Bill in credit after leaving network

Hi  I keep recieving a bill saing my account is in credit after leaving. How can I claim this money back? Regards Paul

Hi there PaulMCC
All you need to do is to contact Customer Care at 1890 808 585 where they will take your bank or card details and process this request
-Kyle

Similar Messages

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • HT1918 I deleted my credit card from my account but iTunes company is still trying to bill my credit card.  Why is this and how can I delete my iTunes account ?

    How do I get iTunes to stop billing my credit card after I deleted my credit card on my account and how do I delete my iTunes account.

    You can't delete an iTunes account, all you can do is remove personal info from it and stop using it - any items that you downloaded with the account will remain tied to it.
    Have you got any auto-renewing subscriptions : http://support.apple.com/kb/HT4098 ?
    And/or any pre-orders : http://support.apple.com/kb/HT5714 ?

  • HT204053 First time to use apple ID at iTunes and I was asked to enter billing information. After I did, it shows a message "contact iTunes support". What should I do?

    New iPhone user here. I registered an Apple ID and tried to use it at iTunes. I was asked to enter billing information. After I did that, it shows a message "contact iTunes support". Same message appeared even I tried different credit cards even Paypal. Need help! Thank you.

    http://www.apple.com/support/itunes/contact.html

  • HT204088 How long does it take to get a response or a credit after you 'Report a Problem' of a charge not being correct?

    How long does it take to get a response or credit after you 'Report a Problme' w/ something billed to your account incorrectly?

    Try again...  you should get a response within 24 hours.
    Use the email form here >  Apple - Support - Mac App Store - Contact Support

  • Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    Try:
    - Another cable
    - Another USB port
    - Reboot the computer
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Duplicate Outputs proposed in Billing Document unexpectedly after 3 months

    We are facing a weird problem in some of our billing documents. After the billing document has been saved and the EDI output ZEDI issued, some days later (or even some months later), 2 or 3 duplicate outputs have been proposed (automatically ?) and the IDOCs also have gone out of the system. But the status of the duplicate outputs remain in "Yellow" status and their Processing Log does not contain the new IDOC #s but the original IDOC # that was sent first.
    We are at a loss to determine root of issue, Users don't remember changing the billing documents at these times but even if they did, the "Multiple Issuing" checkbox is not selected in the Output Type "ZEDI" and hence, outputs should not have been proposed.
    Has anyone faced such an issue before ?
    I have tried to paste some logs below:
    Output Screen:
                  Output     Description Medium     PF     Part#     Language     Proc Date          Proc Time     Date/Tim
    duplicate ZEDI     EDI Invoice     EDI     BP     266     EN                    00:00:00     4
    duplicate ZEDI     EDI Invoice     EDI     BP     266     EN                    00:00:00     4
    duplicate ZEDI     EDI Invoice     EDI     BP     266     EN                    00:00:00     4
    original    ZEDI     EDI Invoice     EDI     BP     266     EN     05/13/2010     00:56:37     4
    When I do a "Determination Analysis" in Output Screen for this faulty billing doc, I get the following..
    Z1EX     502     Output ignored (requirement 962 not fulfilled)
    Z1PA     502     Output ignored (requirement 962 not fulfilled)
    ZCRE     540     Output not found
    ZED2     524     Access not made (initialized field)
    ZEDI     541     Output found
    ZLDO     540     Output not found
    The NAST entries for these outputs are follows:
    Object key     Message type     Message partner     Created on     Created at     Message manually     Processing date     Processing time     Response date     User name     Processing status     Output Device     Spool request name     Suffix 1     Suffix 2     Automatic     Recipient
    92494146     ZEDI     266     5/13/2010     0:56:37          5/13/2010     0:56:37          BATCHADM     1                         X     
    92494146     ZEDI     266     9/9/2010     8:45:26     X          0:00:00          5ECND6     0     AdobePDF     84526     MPDF     20100909     X     5ECND6
    92494146     ZEDI     266     9/9/2010     8:46:09     X          0:00:00          5ECND6     0     AdobePDF     84609     MPDF     20100909     X     5ECND6
    92494146     ZEDI     266     9/9/2010     8:59:20     X          0:00:00          QZL49N     0     AdobePDF     85920     MPDF     20100909     X     QZL49N

    Hi,
    I am getting the same issue. Did you solve this issue? If yes, please share your solution.
    Best Regards,
    Mayank Malpani

  • PDF video continues playing after leaving page

    Hi all,
    When I publish a video as a PDF, it plays through Adobe smoothly. However, when I click on a hyperlink within the PDF video linking to Youtube or somewhere externally, the PDF video keeps playing causing 2 audio stream overlapping.
    Is there a way to pause the Captivate PDF video after leaving the page to watch a Youtube video via hyperlink?
    Thanks in advance!

    Use an FLYPlayback component to stream the video and when you are about to leave the frame execute its stop() method

  • Cash bill and credit bill

    Hi Experts
    client want separate report and transaction for cash bill and credit bill
    so can do separate sales document type and billing document type  to map above requirement
    e.g. Z1OR  and Z1F2  for cash bill
          Z2OR  and  Z2F2  for credit bill
    if customer pay in cash they will use Z1OR
    if customer want thr credit they will use Z2OR
    is it right solution ?
    please suggest
    regards

    It depends on how your delivery document should be generated.
    If for cash sales, if you want delivery document to be generated automatically in the bacground once sale order is created but not for credit sales, then you should have two sale order types. 
    Otherwise, it is not necessary to have two order types. Also it is recommended to have two billing types for your requirement but again it depends on the process how it is going to be.
    If you are asking whether it is required only for reporting purpose, then I can say, yes you can have one billing type.  But I am sure, Payment Terms and Inco Terms should be different for these scenarios and that is why, I said to have two billing types.
    thanks
    G. Lakshmipathi

  • Failback after "Protected Network" failover in Hyper-V

    Hi everyone
    I have a two node hyper-v cluster on Windows Server 2012 R2. I use "Protected Network" feature combined with LACP teaming at the Hyper-V level. Protected Network works fine, it meens when network connection of
    a particular VM is broken, the Live Migration begins and VM starts working on a second node.
    The problem is with a failback action. In the VM properties I have set the preferred owner and I allowed failback immediately. After loosing a network connection Protected Network feature migrates the VM to a second node (not preferred).
    But after the connection is reliable again on the first node, the failback does not happen. When I for example restart a Cluster Service on the first node, then all VMs are migrated to a preferred nodes. Failback also works fine after restarting
    one of the nodes. It does not work only after Protected Network failover.
    Do you think failback is possible with Protected Network feature?

    Hi Konrad,
    First , my apology for the delay .
    I built the cluster for this test and I configured a HA VM to allow failback immediately and preferred owner but it only applied to node failover .
    (I unplugged the cable to trigger failover for that VM but it didn't failback after I plugged the cable back )
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • After a network interrupti​on, my photosmart 7510 prints pages with a "d" on them.

    After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

    Hi rosegirlmom,
    Does this only happen when the router is reset?
    Why is the router getting reset?
    Have you tired using a different router to see if this stops the issue?
     Restore Network Defaults:
    On the printer control panel, touch the Wireless icon ( ).
    Touch Settings .
    Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
    Touch Restore Network Defaults .
    Touch Yes to confirm your selection.
    Restart the printer, and then connect it back to your network.
    You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
    Let me know what happens?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Lumia 800 crash problems after running Network Set...

    Hi!
    Long post coming up but if somebody at Nokia reads and makes sense of it and a fix comes about then it'll have been worth it.
    Phone: Nokia Lumia 800 (sim free)
    Firmware: 11500
    Location: UK and Ireland
    Since I got my Lumia 800 (November) I've been traveling between UK and Ireland a lot.
    The phone works fine in the UK but in Ireland, when I put in my three.ie sim the phone keeps crashing during network related operations such as coming out of flight mode or reading/replying to a text message.
    It's not a dodgy sim because this is the third one (I get a new payg sim each month) and this problem has occurred throughout.
    At first I noticed that I could not configure the phone where MMS and internet data worked at the same time. If I added the 3internet APN then data worked but MMS didn't. If I deleted the APN then MMS worked but data didn't.
    Another problem with this phone in Ireland was that it kept crashing whenever I took it out of flight mode. Again, this did not happen in the UK with my UK (Three network) sim.
    As this has been happening from the first days that I got the phone I've been looking for a solution/workaround the whole time and I remember one of the first bits of information I found was somebody suggesting that the phone worked fine with the first sim inserted (which in my case was the UK sim). That stuck with me and when the Network Setup app (from Nokia) appeared I thought "ah! this makes sense, now I should be able to switch sims".
    Unfortunately the app did not fix the problem of not having a unified network configuration for data and MMS.
    This week I bit the bullet and reset the phone with the Ireland sim inserted. O...M...G...!!! Internet data AND MMS now work (in Ireland) and I have not gone anywhere near the APN configuration.
    I used the phone for an hour surfing, checking emails, sending texts and MMSs, all was good.
    Then I thought about the Network Setup app and wondered what it would do, so I ran it. The very next incoming text message crashed the phone! Then I rebooted and found that internet data did not work.
    Next I repeated this process. Reset phone with three.ie sim inserted, checked that internet data and MMS worked (they did), ran Network Setup, internet data no longer worked, opened an incoming text...it didn't crash.
    So, not a reproducible problem
    Next test: flight-mode toggling. This one IS reproducible.
    Location: Ireland
    Sim: three.ie
    Fully reset phone.
    Before running Network Setup: flight mode toggles=20, crashes=0
    After running Network Setup: flight mode toggles=20, crashes=12
    Fully reset phone again.
    Before running Network Setup: flight mode toggles=20, crashes=0
    After running Network Setup: flight mode toggles=20, crashes=11
    Fully reset phone again.
    Before running Network Setup: flight mode toggles=20, crashes=0
    So now I'm not going to run Network Setup, I'll head back to the UK on Friday and see if my phone continues to work properly with my UK sim.
    Hope this helps somebody
    Matt
    [Edit]
    Oh poop!!
    Phone just crashed when coming out of flight mode and I have not run Network Setup.
    MMS and internet data are working though so I'll just not use flight mode at night...or on planes

    > Try moving closer to a window, or even going fully outside
    Oh it's sooo tempting to click "Accept as solution"  
    But yes, one day, one day soon, I will go outside.

  • HT201359 I have over $25 left in i-tunes gift cards balance yet the store keeps trying to bill a credit card. Why is it not accessing the gift card balance?

    I have over $25 left in my i-tunes account from i-tunes gift cards. However the system keeps trying to bill a credit card rather than accessing the gift card balance first.  Anyone have a similar problem or have some advice?

    Either you're trying to gift content, or the iTunes Store servers are checking the validity of your account, or there's a problem on Apple's end.
    (98232)

  • With the do not track feature checked I still get ads from sites visited soon after leaving these sites. What to do?

    I have checked the box for do not track but get ads from sites visited after leaving these sites. These ads run parallel on the Yahoo home page. What I can I do about this?

    That feature relies upon voluntary compliance to your preference by websites.
    https://support.mozilla.com/en-US/kb/how-do-i-stop-websites-tracking-me

  • HT4859 does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

    does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

Maybe you are looking for

  • Error message when trying to play/charge via dock and home stero

    My new Nano 5G will play via my stero when I hook it up through my "older" dock. However, I get an error message stating something about the accessory not being supported and it won't charge while in the dock. I noticed the older flat plug that that

  • Request Message Mapping Problem

    Hello friends, I am working in XI 2.0 and my senario is sap R/3->XI->File Adapter I take an idoc from the SAP R/3 system. and that comes properly to XI. I already created Data type, Message Type, Interface Type, Message Mapping and Interface Mapping

  • Station is not receiving an IP address from DHCP

    Hello guys, I have an ASA 5505 functioning as a router to connect to the Internet. Also, it is my DHCP server for my clients, and APs. When I connect my laptop to the ASA, I get an IP address and able to configure my WLC. The APs also receives an IP

  • Problem with Leopard re-install

    I have a G5   (10.5.8) that was running slowly.  I've done very little to is for 6.5 years but use it.  I tried various clean-up utilities...but still slow.  So, I decided to re-install the Leopard OS and start fresh. I selected the option to save th

  • Do I need to download hp eprint to print from my phone to my eprinter

    Do I need to download hp eprint to print from my iphone to my eprinter?