Billing call data for previous months
I have always been on paperless billing to save money. As Kerry said in a previous post to encourage paperless billing:
"Get organised
Signing up to paper-free billing with My BT can save you time – and it makes finding your latest bill much easier than searching through endless cabinets and drawers for that elusive bit of paper. Copies of your bills are stored online for 15 months, so they're always there to view, download and print when you need them. One secure online log-in gets you instant access to your bill.:"
I now find that you can only look at call data for the latest months bill. It is no good having paperless billing if you have to use loads of your own paper to print out all the data.
Patty-L wrote:
@ john46 You could of course store the data on your computer in pdf format each month I do and can go back years.
Thank you John for the information it has worked (I can now save on paper usage)
Regards Pat
And Ink, and wear and tear on the printer
toekneem
http://www.no2nuisancecalls.net
(EASBF)
Similar Messages
-
SAP XI runtime workbench doesnot display data for previous months
Hi,
We are experiencing an issue in our XI system. When we try to extract messages from the Integration engine we recieve data only for two months including the present month and not for previous months.
Can you pleaes suggest which SAP job or any set parameter is creating such a scenario.
Thanks in advance and suggestion are welcome.
Regards,
SubhramYou should check the archiving/deletion jobs in the PI Admin Check guide..
Kind regards,
Mark -
Need reporting logic for Previous months sales compared to current month
Dear Folks,
I need to design a report that should give cumulative sales for the month compared with cumulative sales for the same date for previous months e.g. Sales upto 21st May should be compared with sales from 1st to 21st April, from 1st March to 21st March and so on.
Can anyone provide me a logic or CMOD code how to develop this report.
Will be great helpful.
Thanks in Advance.
RakeshHi Rakesh,
To accomplish the required output, you need to create variables that are input enabled and of processing type user eixt in the columns of your report in the query designer. I am assuming that, you would have atleast one variable which is input enabled and of processing type manual entry.
The user would input a date ( for example may 21) in this variable. You need to capture this value in the user eixt in I-STEP 2. From this value you need to calculate the previous month and pass it to the user exit variable. Below is a sample code,
----variable ZPREVDATE:pass the to value from variable ZCURRDAT -
DATA : LV_CALDAY TYPE SY-DATUM,
LS_T_VAR_RANGE TYPE i_t_var_range,
LV_YR(4), LV_MN(2), LV_DY(2).
WHEN 'ZPREVDATE'.
IF i_step = 2.
READ TABLE i_t_var_range INTO LS_T_VAR_RANGE
WITH KEY vnam = ZCURRDAT'.
LV_CALDAY = LS_T_VAR_RANGE-high.
LV_YR = LV_CALDAY+0(4).
LV_MN = LV_CALDAY+4(2).
LV_DY = LV_CALDAY+6(2).
LV_MN = LV_MN - 1.
CONCATENATE LV_YR LV_MN LV_DY INTO LV_CALDAY.
ls_range-low = LV_CALDAY.
ls_range-opt = 'EQ'.
ls_range-sign = 'I'.
APPEND ls_range TO e_t_range.
ENDIF.
The above code is a rough code that would help you to acheive your logic
Regards,
Prem -
Check 3G data usage for previous months?
Where do I go to check my 3G iPad2 data usage for previous months?
I look in the Settings / Cellular Data / View Account - but only see the current month.
I tried to create a My Verizon account on the verizon wireless web site using my iPad phone number but I get the error "We're sorry, but at this time you cannot register your account for My Verizon. Please access your account information on your device."
I installed the "My Verizon" app for ipad from the App Store but I get "System under maintenance. Please Try again." all the time.
Is there someplace else I can see previous months data usage? I would like to get a sense how much I have used in the past.
Thanks
JoeDear AdamE+VZW and AntoniioC_VZW
Have you actually tried the advice you gave? I'm 6 days into my billing cycle. The furthest back I am able to see data traffic is 6 days.
The specific navigation path "View Bill --> I Want To... --> Month ---> Usage Details --> Data" does not currently exist.
As far as I can tell, AdamE's claim that "You can easily see the past six months of data usage on our website " is untrue.
The report generated by the "Account Analysis" is plainly false as well. It reports that both of my data phones used exactly 1024.00 MB in February, March, and April. (sic: 2 decimal points!!). That is an exceedingly unlikely coincidence, and flatly contradicts the current month summary which reports that one of my phones has used only 23 MB, and the other line even less. The "Account Analysis" has a bug so serious as to render its data traffic output absolutely useless. Since it is providing false output, it should be removed from the site until it can be fixed to generate accurate reports.
I can't even find a way to see my prior month's summary bill, though I can't be sure it is unavailable since the site is large. But I can say that when a customer spends 15 minutes clicking around a site trying to find their prior month's bill (not merely the bill's dollar amount, but the bill's usage summary) and fails, the site navigation should be improved!! -
have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?
Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport -
Variable last date of previous month/last date of current month
Hello Experts,
I am facing an issue while designing a query.
Requirement is like this.
Report will be run on monthly basis.so on execution of report, it should prompt for month/year.
now on report there are two columns for which I have to get data on date basis(last date of previous month and Last date of current month).
Can anyone tell me is there any standard variable for this? what is it?
or how to achieve this?
Regards,
NiravHi,
See if this post in this forum can help you.
Re: Last date of a month
Regards
Shalabh Jain -
I added Icloud to join my calendar on my phone to another person. It erased all history date from previous months. how do I get that data back?
i found the answer to the first part: reboot and keep hold of command+r
this gave me a list of options
one of them was to reinstall lion from fresh
i went for this
dont know why... but all forum posts i read said u should delete hard disc? theres an option for this
which is the right option?
any suggesstion where i go to register new mac would be great
thanks -
Previous month first data and previous month last date
can any body have query to get previous month first date and previous month last date.
Ex: First day of the previous week:
TIMESTAMPADD(SQL_TSI_DAY,-6, (TIMESTAMPADD(SQL_TSI_DAY, DAYOFWEEK(CURRENT_DATE) *-1,CURRENT_DATE)))
Last day of the previous week:
TIMESTAMPADD(SQL_TSI_DAY, DAYOFWEEK(CURRENT_DATE) *-1,CURRENT_DATE)
can anybody have it for first day of the previous month,last day of the previous month?
Edited by: user12255470 on Apr 7, 2010 3:30 AMHi,
1st day of previous month :
TIMESTAMPADD(SQL_TSI_DAY, ( DAYOFMONTH(TIMESTAMPADD(SQL_TSI_MONTH,-1,CURRENT_DATE)) * -1) + 1, TIMESTAMPADD(SQL_TSI_MONTH,-1,CURRENT_DATE))
last day of previous month :
TIMESTAMPADD(SQL_TSI_DAY,DAYOFMONTH(TIMESTAMPADD(SQL_TSI_MONTH,-1,CURRENT_DATE)) * -1 , TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD(SQL_TSI_MONTH,-1,CURRENT_DATE)))
Please mark Q answered and award points for correct answers !
Thanks
Alastair -
Anyone else getting a message that they have almost used all of their data for the month?
We just got a message saying that we have used 90% of our data for the month and we are only 10 days into the billing cycle. I looked at our account on line and it says that we aren't even close to using our total data for the month. When does all of the stupid stuff stop? When I switched to Verizon 10 years ago, they were great. Great customer service, great plans, etc. Now that has gone away. The 4G service is an absolute joke. Where I used to have great service, there literally is none, and the phone won't even switch to 3G if it is in a bad area. I travel through a major city every day and I am amazed at how crappy the service is.
Now I'm getting messages that aren't even correct??? I have a lot of lines on my account and I don't want to go elsewhere, especially since I live in the country and Verizon is the only way to get decent internet service, but this is getting rediculous. I guess listening to the customers doesn't matter anymore as long as they get their money.Hi GeoffPrice
I'm sorry to hear your getting alerts that are incorrect. Let's get to the bottom of this. What zip code are you in? Are any other devices having the same issue on your account?
JoeL_VZW
Follow us on Twitter @VZWSupport -
Min date for each month from list
Hi all,
I need to select only minimal date for each month from this sample query:
select date '2011-01-04' as adate from dual union all
select date '2011-01-05' as adate from dual union all
select date '2011-01-06' as adate from dual union all
select date '2011-02-01' as adate from dual union all
select date '2011-02-02' as adate from dual union all
select date '2011-02-03' as adate from dual union all
select date '2011-10-03' as adate from dual union all
select date '2011-10-04' as adate from dual union all
select date '2011-10-05' as adate from dual So the result should be:
04.01.2011
01.02.2011
03.10.2011How do I perform it?WITH dates
AS (SELECT DATE '2011-01-04' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-01-05' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-01-06' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-02-01' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-02-02' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-02-03' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-10-03' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-10-04' AS adate FROM DUAL
UNION ALL
SELECT DATE '2011-10-05' AS adate FROM DUAL)
SELECT TO_CHAR (MIN (adate), 'DD.MM.YYYY') adate
FROM dates
GROUP BY to_char(adate, 'YYYY.MM')
ADATE
03.10.2011
01.02.2011
04.01.2011 -
Report to pull next call date for all equipment
Hello,
Is there a report in SAP to get all the next call date for all of our equipment within our company?
Thankshi
in IP24 use the multiple selection to select all the equipment and in the selection screen under maintenance dates select maintenance status as W/ and execute system will display the next planned date for the equipment selected -But with all the call object which are on hold
regards
thyagarajan -
User Profile Data for One Month in ST03N
Dear All,
I have one question for a similar requirement.
I want to see the User Profile data for last month (e.g.August)
I navigate through the same path as described by you.
ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
Thanks in advance.
Best Regards,
JayeshDear Shailesh,
Thanks for the very prompt and accurate response.
However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
Kindly advice.
Best Regards,
Jayesh -
Can i add data for current month only
can I add data for current month only?
Knowing your plan options is important marlingut! So that we are able to provide correct information, what make and model phone are you trying to add data too? Is this device already activated on your account?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
Maintenance Plan which has two call dates for year
Hi all,
I need to create a Maintenance Plan which has two call dates for year. The dates have to be the last Sunday of March and the last Sunday of October for the same Maintenance Plan. Does anyone know the solution? Please do throw some light on it.
Thanks
S
Edited by: Sara Silva on May 14, 2008 11:39 AMSara,
You could do this without user-exits...
Create a factory calendar with two working days. Then create a maintenance plan with a package of 1 day.
Once scheduled it should produce the required maintenance cycles.
There are two things you need to be very careful about:
1. Keep the factory calendars updated, say, 3 years into the future
2. Ensure you comprehensively test the IP30 transaction
PeteA
[www,pjas.com] -
Generate all the dates for given month
Hi all,
How can I generate all the dates for given month? For example If I give Feb-2008 then it should display all the dates from 01/02/2008 to 29/02/2007
Thanks,
SujnanThis question was expanded (and answered) at
Monthly Report
You can also search for "all days in month".
Maybe you are looking for
-
ITunes purchased songs: is there any way to play them on a non apple produc
So I have an iPod. I have many songs purchased from iTunes. I have a Verizon wireless cellphone with Vcast. This plays music using Windows Media Player (WMP). Is there any way on God's gree earth to import my purchased songs into WMP so I can place t
-
Need to turn off-on power of PAP2T to re-register
I have a PAP2T. We loose connection randomly during the day. when it happens we need to unplug and reconnect the power supply to the pap2T to reconnect and register to our VOIP provider and have the green light on again. If not it will re-register in
-
Dlv. type (dlv. catgry for mat. 1133 and BWART ) cannot be determined
Hi, Am getting the error while doing the transaction me2o the error is like this"Dlv. type (dlv. catgry for mat. 1133 and BWART ) cannot be determined" Message no. VL295 please help me on this
-
Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)
Hi! everyone, As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so
-
My illustrator won't open after I install
my illustrator won't open after I install