Bill of Lading not generated after chaning Freight Terms.

Hi,
When we are changing in Order Lines, Freight Terms, the Bill of Lading does not get generated. In the database the pick_slip_number, delivery_id etc also does not populated.
I would appreciate if any thoughts on any process we are missing or other suggestion.
Thanks for your help.
Regards,
Sanjay

Hi Friend,
U go to OBB8 as u said and maintain the "Baseline date calculation"
Fixed Days : 7 days
Additional Months : Leave Blank
and default for Baseline date will be the Document date (Invoice Date)
I hope this will solve ur problem
Regards,
Jigar

Similar Messages

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

Billing Doc should NOT generate until you do PGI.....

Hi,
Please help me for the below Scenario:
I have an Issue which is, Billing document should not generate until and unless you do PGI in Delivery.
Can anyone tell me CONTROL PARAMETERS for this issue.
Thanks in Advance.
Raj

Hi there,
Standard SAP willnot allow invoice unless delivery is PGI'ed.
Check the copy control routines in VTFL at header level. Check if the requirement assigned in copy control from LF to F2 is 011 Head.dlv-rel.w/o GI. If yes, change it. 011 will allow F2 to be created without PGI. Change it to 3 which is Header/dlv.-related & try it.
Regards,
Sivanand

Accounting Document not generate after Billing

Dear All,
Billing Documents are saved but after accounting document are not getting generated.
we are getting the following error
*Balancing field "Business Area" in line item 001 not filled*
and billing doc are not releasing to accounting
we have checked in document splitting also all the setting are correct
request to guide on the above said issue
Regards
Kiran

Hi,
Check with your FI Guy, whether Business Area is made mandatory for Accounting Document Type (For e.g. RV) of Billing. Is there any validation maintained for the same in OB28.
If Yes then check whether Business Area for all the line items are entered or not in VF02?
To do so double click on the line item and under "Item Detail" Tab, under "Account Assignment" Sub screen, check Business Area.

Profit center document not generated after creating the billing document

Hi,
I have few billing document for which the accounting document is created, but no profit center document got generated. What could be the reason? The profit center is captured at the account assignment tab of sales order as well as at the item level of Invoice and in accouting document too. The only problem is it has not generated the "Profit center document". Pl help. Thanks in advance.

Hi
When you save the billing document then the accounting document and Controlling document gets generated.
A profit center gets captured and it can be used when we check the accounting document. But make sure that for the G/L accounts profit center is assigned and in your controlling area details also profit center is checked.While configuring controlling then the profit center should also be assigned . to the G/L accounts .So kindly check with the help of your FICO consultant wheather proper assignment has been done or not
Regards
Srinath

Accounting Document not generated after Post goods issue in delivery order.

Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__

Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo

How to create payment term '90 days after Bill of lading + 7 days after...'

Hi all,
I was wondering how you can create this special payment term:
"90 days after Bill of Lading, the calculation of the Net Due Date has to start 7 days after the invoice date".
90 days after Bill of Lading is no problem to create.
The start of the Net Due Date 7 days after the invoice date is a more tricky one.
The transaction code for Payment terms is OBB8.
In the Display View: "Terms of Payment": Details, you can find that the document date is the baseline date (and the start date).
Do someone know how you can change the document date into invoice date ? And if so, how can you add 7 days after the invoice date?
Thanks.
Kind regards,
Pamela

Hi,
thanks for your reply and possible solution.
Unfortunately, i can't change the payment terms to my requirement.
The problem is that I need a variable date (starting from the invoice date, which we don't know yet),
and SAP only allows a fixed date.
If you know how to proceed, let me know.
Thanks in advance,
Regards,
Pam

RE : IDOCS did not Generate after payment run

I have a unique issue. After APP run (ACH) all accounting entries & payment document created corectly. However idoc's for 3 vendors did not generated. There is no issue with configuration as this is not a new vendor and every month payments made off automatically. Vendor complained non receipt of payment after 10 days and I could not find the log for that day. Could anyone please give some hints what could have gone wrong if anyone is expereinced this issue. As I said earlier all config and set up are correct and infact after that one payment is made to that vendor.
Thanks
Ivan

Hi,
Once APP run completed, Vendor open items will be cleared.
You have to create IDOC using WE19.
Run the Idoc using AL11
may be your problem will be solved
Thanks
Chandra

AWR snapsohots not generating after restart of the instance

oracle : 10.2.0.3
OS : Linux 64-bit
Issue : AWR snapshots are being generated after restart of the instance.
I restarted the instance at 31.01.2010 8 AM CST.
SQL> select STARTUP_TIME from v$instance;
STARTUP_T
31-JAN-10
SQL> select max(begin_interval_time) from DBA_HIST_SNAPSHOT
2 /
MAX(BEGIN_INTERVAL_TIME)
31-JAN-10 08.00.04.996 AMto my surprise the AWR reports are not being generated from 8 AM till now 8PM.
What could be the reason ? Do I need to do any thing manual initiation ?
Edited by: [email protected] on Feb 1, 2010 8:41 AM

SELECT STARTUP_TIME FROM DBA_HIST_SNAPSHOT WHERE STARTUP_TIME > TRUNC(SYSDATE);
post results from SQL above

/3M1 and /414 wage types not generated after maintaining IT0582 exemption

Greetings,
I am facing an issue while generating the Annual Medical Reimbursement Exemption wage type (/3M1) and Total Medical Exemption wage type (/414) for an employee. I have referred to previous threads pertaining to this issue and have accordingly performed the following steps in this regard so far:
1. I am using the wage type 9MDR to pay the medical reimbursement amount to an employee through IT0014. Following is the screenshot of V_T7INT9 for this wage type:
2. Following is the screenshot of V_T7INA9 for 9MDR wage type
3. Following is the screenshot of V_512W_D in Evaluation Class 6 section for 9MDR wage type. As per the earlier threads on this topic, I initially maintained the value 10 (Medical Allowance) for Evaluation Class 6 for this wage type. But even in that case, the /3M1 and /414 wage types were not getting generated. As a result, I am maintaining the value 20 for Evaluation Class 6 for this wage type
4. Following is the screenshot of IT582 in which I am maintaining a record in Subtype MDA for this employee:
5. Similarly, following is the screenshot for IT0014 where I am maintaining the amount of Rs.1250 against 9MDR wage type for this employee:
6. Subsequently, I am running the Payroll for this employee for April 2014. Following is the screenshot of EXM table which is the input for INMED function:
7. Following is the output after the execution of INMED function. As we can see, /3M1 and /414 wage types are not generated:
I would request the forum members to share their insights into possible reasons for this discrepancy.
Thanks

Hi
I again checked the table V_T7INT9 table and found that the tax code SMED was assigned to another wage type 9MDA (Medical Allowance) which is used to pay Medical Allowance to employees through IT0008. Following is the screenshot of the same:
I removed this entry and then executed the Payroll. Subsequently I found that the /3M1 and /414 wage types were getting generated. Following is the screenshot of the output after the processing of INMED function:
Thanks for the responses.

Profile not generated after transport.

Hi All,
We are facing an issue in which I transported a role from DEV to PRODUCTION through Q.
Our role is generated in DEV......but not in Q and Production.
As per earlier posts in the forum,I checked table PRGN_CUST in the DEV and PROFILE_TRANSPORT value is set to YES.
Also,the role was added to the transport only after profile was generated
Has anyone faced similar issues?
Peeyush.

Hi Piyeeush,
Did you found a solution to your problem? I have the same issue!
I've created a new role in Dev, created & generated the profile. Once role is transported in Quality, the profile is transported but with the status : Current version not generated.
the strangest part is that i didn't realize that directly... in the meanwhile, the role was already in used in production by a test user who didn't encountered any problem while testing!
basically, the role is now in production, used by one user who can execute all transaction listed in the role... but the profile isnt generated and the user comparison cannot be complete due to that.
any explanations?
maybe i should create a new topic tho

DME Output not Generated after Payment Run in F110

Hello,
I have a typical problem. I have been running the payment run for a Finland Company and I am not able to generate the DME data medium contents in the overview which generally appears for other company.
I have checked the Payment Method for the Country and the Format given there is FI_LUM2. And the Payment Method Workbench is selected instead of the classic payment programs. In the payment method for company code there are no forms available. I just wanted to ask whether it is mandatory to define a form at the company code level in case of a Payment Method Workbench being used in Country payment method?
About the customizing of PMW Payment Medium formats I went to the node Adjust Payment Medium Formats and then checked at standard settings for the relevant format FI_LUM2 and found that payment medium accompanying sheet was not ticked. Could this be the cause.
I don't really understand. Please help me out.
Thanks
Chetan Mahapatra.

Hi,
Run payment through F110 without putting variant name in front of RFFOEDI1.
After running F110, go to SE38 transaction and put all the detail and execute, system will tell you the reason of not generating IDOC.
Regards
K Khatri

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

SAP Query not generated after upgrade

Hi All,
Our client has upgraded from 4.6c to ECC 6.0
In the upgraded server some SAP Queries have not been generatedand others have generated. I wanted to know why all are not generated.
I also wanted to know if any table name exists which maintains query with generated program name
Please let me know your learnings on SAP Query if any
Thanks in advance

These generated program names are stored in AQLDB for local area and AQGDB for global area. Usually these program names will include the infoset names and the query names.

Bill of Lading not generated after chaning Freight Terms.

Similar Messages

Maybe you are looking for