BigBang X-Power Fails to POST Following ANY Changes in Cell Menu

Whenever I try to manually enter any settings for the CPU with the aim of overclocking or underclocking (even if it is only a 5MHz increase in base clock from the stock 133MHz) the machine will not boot correctly. I don’t get any video signal so I'm assuming that it doesn't even post.
Is there anything special that needs to be enabled or disabled, or are there any tricks that need to be done in order for overclocking to actually work on their boards, in particular the BigBang X-Power??
I purchased this board last week and I can't figure out why this keeps happening.
Everything runs fine under fail safe/default configuration and I've confirmed nothing is dodgy with memtest/prime95/3DMark tests, although, I already know all my hardware is fine because the only thing I have replaced is the motherboard.
Prior to the swap over I was able to run 4GHz no worries on the UD3R, however now I can't even raise the base clock 5MHz without it dying! It's not just when the base clock is adjusted either, bringing the CPU, RAM or Uncore ratios down in line with the 3 step overclocking guide also has the same effect.
I noticed that when it dies that the post debugging display shows C0 which equates to "early CPU initialization" in the manual. Also the board comes with two 8pin CPU power connectors however I have only connected one power connector – it doesn’t say anything about absolutely needing two 8pin connectors so I didn’t bother connecting two. I have also tried multiple BIOS versions but still nothing.
I’m pretty close to asking for an RMA but I’d like to get some opinions first and maybe speak to MSI directly.
All help is certainly appreciated!

Quote from: NovJoe on 13-April-11, 14:53:30
Please post full system specs please.
Sorry I forgot to add that in.
CPU   Intel i7-950
MB    MSI BigBang X-Power
RAM   6GB OCZ Platinum 1600MHz 7-7-7-24
GPU   2x MSI GeForce GTX 560 Ti 1GB Twin Frozor II
SSD   G.Skill Phoenix PRO 120GB
HDD   2x Western Digital Caviar Green 2TB
PSU   Seasonic X-750
SC    Asus Xonar Essesence STX
BOX   Silverstone Fortress FT02B
MON   Samsung BX2440
HS    Thermalright Silver Arrow
TIM   Indigo Xtreme 1366 2 Pack
KB    Razer Lycosa Gaming Keyboard Mirror Edition
M    Razer DeathAdder Gaming Mouse V2
MM    Razer Goliathus Fragged Standard - Control Edition
HP    Audio Technica ATH-AD700
OS    Microsoft Windows 7 Home Premium 64bit OEM
Quote from: HU16E on 13-April-11, 14:32:08
what BIOS version are you currently running? Including the latest betas?
I've tried 1.3, 1.4, and 1.5 BIOS versions - I am currently using 1.5. Addmittedly I haven't tested any of the beta BIOS options but, , I'm not running anything super new or out of the ordinary. I'm 100% sure that this is not a BIOS issue.
Quote from: HU16E on 13-April-11, 14:32:08
Amps on the PSU +12V rail(s)? Connecting power to both JPWR2 & JPWR3 is not mandatory, but does help balance the load in the higher clocks.
No idea exactly how many amps I am pulling over the +12V rail. My PSU has a single 12V rail with about 60amps available - I have plenty of head room there.
Quote from: HU16E on 13-April-11, 14:32:08
This is a user to user forum, so direct contact with official MSI support would be a ticket submitted to MSI Tech Support.
Yeah sorry what I was trying to say was that if I couldn't get the issue resolved by posting here then later I'll get into contact with MSI.
Thanks for the super quick replys guys.

Similar Messages

Facebook timed out while writing a post. Any attempt to open FB, now shows post that was in progress and immediately crashes app. Cannot clear timed out item. Have power failed and done warm reboot on iPad.   Is Delete/Reinstall only option?

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

There is a thread or two about the home button and how to fix it at least temporally. It sounds like some people have found it to be a rather permanent fix. Do search on something like "Home button won't work". It has something to do with putting the charging cable into the phone and applying a little extra pressure upward on the key. Don't take my word for it though look for the thread/s. You said originally that your "Power" button was broken and the thread I have seen is about the Home Button.

H330 won't switch to UPS when power fails

I have an APC XS 1000 UPS with updated PowerChute software that worked fine with my former desktop (Dell), but my Lenovo H330 will not switch to it if the AC power fails. Windows 7 says the APC is working normally, it passes a self-test, and all of the peripheral devices that are connected to it switch over without a problem. But the H330 just immediately shuts off. Anyone have any ideas? .

hi America2468,
Welcome to the Community.
Assuming all peripherals are connected properly to the APC XS 1000 UPS and it's not exceeding the 600 Watts load (as per this specs sheet) then most likely the problem is with the battery. As per this article, newer UPS units will power up on a dead battery (your UPS maybe included on the list).
Check if the replace battery light is ON and replace it accordingly - see this article as a reference.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Portege R500 fails during POST

Hello all,
I've got a Portege R500 for an year now and yesterday it started to fail during POST, I presume.
The display is stuck at the power on screen, with the boot device selection icons, but no action can be taken (entering bios, selecting boot device, etc...). I've already tried to remove the battery for a couple of hours, without any result, but I assume that It would take more than a couple of hours to deplete the backup battery and reset the CMOS...
Other than the boot screen, no other information is available, so I'm thinking that this machine is dead... Does anybody had a similar problem?
Best regards,
Paulo

Hi
The POST (power on self test) is executed by BIOS.
During the POST some components and parts on the motherboard would be checked.
For example POS checks the CPU, CPU related modules, CMOS RAM, CPU cache, GPU memory, main RAM and other hardware components, etc
In most cases a hardware problem on the motherboard can be the reason if the POST cannot be passed properly.
Usually the technician would recommend replacing the motherboard but as you know the motherboard is not cheap. Its one of the expensive notebook parts.
Its not easy to say what the best solution for you is; I think you should ask a technician for a hardware check and then you would know whats exactly wrong
After that you can decide what you want to do

G33M-FI Fails to POST without clearing CMOS

Hello,
I purchased a new system with a G33M-FI mainboard in December. Everything worked great on the first boot, but the first time I restarted it failed to POST. I had to clear CMOS settings using the jumper. On the next boot I updated the BIOS to 1.2, restarted multiple times and everything worked fine for a while...
Now occasionally the system again fails to POST. This does happen on both a restart or a cold boot. Each time this has happened clearing the CMOS settings with the jumper does "fix" the problem and allows the system to boot again but it is VERY annoying. The problem also appears to be getting more and more frequent as time goes on (but maybe this is just my imagination). I have been leaving all of the CMOS settings at the default values so I don't think this is caused by something I did.
Any thoughts?
Here are the system specs:
MSI G33M-FI (bios version 1.2, default settings)
Core 2 Duo E4500 2.2G (800MHz)
Patriot 2GB Kit PDC22G6400LLK (2 sticks of 1GB, 800MHz 4-4-4-12)
Antec NSK3480 micro ATX case w/ 380w power supply
WD 320GB 3200ks SATA hard drive
Samsung sh-s203b/bebn DVD+/-RW sata drive

List PSU details, look for them over PSU sticker.
Try with just one memory stick alone in a 1st DIMM slot near to CPU socket and see if problem persist.
You may need to up memory vcore a bit,(in BIOS ==> "Frequency/Voltage Control", "Memory Voltage", Setup 2.0V and re-test)
PDC22G6400LLK:
http://www.patriotmem.com/products/detailp.jsp?prodline=5&catid=2&prodgroupid=38&id=317&type=1

Following error occours when running a BI Publisher report in Siebel: Operation ' ? ' of Web Service ' ? . ? ' at port ' ? ' failed with the following explanation: " ? ".(SBL-EAI-04308)

I am installing a new reporting server.
When running a report I get the above error:
Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308)
Any ideas?

Have a look here for Oracle's guidelines on troubleshooting such errors:
http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot.html

JBO-26041: Failed to post data to database during "Insert": SQL Statement "

Dear All,
I am trying to insert the data into custom table,getting the following error. Please help me to resolve the issues.
I have created one custom table in APPS schema having the primary key and History Columns.
Created the EO based on the custom table and generate the create method.
Created the VO based on the EO and generated the VOImpl, RowImpl Java Files.
I am using the PER_PEOPLE_S sequence to populate the value into Primary key column.
Calling the below code into create method of EO object to populate the value into Primarykey column.
setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
oracle.apps.fnd.framework.OAException: oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO XXUTS_PERSON_T(PERS_PERSONID,PERS_FIRSTNAME,PERS_LASTNAME,CREATION_DATE,CREATED_BY,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN) VALUES (?,?,?,?,?,?,?,?)".
     at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(Unknown Source)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
     at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:72)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.sql.SQLException: ORA-00911: invalid character
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
     at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
     at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
     at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
     at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:72)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
java.sql.SQLException: ORA-00911: invalid character
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
     at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
     at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
     at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
     at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:72)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Thanksm
Sai Sankilisetty

Dear Kumar,
I have checked the datatypes of the table and datatypes of the Pageitems, both the datatypes are same.
I have created the region using the wizard based on the VO.
My custom table having only 3 columns and History Columns.Out of 3 columns PersPersonid is Primary key column and I am assigning the sequence value to the column in create method of EO as below
public void create(AttributeList attributeList) {
super.create(attributeList);
setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
//Here PER_PEOPLE_S is the Sequence
Thanks,
Sai

SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate Dimension

Hi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Can no longer view photo library, after power fail (during LR upload)

Good day.
My computer power failed during a LR3, beta2 upload.
After restarting, I can no longer see any of the images in my library (~50k images) that were not part of the upload...but they are still there. In the 'grid' screen, gray boxes appear, but instead of images within those gray boxes, I see lighter gray portrait/landscape rectangles.
I'm certain that the images are there, but I can only see the images if I am in the 'develop' window, 1 image at a time.
I am hesitant to reinstall lightroom, as I do not want to loose my LR catalog (and have not backed up in a bit...yes yes, I know).
Any help would be greatly appreciated*
Thanks!

Those are the classic symptoms of a corrupted preview cache. There is a folder named <whatever>previews.lrdata that lives next to your lightroom catalogue which is named <whatever>.lrcat. Delete the .lrdata folder (and all its sub-folders) (but NOT the catalogue file!) and restart lightroom. It will rebuild your preview cache, and all will be well.
Hal

While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.

Try this
iOS: Device not recognized in iTunes for Windows

Aperture 2.1.3 fails to post an Album to my MobileMe Gallery

Not sure if this is specific to my MacPro but in 10.5.7 Aperture has consistently failed to post an Album to my MobileMe Gallery. Is anyone else having a problem? I've exported the 53 versions as JPG full size and imported them to iPhoto 9 and created an Album. This has successfully posted the Album on my MobileMe Gallery.
Failure is evidenced by the sudden disappearance of the Album from the MobileMe Album list of titles in Aperture, with nothing registered in MobileMe.
Any clues gratefully received!

Thanks - Ernie and Pistol! I suspect the the matter of a file version name could be the cause, but I'll have to conduct a careful check of them all in the recalcitrant album. The same Album - once in iPhoto 9 - has posted OK though, and it has the same version names. But there may be differences between iPhoto and Aperture. I think there's a Knowledge Base article about this - will check out later.
Thanks very much for both posts!

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

BigBang X-Power Fails to POST Following ANY Changes in Cell Menu

Similar Messages

Maybe you are looking for