BIGGGG PROBLEM PLZZZ HELP!!!!

k i baught my nokia n73 a month ago i live in canada and my phone is not supported here i forgot my password the security code that locks the phone after im done working on it,, i set it to lock after 3 min ne ways i called my provider they cant help because im in canada i also called nokia canada and they also cant help and i also asked the place were i baught my nokia from they cant help me i dont know what to do i changed the code it was factory setting which is 12345 but now its something else that i cant remeber i cant get past opening screen it is requeting security code, some people told me to flash the firmware but i dont think i can because if im going to connect the usb im gonna need to activate the pc suite from my phone so i dont know can ne one help plzz my phone has been like this for almost a month now. i have the original package the phone is not stolen. thxMessage Edited by nadim_k6 on 12-Nov-2006
02:00 AM

To flash it i will need to take it to a nokia service center? or can i do it myself because i dont think theres any nokia service centers here in Canada that supports my phone. i dont care if all my data in the phone are gone because i need to use the phone its been locked for 3 weeks i cant call i can only recieve calls.Message Edited by nadim_k6 on 13-Nov-2006
06:04 PM

Similar Messages

HT2573 I am using macbook pro with update of 10.7.5...I am not able to authorize my digital signature. It is showing crypto service provider is missing. I am in a big problem. plzzz help me out....thanx

I am using a mac book pro version 10.7.5..I am not able to authorize my digital signature.It is showing crypto service provider is missing. I am in a big problem . plzzzz help me out. Thanks

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Server/problem plzzz help

hey guys am new in JSP i had just mad simple apps that in 1st page u enter ur name then 2nd page it says hello name
but after i click on button okay in 1st page i got this
the Server encountered an internal eror() that pevented it from fullfilling the request.
and gives me exceptions
what does this mean and what should i do!!!

To debug the situation, you can try the following:
- Check the server logs for more detailed messages.
From the runtime tab, select the server in question, right-click and select 'View Server Logs'. If this menuitem is not present in the ide version you are using, you may need to check the log from the server's admin console.
- Check the ide log file to see if there are any messages and/or stacktraces.
The log file for the ide is found in <userdir>/var/log/messages.log file. To find out <userdir>, please take a look at http://blogs.sun.com/karthikr/entry/jse_directories
- Debug the project within the ide. (Right-click project and select debug project).
If you need help, please post any error messages you find in log files along with information on your project, server being used etc.

Packages problem plzzz help

I have a sourcecode with the package hierarchy as package1.package2.something. Can anybody tell me how can i change the whole package into package3.package2.something nd compile it ? how can i do this ?

I have a sourcecode with the package hierarchy as
package1.package2.something. Can anybody tell me how
can i change the whole package into
package3.package2.something nd compile it ? how can i
do this ?Find the statement
package package1.package2.something;
replace it with
package package3.package2.something;
and compile. Such things could be done much easily with an IDE.

Plzzz help me Jumping because of the antenna in iphone 5s

plzzz help me >> Jumping because of the antenna in iphone 5s
plz help me i from irann 2day ago Jumping because of the antenna

Hi there , I bought the phone a month then suddenly jumped up and went to the phone antenna antenna on a search and did not even put my sim card out and then I had a message and phone repairman and he took the Restore and Restore to error -1 and the other came up and now I do not know what is in dfu yo I do not hit the phone rather then the water went into the antenna settings modem firmware was empty . now says have a problem , anyone who has 'm handset , and the repair of put kept base -band phone. No way that 's true ? I 'm from Iran and the Persian language, I typed into Google translate to English mistake, please help me if you can
iphone 5s 16 gb me34LL/A
<Personal Information Edited by Host>

Integration problem plzz help

HI,
to all experts.
i am facing a problem..plzzz help
we have several different modules which are .ear file..
now we have to combine those modules into one a big application,and we want to add new modules also..this is one task..
the other one is,we 've already delivered some modules to client.now the client want to update his application by adding the new modules .he doesn't want to change his entire application.
those modules r in ear format.
we have to develope an executable which detects already existing modules and it should add the new modules..
the technologies what we used is Jsp,servlets...ant
what we r going to use is ejb3.0,ant,other tech like xml also..
Any ideas how to do,
Thanks

Restart. If that doesn't help, re-install. Your JVM installation can't access its rt.jar.

Urgent.. JSTL problem. plz help

I need some help with JSTL string comparison. Plzz someone help!
I am retrieveing values from an xml file and checking for equality between two strings. Even though the strings are same it does not go in the if condition where I check for equality. I am able to retrieve the correct value from xml and also it is same because I am dispalying the values but its comparison is false. Could someone tell me a possible reason for the same.
Plzzz help..I am stuck up with this problem since quite long and not able to get a solution.
this is the code where I compare
<c:out value="${d} : ${e} : ${d == e}"/>
the output i get is
[name="ROSS"] : [name="ROSS"] : false
I even calculated the length of the string ..that too is same 4, 4 ! So I do not think there are any blank spaces.
Plzz help!
Thanks a lot!

It looks like you are comparing two objects that both have a toString method that returns the same value. Doesn't mean the objects are equal.
what are d and e?
if they are objects I'm not sure the best way to compare the two values...
perhaps add a getValue method to the object and then compare {d.value==e.value}

Iphone 4 dictation problem plz help

hi frds im new to iphone 4 [ios5 ] i bought iphone 4 from my frd .what happen is after changing my langugae settings iphone is restated all felds are all most compled at last step it asking to WHEN YOU TAP THE MICROPHONE BOTTON ON THE KEYBOARD WHAT YOU SAY WIIL BE CONVERTED TO TEXT DICTATION WORKS WITH ANY APP WITH A KEYBOARD ... here the msg came .. and next button is not higliting .... plzzz help me out this prblem ...what to do .....

sryy srry bro bt here iam frustaed to that msg tats y .. actually i bought iphone 4 yesterday ... today when i change my langugae english to british english it rebooted and iphone setup appered on screen ..when i connected to wifi i click to next on top right and a msg came WHEN YOU TAP THE MICROPHONE BOTTON ON THE KEYBOARD WHAT YOU SAY WIIL BE CONVERTED TO TEXT DICTATION WORKS WITH ANY APP WITH A KEYBOARD... so i unable to proceed further setups... i haven't seen a microphone on keyboard ..this is my problem what to do now plzz help mee

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

IPod Mini Problems Please Help

This is my second post of the type... no one replied to that so im hoping someone could help me.
Problems:
-Wont Update or Load Songs
-It starts loading, gets to around the 5th song (out of well over 600) and says "Ipod Update Complete, OK To Disconnect" though nothing is on the iPod.
-Occasionally wont restore to factory settings.
Okay, before you suggest the five R's, ill note that ive put several MONTHS into this, and ive tried them well over 20 times in order.
Things Tried
-5 R's Repeatedly (as noted above)
-updating on a friends computer (several times with no luck, same problems)
-requested help over the phone
-The number i called was the Apple US Help Line, which the person helped me for about an hour before he said he did not know what was up, and transfered me to the Canadian help line, where they demanded a large sum for help, which i could not pay (under 18).
-When i first noticed the problems, I sent it in (around the end of december)and problems continued upon arrival of the new mini.
I will also note that my sisters iPod Nano works perfectly fine, no problems, as well as my friends iPods adding songs from my computer.
Please please help... im currently resorting to a crappy CD player that skips for my music... and have been... its starting to break me inside.
Thank you,
Milan

Natalie,
If you have your iPod set to transfer your music manually, then that do not disconnect message will continue to be displayed on your iPod until you manually eject it.
You can do this by clicking on the little eject icon next to the iPod listing in the source window of iTunes, or right click on it and select eject. Another way would be to use the safely remove hardware icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject.
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked enable disk use, remove it and your iPod should automatically disconnect after its finished transferring music.
For the iPod to automatically open iTunes, you have to have "open iTunes when this iPod is attached" checked.
Go to edit/preferences/iPod to do this.
If you prefer to keep the iPod set to manual transfer, look at this. In fact, the whole tutorial is a must read.
Managing Your Songs Manually
iPod Tutorial
iTunes Tutorial Windows

Apps store wont let me download free app due to previous purchasing problem? help!!

apps store wont let me download free app due to previous purchasing problem? help!!

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill ? If it's not then that might be the reason that you are getting the security code error : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

I am trying to send minutes of a meeting to pc users by clicking on export and choosing the word option. Recipients are unable to open them saying they came as a ZIP compressed folder. No idea what that is or how to correct the problem. Help!

I am trying to send minutes of a meeting created in Pages to pc users by clicking on export then word. Recipients are telling me they cannot open the minutes which have come as a ZIP compressed folder. I have no idea what this is or how to fix the problem. Help?!

A pc user can open a .zip file by double clicking it.
If that does not work, you can convert the document to a .pdf by doing the following.
With the document active, type commannd + P (the print command).
In the next screen, on the bottom left, click on PDF, and in the drop down select Save as pdf...
You will be asked where the .pdf should be saved - the desktop is the easiest.
Now when you want to send the minutes, you have them as a .pdf file. Anyone with Adobe Acrobat Reder can open this.

Report problem plz help

hi to all
Using form6i and run in client server. i cant solve this problem please help to all master :
I have a text item in forms and button. When i type the Customer_Name in text item then all names appears in reports, i want that when i type the name, only that name will appear .
Please check what is wrong with my code and steps.
In report wizard, query statement i put "Select * from S_customer"
then i call the report in forms..
Report Property pallette:
Other Parameters=Customer_Name
Query names=Select * from s_Customer where Customer_Name=:rep(the text item)
then in forms the button trigger is when button pressed.below is the code:
declare
v_Rep varchar2(100);
repid report_object;
Begin
repid := find_report_object('report');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,’s_customer=’||:Dept.rep);
v_rep := run_report_object(repid);
end;
advance tnx to all

Hi,
You need to bulid a parameter list.
This is a code sample to run a report from Forms:
(Place it on a button when-button-pressed trigger, to run the report).
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status VARCHAR2(20);
-- this is the parameter list
     pl_id ParamList;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
-- try to find the parameter list
pl_id := Get_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
               -- if parameter lsit does not exist
               -- create it
          pl_id := Create_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
          Message('Error creating parameter list '||pl_name);
          RAISE Form_Trigger_Failure;
          END IF;
          ELSE
          Message('Parameter list '||pl_name||' already exists!');
          -- destroy it to clear old parameters
          -- and create it again;
          destroy_parameter_list(pl_id);
          pl_id := Create_Parameter_List(pl_name);
          END IF;
Add_Parameter(pl_id,'p_customer_name',TEXT_PARAMETER,:customer.cust_name);
-- add as many parameters as needed
-- finally run the report passing your parameter list
     repid := FIND_REPORT_OBJECT('report4');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
               Exception
                    when others then
                    Message('Error running report. '||sqlerrm, acknowledge);
END;
Also, you need to create the parameter in your report:
1.- Open your report on reports builder.
2.- Find the "Data Model" node, and the "User parameters" node.
3.- Create a parameter: p_customer_name
4.- Modify your sql from:
Select * from S_customer
TO:
Select * from S_customer
where Customer_Name=:p_customer_name;
If you want this parameter to be optional, check the reports online help on "Lexical References".
Have fun,
Hugo

I have a iphn 3gs running on ios 6.1.3 i buy it frm my frnd ..........n it has one prblm that safari mail n maps does't wrk it crashes all time when i try to run these ......plzzz help me what shoud i do ......i have tried reset many times bt it does't

i have a iphn 3gs running on ios 6.1.3 i buy it frm my frnd ..........n it has one prblm that safari mail n maps does't wrk it crashes all time when i try to run these ......plzzz help me what shoud i do ......i have tried reset many times bt it does't

use a computer and restore the phone http://support.apple.com/kb/ht1414

Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me out

Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou

no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner

BIGGGG PROBLEM PLZZZ HELP!!!!

Similar Messages

Maybe you are looking for