Billed line items appearing again

Dear Expert,
We are using SAP 4.6 Version, Delivery has been created with four line items and two line item has been billed and accounting document also partially cleared, when we go for the invoice for rest of the line items in the delivery document, system has given all the 4 line items once again in VF01. that is Already billed line item also coming again for billing, Please clarify the same for sort out this issue,
Billed two line item status shows completly billed, and how does those line items coming for again billing in VF01
Please help us the same
Thanks and Best Regards,
Muralidharan S

Hi Murali,
Please check does anybody cancelled the invoice which created by you before?
and also check what is the status in order for those two item which already billed in the previous invoice.
Regards,
MT

Similar Messages

  • Determine grouping for bill line item

    Hi,
    I am doing some reporting on bills that have been issued (CC&B).
    I can get bill line items from the following query;
    SELECT B.BILL_ID, B.ACCT_ID, B.BILL_DT, B.DUE_DT,
    S.BSEG_ID, S.SA_ID, S.PREM_ID,
    L.*
    FROM CI_BSEG S
    INNER JOIN CI_BILL B
    ON S.BILL_ID = B.BILL_ID
    INNER JOIN CI_BSEG_CALC_LN L
    ON L.BSEG_ID = S.BSEG_ID
    --SELECT A PARTICULAR BILL, FOR EXAMPLE
    WHERE B.BILL_ID = '927321294079'
    --ONLY RETURN THOSE ITEMS THAT APPEAR
    --IN THE SUMMARY SECTION ON THE BILL
    --SPECIFIED
    AND L.APP_IN_SUMM_SW = 'Y'
    However, I am stuck in trying to figure out the grouping area that the line item appeared in in the bill. CI_BSEG_CL_CHAR tells me whether or not the item appeared on the bill, but not the grouping. The information that I need seems to be in the CI_RC_CHAR table, so the problem I am then faced with is how to link together bill line items with the rate component that is the source of the line item.
    Any assistance would be much appreciated.
    ec
    Edited by: 866928 on 12/07/2011 21:49

    I seem to have figured out the join...
    --THE FOLLOWING QUERY GETS FROM BSEG_CALC_LINE
    --TO THE RATE COMPONENT CHARACTERISTIC TABLE
    SELECT * FROM CI_BSEG S
    INNER JOIN CI_BSEG_CALC_LN L ON S.BSEG_ID = L.BSEG_ID
    INNER JOIN CI_SA SA ON SA.SA_ID = S.SA_ID
    INNER JOIN CI_SA_RS_HIST H ON SA.SA_ID = H.SA_ID
    INNER JOIN CI_RS RS ON H.RS_CD = RS.RS_CD
    INNER JOIN CI_RC RC ON RC.RS_CD = RS.RS_CD
    INNER JOIN CI_RC_CHAR RC_CH
    ON RC.RS_CD = RC_CH.RS_CD
    AND RC.EFFDT = RC_CH.EFFDT
    AND RC.RC_SEQ = RC_CH.RC_SEQ
    Thanks,
    ec

  • How to make a new line item appear in a sales order in VA01 transaction?

    Dear All,
    I am trying to create a SO with single line item with quantity 100.
    Upon hitting the 'Enter' key, if the available quantity is less than the requested quantity (say 20), it takes me to an availabilty control screen which has a push-button 'One-time delivery' on the application tool bar.
    Upon clicking on this button, it takes me back to the main screen of VA01 where I currently see only one line item with quantity 100 and confirmed quantity 20.
    My requirement here is to make two line items appear, one with quantity 20 and the other with quantity 80, once I navigate back to the main screen of VA01 after clicking on the push-button 'One-time delivery'.
    Please provide me your valuable inputs. Any kind of help is highly appreciated.
    Useful answers never go unrewarded.
    Regards,
    Sreekanth Reddy B.

    Hi Sreekanth ,
    creating line items based on the confirmation qty can be done thru config, not thru ABAP,standard SAP will gives you options to create a new line item for unconfirmed qtys.
    check with ur functional consultant or try to post in SD /APO forums.
    regards
    Prabhu

  • Repair request for Delta load? Orders missing in Billing line Items

    Hi
    I am using BW 3.5; Some Orders are missing in BW for Billing line item reports (2LIS_13_VDITM) according to the users.
    The report is based on Cube directly, ODS is not used. I planned to do a repair full request for this month's data so as to get the missing orders.
    Could you please advice me on correct procedure to do that? Delta loads runs every day and todays delta is completed.
    Thanks and BR
    P.B

    While it's usually recommended to execute setups during "quiet time", it's not required. Especially in this case. Since you're going to be restricting the setup to only extract a range of Billing Documents that are representative of the dates of data missing (or purely the identified missing documents), there is no need to wait for "quiet time" because you'll pick up the data either in your Full Repair extract or in the delta extract. Depending on how the target InfoProvider for this data is setup (cumulative v. non-cumulative), you may have to look out for duplicate data.
    My recommendation would be to run your setup for only those documents that have been identified as missing. That way, you're limiting the amount of data that's required to be extracted to the setup table and then into BW, but also will remove any risk of duplicate data in your target InfoProviders.

  • Billing line items with discount

    Hi SAP gurus,
    I have situation going on here at my current project.  Our client is wants to add a discount line with billing line item (In billng document) ?  Can you pls. suggest me the best path ?

    Hi Laxmipathi,
    I haven't found answers to my questions so far.  I tried to lookup for these questions online and on sdn as well...
    I just want to make sure that I don't make any mistake during my current project.  Can you pls. help?
    Thanks.

  • SD Billing line items

    Hi,
    I want to post billing document item values in customer account not total amount of my invoice.
    process open items by Billing line item.
    Thanks
    RK
    Message was edited by: Rajkumar Talabathula

    Thanks for your response.
    This creates several billing documents depends on criteria in copy control but i am looking for under one invoice its line items value in customer account(open items).
    Message was edited by: RK Talabathula

  • Relationship accounting and billing line item

    Hello,
    I have a fairly simple question. Is there a way to exactly determine from which billing line item an accounting line item was derived?
    In other words, I have an accounting line item and want to know to which billing line item it belongs.
    My question is purely focusing on line item level.
    Thanks in advance
    Stephan

    Hello,
    I think thats because the invoices have not hit FI yet.
    I feel this is more of a configuration issue and not any development or ABAP issue.
    Check with your SD/FI functional consultant. But usually these fields should be populated.
    We had lot of reports based on this logic in my previous assignments.
    cheers,
    Sushil Joshi

  • Display conditions as billing line items

    Hello,
    I have a sales order with one line item.  This line item is mapped to 2 conditions.  Everything works fine.
    When I generate a billing document, I get only 1 line item (also expected).
    But I would like my billing document to show the conditions.  This is because I'd like my customer to see a complete breakdown of all the prices that were used.
    Is this possible in SD? If so, how?  Thanks!

    If I understood correctly , you have a sales order one line item with 2 conditions , the same order if you do the billing only one condition is appearing.. ?
    If yes then check the pricing analasys in Billing , then check in pricing procedure if Requirement-24 has been assigned againes missing condition type.

  • Read only account line item appears writable in the webform

    Hi All,
    We are using Hyperion Planning 11.1.1.2.We have a line item called "Salary" under account which is set to read only.Its parent "Compensation" has the security set as IDesc(writable).
    The line item Salary is used in 2 forms.In one form it appears as readonly and in the other it appears as writable.Both the forms are identical except for the change in member in custom dimension for which security is not applied.
    Ideally this line item has to appear as readonly.
    Can anybody throw some light on this issue?
    Thanks in advance,
    Malini

    Hi,
    Can you just try this,edit the first form that works, do a save as and give it a name, change the custom dimension member. save. run. Is it the same?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Relation between Billing  line Item and Accounting doc entries

    Hi all
    when r line items in Accounting doc gets generated for a billing doc.
    for ex. if there exists a Billing Doc with 2 lines
    is there any relation to the item in the Billing Doc
    to the Accounting doc line items.
    thanks

    Hi,
    In some situation it is possible that there is a link but in the most situation you use summarization to minalize the number of line items created by invoice (like one line for VAT, general discounts). The total ammount from the customer is the same as on the billing document.
    When you want to have details by line you can found them in CO-PA.
    Paul

  • Extra Line Items Appearing in Invoice

    Dear Experts,
      For certain Invoices extra line items are appearing which is not part of our product.
    Example I have created an invoice for OPCBULK
    but in invoice it is appearing as
    OPCBULK -
    OPC (BULK)H.2
    OPC (BULK)H2
    OPC (BULK)H
    What can be the issue here. Please help. Thanks.

    Hi,
    I think you are creating invoice with reference to delivery document and in delivery document you have maintain batch split so batch split items are appearing in invoice.
    Check delivery
    Kapil

  • Long text for line item appears twice in my PO form...

    Hello Experts,
    I am wondering why my long text for my 1st line item is appearing twice. In my PO, I only
    maintained a long text for my 1st PO line item appeards twice. below is my code:
    /E          ITEM_LINE_1
    IZ           &EKPO-EBELP&,,&EKPO-TXZ01&
    IZ           ,,&EKPO-EMATN&,,&EKPO-MENGE&,,&EKPO-MEINS&,,&EKPO-UMREZ&,,&EKPO-NETPR&,,
    =           &EKPO-NETWR&
    /:           DEFINE &LV_TEXTNAME& = ''
    /:           PERFORM GET_LONGTEXT_ITEM IN PROGRAM ZMMRP0008
    /:           USING &EKPO-EBELN&
    /:           USING &EKPO-EBELP&
    /:           CHANGING &LV_TEXTNAME&
    /:           ENDPERFORM
    /:           INCLUDE &LV_TEXTNAME& OBJECT 'EKPO' ID 'F01'
    The element 'ITEM_LINE_1' is called per line item. So in my case, 3 times. The INCLUDE statement
    at the end of the element is for the longtext. I am now confused as to why it appears twice for the 1st line item.
    Thank you guys and take care!

    Hi,
    You can debug and check whats happening there.
    Regards,
    Ram

  • Manual bill line item

    Hi All,
    We are creating manual billing for a particular period and we mention a certain line item type while doing so.I would like to know that after creation of manual bill doc,where does the entry for this bill doc with its line item type gets posted.I checked DBERCHZ but it does not have entries for manual bill docs.Also, i would like to know the difference betweeen DBERCHZ DBERCHZ1 and DBERCHZ3.
    Thanks,
    Shreeraj

    I seem to have figured out the join...
    --THE FOLLOWING QUERY GETS FROM BSEG_CALC_LINE
    --TO THE RATE COMPONENT CHARACTERISTIC TABLE
    SELECT * FROM CI_BSEG S
    INNER JOIN CI_BSEG_CALC_LN L ON S.BSEG_ID = L.BSEG_ID
    INNER JOIN CI_SA SA ON SA.SA_ID = S.SA_ID
    INNER JOIN CI_SA_RS_HIST H ON SA.SA_ID = H.SA_ID
    INNER JOIN CI_RS RS ON H.RS_CD = RS.RS_CD
    INNER JOIN CI_RC RC ON RC.RS_CD = RS.RS_CD
    INNER JOIN CI_RC_CHAR RC_CH
    ON RC.RS_CD = RC_CH.RS_CD
    AND RC.EFFDT = RC_CH.EFFDT
    AND RC.RC_SEQ = RC_CH.RC_SEQ
    Thanks,
    ec

  • Old deleted items appearing again in trash

    Hello,
    I have been reviewing my trash of late and I have noticed that items that I have previously deleted and subsequently emptied from the Trasn Car and re-appearing. Yesterday my trash was empty and today there are items appearing as having been deleted on 17th December???
    Anyone know why this is?
    Thanks

    Have you tried using the Secure Empty Trash option?
    There may be a solution in this article:  What to do when the Trash won’t empty
    Mountain Lion (10.8.1)
    Use Software Update or the OS 10.8.4 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • Deleted line item appears in BI report

    Helllo Gurus,
    How can we take care of deleted line items or sales order in sap BI.
    One of teh user came up to me and said even though i delete the line item in ECC but i am able to see in BI report.I thought it has something to do with ROCANCEL Field.
    In addition to  that my flow is 3.5 and we are reporting on DSO.So can you suggest how to take care of it.
    Thanks in advance.,
    Regards,
    AL

    Hi,
    I have worked with similar scenarios and my understanding is that whenever a order line is deleted, delta comes properly through LO data sources.
    You are using 2LIS_11_VAITM which should have a ROCANCEL field which you will need to load delta properly specially in case of deleted records.
    In your DSO, add 0RECORDMODE info object and map it to ROCANCEL (you will have to add this object in your info source as well as you are using 3.5 flow).
    Now, you do not need to worry about anything, if a order line is deleted in ECC and you are doing a delta load using 2LIS_11_VAITM, you will get the deletion record and it will delete the record in your DSO (I should say ODS as you are using 3.5) also.
    The keys of your DSO must be Sales Order Number and Sales Order Line Item.
    As far as I remember, deletion record comes with a value of R in ROCANCEL and X is used for Before Image.
    Regards,
    Gaurav

Maybe you are looking for