Bigger text in ABAP webdyn

how to make bigger text in ABAP web dynpro

Hi Jean,
there are several options.
a) as an enduser: use the web browser settings (in IE: menu -> view -> text size)
b) as a programmer: depending on the type of the view element use different designs. E.g. for the element "TextView" use design "header1"
c) as an admin / programmer: call the web dynpro application using your own style sheet.
Silke

Similar Messages

Creating a long text using ABAP code.. fm SAVE_TEXT

When you create an order via IW31 one of the options is to click on the text button and create a long text. I am basically trying to mimic this action from within my ABAP code.
The text id details are as follows:
Text Name       500000015000046 which is (5000000 + order number)
Language        EN
Text ID            KOPF         Order header text
Text Object      AUFK       Order text
If i manually create the text within the transaction i am then able to view and update it via function modules READ_TEXT and SAVE_TEXT. But if the text has not already been created READ_TEXT obviously returns nothing as it does not exist and SAVE_TEXT does not seem to created it!
Anyone know how i would go about creating this text using ABAP code?
Hope this make a bit of sense
Thanks in advance
Mart

I have implemented the code as i think it should be. See below, can any see what is wrong. If i add init_text it makes no difference and adding the commit_text just makes it hang
DATA: IT_TEXTS type standard table of TLINE,
       wa_texts like line of it_texts,
       wa_txtheader type THEAD.
wa_txtheader-TDID     = 'KOPF'.
wa_txtheader-TDSPRAS = 'EN'.
wa_txtheader-TDNAME   = '500000015000056'.
wa_txtheader-TDOBJECT = 'AUFK'.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
    CLIENT                = SY-MANDT
    HEADER                = wa_txtheader
    INSERT                = 'X'
   SAVEMODE_DIRECT       = ' '
   OWNER_SPECIFIED       = 'X'
LOCAL_CAT             = ' '
IMPORTING
FUNCTION              =
NEWHEADER             =
TABLES
    LINES                 = IT_TEXTS
EXCEPTIONS
   ID                    = 1
   LANGUAGE              = 2
   NAME                  = 3
   OBJECT                = 4
   OTHERS                = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Is there any possibility to create ABAP Webdyn pro application in SAP 4.6C

HI All,
My client is in SAP 4.6C version want's to devlop some SAP ABAP webdyn pro application for their end user requirement.
Is it possible to do so if yes how ,they are ready to buy the required H/W and S/W component for the same,but they can't upgrade SAP to higher version at this moment.
As per my understanding WebDynpro for ABAP is dependent on current R/3 version. For that one should have mySAP ERP 2005 I guess.correct me if i am wrong .
Need your suggestion ..
How to achive ABAP webdyn pro application in SAP 4.6C Version.
Thanks,
Dev

Thanks!
Note 1098009 - Limitations for Web Dynpro ABAP
Solution
SAP System Prior to SAP NetWeaver 7.0 (NW2004s)
Web Dynpro ABAP is not released for official use in systems prior to SAP NetWeaver 7.0 (NW2004s).
Hope that helps.
Cheers,
Chris
edit - hmm hope I'm not taking a liberty quoting an SAP note ... If any mod's object - please remove quote - but I can't really see the harm in this case!
Edited by: Chris Paine on Apr 30, 2010 2:12 PM

OTR text from abap

Hi everyone,
I'm tríing to retrieve the OTR text from ABAp code:
ls_info-text = cl_wd_utilities=>get_otr_text_by_alias(
alias = 'YHR1/COMPLE'
language = sy-langu ).
The problem is that the text only retrieved by it's original language, if I try a different language the result is empty
(Of course the text exist in both languages I've double checked it )
Does anyone have any idea what is the problem?
Thanks & bye
N.

Ok I have the answer now.
The only way to translate the text properly is SOTR_EDIT transaction
Here's a guide :
https://wiki.sdn.sap.com/wiki/display/WDABAP/TranslatingTextswith+SOTR

Bigger text in webdynpro

how to make a text bigger in a text field or in a lable in abap web dynpro.
pls help me in this.

Hi Jean,
for webdynpro for ABAP related questions use the WDA forum at Web Dynpro ABAP
regs,
hema.

How to create a view to display Multiple lines of Text using ABAP WebDynpro

Hi,
I need to create a static view page in ABAP WebDynpro that displays Static text data in multiple paragraphs. I tried to use textview, formatted text, text edit controls by binding the textcontrol to a text object that is created in so10, but the output I am getting is only one line and the character count is limited to 60 to 65 characters.
I would like to know which control needs to be used in ABAP Webdynpro to get multiple lines displayed with text formatting like Paragraph, Indenting and Size.....
Thanks for your time!
Madhavi.

Find the sample codes:
data sapscript_lines     type tlinetab.
data sapscript_lines1     type tlinetab.
data sapscript_tline     type tline.
data sapscript_head      type thead.
data text                type string.
data formatted_text type ref to cl_wd_formatted_text.
call function 'DOCU_GET'
    EXPORTING
      id                = 'TX'
      langu             = 'D' "Germany language
      object            = 'WDR_TEST_HELP_EXP1'
    IMPORTING
      head              = sapscript_head
    TABLES
      line              = sapscript_lines
    EXCEPTIONS
      no_docu_on_screen = 1
      no_docu_self_def = 2
      no_docu_temp      = 3
      ret_code          = 4
      others            = 5.
if sy-subrc <> 0.
    text = space.
endif.
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
    sapscript_head = sapscript_head
    sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
    wd_context->set_attribute(
    name = 'FORMATTED'
    value = formatted_text->m_xml_text ).
endif.
clear sapscript_head.
clear sapscript_lines.
*Get the text created by SO10
CALL FUNCTION 'READ_TEXT_INLINE'
EXPORTING
    ID                    = 'ST'
    INLINE_COUNT          = 1
    LANGUAGE              = 'E' "English language
    NAME                  = '85XX_FOOTER'
    OBJECT                = 'TEXT'
LOCAL_CAT             = ' '
IMPORTING
   HEADER                = sapscript_head
TABLES
    INLINES               = sapscript_lines1
    LINES                 = sapscript_lines
EXCEPTIONS
ID                    = 1
LANGUAGE              = 2
NAME                  = 3
NOT_FOUND             = 4
OBJECT                = 5
REFERENCE_CHECK       = 6
OTHERS                = 7
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
    sapscript_head = sapscript_head
    sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
    wd_context->set_attribute(
    name = 'FORMATTED1'
    value = formatted_text->m_xml_text ).
endif.

Translating text symbols and selection texts in abap report

Hi All,
I have devolped a report and in that translation of selction texts and text symbols is required.
Problem: In abap text elements in the report i have gone for goto->translation->and then i have tried to translate by giving the target language as DE and changed all the texts but when i am tring to save it is showing a message that 'STILL 54 OF 54 TEXTS TO BE PROCESSED'.
Alternative solution :I have tried even using se63 and selected <rept> selection texts.
but still its showing the same error ('STILL 54 OF 54 TEXTS TO BE PROCESSED'.)
from se63.
kindly give me solution for this issue.
Thank you,
bhavani.

Hi Bhavani.
Check the [SAP Document for translation|http://help.sap.com/saphelp_sm32/helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm]

[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
<b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
Thanks.
Below----
TRY.
      CREATE OBJECT abap_proxy.
      CALL METHOD abap_proxy->execute_synchronous
        EXPORTING
          output = gs_out
        IMPORTING
          input = gs_in.
Exception Handling
<b>    CATCH cx_ai_system_fault INTO go_sys_exception.
      g_sys_result = go_sys_exception->get_text( ).</b>
    CATCH cx_ai_application_fault INTO go_app_exception.
      g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
     WRITE:/ 'System Error Message      :', g_sys_result.
     WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message      : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju cho

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

Te:Texts in abap hr

Hello,
can anyone please tell me how to get texts for job and position of an employee in abap hr.
Thanks.
Ramya.

Hi,
Check the below code inorder get the details of employee.
CONSTANTS:
        c_plvar(2) TYPE c VALUE '01',
        c_otype(2) TYPE c VALUE 'P',
        c_pos(2)   TYPE c VALUE 'S',
        c_org(2)   TYPE c VALUE 'O'.
*get information from pa0001.
      select single ename werks plans orgeh
                     from pa0001
                     into (wa_emp-manager_name,
                           wa_emp-manager_dept_num,
                           wa_emp-manager_posnr,
                           wa_emp-manager_team_num)
                     where pernr = l_man_pernr
                     and   begda LE sy-datum
                     and   endda GE sy-datum.
select position title text from HRP1000
      select single stext into wa_emp-manager_postext
                    from hrp1000
                    where plvar = c_plvar
                    and   otype = c_pos
                    and   objid = wa_emp-manager_posnr
                    and   begda LE sy-datum
                    and   endda GE sy-datum.
*select team name text from HRP1000
      select single stext into wa_emp-manager_team_nam
                    from hrp1000
                    where plvar = c_plvar
                    and   otype = c_org
                    and   objid = wa_emp-manager_team_num
                    and   begda LE sy-datum
                    and   endda GE sy-datum.
get the pers area text from t500p
      select single name1 into wa_emp-manager_dept_txt
                    from t500p
                    where persa = wa_emp-manager_dept_num.
Regards,
Kumar
Edited by: kumar789 on Feb 17, 2010 5:45 PM

Text Editor & ABAP Syntax Check

Hi all,
I've included a text editor box into my project to allow the user to key in ABAP codes. i got the codes of a sample program but i'm not sure how it works. can anyone kind enough to explain to me how to add buttons or assign functions to the buttons?
secondly, because i allow free-text for the user to key in ABAP codes, is there a function to check the syntax of the codes entered by the user?
i'll reward handsomely for any help rendered and it will be better if you could include sample codes as well(:
thanks!!! (:
SAMPLE CODE FOR TEXT EDITOR:
IF CODE_EDITOR IS INITIAL.
    CREATE OBJECT CODE_EDITOR_CONTAINER
       EXPORTING
         CONTAINER_NAME = 'GEN_CODE'
       EXCEPTIONS
         CNTL_ERROR = 1
         CNTL_SYSTEM_ERROR = 2
         CREATE_ERROR = 3
         LIFETIME_ERROR = 4
         LIFETIME_DYNPRO_DYNPRO_LINK = 5.
    CREATE OBJECT CODE_EDITOR
      EXPORTING
        PARENT = CODE_EDITOR_CONTAINER
        WORDWRAP_MODE =
        CL_GUI_TEXTEDIT=>WORDWRAP_OFF
          CL_GUI_TEXTEDIT=>WORDWRAP_AT_FIXED_POSITION
        CL_GUI_TEXTEDIT=>WORDWRAP_AT_WINDOWBORDER
        WORDWRAP_POSITION = G_EDITOR_LENGTH
        WORDWRAP_TO_LINEBREAK_MODE = CL_GUI_TEXTEDIT=>TRUE.
ENDIF.
Edited by: Leslie Koh on Jan 18, 2008 4:28 AM

Hi Leslie
There is a abap key word which may help your purpose to do the syntax check. Please check the key work "SYNTAX-CHECK FOR itab " to be more in details,
Basic form :
SYNTAX-CHECK FOR itab ...MESSAGE f ...LINE g ...WORD h.
Extras:
1. ... PROGRAM f1
2. ... INCLUDE f2
3. ... OFFSET f3
4. ... TRACE-TABLE itab1
5. ... DIRECTORY ENTRY f4
6. ... REPLACING f5
7. ... FRAME ENTRY f6
8. ... MESSAGE-ID f7
9. ... ID id TABLE itab2
10.... SHORTDUMP-ID f8
11.... FILTER f9
This syntax will help you to check the syntax errors of ABAP program passed as internal table. You can get the entries keyed in by user in editor control through class method CL_GUI_TEXTEDIT->GET_TEXT_AS_R3TABLE in your PAI.
Hope this helps !
Kind Regards
Ranganath

Finding Hard coded Text in ABAP program

Gurus,
Is there any method to find out Hard coded TEXT in an abap Program? For Example
write:/ TEXT-T01,
'Hello World',TEXT-T02.
In which i need to find out Hello world which is inside ''. I am not able to find with Search command.
Can you Please guide me,
Regards,
Lijo Joseph
Message was edited by: Lijo Joseph vazhappilly

try this.
data: report_pg type SY-REPID ,
rpt_source type standard table of D022S .
REFRESH rpt_source .
move: <rpt name> to report_pg .
READ REPORT report_pg INTO rpt_source .
now do a search/find in rpt_source.
Regards
Raja

How to get the field texts from abap dictionary into screen Text fields

Hi SapAll.
here i have got to modify one zscreen by adding 1 more field,when i added one field in teh screen by just writng the code in program as SELECT-OPTIONS ilart FOR CAUFVD-ILART.
but iam unable to get the field text for the text field from teh table CAUFVD.
CAN ANY BODY HELP ME IN THIS.
regards.
varma

Hi Varma,
Even if you want to personalise the Text also you can do without checking the DICTREF checkbox. Dirctly you can give the text in the Text elements by using the Menu GOTO -> Text Elemetns -> Selection Texts.
Regards
Thiru

How to get Leave Request text in ABAP HR

Dear Expert,
I am using BADI PT_ABS_REQ to validate leaves applied on portal.
Here I am getting ITEM_ID for the leave request, but I need leave request_id for leave text.
Also I want to update the timing of leave manually, based on the Leave applied (Exp First Half/Second Half).
Thanks.
Regards,
Hemendra

The text i think you are referring to is in table PTREQ_NOTICE. The key is REQUEST_ID.
Edit : Sorry misunderstood the question. You can get REQUEST_ID from PTREQ_HEADERS where ITEM_LIST_ID equals ITEM_ID.
Edited by: Pedro Guarita on Apr 13, 2011 3:23 PM

Displaying Russian commented text in ABAP program

Hi Experts,
I have one program in which comments are in Russian and in one system those commented text is being displayed in Russian after after choosing Cyrillic from Character set of Customizing of local layout option while in an other system same commented texts are displayed as junk characters even after choosing Cyrillic from Character set of Customizing of local layout option.
Example :
In 1st system, russian commented text is displayed correctly as follow
DATA: YEAR_AFABG(4) TYPE N. " Год даты начала амортизации
while in 2nd system in which code comes from the 1st sytem, russian commented text is not displayed in russian and displayed as junk characters as follows -
DATA: YEAR_AFABG(4) TYPE N. " Ãîä äàòû íà÷àëà àìîðòèçàöèè
Can anybody help me on these ? Any help would be highly appreciated.
Thanks in advance,
Akash

try this.
data: report_pg type SY-REPID ,
rpt_source type standard table of D022S .
REFRESH rpt_source .
move: <rpt name> to report_pg .
READ REPORT report_pg INTO rpt_source .
now do a search/find in rpt_source.
Regards
Raja

API for access of guided procedure from ABAP / WebDyn: change/read status

Hallo together,
I'm very new to guided procedure and have some questions about possible interaction between WebDynpro ABAP and Portal guided procedures (UWL ?)
is it possible to access a guided procedure or their attributes from WebDynpro ABAP? What are the relevant key attributes (ID's) to do so?
Is is possible to change the status of a guided procedures f.e. from "completed" to "ready" from outside, let say WebDynpro ABAP? for the purpose of a monitor for mgrs.
- possible szenario is a manager says: "no, not well done" go back to start and do it again !
- another szenario: guided procedure is "running" and should be set to "completed"
Any hint will be helpfull
Thanx very much in advance
regards Hans

Hi Hans,
There is a good and a bad news regarding APIs for GP and ABAP Web Dynpro and GP:
The good news is that you can find [here|http://help.sap.com/javadocs/nwce/current/gp/index.html] the APIs for GP.
The bad news is that the cooperation capabilities between GP and ABAP Web Dynpro are restricted in a certain way. One can use a ABAP Web Dynpro in GP as callable object, but GP is only capable to transport parameter values from GP to the UI but not vice versa. In many cases one needs a solution where the ABAP Web Dynpro UI accepts user inputs and forwards them to the GP context. This is not supported.
Regards,
Jan

Bigger text in ABAP webdyn

Similar Messages

Maybe you are looking for