My hardware configuration:
MSI KT4 Ultra
AMD Athlon XP 2200+
2 x 256M DDR PC3200 (Twin Mos)
MSI Geforce 4 Ti 128M DDR (MS-8870)
Soundblaster Live 5.1
IBM Deskstar 20GB
Seagate Barracuda 80GB
Please Help!!!!!!!!!!!!

Tanks for all help!
My computer is up and running now, but with only one memory module!
After a test with memtest-86, it shows that i got one bad memory module. Thats why I have all this trouble.
This is what i read about the mainbord about memory, so it should work with 2 x 256M PC3200 memory.
* When FSB setting 166MHz the memroy only can
running at DDR333 mode.
* DDR400 memory support by MSI certified module only
* DDR400(PC3200) max. up to 2 DIMM slots.
* The tested and qualified DDR400/PC3200 DIMMs are
listed below: Vendor Type S i z e Maximum Number of DIMMs
TwinMos Winbond W942508BH-5 256MB 2
TwinMos TMD7608F8E50B 256MB 2
TwinMos Winbond W942508BH-5 512MB 1
TwinMos TMD7608F8E50B 512MB 1
Thanks for the help!!!!!!!!!!!!

Big Trouble with iMovie

I recently upgraded to a new graphics card (ATI Radeon 800XT) to support an Apple 30 cineman display on my Dual 2.5 GHz PowerPC G5.
All other applications (iPhoto, Freeway, Photoshop, Safari) seem to work fine. However, iMovie doesn't. The application opens from the dock and reads files, but I can not activate anything with a mouse click in the iMovie window. The elements in the window are totally nonresponsive. I can however, close, export and do other menu-driven things in the iMovie control bar.
Some things I've tried:
1. I deleted the iMovie preference files (I found only one)--no help
2. The imovie files in question are on an external drive--but that drive works fine and can be accessed directly
3. I was having trouble with frozen start-up when I first set up new graphics card. I figured the computer was trying to read the old graphic card's driver. I delted all items with the old graphics card name and that fixed the start-up problem. When I put these back in it does not seem to help the imovie problem
Any ideas?
Any chance that reinstalling iLife will help?

....to support an Apple 30 cinema display on my Dual 2.5 GHz PowerPC G5. ... ... iMovie is simply overwhelmed by such hardware!! sorry, just a silly joke, SCNR!!!!
anyone?

Big trouble with Nokia X3-02 alarm snooze function

Hello Nokia programators,
I have any big problem with alarm snooze function in my new NOKIA X3 02 mobile.
Please read this situation:
On my old mobile Nokia Classic: I sleep, sleep. Is 5:30, alarm ring, ring. Whith
closed my eyes i touch to one big buttons on my locked mobile. Alarm paused,
and after 10 minutes ring, ring, ring. Is super, i do not oversleep.
In my NEW !!! Nokia X3 02: I sleep. Alarm ring. Whith closed my eyes touch to
display or any key. ALARM TOTAL OFF and i oversleep to my work. For snooze alarm
to 10 minutes i must open eyes, touch to one small button, write unlock key, send
unlock key and set snooze alarm on left corner my display. Oh my god !!!! This is
NEW mobile with NEW operation system for users ???? Please modify this function.
I must use my old NOKIA for this problem. X3 02 is fine mobile for users standard
mobile. This function is very bad and total degradate this mobile for me.
Please add users option for snooze touch to display or any keys to new firmware.
Very thanks

I've had the same problem ,and the only remedy (for me ) is to always set the date On 02/05/2011 and then set up the alarm on Am/pm setup
Only then the alarm works ,even on the next day i.e. 03/05/2011 the alarm doesn't work and show me message like "168 hours remaining" ,you always need to set it up to 02/05/2011 (Well i don't exactly know if that date will work for you ...but surely the soluution is to set it the a date it will work ...try many dates

I'm having big trouble with my new mainboard.

Please help!
I've bought myself a new mainboard, a MSI K7N2 Delta-L. I was having trouble getting Windows XP to detect my harddrive, but then I found out that I had to to first format my harddisk. But now I've got a new problem. I first tried a different harddrive on my computer, to see if something was wrong with my harddrive. But, there wasn't, since I tried my harddrive on another computer, and it worked. So, when I put my harddrive back into my computer, I can't enter BIOS. The screen either turns white, or some colors appear, and nothing happens. If I start without trying to enter BIOS, the same thing happens after detecting IDE devices (which takes an unusally long amount of time). When the white screen is up, my CD-rom tries to start my Windows XP cd several times, but, nothing happens. How can I get my computer to start normally, so that I can reinstall Windows and live happily ever after.
-Krelian
MSI K7N2 Delta-L
TwinMOS PC3200 DDR-DIMM 512MB m/Winbond
AMD Athlon 1.2 GHz
Western Digital Caviar 120 GB
Plextor CD-RW 48x/24x/48x IDE
Sony DVD Player
Sapphire Radeon 9500 PRO
Creative SoundBlaster Audigy Player
Chieftech Dragon Miditower

I pulled the jumper out of my harddisk, and it detected IDE devices extremely fast, as it should. But, I still can't enter BIOS. After detecting IDE devices, the screen turns white, but not for long, I could hear the harddrive booting, and the Windows XP boot screen appeared for about half a second. Then the computer restarted, and the same happened again.
-Krelian

Big trouble with "The application 'Firefox' can't be opened

Hello
I have a big problem. I cannot use firefox, either quit it or use this application. If I want use firefox than I get the Information "The Application firefox can't be opened -600". And also I cannot close my macbook Pro (alas it is a Retina) or trying reboot. It still stands and nothing changing on the desktop from the macbook. I have red some some problems with the probably solutions how can fix it, but I'm afraid about, that I would make a big mistake and destroy the macintosh Marverics System that I have.
Please. I need help !
Thank you!
Canno92

This Step failed a lots of time. I tried everything in my mind. I tried to do this step you suggest me now, and nothing (some tries before) happened. What can I do to not have the message "the application firefox cannot be opened - 600" ? Its really **** that that happened now..
I tried to reboot - nothing changed
I tried quit the application - nothing changed
I tried to hold he "shut down" button - nothing has changed or has shut down
I tried go to system preferences/application/ and tried to trash the application - nothing changed, because the application is still working/or in use. And this s*** is really confusing me. Therefore I can not use firefox, not trash the application because it is in use, or either close the application to shut down or restart/reboot my macbook Pro.
Any other suggestions? If possible, than it would be very kindly.

Big trouble with missing (...) Folder

Hallo everybody
Just happily upgraded to 2.4 but...today I found out LR was showing as "Missing" (marked with "?") a folder that has been quite a long time located in the same position (internal HD) but more strange is that when I tried to relocate it trough the "Find missing folder" action, this is what happened:
- LR put all the pictures in Previous Import
- the folder that should have been relocated was still in the same position (without question mark), with same title, showing same pictures amount but...
- when I clicked on the folder, an empty screen came out with a notice "No photos in selected Folder" (file counter was displaying 236 files...)
To fix the whole thing to place the Folder in the right position, I had:
- to delete the Previous Import
- to delete the (empty) original folder
- to re-import the files
At the end, after a lot of struggling, I found I lost all the settings about the pictures (ratings, develop, etc) made at the time........
Can anybody tell me where did I go wrong?
Fabio
p.s. besides that, I have to agree there are big improvements from 2.0

Hi John
today I had another mysterious (at least for me) behavior from LR.
I updated the location of a folder I already had on my catalog but when the folder moved in his new location some of the grid previews were not visible and were tagged with an exclamative mark; then they became visible when I clicked on them one by one (in grid view).
Shouldn't LR always retain the previews?
If I tried to enlarge them to Standard view before they were visible as grid I got a message "There was an error while working with this photo" and the standard view took some extra time to show up.
I also noticed that sometime I can't see previews of folders that have been a long time in my catalog.
What's wrong with my LR?
Fabio

BIG Trouble with my iPod

When I press any buttons on my iPod it shows apple logo, and then show a sad iPod icon. I read that I should to restore it. When I connect my iPod to pc it didn't find iPod because iPod just restarting and shos low battery icon.
I also can put my iPod into disk mode. It show check icon and write text below ok to dissconnect, and when I connect iPod to pc with disk mode it began connecting, because it show icon when iPod connected to pc and writing text do not dissconect, by the trouble is that on the 7-10 second of connecting my iPod just restarted and show apple logo and then sad icon. So I can't connect iPod to pc, and I can't restore it with ipod updater software.
I think that in moment when pc in connecting must enable drive with iPod, my iPod just restarting. One more thing, then iPod getting on I can feel in my hand that iPod hard drive make some click , something like it go on some part of drive and go back again and again....
Please help me. What can I do with this kind of problem. Sorry for my english.
P.S. iPod 3gen with click wheel.
intel Celeron Windows XP Pro 2.5Ghz, 512ddr2
intel Celeron Windows XP Pro 2.5Ghz, 512ddr

Hello,
Check this out (you may have seen this, though):
iPod shows a sad iPod icon
If an iPod has a folder with an exclamation point or is "sad", that typically means that its hard drive is out of place. Try this:
Tap your iPod firmly on either side several times with your hand. This may work to tap your iPod's hard drive back into its correct place. It actually has worked for a lot of people, so it isn't just a joke!
~~Kylene

Big trouble with importing my .MOV files into any editing software.

Hi All
I am new to the forum and i would like to ask you a really big question that has been bugging me for days now.
I have a Cannon 700D and i have CS 4 pro and Cyberlink Powerdirector 12. Both worked fine with any other video file, but when i tried to import a file originating from my cannon 700D camera both of the softwares stated that the files were either corrupted or not supported. The error message also stated that i should call the video provider to ask for an alternative video footage (which is me ). I tried having quick time installed so that it could install various other kinds of CODEC so that it could read and I have also tried switching the camera settings from PAL to NSTC. I would be really glad if anybody could give me an explanation and a detailed explanaiton on how to fix my problem. Thank you very much in advance.
Pepe

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Big trouble with syncing all infos over iTunes

First time ever since i have an iPhone (and iPod) i got a big problem who i can't solve at the moment.
Each time who i connect my iPhone 4 to iTunes i got the info, that my iPhone can't sync any informations on my iPhone, because syncing on my Mac is disabled. If i didn't enable it, i can't sync my calendar, contacts and mail-acounts.
Two buttons: Yes / No. If i click on yes, the next message will popup. Syncing cannot be enabled on this computer.
Two buttons: Overwrite / OK.
Booth are didn't solve the problem.
I try to reinstall iTunes 10 (including mobile sync) and restarting my iMac, but the problem still exist.
I noticed to, that i can't start iSync...
Has anyone an idea what i can do?

Problem is solved...
It was something around iSync and the sync-manager. I got a hint on macrumors.com who you can found here:
http://forums.macrumors.com/showpost.php?p=9415673&postcount=6
Look at the second post after the one who i linked from the user "valerina". I only delete the pref.file and i check the keychain (without any problems). After that iSync work and i can sync my iPhone to. Only the Mail sync is't work at the moment, but I can life with that and I'm sure that i will found a solution to for that.
+1. There is no need to log in as ROOT about removing files if you are administrator+
+2. You need just to trush the file, named com.apple.syncserver.plist. It is inside Users/'Your username'/Library/Preferences+
+3. It is not bad idea to repair with First Aid the Keychain and to Clear the cash using /Applications/iSync/Preferences...+
+4. Now You can start sync with Mobile me.+
+If You still have problems:+
+1. Go to MobileMe and revoke your certificate and password+
+2. Go to iChat and take another certificate+
+3. Go to Mobileme preference pane and log out+
+4. Go to Airport app and change the password+
+5. Go to MobileMe preference pane again and+
+5.1. Log in+
+5.2. Turn on the Back to My Mac+
+5.3. Unsign your username from syncing with Mobile me+
+6. Try to sync+

You can have BIG TROUBLE with FIOS (half phone line only)

Hello world,
I got the FIOS mid-September,
and this week it will be one month since my phone line broke for a lot of people (they can't call me anymore),
and Verizon can't do anything to correct their misconfiguration.
So, I am alone, with half of a phone line and with an operator (Verizon) who is doing nothing.
My situation: people from Cox Communication (a famous but local operator in my state) are impossible to call me (when they try they receive the information my number doesn't exist) because I asked to Verizon to keep my number and to move it from Cox to Verizon FIOS (so, I wanted to keep my number, very simple, but impossible for Verizon).
For 4 weeks, I am trying to explain this simple situation but their answer is "all is fine from Verizon".
Does anyone have an idea to solve this stupid situation?
Thanks

Understand that if this is impacting incoming calls from people uing your old "phone" company but not calls coming from other service providers (i.e. non-Verizon but not Cox customers either), then the problem is on Cox's end.
Cox never deallocated your number properly when you ported it over to the Verizon -- so they still have it defined in their tables as belonging to them and when people try to call it from on the Cox network, it goes to a disconnected number deadend.
If this is the situation you have, then you must call Cox and tell them that you "ported your number out to a new provider" and ask that they "release and deallocate" the number from their system as they no longer own it so that calls from customers on their network witll terminate properly. It will take some persistence and you'll probably need to get past the first level tech support person and make sure you get someone who understands the phone network definition process to get them to fix it.
If you can't receive calls from anyone -- except other Verizon customers -- then it's a Verizon problem in that they haven't properly completed the port of the number from your old provider -- who is probably still holding the number in an inactive state. If this is the scenario, then Verizon is the one who has to fix this.

Big troubles with loading Sun Java on my laptop,

I can download Jre-1_~1.exx 16291424 this Java download from Java, only it won't load on my computer laptop, I have a IBM Thinkpad that also has 128 bits of memory, and is running Windows 98, and Internet Explorer 6.0, I keep getting this error all the time, the error is 1722, there is a problem with this Windows Installing Package. I really need to install this java program or else I can't go to a lot of places. Please someone help me out.

please help me for live chat in facebook for quick response thanks

Big trouble with DENON DN-X1700 USB mixer/soundcard - CoreAudio bugs like in OS X 10.5.7

Similar Messages

Maybe you are looking for