Bill required for warranty?

is bill required for warranty?

You can only purchase AppleCare once and only before the one year warranty expires on the device.

Similar Messages

An accounting document is not required for this billing document

Hi,
While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
Diagnosis:
The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
But the net value is coming in the sales order and alsi into the Billing document.
gurus plz help me.
regards,
ragesh.

Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
Also please check, the posting block is activated. if it is, please remove.
Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
Please let me know, whether ur problem solved..
Reward points if useful..

Table required for billing and RG1 output

Dear all,
pls give me the list of tables required for billing output and RG1 output

Hello Digs,
Just check out these sites and see if this is useful to you
http://www.erpgenie.com/abap/tables_sd.htm
http://www.erpgenie.com/saptech/transactions.ht
<b>**Reward if this helps**</b>
Regards
AK

PAyer information required for 2 million billing docs

Hi Experts
We have around 2 million billing documents for which we would just require following two information.
a) Billing document number (We allready have this list)
b) Payer
It's been difficult to extract this information through table VBRK due to volume of billing documents involved. Could you please let us know if there is any report or easier way to extract this information quickly.
Regards,
Santosh

Dear Santosh
Definitely 2 million billing documents is a huge amount of datas and in foreground, I reckon, you will get a dump error. Instead, go to VF05N, click from top menu bar "Program -- Execute in background", set date and time (should be for night) and save. Next day check the report how it is generated.
thanks
G. Lakshmipathi

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

Need Single Billing Document for Materials and Services in Sales Order

Hello Friends,
I am selling FERT items and DIEN items in the Sales Order.
Document flow as follows:
Finished goods - Order-Delivery-Billing
Services - Order-Billing
In this process 2 seperate billing documents are created
i. Delivery Related Billing document for Finished goods.
ii. Order related Billing document for services.
I want to create a single billing document for both the items (FG & Services) in the sales order.
Please suggest.
Thnx.

Sorry for the delay friends.
Somebody suggested me to make services 'relevant for delivery' to ensure single billing document.
What I did were the following steps:
1. Copy Item Category TAD to ZTAD and make is 'relevant foir delivery'
2. Assign Item Category ZTAD to Sales Order type and Item Cat Group 'LEIS'
3. Go to Deliveries Item Categories and through new Entries add ZTAD. Make ZTAD relevant for Picking.
4. Go to copy control 'Order to Delivery' and insert ZTAD in Item Categories relevant for this combination.
Now when I create sales order with materials and services, they pass over to the delivery document and in the Services item, storage location/plant is greyed out. Only the picking quantity is required to be filled.
PROBLEM :
I am not getting the price of Services item in the billing document.
Billing document copies all line items (tangible and intangible) from Delivery Document
It takes the services item details/quantities etc. to VF01 but the price comes '00.00'
Any suggestions.
Is this legally viable? Someone told me its not legally correct.
Thanks.
Mohammed

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

How to set required for group of condition type in the same condition class

Hello,
we have a group of condition type with the same condition class B, the last one have been set, and all of others will be inactive.
but we don't set any required for all the condition types in pricing control, so if user don't set any of them, the sales order or billing is still saved. that is a risk.How can i fix it? Thanks.
Sophie

Hello,
incompletion log is not available in invoices.
You have different options:
- activate a validation in FI when the Billing document is released into accounting, so that te release into accounting is not allowed if the invoice amount is zero;
- define a subtotal in the pricing procedure as sum of the pricing conditions of your group, then develop a custom routine to be assigned in the formula "CalType" (field T683S-KOFRM) where an error should be raised if the amount of the subtotal is zero (use as an example formula 48);
Best regards,
Andrea

Is it necessary to create a Billing Plan for the Service Contracts

Hi All,
Is it necessary to create a billing plan for the service contracts.
My requirement.
In CRM 7.0, we created a service contract. For the item in that service contract there is a Billing Plan tab.
In that tab we have the dates for Period, Billing Date etc.
Now our requirement is to get the Billing Date quarterly. For this we created date rules and date profiles and assigned these date profiles to header and item level transactions.
And we are able to see the date rules under the drop down of the billing date.
I copied the standard date rule BILL004 to ZBILL004.
But when we changed to our date rule it is not changing to quarterly date.
Can you please let me know what are the configurations to be done for this.
Is the billing plan has to be created for this kind of scenario.
Thanks in advance
Thanks and Regards,
Raghu

Hi
On OK button's action you can Destroy the window and navigate to Page1.
Go through this link for more details and a step by step guide for creation of pop ups and dialog boxes
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1?quicklink=index&overridelayout=true
Hope it works
Regards
Suresh

VAT Tax determination- question about "Requirement" for Table-Is mandatory?

Hi everybody,
I am having problems to determine the appropriate VAT tax percent in some cases in Mexico.
In Mexico for billing at the border with other countries the VAT tax percent is 11% and for billing inside the country the VAT tax percent is 16%. For determine the VAT tax percent the sequence access is MWST and is assigned to the condition type MWST. For cover the border cases we create a table 989 with the fields: Distribution Channel/Plant and VK11 is fill out with this information. With these parameters is possible to determine successfully the VAT percent of 11% at border sales point.
The problem that I have is related to the u201Crequirementu201D assigned to the table 989: Distribution Channel/Plant. This table has assigned a standard requirement number 7- Domestic Business and when billing to a customer with address of MX (Mexico) as LAND1 at general data section of customer master data, the VAT tax percent of 11% is obtained successfully, because all the fields of the table are filled. But when billing to a customer with address of US ( United States of America) as LAND1 at general data section of customer master data, is not possible to obtain the correct VAT tax percent of 11% even all the fields of the table are filled.
I do not know if the problem is the requirement number 7- Domestic Business, but if I change for the requirement 8- Export Business then the opposite is occurring. For US customers the VAT tax percent is determinate successfully and for MX customers not, because the fields of the u201Crequirement u201Care not filled.
So, I am wondering if:
1.     Would be necessary to create a new requirement for combine the 7- Domestic Business and 8- Export Business requirements or exist one like this? I do not need to conditioning anything
2.     What happen if I left in blank the requirement field, I mean if I do not assign anything. I was doing testing for both customers and the VAT tax percent was determined correctly. But I do not know if is correct do not assign a u201Crequirementu201D to the table of the sequence of access MWST.
Thank you in advance for your help!

OK I think I understand but here is where I am at now. I originally created a regulation that requires a license when shipping to certain countries out of the EU. I set the regulation as an Export reg did all the necessary config and was able to assign licenses automatically where needed.
Has I was testing the solution I could not find sales docs or deliveries for some of the materials and finally found out they are being moved on NB PO's.
So I changed the reg to include imports etc., classified with import control class etc. but I am seeing a couple things that don't make sense and tells me my config isn't quite right.
I finally do see that the system at least recognizes the new legal reg in the screening now. before this it had not. But it is still telling me it can't find any relevant country.
The other thing the document itself only shows under Display Existing Export Documents even though in the log it says it's an import document and when I go to the Import log there is no data.
Before I realized there was a note to change the Import to export on transfer I assigned the PO types to export orders and I am thinking that's why they are showing in the export list but I woul have tought that it would say it's an export doc which it doesn't.
Any ideas?

Division wise Separate numbering range required for invoices

Hi Gurus,
The requirement is Division wise Separate numbering range required for invoices. For e.g like 11 Steel Fabrication, 12 Aluminum Fab, 13 Carpentry & Join, 14 GRP/GRC, 15 Stone & Marble
Already a table ZSD_NUM_RANGE with fields like Client, Plant, Number range in the case of internal number assignment
Presently number range is based on plants.
I understand that Division field SPART is to be included in this table by using the exit given below:
User Exit For Billing
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
May I know how far this is feasible to shift plant wise no. range to division wise no. range.?
Also if we do division wise number range, How about shifting to new invoice numbers in the middle of the FISCAL year?
Kindly revert back to me at your earliest.
Regards,
Anbu

Dear Anbu
Ideally speaking, invoice number range should be per plant and the user exit what you had indicated holds good. May be you can try with the same user exit.
thanks
G. Lakshmipathi

Check for warranty

hi
what can i find out and check warranty of my macbookpro?
i bought it 14 days ago and seller said to me you can check and active your warranty with your serial number
i cash 100 $ for one year warranty of exchange
please help me

mohammadreza567 wrote:
No it is New and when i bought it its box was not open or crush
it isnt from anybody
Who did you give $100 to? There is no need to pay for warranty. The warranty goes with the serial number, not the person.
If you are not able to register it online, that usually means that Apple does not have a record of the sale or it has been too long since it was recorded (Apple starts the warranty registration automatically at time of shipment to a store or sale to a person). That happens if one person or a store buy it and then it takes a while before they sell it - that means you need to show Apple that you bought it new. That works if you bought it from a store (reseller); if you buy it from a private person and it has been too long since that person bought it (and the warranty has expired), there is nothing you can do.
Take it to an Apple store and bring your purchase receipt (bill) with you.

What all the prerequisites required for Combined Delivery &Invoice Process

Dear Guru's
Can you please educate me what all the prerequisites required for Combined Delivery Process(VL10A / VL10C) and Combined Invoice Process?
Regards,
Varma

Hi ,
For combined delivery you have to make some settings
In the customer master XD01/VD01 in the shipping tab you have to check the ORDER COMBINATION in the SHIPPING TAB
In the COPY CONTROLS from Order to Delivery in VTAL at the Header you have to maintain the COMBINATION REQUIREMENT as 051
And also the data like
INCO TERMS,
SHIP TO PARTY
DELIVERY DATE
ROUTE
SHIPPING POINT
should be same for all the Orders
To combine the Deliveries into Invoice
you have to maintain the copy controls from DELIVERY TO BILLING in VTFL at the item level as 003
And also certain data like
PAYMENT TERMS
PAYER
BILLING DATE
ACTUAL GI DATE
INCO TERMS
should be same for all the deliveries
Please revert if you need any more
regards,
santosh

Customization settings required for Extenal service managment

Hi,
Till now we are not using External managment , now we want to confifure this , so what are the settings required for this.
regards,
zafar

Hi,
1. If you are selling the Service , Use Material Type u201CDIENu201D and for billing with SD module ,u have to use MM with HR module like (Time & Material ) ie..Expense recording (PR05) then PRRW and PRFI.
2 .If vendors provide service for you and you can procure the service and pay to vendor.
The configuration required are:
2.1. Define organization status for service category
SPRO u2013>MM-> ESM->Service master- >Define organization status for service category
2.2. Define Number Ranges
SPRO u2013>MM-> ESM->Service master- >.Define Number Ranges
2.3. Define Service Category
SPRO u2013>MM-> ESM->Service master- > Define Service Category
& you can do assignment of cost object ( cost center, project, sales order) with co.code with G/L account in OKB9 t.code and in t.code OBYC account assignment of GBB,WRX with G/L.
***After above you can create Master data as Service master AC03
& the transactions are
A. Create PO ME21N (Acc,assment cat. K or P or C as required and item category D) and enter other detail with service master.
B. Create SES w.r.t. PO in ML81N
C. MIRO w.r.t. SES
D. Payment to vendor in F-53
For more Check the link:
http://sapmm.wordpress.com/category/esm/
Regards,
Biju K

How to set a default Billing type for a particular Delivery type

Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
Rajesh

There is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM

Bill required for warranty?

Similar Messages

Maybe you are looking for