Big White X on Viewer video

I had a Keychain camera record an AVI file, then ran it through Stream clip to create an mov. Big white X on the viewer. I have set In's and outs but won't seem to take either over to the canvas or to the timeline below....
ROcket launch video.

ok i made the video long ago. was reading through this getting ready to start the next project, when i saw this note.  Maybe Tom can spare 3 minutes to watch.  Pretty good for a Key chain camera. The next one is a one minute promo for a Scouting activity.  Starting with a bunch of .avi footage and moving to Mpeg stream clip , adding a V/O , music ands sound and laying it all down.
but first as a way of thanks. here is the little video.
http://www.youtube.com/watch?v=KVYtw0sYVqY
The slow motion at the end isn't bad.

Similar Messages

  • In imovie '08 there is a white box behind my video and it wont view in the whole screen anymore. Only in a project 'im trying to make.

    In imovie '08 in the viewing screen there is a white box behind my video instead of it showing in the whole screen like it used to. Even when i try to play the movie in full screen that white box is still behind the movie. I dont know what setting I changed or why now all of a sudden this box appears. Please help if you know how to change it back. Thank you.

    Create a New Profile as a test to check if your current profile is causing the problems.
    -> Basic Troubleshooting: Make a New Profile
    * https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    -> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
    -> Recovering important data from an old profile
    * https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    Check and tell if its working.

  • Internet access problems and viewing video on internet

    I have very limited interet access most of the time.  I get a message: "You are not currently in an area that can handle data communication.  ..."  I have no problem with email and other features of the phone during this time.  The signal at the top of my phone says "GSM".  When I am able access the internet, it give me a different signal (can't remember what that is, however).  Even then, I cannot view most video clips, such as YouTube clips.  They will not load all the way.  It states, "Error has occurred in attempting to play media."  Help!

    I have unlimited internet access, so that's not the problem.  Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage.  I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home.  I've also been able to view a video clip, not successfully all the way through, however.  During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot.  This has also happened when the phone has not even been being used.   Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did.  Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips? 

  • How to view video Exif data in Bridge

    I cannot view video Exif (i.e., camera settings) data in Bridge.  I can see it for still images.  I shoot video in both MOV and MTS, but can see it for neither.  How do I view it?

    Thanks.  Is there some equivalent of Exif information for video?  For stills, I shoot RAW and much appreciate being able to veiw the camera settings once the file is in Bridge.  I'm new to video.  It would be even more helpful for me to see the video details, so I can better learn from my practicing.  I can view some video file data in my camera after shooting:  f-stop, white balance method, compression method, aspect ratio, and frame rate.  So, this data is being captured and stored on my memory card.  After downloading to Bridge, I'd like to be able to view this same info there.  Is this possible?

  • I get a green screen when I am trying to view video on flash player, it happpens intermittently

    my laptop keeps showing a green screen when I am trying to view video on flash player. It happpens intermittently, but once it starts I need to shut down & restart before it will work again. My laptop is less than a week old. shockwave flash is enabled and activeX filtering is off

    Hi,
    Open window Control Panel, open Windows Updates, select View update history in the left hand pane, then select 'To remove an update, see Installed Updates'.  Let the list populate, then locate update KB3001237, right click it and select Uninstall - when this has completed, restart the notebook.
    Download and reinstall the latest driver for your particular graphics chip - the drivers and software page for your notebook is Here.
    Restart after this reinstallation.
    When windows has reloaded, reinstall update KB3001237 via the standalone installation options on the following link.
    http://support.microsoft.com/kb/3001237
    Again, restart after the installation.
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I cannot view videos and have downloated Adobe Flash Player several times.

    I have downloaded Adobe Flash Player several times and still cannot view videos.  I get the error message "you do not have Adobe Flash Player" and the screen for me to download it.  Please help.

    Hi,
    Try the following.
    First, download the Flash uninstall utility on the link below and save it to your Desktop.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows and run the uninstaller.  After this has completed, restart the notebook.
    Next, ( unless you already have it ), download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if the videos play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart Internet Explorer.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Viewing videos?

    How do I view videos transferred from the Treo 700 to my computer? Is there particular software that is required?
    Post relates to: Treo 700p (Verizon)

    Hi,
    As you're using Internet Explorer, it's worth trying the setting change detailed below and see if this makes any difference.
    Open an Internet Explorer window.
    Hold down the alt key and press x, then select Internet Options.
    Select the Advanced tab, enter a tick in the box next to 'Use software rendering instead of GPU rendering', then click Apply and Ok to save this change.
    Close all open Internet Explorer windows, then open it again and try playing a video.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • You Tube videos don't play. The site comes up, but a blank white screen where the video should be.

    When I try to play videos from You Tube, I get a blank white screen where the video should be. When I go to full screen the whole screen is white. Originally the white screen happened on the expanded view only.
    IE doesn't have the problem, but Google chrome and Firefox 4.0 do.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Try to disable the hardware acceleration in the Flash Player.
    See:
    * https://support.mozilla.com/kb/Cannot+view+full+screen+Flash+videos
    * http://www.youtube.com/swf_test.html (right-click the player: Settings)
    Flash "Display settings" window:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • MSI GF4-TI4800SE (VTD8X) - White Square in Captured Video?

    Hello,
    When i try and capture video I get a big white bar across my captured video. I have the latest drivers, and Windows Xp....  any suggestions?
    Thanks
    Jon M.

    Our forum "Search" option brings back a lot of decent results.
    Click on the icon at the top of this forum and enter "white bar" (without parenthesis), in the "Search for keyword"  select match exact phrase, under "...where and how", select "Multimedia (VGA and optical drives)" don't change anything else and click on the "Search" button.
    You should get at least 11 results.
    some were reporting reverting to an older capture driver solved the problem. You are on your own, as I didn't take the time to see when these posts were made and/or if the older version of the capture drivers are available here.
    You may have to look to a third party solution or a website, like Driverheaven or guru3D............Nvidia may help too but I do not know. Make sure you uninstall the capture driver properly before you install the other.

  • Why can't I view videos sent to my IPad 2 from an IPhone ?

    I cannot view videos sent to my email on my IPad 2 from my daughters who have IPhones? Do you have this problem? We can access FaceTime ok. Any suggestions.

    Unless those videos are very, very short, they probably aren't e-mailable. Many e-mail providers cap sizes of attachments at 25Meg or less (quite often much less). I once shot a 3 minute video on my Touch that was over 150 megs.
    There is a big difference between facetime - which is streaming video - and e-mailing a video.

  • Can't view video in iPhoto

    Can't view video in iPhoto on my iMac but I can view it on my iPad! Source of video iPhone, sent to me via email. Appears in iPhoto on my iMac as a blank folder. Using OSX 10.9.5 Maverick. Any ideas? I have the same problem with a voice recording sent to me in the same way.

    That's a whole new ball game.  Go the System/iCloud preference pane and uncheck the Photos check box.
    In iPhoto go to its iCloud preference pane and uncheck all checkboxes.
    Reboot, and go back to each preference pane and recheck those boxes.  That should jumpstart the Shared Photo Streams.

  • Can not view video over the Internet on WVC80N

    I set up the web cam, set up the port forward etc so now I am able to:
       1. view/change web cam settings inside my home network.
       2. view video inside my home network.
       3. view/change web cam settings over the Internet.
    But I am not able to view video over Internet. Every time I did so (using IE browser), after clicking the view video button, I got an error : There are too many user connections or the device is busy, please try again latter.
    Anyone has a fix on this? I set up port forwarding on port 1024 (that's how I can chage settings over Internet).
    I spent 2 hours on the phone with Linksys tech support but they could not find the reason.
    Thanks,
    Sam

    Who is your ISP? How you are trying to access your Camera from the remote location? Along with Port 1024 you need to do port forwarding for port 80 on your router for the Cameras IP address. As WVC80N works on your HTTP Port.
    To access your camera from the Remote location, you need to use http://wan ip:80.

  • Can not view videos on you tube in firefox4 using flash player11

    I'm using firefox 4 and i can not view videos on you tube.I've updated and reinstalled adobe flash player twice with no results.I've also tried the other checks,security blocking,cache,pop ups etc Works fine on IE. Hope someone has a solution.I've always liked firefox but not the newer versions and many of the changes;

    I can't believe you're still running Firefox 4. Why not a newer version?
    There are a number of active threads concerning the latest Flash player plugin (11.3) and the latest Firefox (12-13). Not all users are experiencing the same issues, but things to check include the following:
    - Conflict with Realplayer Browser Record plugin (to disable this, open Add-ons from the orange Firefox button or the classic Tools menu and look under the Extensions and Plugins categories)
    - Conflict with Flash 11.3 Protected Mode (see [http://forums.adobe.com/thread/1018071?tstart=0 Adobe Forums: How do I disable Flash Player's protected mode for Firefox?])
    Scanning down the front of the forums probably will yield additional suggestions: https://support.mozilla.org/en-US/questions
    Does any of that appear promising?

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • HT201401 last night my iphone screen all of a sudden was solid blue and now it is black. I put it on the charger and this morning it is totally black.  However, I did hear the text message signal go off. When I turned the volume on and off a big white bel

    Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off.  Still nothing appeared on the screen.  I put it on the charger and this morning it is totally black.  However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed.  In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on. 
    What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.

    just do reset, press home button and power butoon for a while untill you can see apple
    gud luck

Maybe you are looking for