Billing block at item level still billing is possible for the item.

Hi friends,
I have billing blocks at header and item level. When the block at the header and item  levels are  active no billing takes place, but if the block at header is removed then an item with a billing block is also billed. How do i stop this ? Please suggest.
Regards,
Udaynath.

Rectified. It was wrong copying requirement at the item level.
Regards,
Udaynath.

Similar Messages

  • Block the Material at Item level in Sales Order automatically for delivery

    Hi!
    My business scenario needs a material to be Ckecked for Inspection after raising the Sales Order by thirdparty person. So, I need to block that particular material at Item level automatically for delivery and rest of the line items can get delivered. I can do this by selecting the reason for Block at Item level manually, but I want the system to get detemine this block. And one more thing is that there is NO Quality Management module for this. So, let me know what I need to configure for this effect.   Thank you.....

    hi,
    pl check the user exit " userexit_save_document_prepare" or "userexit_save_document".
    Take the help of your abaper to see if the logic written here can affect the item level block in the sales order for inspection. Create new reason for the item level block and have it triggered with this exit. Instead of hard coding which might require regular intervention of abaper for code changes for the business to be able to manage it, maintain a master data in the material master against some field with a key.
    now use that key to identify if these materials require to be blocked at the sales order level for inspection. To release this item again the user has to go in VA02 mode to release the block. Let this be done after the inspection of that material.
    regards
    sadhu kishore

  • When i double click on and item in the firefox downloads window the item dosn't open, left clicking on the item still dose not give me the choice to "open". how to fix this problem thanks

    When i double click on an item in the firefox dowloads window the item dos'nt open.Left clicking on the item dose not give me the choice to "open" the item.
    the downloaded item is a pdf file of 59 kb, and was downloaded using adobe acrobat version 5

    I have sort of the exact same problem. Extremely far away from user friendly
    I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
    And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
    All in all this gives a lot of changes just to enter an event.
    Command N
    I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

  • Cross Company Stock Transfer- Please check excise base for the item is zero

    Hi,
    My scenario is Cross company Stock transfer (Two different Company Codes)
    I have done following steps :
    1.Create Purchase Order
    2.Create Outbound Delivery for Purchase Order
    3.Post Goods Issue for Delivery
    4.Creating Billing Document
    5.Creating Excise Invoice
    6.Printing of Excise Invoice
    7.Post Goods Receipt for Stock Transport Order
    Till MIGO there is no problem.
    I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
    "Please check excise base for the item is zero" - Message no. 4F121
    Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
    Pl. help
    Thanks
    Vikas

    Hi
    The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
    Hear you can maintain all the chapter id, register A or C, etc
    and then try doing GR,
    The other way and the permanent solution is
    VPRS or equivalent
    Condition class B Prices
    Calculat.type C Quantity
    Condit.category  H
    Cond.control H Condition value fixed
    Condit.origin A Automatic pricing
    In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
    Regs
    Niti Narayan

  • Make goods receipt for the items w/difference after the proof of delivery

    Hello experts,
    I do like to know how finish the process of proof of delivery, when I does have items with differences over the quantities that arrived to my client. For example, one sales order for 20 units. I did the delivery note, and posted the goods issue. Then I did the Proof of Delivery, confirming 19 units and the deviation reasons, saving the document. Then I made my billing document for 19 units of material.
    The deviation reasons was a damage material, my questions is: How does make goods receipt for the items with difference over the quantities after the confirming of proof of delivery?
    Thanks in advance
    Edited by: Johnattan Company on Sep 8, 2009 3:45 PM
    Edited by: Johnattan Company on Sep 8, 2009 3:59 PM

    Hello Chetan,
    Thinking in the process, I have found a solution to do it. If the differences was caused by unknowing reasons, like stolen or whatever reasons and the material will not enter again in the warehouse, we donu2019t need to make any process.
    But if the causes was a broken material, a lapsed date expired or unknowing others reasons as a consequence the material will enter again in the warehouse; I have customized a returns order, and a returns item with the option not relevant for billing to conclude the process.
    Thanks for your help.

  • Please check excise base for the item is zero

    Hi,
    My scenario is Cross company Stock transfer (Two different Company Codes)
    I have done following steps :
    1.Create Purchase Order
    2.Create Outbound Delivery for Purchase Order
    3.Post Goods Issue for Delivery
    4.Creating Billing Document
    5.Creating Excise Invoice
    6.Printing of Excise Invoice
    7.Post Goods Receipt for Stock Transport Order
    Till MIGO there is no problem.
    I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
    "Please check excise base for the item is zero" -  Message no. 4F121
    Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
    Pl. help
    Thanks
    Vikas

    hi
    can u please share how u slove , we also face same issue
    Thanks
    Leo

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • What is the source of this Crawl Error `The item could not be indexed successfully because the item failed in the indexing subsystem`

    Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
    The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
    (last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
    The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
    The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
    Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
    NodeRunnerIndex: Journal[SP4d91e6081ac3]:
    Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    NodeRunnerIndex: Remote
    service invocation: method=RollbackGeneration() Service = {  Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter  Component: SP4d91e6081ac3I.0.0.IndexRouter  Exposer Name: GenerationContentTarget} terminated
    with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
    NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
    Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
    Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
    Other (maybe related) observations 
    Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
    Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
    All journal users have completed checkpoint Checkpoint[7560-7569].
    Also just before the errors start to appear a TimerJob starts: Name=Timer
    Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
    Search Topology for application 'Search Service Application' with active topology [...] and Activating
    components. Previous topology:   ---  New Topology: TopologyId: [...] followed by Starting
    to execute Index RedistributeData method.
    And right after these two evente the errors start to occur. (each row is a ULS log enrty)
    INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
    IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
    Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    The Question What is causing this? And how to prevent it? It happend twice in two weeks
    nows. Out of the blue, no config change has been made, all disks have enough space.
    Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
    Stop all crawls.
    Wait a few minutes to let the crawl come to a complete stop.
    Reset the index (clearing all!)
    Start a full-crawl. In the meantime no search is available to the end user (boohoo!)

    Hi,
    I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
    https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
    http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
    From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
    Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
    https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
    https://technet.microsoft.com/en-us/library/dn535606.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Item category RENN is not defined for this item

    Hey SD experts,
    I've created a sales order with free of charge and standard items.
    Now, I'm trying to create a return order with reference to this sales order.
    I got this error message: Item category RENN is not defined for this item.
    I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
    Why am I getting this error message then ?
    Regards,
    Bahia.

    Dear Bahia,
    Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
    Once again check item category determination through VOV4 transaction for the combination of
    Your returns order document type+Itemcategory group-->RENN.
    I hope this will help you,
    Regards,
    Murali.

  • 'Item category SUBC is not defined for this item'

    Hi,
    When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
    Please let me know what should i do?  Thank you.
    I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...

    Dear Laa,
    This is due to not done the itemcategory definition and determination.So
    First you define the itemcategory  SUBC through VOV7 transaction (By copying standard TAN)
    Then do the itemcategory determination through VOV4 transaction for this combination
    Sales document type+Itemcategory group--->Itemcategory
    Itemcategory group is different from itemcategory.
    Itemcategory group maintained in the Material master data
    The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
    I hope this will help you,
    Regards,
    Murali.

  • Calendar Issues - "Repitition is not working for the item you tried to access"

    I ran into an interesting error when troubleshooting a calendar issue today, wondering if anyone has seen it.
    Exchange 2010 SP2 latest RU, Outlook 2010
    User changes then start time for a recurring meeting, changes in everybody's calendar but hers 9still shows in her calednar as the original start time)
    Logged into OWA to see if her claendar reflected the correct start time there - no, still  shows the old start time.  So I open the meeting, have a quick look, and the following error pops up:
    "Repitition is not working for the item you tried to access.  It's possible either the start or end date are not correct"
    Has anyone seen this error in OWA before?
    TAG

    Hi,
    Please double check whether the updated start time and end time are changed properly in attendees’ calendar. Also confirm whether the updating message is in the organizer’s sent items both in OWA and Outlook.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

    The following error comes up when I try to install the updated Firefox:
    "The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
    When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
    Thanks.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • If my iPhone 5 has a cracked screen, can I still trade it in for the iPhone 6?

    If my iPhone 5 has a cracked screen, can I still trade it in for the iPhone 6?
    I know there is the promotion to trade in for a free iPhone 6, but will Verizon take a cracked phone?
    I would hope at the least to still get a discount if not a straight up trade.
    Appreciate any info if anyone knows.

    You can get an appraisal for your phone here https://www.trade-in.vzw.com/home.php5
    I think to get the best price towards an iPhone 6 you have to have the appraisal submitted and new phone ordered by tomorrow (9/30/14) You buy the new phone on contract price then they email you a Verizon gift card after they receive your phone and make the final decisions on how much to give you. (Suppose to take 2 weeks after mailing old phone in)

Maybe you are looking for