Bill of lading date entry in MIRO transaction

Hi,
My scenario is as follows,
When doing import purchase, there will be invoice verification for the material against PO. During this (MIRO Posting) system should automatically consider exchange rate as per bill of lading date.
Our client wants to enter the bill of lading date in the system (MIRO screen) at an apporpriate place.
Could anybody guide me where i need to put the bill of lading date in "MIRO" transaction.
Suppose i will put the bill of lading date in Baseline date field whether system will calculate the bill of exchange rate based on the baseline date field?.
Thanks
Rifaie.M

The exchange rate is as on the posting date. If your BOL date and invoice date are same, then system will consider the respective exchange rate.

Similar Messages

  • Make purchase order lineu00B4s posting date visible from miro transaction

    I have tried to add purchase order line´s posting date from "spro-Materials Management- Logistics Invoice Verification-
    Incoming Invoice- Maintain Item List Variants" but I can´t.
    Is it possible?
    Thanks in advance.

    I just checked and you're right.  Amazing the posting date isn't included as std.
    This might help, you'll need a development.
    Screen Exit for MIRO transaction
    (If you want a screen variant based on existing available use tx OLMRLIST)
    Regards

  • How to clear previous data entries in sm30 transaction for table maintainen

    Whenever i maintain 8-10 records in sm30 for table maintenanace  and again when  I go to SM30 for entering new records i am able to view previous entries .
    then i click on new entries where data is cleared.
    Now what i need is i want to clear the data before clicking  "new entries".
    means for user it should appear as a fresh screen.
    is it possible if yes HOW?
    please anyone suggest me  way to do it immediately

    hi Nilesh,
    when u r clicking new entries data is not cleared but u r going to other screen,so it will apppaer as blank screen.If u want to delete all the records ,then write the logic in ur code.
    CASE SY-UCOMM.
    when 'NEWENTRIES'
    USe delete dbtable statemnt...then commit work.it will delete all the entries.
    ENDCASE.
    regards,
    Nagaraj

  • Invoice vouching with Bill of Lading

    My customer is looking to do invoice vouching by leveraging the bill of lading option in the MIRO transaction.  I understand that to use this option, I must use planned delivery costs.  My customer doesn't want to do this either.  So, we want to leverage the delivery note field.  But, standard SAP populates this field with the inbound delivery number.  If we populate the delivery note field with the bill of lading number will this cause any other issues for us in any other areas?  Thanks for your help!

    Hi Ben,
    You can enter transport vendor in GR instead of entering it into the PO conditions. For that you need to find out conditions for which you want to maintain transport vendor. Then in M/06, enter value 2 in field 'Vendor in GR'. Then you can remove transport vendor from the PO condition. At the time of GR, enter transport vendor. Please note that if there are 2 transporters, you shouldmaintain 2 conditions in PO (one for each transporter). Then you can verify invoice in MIRO using bill of ladding.
    Hope this helps.
    Nikhil

  • Bill of Lading & Letter of Credit form names

    Hi Everyone,
               Can you give the SAP standard form names for Bill of Lading and Letter of Credit?
    Regards,
    Sugopa

    If you are looking for field names .
    Bill Of Lading - Data element BOLNR ( For ex LIKP-BOLNR )
    Letter of Credit - Data Element GM_LETTER_OF_CREDIT
    ( For ex GMGR-LETTER_OF_CREDIT ).
    Sapscript for Bill of Lading -
    SD_SHIPMENT_CMR

  • Reg Bill of lading

    Hi all,
    I have an requirement to grt Bill of lading data(BOL) for a delivery(likp-vbeln). I noticed BOl maintained in LIKP table but no values updated. Can any one let me know where can i fetch the data of BOL?
    Also i need to know the tables related to Invoice created with respect to the ASN no?
    Thanks in advance,
    Sashti

    In delivery at header level, there is a tab "Shipment", where you can see the field (Field name BOLNR) BillOfLad.  You can make use of this.
    To correlate this with billing document, you need to table join LIKP (for bill of lading number) and VBRK
    (for billing reference - field VBELN)
    thanks
    G. Lakshmipathi

  • WM: Confirming TOs in Mobile Data Entry

    Hello,
    I am having a business requirement where transfer order should be confirmed with alternative unit of measure instead of base unit of measure. This can be done nicely in LT12, but we want to use Mobile Data Entry. In transaction LM06 I can't find possibility to confirm the TO in alternative UoM...
    Any ideas if I am missing something in customization of MDE or is this even possible with standard MDE?
    thanks and BR,
    -simo

    > - How system will know when it has to confirm in
    > alternative unit of measure?
    The system doesn't have to know, the user knows. Normally we pick full pallets from the storage, then confirming in base unit (kg) is fine. However sometimes there is need to pick only one piece of material and then it would be easier for the user to confirm picking in alternative unit.
    > - How about if you use WM Unit of Measure..
    I do not want to change this, since most of the time we work in base unit of measure.

  • In MIRO the field Bills of Lading I want to pick PO amt & Del cost

    Hi
    We have a requirement from customer by using miro tcode when they select use bill of lading it shoud pick po amount and delivery cost default it is picking delivery cost.plz give me solution for picking both amounts
    can anyone suggest me an idea can go for badi/ exit or implict enhancement.
    please  give a solution as soon as possibel.

    Hi,
    As of my understanding, you are trying to get the PO Number from the MIRO into BADI. If so, you can get it through Parameter ID like
    'GET PARAMETER ID '<ID>' FIELD <variable>.
    For PO Number field 'BES'.
    In general to know Parameter ID of any screen field, go to technical information from F1 help and know the Data element and Parameter ID will be assigned to that Data element.
    If my understanding is wrong, can you please elaborate your query.
    Regards,
    Vijay

  • MIGO_GR fill delivery note field from manual entry in bill of lading

    I have to fill header field delivery note from manual entry in bill of lading in tcode MIGO_GR for mopvement type 101.
    I searched for the exits and BADI's but header fields are not in changing parameters.
    Has anybody worked on automatically filling the delivery note field in MIGO_GR transaction from bill of lading field or a value from database?

    Hi You can use MB_MIGO_BADI Badi.
    Thanks,
    Anmol.

  • Problem in MIRO agains BILL OF LADING & INBOUND DELIVERY

    Hi GURUS / EXPERTS,
    I am using INBOUND DELIVERY AGAINST PO (VL31N) & POST GOODS RECEIPT,where I mention the BILL OF LADING in SHIPMENT at Header data.  After that I use MIRO, during MIRO, i reference the bill of lading number Which is mentioned in the inbound delivery. But, only the freight and other charges vendors are pulled onto MIRO. Main Vendor (i.e. Material Supplier) is not appearing here.
    Please suggest.
    Thanks in advance.
    DSC

    >
    Devendra Singh Chauhan wrote:
    > Hi GURUS / EXPERTS,
    >
    > I am using INBOUND DELIVERY AGAINST PO (VL31N) & POST GOODS RECEIPT,where I mention the BILL OF LADING in SHIPMENT at Header data.  After that I use MIRO, during MIRO, i reference the bill of lading number Which is mentioned in the inbound delivery. But, only the freight and other charges vendors are pulled onto MIRO. Main Vendor (i.e. Material Supplier) is not appearing here.
    >
    > Please suggest.
    >
    > Thanks in advance.
    >
    > DSC
    Hi Devendra,
    I want to know what are the steps to do the above mention proces. Can you please explain in details.
    Thanks & Regards,
    Mohar

  • Creation Of Custom Transaction For RF enabled devices "mobile data entry"

    Hello Everyone,
    i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
    thanks in advance...
    sapient2006

    Hi Hussaini,
    Here are the steps.
    1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
    2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
    Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
    Regards,
    Anand.

  • Bill of Lading : Forwarding Agent/Carrier data

    Hello,
    On Bill of Lading report no data are displayed in 'Forwarding Agent/Carrier' section.
    Which kind of data do I have to setup to displayed data in this section ?

    This might helps
    You can create a Bill of Lading category for each delivery leg's Ship
    Method/Carrier you use or define one Bill of Lading category for all Ship
    Methods/Carriers. The advantage to having a different Bill of Lading
    sequence for each carrier is that you could easily identify the carrier
    by looking at the Bill of Lading number.
    In addition to creating document categories by Ship Method/Carrier, you
    can tie a category to a specific delivery's pick-up location. This
    provides the opportunity to have a different BOL sequence for the same
    carrier departing from a different location. An example of this would be:
    For a Viking Freight shipment departing from warehouse 1 the Bill of
    Lading number could look like this: WH1-Viking-12345
    For a Viking Freight shipment departing from warehouse 2 the Bill of
    Lading number could look like this: WH2-Viking-54321

  • When i post the invoice in MIRO Bill of lading number not displayed

    Hi,
    When i post the goods receipt i entered the bill of lading number .When i try to post the invoice with reference to the PO ( for which i had done goods receipt) bill of lading number not populated in the corresponding field.I can see the field in MIRO but it is not having the value.

    I have the same issue, did you get a response to your problem. If yes please share it.
    Thanks
    AL

  • How to add a field in data entry section of cat2 transaction

    hi friends,
    i just want to know how i can add one more field in the data entry section of the cat2 transaction.would appreciate if u help me asap.
    thanks,
    sakshi

    Did you solve this?

  • Incorrect Amount displayed in MIRO when ref of  bill of lading

    hi
    when i enter an MIRO with refrence to a bill of lading, the amount that being populated is different to the amount in shipping cost document

    I have the same issue, did you get a response to your problem. If yes please share it.
    Thanks
    AL

Maybe you are looking for

  • Material PO text not copying to Purchase Requisition

    Any assistance would be gratly appreciated... When creating a Purchase Requisition (ME51N) text from the Material Master - Material PO Text automatically copies to the Material PO Text of the Purchase Requisition line item - as expected However, when

  • Signature gets rotated on Landscape PDF after e-mailing

    I'm generating a PDF document using iTextSharp within an ASP .net application. My users are opening the PDF on an iPad, and adding a signature [drawing], then e-mailing the signed document. The signature looks right on the iPad, but once it's e-maile

  • How do i get my sopcast to work after downloading crossover

    I have downloaded sopcast and the crossover software and every program i need with it to run sopcast but sopcast keeps giving me a black screen even though it says it is playing. I read about a famous left- icon button. Is it the double square icon c

  • Is there anyway to change the font used in the Notes app?

    I noticed Notes's font has changed on my iPhone 3Gs (which I don't like). Is there a way to change it back? Thanks, Paul

  • Activation of Query Variable in BI

    Hi All , I am working on Bex report designer  3.x in 7.0 environment .I have activated a variable (Current Calendar month) in business content .However it does not appear in my Query when i try to restrict a characteristic using this variable .Is the